Program Bramat2017

Braov - ROMANIA
March 8 - 11, 2017
PROGRAM
Conferences Partners:
Namicon, Olympus, Innovatest, Sartorom, Standard Service

Medist Life Science, Total Spectrum
10th International Conference on Materials Science and Engineering BRAMAT 2017
PROGRAM
Conference Steering Committee
Daniel MUNTEANU, Conference Chairman

Vicerector of Transilvania University of Braov, ROMANIA
Ioan Vasile ABRUDAN
Rector of Transilvania University of Brasov, ROMANIA
Andreas ANAYIOTOS
Rector of Cyprus University of Technology, Limassol, CYPRUS
Maria DINESCU
National Institute for Lasers, Plasma and Radiations Physics, Bucharest, ROMANIA
Joseph KOST
Dean of Engineering Sciences Faculty, Ben-Gurion University of the Negev, Beer Sheva, ISRAEL
Teodor MACHEDON-PISU
Dean of Materials Science and Engineering Faculty, Transilvania University of Brasov, ROMANIA
Cornel SAMOILA
Romanian Technical Sciences Academy, Transilvania University of Brasov, ROMANIA
Doru M. STEFANESCU
The Ohio State University, Columbus, USA
Filipe VAZ
Vice-Rector of Minho University, Braga, PORTUGAL
Conference Local Organizing Committee Conference Sections
Bogdan ANDREESCU I. Metallic materials

Liana BALTES II. Biomaterials
Tibor BED III. Ceramics, polymers and
Dorin CATANA composite materials
Daniel CRISTEA IV. Surface engineering
Aurel CRISAN V. Nanomaterials
Catalin CROITORU VI. Welding engineering
Camelia GABOR VII. Safety engineering
Ioana GHIUTA VIII. Magnesium science and
Ioan MILOSAN engineering
Dana MOTOC
Sorin MUNTEANU Conferences Halls:
Arthur OLAH Main Hall A Aula, 41A Iuliu Maniu Str.
Alexandru PASCU Hall B Room UI 2, 41A Iuliu Maniu Str.
Mihai Alin POP Hall C Room UI 3, 41A Iuliu Maniu Str.
Ionut ROATA Hall D Room UI 6, 41A Iuliu Maniu Str.
Maria STOICANESCU Hall E Room UI 7, 41A Iuliu Maniu Str.
Mircea TIEREAN Hall F Room UII 3, 41A Iuliu Maniu Str.
Hall G Ground level, 41A Iuliu Maniu Str.
Bela VARGA
Hall H First level, 41A Iuliu Maniu Str.
Ana VETELEANU
Hall R Ground level, 29 Eroilor Blvd.
2
PROGRAM
International Advisory Committee
Horia ALEXANDRU, University of Bucharest, ROMANIA

Iulian ANTONIAC, University Politehnica of Bucharest, ROMANIA
Marioara ABRUDEANU, University of Pitesti, ROMANIA
Mustafa BENYOUCEF, Universit Cadi Ayyad - Marrakech, MOROCCO
Vasile BRATU, Valahia University, Targoviste, ROMANIA
Leandru BUJOREANU, Gheorghe Asachi Technical University of Iai, ROMANIA
Barry CARTER, University of Connecticut, Storrs, USA
Mariana CALIN, Leibniz Institute for Solid State and Materials Research Dresden, GERMANY
Denis CHAUMONT, Universit de Bourgogne, Dijon, FRANCE
Ionel CHICINAS, Technical University of Cluj-Napoca, ROMANIA
Eugen CICALA, Universit de Bourgogne, Dijon, FRANCE
Valentin CRACIUN, National Institute for Lasers, Plasma and Radiations Physics, Bucharest, ROMANIA
Daniel CRISTEA, Transilvania University of Brasov, ROMANIA
Catalin CROITORU, Transilvania University of Brasov, ROMANIA
Luis CUNHA, Universidade do Minho, Braga, PORTUGAL
Dan ELIEZER, BenGurion University of the Negev, Beer Sheva, ISRAEL
Monica FLORESCU, Transilvania University of Brasov, ROMANIA
Santiago FERRANDIZ, Universitat Politcnica de Valncia, SPAIN
Andrea GATTO, Universit degli Studi di Modena e Reggio Emilia, ITALY
Anton HADAR, University Politehnica of Bucharest, ROMANIA
Bernard KUNTZMANN, Listemann AG, SWITZERLAND
Rodica Mariana ION, INCDCP ICECHIM Bucharest; Valahia University, Targoviste, ROMANIA
Julia MIRZA ROSCA, Universidad de Las Palmas de Gran Canaria, SPAIN
Strul MOISA, Ben-Gurion University of the Negev, Beer Sheva, ISRAEL
Nir MOSCOVITCH, R&D and Business Development, Dead Sea Magnesium, ICL, ISRAEL
Cacilda MOURA, Universidade do Minho, Braga, PORTUGAL
Corneliu MUNTEANU, Gheorghe Asachi Technical University of Iai, ROMANIA
Viorica MUSAT, Dunarea de Jos University of Galati, ROMANIA
Adel NOFAL, Central Metallurgical R&D Institute, Cairo, EGYPT
Jos Luis OCAA MORENO, Universidad Politcnica de Madrid, SPAIN
Ildiko PETER, Politecnico di Torino, ITALY
Mihai POPESCU, National Institute R&D of Materials Physics, Bucharest, ROMANIA
Doina RADUCANU, University Politehnica of Bucharest, ROMANIA
Peter REM, Delft University of Technology, The NETHERLANDS
Iulian RIPOSAN, University Politehnica of Bucharest, ROMANIA
Mario ROSSO, Politecnico di Torino, ITALY
Alexander SCHREINER, Mnchner Werkstofftechnik Seminare, GERMANY
Agustin SANTANA LOPEZ, Universidad de Las Palmas de Gran Canaria, SPAIN
Hassan SHIRVANI, Anglia Ruskin University, UNITED KINGDOM
Viorel Aurel SERBAN, Politehnica University of Timioara, ROMANIA
Ioan VIDA SIMITI, Technical University of Cluj-Napoca, ROMANIA
Michael W. TAUSCH, University of Wuppertal, Institute of Polymer Technology, GERMANY
Petrica VIZUREANU, Gheorghe Asachi Technical University of Iai, ROMANIA
Ionelia VOICULESCU, University Politehnica of Bucharest, ROMANIA
3
PROGRAM
Conference Venue
Braov is situated in the central part of the country being considered the second most
important town in Romania. Located 160 km from Bucharest (Romania's capital), Braov is
surrounded by the Carpathian Mountains, being in the middle of the country at the
crossroads of the Eastern Carpathian and the Southern Carpathians. Across the mountains to
the South and East there are Wallachia and Moldavia, to the West the Banat region and to
the North the rolling hills of Northern Transylvania.
The 10th International Conference of Materials Science and Engineering BraMat 2017, will
be held at Sergiu T. Chiriacescu Aula, 41A Iuliu Maniu Str., Braov, ROMANIA.
4
PROGRAM
Program (Outline)
Wednesday, 08.03.2017
16.30: Registration (Hall H)
17.00: Presentations (Main Hall A)
17.50: Ceremony (Main Hall A)
18.30: Violin (Eszter KLEINMAN-STANKOWSKY) & piano concert (Asaf KLEINMAN)
ISRAEL
19.45: Welcome cocktail (Hall H)
Thursday, 09.03.2017
8.30: Registration (Hall H)
9.00: Opening ceremony (Main Hall A)
9.20: Companies Introduction (Main Hall A)
9.30: Coffee break (Hall H)
10.00: Plenary lectures I (Main Hall A)
12.00: Plenary lectures II (Main Hall A)
13.30: Lunch (Hall H)
15.00: Keynote and oral presentations I (Sections I, III, IV, VIII) (Halls B, C, D, E)
17.00: Poster presentations I (Sections I, III, VI) (Hall G)
15.00: Companies Workshops (Hall F)
16.00: Workshop Prelucrarea/valorificarea inovativ a deeurilor cu coninut de
metale neferoase. Aspecte economice i tehnologice (Hall F)
9.30 - 19.00: Companies exhibitions (Hall G)
19.30: Sculptures and graphics exhibition (Hall R)
Friday, 10.03.2017
9.30: Plenary lectures III (Main Hall A)
11.30: Keynote and oral presentations II (Sections I, II, III, IV, V) (Halls B, C, D, E, F)
13.30: Lunch (Hall H)
15.00: Oral presentations III (Sections I, III, IV, V, VI, VII) (Halls B, C, D, E, F)
17.00: Poster presentations II (Sections II, IV, V, VII) (Hall G)
20.00: Gala dinner (ARO night bar)
Saturday, 11.03.2017
9.30: Closing Ceremony, Poster Awards (Main Hall A)
10.00: Sightseeing program meeting, 41A Iuliu Maniu Str., Braov
11.00: Visit of Bran castle
13.30: Lunch in Bran
5
PROGRAM
Program (detailed)
Wednesday, 08.03.2017
16.30: Registration
Main Hall A
17.00: Presentations
Chairpersons: Daniel MUNTEANU, Transilvania University of Braov, ROMANIA
Andreea NECHIFOR, Transilvania University of Braov, ROMANIA
17.10: The need to re-engineer engineering studies

Nachum FINGER, Ben-Gurion University of the Negev, Beer-Sheva, ISRAEL
17.30: From the Bible (as book) to the Nano-Bible (as chip)
Strul MOISA, Ben-Gurion University of the Negev, Beer-Sheva, ISRAEL
17.50: Ceremony
Special festivity and prize award
18.30: Violin & piano concert

Eszter KLEINMAN-STANKOWSKY, Asaf KLEINMAN, ISRAEL
Hall H
19.45: Welcome cocktail
Thursday, 09.03.2017
8.30: Registration
Main Hall A
Opening Ceremony
9.00: Welcome messages
Professor Dr. Eng. Ioan Vasile ABRUDAN, Rector of Transilvania University of Braov, ROMANIA
Professor Dr. Eng. Daniel MUNTEANU, BraMat Conference Chairman
9.20: Companies introduction
10.00: Coffee Break
Main Hall A
10.00: Plenary Lectures I:
Chairperson: Daniel MUNTEANU, Transilvania University of Braov, ROMANIA
10.00: P.01. In-situ and operando TEM for materials analysis

C.B. CARTER, University of Connecticut, U.S.A.
10.30: P.02. Nanotechnology and ultrasound for targeted delivery of drugs and nucleotides
J. KOST, Ben-Gurion University of the Negev, Beer-Sheva, ISRAEL
6
PROGRAM
11.00: P.03. Optimization of Au/TiO2 thin films towards optical (bio)sensing

M.S. RODRIGUES, J. BORGES, Centro de Fsica da Universidade do Minho, Campus de Gualtar, Braga, PORTUGAL
D. COSTA, Centro de Fsica da Universidade do Minho, Campus de Gualtar, Braga, PORTUGAL
Centro de Biologia Molecular e Ambiental, Universidade do Minho, Campus de Gualtar, Braga, PORTUGAL
R.P. DOMINGUES, Centro de Fsica da Universidade do Minho, Campus de Gualtar, Braga, PORTUGAL
M. APREUTESEI, MATEIS-INSA de Lyon, FRANCE
P. PEDROSA, N. MARTIN, Institut FEMTO-ST, UMR 6174 CNRS, Universit Bourgogne Franche-Comt, Besanon,
FRANCE
E. ALVES, Instituto de Plasmas e Fuso Nuclear, IST, Universidade de Lisboa, Lisboa, PORTUGAL
N. P. BARRADAS, Centro de Cincias e Tecnologias Nucleares, IST, Universidade de Lisboa, Bobadela LRS, PORTUGAL
P. SAMPAIO, Centro de Biologia Molecular e Ambiental, Universidade do Minho, Campus de Gualtar, Braga,
PORTUGAL
F. VAZ, Centro de Fsica da Universidade do Minho, Campus de Gualtar, Braga, PORTUGAL
11.30: Coffee Break
Main Hall A
12.00: Plenary Lectures II:
Chairperson: C. Barry CARTER, University of Connecticut, U.S.A.
12.00: P.04. Improvement of fatigue life and surface properties of metallic materials of biomedical interest
by laser shock processing
J.L. OCAA, J.A. PORRO, M. DAZ, I. ANGULO, F. CORDOVILLA, D. PERAL, Laser Center, Polytechnical University of
Madrid, SPAIN
J.L GONZLEZ-CARRASCO, National Center for Metallurgical Research (CENIM-CSIC), Madrid, SPAIN
Center for Networked Research on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), SPAIN
M. LIEBLICH, National Center for Metallurgical Research (CENIM-CSIC), Madrid, SPAIN
12.30: P.05. Properties optimisation of Ti-based biomaterials by structural design

M. CALIN, M. BNISCH, S. PILZ, S. BERA, A. GEBERT, Leibniz Institute for Solid State and Materials Research
Dresden (IFW Dresden), Institute for Complex Materials, Dresden, GERMANY
J. ECKERT Montanuniversitt Leoben, Department Materials Physics, Leoben, AUSTRIA
13.00: P.06. Photoactive polymers and composites

M.W. TAUSCH, University of Wuppertal, Institute of Polymer Technology, Wuppertal, GERMANY
13.30: Lunch
Hall B
15.00: Keynote presentations Ia (Section I)
Chairpersons: Gabriela POPESCU, Politehnica University of Bucharest, ROMANIA
Ana VEELEANU, Transilvania University of Brasov, ROMANIA
15.20: I.K.2. Description and role of interfaces during high temperature creep in nickel base superalloy
O. BOUALY, LMCN, Equipe C2MCM, Universit Cadi Ayyad, FSTG, Guliz, Marrakech, MOROCCO
N. CLMENT, A COUJOU, CEMES-CNRS, Toulouse, FRANCE
M. BENYOUCEF, LMCN, Equipe C2MCM, Universit Cadi Ayyad, FSTG, Guliz, Marrakech, MOROCCO
15.40: I.K.3. Metal based conformal profile for printed implanted antennas
I. PETER, Politecnico di Torino, Department of Applied Science and Technology, Torino, ITALY
L. MATEKOVITS, Department of Electronics and Telecommunications, Politecnico di Torino, Torino, ITALY
M. ROSSO, Politecnico di Torino, Department of Applied Science and Technology, Torino, ITALY
7
PROGRAM
Hall B
16.00: Oral presentations Ia (Section I)
Chairpersons: Cristian PREDESCU, Politehnica University of Bucharest, ROMANIA
Cornel SAMOIL, Transilvania University of Brasov, ROMANIA
16.00: I.O.1. Effect of mechanical alloying on the TiB2 particulate reinforced Al-7 wt.% Si matrix composites
S. MERTDIN, E. TEKOLU, Istanbul Technical University, Chemical and Metallurgical Engineering Faculty,
Metallurgical and Materials Engineering Department, Istanbul, TURKEY
H. GKE, Istanbul Technical University, Prof. Dr. Adnan Tekin Material Sciences and Production Technologies
Applied Research Center, Istanbul, TURKEY
D. AAOULLARI, M.L. VEOLU, Istanbul Technical University, Chemical and Metallurgical Engineering
Faculty, Metallurgical and Materials Engineering Department, Istanbul, TURKEY
16.15: I.O.2. Abnormal behavior of lattice spacing of the orthorhombic martensite in VT23 titanium alloy
S.L. DEMAKOV, I.A. SEMKINA, S.I. STEPANOV, Ural Federal University named after the first President of Russia
B.N. Yeltsin, Ekaterinburg, RUSSIA
16.30: I.O.3. Effect of powder packing on the production of Fe based shape memory alloys via powder
metallurgy approach
B. ZKAL, Istanbul Technical University, Department of Metallurgical & Materials Engineering, Particulate
Materials Laboratories, Istanbul, TURKEY
L.G. BUJOREANU, Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iai,
ROMANIA
Hall D
15.00: Keynote presentations Ib (Section III)
Chairpersons: Santiago FERRANDIZ, Universitat Politcnica de Valncia, SPAIN
Dana LUCA MOTOC, Transilvania University of Braov, ROMANIA
15.00: III.K.1. Cryoconite holes from Svalbard glacier - new source of materials
R.M. ION, ICECHIM, Bucharest, ROMANIA
Valahia University of Targoviste, ROMANIA
S. TEODORESCU, Valahia University of Targoviste, ROMANIA
R.C. FIERASCU, I. FIERASCU, ICECHIM, Bucharest, ROMANIA
I.A. BUCURICA, R.M. STIRBESCU, Valahia University of Targoviste, ROMANIA
S. GRIGORE, Popular University Emil Racovita, Piatra Neamt, ROMANIA
15.20: III.K.2. Spark plasma sintered composite compacts obtained from Ni-Fe alloy@Ni1-xMexFe2O4 pseudo
core-shell powders
I. CHICINA, T.F. MARINCA, F. POPA, B.V. NEAMU, Technical University of Cluj-Napoca, ROMANIA
V. POP, Faculty of Physics, Babes-Bolyai University, Cluj-Napoca, ROMANIA
O. ISNARD, Universit Grenoble-Alpes, Grenoble, FRANCE
Hall D
15.40: Oral presentations Ib (Section III)
Chairpersons: Michael TAUSCH, Bergischen Universitt Wuppertal, GERMANY
Ionu Claudiu ROAT, Transilvania University of Braov, ROMANIA
15.40: III.O.1. The influence of composition and calcination temperature on the phases in (Ba1-xSrZr)O3
perovskites
M. TORMAN, Sakarya University, Sakarya, TURKEY
K.E KSZ, Cumhuriyet University, Sivas, TURKEY
. EN, U. EN, Sakarya University, Sakarya, TURKEY
8
PROGRAM
15.55: III.O.2. Dielectric properties of Sr-doped BaZrO3

M. TORMAN, Sakarya University, Sakarya, TURKEY
K.E KSZ, Cumhuriyet University, Sivas, TURKEY
. EN, U. EN, Sakarya University, Sakarya, TURKEY
16.10: III.O.3. The effects of heat treatment on phase composition of mechanochemically synthesized
molybdenum silicide powders
D. OVALI, D. AAOULLARI, M.L. VEOLU, Istanbul Technical University, TURKEY
16.25: III.O.4. Analysis of temperature effect on mechanical and tribological properties of SU-8 photoresist
material
M. PUSTAN, Technical University of Cluj-Napoca, ROMANIA
R. VOICU, National Institute for Research and Development in Microtechnologies - IMT Bucharest, ROMANIA
C. BIRLEANU, F. RUSU, S. CRACIUN, Technical University of Cluj-Napoca, ROMANIA
Hall E
15.00: Keynote presentations Ic (Section IV)
Chairpersons: Jose Luis OCAA, Laser Center, Polytechnical University of Madrid, SPAIN
Alexandru PASCU, Transilvania University of Braov, ROMANIA
15.00: IV.K.1. Pulsed laser deposition of thin films: a versatile technique for structure-composition-property
studies
V. CRACIUN, National Institute for Lasers, Plasma and Radiation Physics, Magurele, ROMANIA
15.20: IV.K.2. Production of zirconium oxynitride thin films by magnetron sputtering: the quest of breaking
the chemical composition and colour restrictions
C.I. DA SILVA OLIVEIRA, D. MARTINEZ-MARTINEZ, L. CUNHA, Center of Physics, University of Minho, Campus de
Gualtar, Braga, PORTUGAL
E. ALVES, Instituto de Plasmas e Fuso Nuclear, Instituto Superior Tcnico, Universidade de Lisboa, Bobadela
LRS, PORTUGAL
N.P. BARRADAS, Centro de Cincias e Tecnologias Nucleares, Instituto Superior Tcnico, Universidade de
Lisboa, Bobadela LRS, PORTUGAL
M. APREUTESEI, INSA de Lyon, MATEIS Laboratory, Villeurbanne, FRANCE
15.40: Oral presentations Ic (Section IV)

Chairpersons: Filipe VAZ, Center of Physics, University of Minho, Campus de Gualtar, Braga, PORTUGAL
Daniel CRISTEA, Transilvania University of Brasov, ROMANIA
15.40: IV.O.1. Multi composite protective layers for geothermal conditions

A. BUZIANU, Metav- R&D, Bucharest, ROMANIA
P. MOOIU, V.A. MOOIU, Tehnoid Com Ltd., Bucharest, ROMANIA
I. CSAKI, G. POPESCU, S. SERGHIU, Politehnica University Bucharest, ROMANIA
K. RAGNARSTOTTIR, Innovation Center Iceland-ICI, Reykjavik, ICELAND
S. GULAUGSSON, Orka Nttrunnar, Baejarhals, ICELAND
D. GUMUNDSSON, Vlvk ehf, Reykjavik, ICELAND
15.55: IV.O.2. Influence of the surface manufacturing on running-in and durability of rolling micro-contacts
M. BENCHEA, Gheorghe Asachi Technical University of Iai, Mechanical Engineering, Mechatronics and
Robotics Department, Iai, ROMANIA
16.10: IV.O.3. Relative humidity effect on the adhesion energy in MEMS

C. BIRLEANU, M. PUSTAN, N.V. BURNETE, I. PINTEA, Technical University from Cluj-Napoca, Mechanical Systems
Engineering Department, Micro &Nano Systems Laboratory, Cluj-Napoca, ROMANIA
V. MERIE, Technical University from Cluj-Napoca, Material Science and Engineering Department, Micro &Nano
Systems Laboratory, Cluj-Napoca, ROMANIA
9
PROGRAM
16.25: IV.O.4. Tribo-mechanical characterization of niobium nitride thin films deposited by DC magnetron
sputtering
V. MERIE, G. NEGREA, B. NEAMU, Technical University of Cluj-Napoca, Materials Science and Engineering
Department, Cluj-Napoca, ROMANIA
M. PUSTAN, C. BRLEANU, Technical University of Cluj-Napoca, Mechanical Systems Engineering Department,
Cluj-Napoca, ROMANIA
Hall C
15.00: Keynote presentations Id (Section VIII)
Chairpersons: Nir MOSCOVITCH, R&D and Business Development, Dead Sea Magnesium, ICL, ISRAEL
Bela VARGA, Transilvania University of Brasov, ROMANIA
15.00: VIII.K.1. Effect of tungsten inert gas welding on the microstructure and the fatigue resistance of ZE41
magnesium alloy
I. PETER, C. CASTELLA, M. ROSSO, Politecnico di Torino, ITALY
15.20: VIII.K.2. Nanocarbons-Mg composites for hydrogen storage

E. RUSE, S. PEVZNER, O. REGEV, Nuclear Research Center Negev, Beer Sheva, ISRAEL
I.P. BAR, R. NADIV, V.M. SKRIPNYUK, Ben-Gurion University of the Negev, Beer Sheva, ISRAEL
E. RABKIN, Israel Institute of Technology, Haifa, ISRAEL
Hall C
15.40: Oral Presentations Id (Section VIII)
Chairpersons: Nir MOSCOVITCH, R&D and Business Development, Dead Sea Magnesium, ICL, ISRAEL
Bela VARGA, Transilvania University of Brasov, ROMANIA
15.40: VIII.O.1. Characterization of some master Mg-X system (Ca, Mn, Zr, Y) alloys used in medical
applications
S.C. LUPESCU, C. MUNTEANU, B. ISTRATE, M.G. MINCIUNA, Gheorghe Asachi University of Iasi, ROMANIA
K. EARAR, Dunarea de Jos University of Galati, ROMANIA
15.55: VIII.O.2. The effect of zirconium addition on the microstructure and mechanical properties of gravity
cast Mg-4Zn alloy using graphite and shell mould
L.C. KUMRUOGLU, E.. IFTCI, O. KARASUNGUR, K. INCE, University of Cumhuriyet, Sivas, TURKEY
16.10: VIII.O.3. The development of special magnesium alloys by ultrarapid solidification

A. BUZIANU, R. TRUSC, E. VASILE, Metav - R&D, Bucharest, ROMANIA
16.25: VIII.O.4. Experimental investigation of using frictional signature for structural health monitoring
S.M. TALAI, D.A. DESAI, Tshwane University of Technology, SOUTH AFRICA
P.S. HEYNS, University of Pretoria, SOUTH AFRICA
16.45: Coffee Break
Hall G
17.00: Poster presentations I
Section I
I.PO.1. Determination of the heat density at the interface piece tool for turning operations
M. ABDELKRIM, Universit Ouargla, Fac. Sciences Appliques, Dpt. Gnie Mcanique, Ouargla, ALGERIA
M. BRIOUA, Universit de Batna 2, Facult de la Technologie, Dpt. Gnie Mcanique, Batna, ALGERIA
A. BELLOUFI, I. REZGUI, Universit Ouargla, Fac. Sciences Appliques, Dpt. Gnie Mcanique, Ouargla, ALGERIA
10
PROGRAM
I.PO.2. Thermal processing of a titanium alloy with aeronautical applications

D.C. ACHIEI, P. VIZUREANU, M.G. MINCIUN, M.M. AL BAKRI ABDULLAH, Department Technologies and
Equipment for Materials Processing, Gheorghe Asachi Technical University of Iasi, ROMANIA
Center of Excellence Geopolymer & Green Technology (CEGeoGTech), School of Materials Engineering,
University Malaysia Perlis, MALAYSIA
I.PO.3. Tribological behavior of distaloy DC components

Y.A. AKINALP, K.E. KSZ, L.C. KUMRUOLU, Cumhuriyet University, Department of Metallurgical & Materials
Engineering, Sivas, TURKEY
I.PO.4. Fractographic analysis of a super duplex stainless steel after hot deformation
M.L. ANGELESCU, D. RDUCANU, University Politehnica of Bucharest, Faculty of Materials Science and
Engineering, Bucharest, ROMANIA
A. VINTIL, Forja Rotec Ltd., Buzu, ROMANIA,
N. ERBAN, I. CINCA, University Politehnica of Bucharest, Faculty of Materials Science and Engineering,
Bucharest, ROMANIA
I.PO.5. Influence of dynamic three point bending on the work hardening capacity of manganese steels
V. BULBUC, The National Railway Company CFR SA, Regional Branch of Passenger Rail Iasi, ROMANIA
B. PRICOP, Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iai,
ROMANIA
F. MAXIM, ASAM S.A., Iai, ROMANIA
M. POPA, L.G. BUJOREANU, Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University
of Iai, ROMANIA
I.PO.6. Oxidation of FeNiCrMnAl high entropy alloy - wear resistant alloy. Chemical and structural
characterisation
I. CARCEA, R. CHELARIU, Gheorghe Asachi Technical University of Iasi, Faculty of Materials Science and
Engineering, Iasi, ROMANIA
B. ISTRATE, Gheorghe Asachi Technical University of Iasi, Faculty of Mechanical Engineering, Iasi, ROMANIA
A.E. CIOROBTC, S.C Rancon S.R.L Iai, ROMANIA
G. BULUC, Gheorghe Asachi Technical University of Iasi, Faculty of Materials Science and Engineering, Iasi, ROMANIA
I.PO.7. Sequential electrodeposition of multilayered Sb-Te/Zn-Sn thin films for thermoelectric applications
M. BURADA, V. SOARE, I. CONSTANTIN, National R&D Institute for Nonferrous and Rare Metals-IMNR, New
Materials and Technologies Laboratory, Pantelimon, Ilfov, ROMANIA
P. CAPOT, V. DRAGU, National R&D Institute for Nonferrous and Rare Metals-IMNR, Chemical and Physical
Analysis Laboratory, Pantelimon, Ilfov, ROMANIA
M. GHITA, National R&D Institute for Nonferrous and Rare Metals-IMNR, Microscopic Characterization
Laboratory, Pantelimon, Ilfov, ROMANIA
A.M.J. POPESCU, Ilie Murgulescu Institute of Physical Chemistry of the Romanian Academy, Laboratory of
Molten Salts, Bucharest, ROMANIA
I.PO.8. Influence of the heat treatments with concentrated energy sources on the alloy steels mechanical
properties
D. CATANA, Transilvania University of Brasov, Materials Engineering and Welding Department, Brasov, ROMANIA
I.PO.9. New FeMnSi+AL alloy proposed for high damping capacity

R.C. CRACIUN, S. STANCIU, D.L. CHICET, B. PRICOP, A. ALEXANDRU, N. CIMPOEU, Gheorghe Asachi Technical
University of Iasi, Faculty of Materials Science and Engineering, Iasi, ROMANIA
I.PO.10. Cold end corrosion avoiding by using a new type of air combustion pre-heater
M. C. ENESCU, Valahia University of Trgovite, Faculty of Materials Engineering and Mechanics, Trgovite,
ROMANIA
C.M. VLADULESCU, Soctech S.A., Bucharest, ROMANIA
A. GABA, E.V. STOIAN, I. PETRE, Valahia University of Trgovite, Faculty of Materials Engineering and
Mechanics, Trgovite, ROMANIA
11
PROGRAM
I.PO.11. Titanium influence on the microstructure of FeCrAl alloys

V. GEANT, Politehnica University of Bucharest, Faculty of Materials Science and Engineering, Bucharest,
ROMANIA
I. VOICULESCU, Politehnica University of Bucharest, Faculty of Engineering and Management of Technological
Systems, Bucharest, ROMANIA
I. MILOAN, Transilvania University of Brasov, Materials Science Department, Brasov, ROMANIA
R. TEFNOIU, Politehnica University of Bucharest, Faculty of Materials Science and Engineering, Bucharest,
ROMANIA
R. TRUC, D.D. DAISA, S.C. Metav - Cercetare Dezvoltare S.R.L., Bucharest, ROMANIA
I.PO.12. Virtual testing of the composite structures made from high entropy alloys and steel
V. GEANT, Politehnica University of Bucharest, Faculty of Materials Science and Engineering, Bucharest,
ROMANIA
T. CHERECHES, I.P. LIXANDRU, UPS PILOT ARM, Trgovite, ROMANIA
I. VOICULESCU, Politehnica University of Bucharest, Faculty of Engineering and Management of Technological
R. TEFNOIU, Politehnica University of Bucharest, Faculty of Materials Science and Engineering, Bucharest,
ROMANIA
D. DRAGNEA, UPS PILOT ARM, Trgovite, ROMANIA
T. ZECHERU, L. MATACHE, CRBN Bucharest, ROMANIA
I.PO.13. Thixoforming and powder metallurgy comparative study and practical case for obtaining piston
heads
S. GALLEGO, Polytechnic University of Valencia, Applied Physics Department, Valencia, SPAIN
M.A. POP, T. BEDO, V. GEAMAN, Transilvania University of Brasov, Materials Science Department, Brasov,
ROMANIA
I.PO.14. Property improvement of subzero/cryogenic heat treated camshafts made of 8620H, 16MnCr5 and
100Cr6 steels
L.C. KUMRUOLU, A. DAYAN, University of Cumhuriyet, Engineering Faculty, Department of Metallurgy and
Materials Eng., Sivas, TURKEY
B. KARACA, E. YILDIRIM, ESTA Eksantrik San ve Tic A.. Sivas, TURKEY
I.PO.15. Reduction of CuO in H2 by using concentrated solar energy

A. LPEZ-DELGADO, M.A. ARENAS, A.J. VZQUEZ, I. PADILLA, J. GARCA-HIERRO, J.I. ROBLA, National Centre for
Metallurgical Research, Madrid, SPAIN
I.PO.16. Determination of discrete microstructural modifications in grey cast irons

M. LUCA, C. CROITORU, Transilvania University of Brasov, Materials Engineering and Welding Department,
Brasov, ROMANIA
I.PO.17. Corrosion properties of femtosecond laser textured Ti6Al4V-ELI in simulated body fluids
M.P. FIORUCCI, Laboratory of Industrial Application of Laser, Technology Research Centre (CIT), Industrial
Engineering II, Higher Polytechnic University College, University of A Corua, SPAIN
Nanomaterials and Nanoscience Laboratory, Mechanical Engineering, University of Las Palmas de Gran Canaria,
SPAIN
H. SAKR SANCHEZ, J. MIRZA ROSCA, Nanomaterials and Nanoscience Laboratory, Mechanical Engineering,
University of Las Palmas de Gran Canaria, SPAIN
A.J. LPEZ, A. RAMIL, Laboratory of Industrial Application of Laser, Technology Research Centre (CIT), Industrial
Engineering II, Higher Polytechnic University College, University of A Corua, SPAIN
I.PO.18. Passive film on titanium-tantalum alloys. 1) EIS study

J.C. MIRZA ROSCA, V. BOLAOS RODRGUEZ, A. CUADRADO, University of Las Palmas de Gran Canaria, Mechanical
Engineering Department, Las Palmas de Gran Canaria, Canary Islands, SPAIN
M. TIEREAN, L. BALTES, Transilvania University of Brasov, Materials Engineering and Welding Department, Brasov,
ROMANIA
12
PROGRAM
I.PO.19. Validation of 42CrMo4 steel for a "Mahle" piston head taking into account the thermo-mechanical
requirements
V. MRDRESCU, Transilvania University of Brasov, Department of Automotive and Transport, Braov, ROMANIA
L.G. MITU, Transilvania University of Brasov, Department of Product Design, Mecatronics and Environment,
Braov, ROMANIA
A.I. FULGA, Transilvania University of Brasov, Department of Mathematics and Informatics, Braov, ROMANIA
A. BEJINARU MIHOC, Transilvania University of Brasov, Department of Product Design, Mecatronics and
Environment, Braov, ROMANIA
I.PO.20. Tensile stress-induced structural changes associated with martensite transformations in Fe-Mn-Si
based shape memory alloys
M. MOCANU, E. MIHALACHE, R.I. COMNECI, B. PRICOP, Faculty of Materials Science and Engineering,
Gheorghe Asachi Technical University of Iai, ROMANIA
B. OZKAL, Particulate Materials Laboratory, Istanbul Technical University, Istanbul, TURKEY
L.G. BUJOREANU, Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iai,
ROMANIA
I.PO.21. Recovery of precious metals from anodic dissolution slime by extraction in ionic liquids
A.M.J. POPESCU, V. CONSTANTIN, Ilie Murgulescu Institute of Physical Chemistry of the Romanian Academy,
Laboratory of Molten Salts, Bucharest, ROMANIA
V. SOARE, M. BURADA, I. CONSTANTIN, D.V. DUMITRESCU, National R&D Institute for Nonferrous and Rare
Metals-IMNR, New Materials and Technologies Laboratory, Pantelimon, Ilfov, ROMANIA
V. SOARE, National R&D Institute for Nonferrous and Rare Metals-IMNR, Chemical and Physical Analysis
M. GHITA, National R&D Institute for Nonferrous and Rare Metals-IMNR, Microscopic Characterization
B. MIHAI, University Politehnica of Bucharest, Faculty of Material Science and Engineering, Bucharest, ROMANIA
I.PO.22. Isothermal diagrams of intermetallic phases formation in heat-resistant titanium alloys

M.A. POPOVA, A.A. POPOV, Ural Federal University named after the rst President of Russia B.N. Yeltsin,
Ekaterinburg, RUSSIA
I.PO.23. Invar type nanocrystalline compacts obtained by spark plasma sintering from mechanically activated
powders
C.V. PRIC, B.V. NEAMU, F. POPA, T.F. MARINCA, N. SECHEL, I. CHICINA, Technical University of Cluj Napoca,
Materials Science and Engineering Department, Cluj-Napoca, ROMANIA
I.PO.24. Study of the influence of grain size on the total magnetic losses in silicon steel
E.V. STOIAN, V. BRATU, F.V. ANGHELINA, I. PETRE, P.C. FLUIERARU, A. NEGREA, Valahia University of Targoviste,
Faculty of Materials Engineering and Mechanics, Targoviste, ROMANIA
I.PO.25. Mechanical properties and microstructure aspects of AlSi10Mg casting in vibrating field
M.H. TIEREAN, L.S. BALTES, A.S. BANEA, Transilvania University of Brasov, Materials Engineering and Welding
Department, Brasov, ROMANIA
I.PO.26. Study of hydroabrasive wear of hard thin films deposited on special stainless steel used at Francis
turbine blades
C.A. UGUI, Tehnical University Gh. Asachi Iasi, Science and Materials Engineering, Iasi, ROMANIA
National Institute of Research and Development for Technical Physics, Nondestructive Testing Department, Iasi,
ROMANIA
P. VIZUREANU, M.C. PERJU, C. NEJNERU, C. SAVIN, C. BEJINARIU, Tehnical University Gh. Asachi Iasi, Science
and Materials Engineering, Iasi, ROMANIA
I.PO.27. Dendritic segregation of Zn-Al eutectoid alloys

I. PETER, Politecnico di Torino, Department of Applied Science and Technology, Torino, ITALY
M. AGAPIE, B. VARGA, Transilvania University of Brasov, Department of Materials Science, Brasov, ROMANIA
13
PROGRAM
I.PO.28. Thermal stability and magnetic properties of NiCoFeCrGa high entropy alloy
. VIDA, D. MOLNR, Institute for Solid State Physics and Optics, Wigner Research Centre for Physics, Budapest,
HUNGARY
Department of Materials Physics, Etvs University Budapest, Budapest, HUNGARY
S. HUANG, Applied Materials Physics, Department of Materials Science and Engineering, Royal Institute of
Technology, Stockholm, SWEDEN
Z. MAKSA, Institute for Solid State Physics and Optics, Wigner Research Centre for Physics, Budapest, HUNGARY
Department of Materials Physics, Etvs University Budapest, Budapest, HUNGARY
C.N. QUANG, Department of Materials Physics, Etvs University Budapest, Budapest, HUNGARY
L.K. VARGA, Institute for Solid State Physics and Optics, Wigner Research Centre for Physics, Budapest, HUNGARY
B. VARGA, Materials Science Department, Faculty of Materials Science and Engineering, Transilvania University
of Brasov, ROMANIA
L. VITOS, Institute for Solid State Physics and Optics, Wigner Research Centre for Physics, Budapest, HUNGARY
Applied Materials Physics, Department of Materials Science and Engineering, Royal Institute of Technology,
Stockholm, SWEDEN
I.PO.29. Effect of phase composition of EK77 alloy on the melt viscosity and the features of the ingot
structure formation
A.Y. ZHILYAKOV, S.V. BELIKOV, A.G. GUDOV, S.P. BURMASOV, Ural Federal University named after the rst
President of Russia B.N. Yeltsin, Ekaterinburg, RUSSIA
I.PO.30. Relationship between deformation and recrystallization texture in copper wire

M.A. ZORINA, S.I. STEPANOV, M.S. KARABANALOV, M.L. LOBANOV, Ural Federal University named after the first
President of Russia B.N. Yeltsin, Department of Heat Treatment and Physics of Metals, Ekaterinburg, RUSSIA
I.PO.31. NiTi shape memory alloy used for multiple-resetting actuator for fire protection
L. BURLACU, N. CIMPOEU, N.M. LOHAN, L.G. BUJOREANU, Faculty of Materials Science and Engineering,
Gheorghe Asachi Technical University of Iai, ROMANIA
Section III
III.PO.1. Microstructural analysis and mechanical properties of Al composite materials reinforced with
particles based on Fe alloys
R.L. ASAVEI, R. CHELARIU, I. CARCEA, Gheorghe Asachi Technical University, Iasi, ROMANIA
III.PO.2. Few-layer graphene encaspulated Fe-Co nanoparticles

M. BYSTRZEJEWSKI, P. STRACHOWSKI, University of Warsaw, POLAND
I.P. GRUDZINSKI, Medical University of Warsaw, POLAND
III.PO.3. Photoactive glazed polymer-cement composites

L. BALTES, S. PATACHIA, M. TIEREAN, Transilvania University of Brasov, ROMANIA
O. EKINCIOGLU, M.H. OZKUL, Istanbul Technical University, TURKEY
III.PO.4. Photoactive polymer-cement composites for tannins removal from wastewaters

L. BALTES, S. PATACHIA, M. TIEREAN, Transilvania University of Brasov, ROMANIA
O. EKINCIOGLU, M.H. OZKUL, Istanbul Technical University, TURKEY
III.PO.5. Obtaining and characterization of calcium carbonate and wood reinforced PVC composites
C. SPRCHEZ, C. CROITORU, A. LUNGULEASA, D. CRISTEA, M.A. POP, T. BEDO, Transilvania University of Brasov,
ROMANIA
III.PO.6. Wood-polyethylene composites with alkylphosphonium and alkylammonium ionic liquids as

compatibilizers
C. CROITORU, M.C. TIMAR, A. VARODI, I.C. ROATA, Transilvania University of Brasov, ROMANIA
III.PO.7. Influence of biodegradable polymers in the waste generated from polypropylene food containers
S. FERRNDIZ, D. BERTOMEU, Univesitat Politcnica de Valncia, Alcoy-Alicante, SPAIN
14
PROGRAM
M.P. ARRIETA, Instituto de Ciencia y Tecnologa de Polmeros (ICTP-CSIC), Madrid, SPAIN

M.D. SAMPER, J. LPEZ-MARTNEZ, Univesitat Politcnica de Valncia, Alcoy-Alicante, SPAIN
III.PO.8. AlMg/AlN obtaining through thermodynamics combined with experimental investigation

R.M. FLOREA, Gheorghe Asachi Technical University of Iasi, ROMANIA
III.PO.9. Studies on novel cyanate-ester polymer blend curing by aid of dielectric broadband relaxation
spectroscopy
D. LUCA MOTOC, Transilvania University of Brasov, ROMANIA
L. HARTMANN, Fraunhofer Research Institution for Polymeric Materials and Composites PYCO, Teltow,
GERMANY
III.PO.10. Composite membranes used for the processing of some biologically active extracts
M. PASCU (NEAGU), SC Hofigal S.A. Analytical Research Department, Bucharest; Politehnica University of
Bucharest, ROMANIA
D.E. PASCU, Politehnica University of Bucharest, ROMANIA
A. COZEA, SC Hofigal S.A. Analytical Research Department, Bucharest, Transilvania University of Brasov, ROMANIA
G. ALEXANDRU, SC Hofigal S.A. Analytical Research Department, Bucharest, ROMANIA
A.A. BUNACIU, Scient - Research Center for Instrumental Analysis, (Cromatec_Plus S.R.L.), Bucharest, ROMANIA
A.C. NECHIFOR, A.R. MIRON, Politehnica University of Bucharest, ROMANIA
III.PO.11. Structural and magnetic properties of quartz sand

F. POPA, T.F. MARINCA, B.V. NEAMU, I. CHICINA, Technical University of Cluj-Napoca, ROMANIA
III.PO.12. Removal of crystal violet by adsorption onto charcoal modified developed from pine cones
N. POPA, M. VISA, Transilvania University of Brasov, ROMANIA
III.PO.13. Porous AlMg-SiC composites structure modeling by means of fractal analysis

O. RUSU, I. RUSU, Technical University Gheorghe Asachi, Iasi, ROMANIA
III.PO.14. The study of physico-chemical properties of perovskite type lanthanum manganite obtained by sol-
gel method heat treated at different temperatures
P. SFIRLOAGA, M. POIENAR, P. VLAZAN, Institute for Research and Development in Electrochemistry and
Condensed Matter, Timisoara, ROMANIA
III.PO.15. Microwave melting and processing of metallic powder MMC castings

S. SATNAM, The Northcap University, Haryana, INDIA
G. DHEERAJ, J. VIVEK, Thapar University, Punjab, INDIA
III.PO.16. Surface characterization of thermally treated lignocellulose panels

C. CROITORU, C. SPRCHEZ, A. LUNGULEASA, D. CRISTEA, M.A. POP, T. BEDO, Transilvania University of Brasov,
ROMANIA
III.PO.17. Characterization and obtaining of silicone rubber reinforced with magnetic fillers used to protect
the human factor
E.V. STOIAN, Valahia University of Targoviste, ROMANIA
J. PINTEA, National Institute for Research and Development in Electrical Engineering, Bucharest, ROMANIA
M.C. ENESCU, I.N. POPESCU, Valahia University of Targoviste, ROMANIA
III.PO.18. Natural resin materials - spectral and chromatographic investigation

N.M. TIRBESCU, Valahia University of Targoviste, Institute of Multidisciplinary Research for Science and
Technology, ROMANIA
R.M. ION, Valahia University of Targoviste; National Institute for Research and Development in Chemistry and
Petrochemistry - ICECHIM, Bucharest, ROMANIA
S. TEODORESCU, R.M. TIRBESCU, A.I. BUCURIC, Valahia University of Targoviste, Institute of Multidisciplinary
Research for Science and Technology, ROMANIA
15
PROGRAM
III.PO.19. Thermal behavior and structural properties of Poly (methyl methacrylate)/TiO2 nanocomposites for
dental applications
E. EFTIMIE TOTU, A.C. NECHIFOR, G. NECHIFOR, A.R. MIRON, O.C. OPREA, University Politehnica of Bucharest,
ROMANIA
C.M. CRISTACHE, Carol Davila University of Medicine and Pharmacy, Bucharest, ROMANIA
III.PO.20. Iron(II) embedded composites based on activated carbon used as Fenton-like catalysts
A. VAJDA, M.S. SECULA, Gheorghe Asachi Technical University of Iasi, ROMANIA
B. CAGNON, ICMN, CNRS-Universite d'Orleans, Orleans, FRANCE
I. MAMALIGA, Gheorghe Asachi Technical University of Iasi, ROMANIA
III.PO.21. Effect of dopant concentration on the structural, morphological and optical properties of NaNbO3
nanoparticles
P. VLAZAN, M. POIENAR, P. SFIRLOAGA, Institute for Research and Development in Electrochemistry and
III.PO.22. Mineral investigations of Romanian wheat and flour

R. VLADOIU, Valahia University of Targoviste, ROMANIA
R.M. ION, Valahia University of Targoviste; National Institute for Research and Development in Chemistry and
Petrochemistry - ICECHIM, Bucharest, ROMANIA
III.PO.23. Fly ash characterization from CET Govora used in masonry mortars
G. VELCIU, V. MARINESCU, National Research&Development Institute for Electrical Engineering ICPE-CA,
Bucharest, ROMANIA
A. MOANTA, SC CEPROCIM SA, Bucharest, ROMANIA
M. LUNGULESCU, G. SBARCEA, A. DUMITRU, National Research&Development Institute for Electrical
Engineering ICPE-CA, Bucharest, ROMANIA
III.PO.24. Analyzing the ballistic impact performance of laminated composites

B. DELIKTAS, A. DURMUS, Uludag University, Bursa, TURKEY
III.PO.25. Thermal and thermorheologic characterization of different polyolefin waste fractions

A. LAZAR, C. CROITORU, M. TIEREAN, L. BALTES, Transilvania University of Brasov, Materials Engineering and
Welding Department, Brasov, ROMANIA
Section VI
VI.PO.1. Induction brazing of copper components using an amorphous brazing alloy
C. CODREAN, D. BUZDUGAN, B. RADU, V.A. ERBAN, Politehnica University of Timioara, ROMANIA
VI.PO.2. Characterization of the surfaces obtained by gouging

B. FAZAKAS, T. MACHEDON-PISU, Transilvania University of Braov, ROMANIA
N. CIMPOEU, "Gheorghe Asachi" Technical University of Iai, ROMANIA
VI.PO.3. Solid state welding technologies for aerospace applications

J.H. YOON, J.T. YOO, Korea Aerospace Research Institute, KOREA
K. NO, University of Science & Technology, KOREA
H.S. LEE, Korea Aerospace Research Institute, University of Science & Technology, KOREA
VI.PO.4. A study on friction stir welding process of AA2219-t87 Al-Cu alloy

K. NO, University of Science & Technology, KOREA
J.H. YOON, J.T. YOO, Korea Aerospace Research Institute, KOREA
H.S. LEE, Korea Aerospace Research Institute, University of Science & Technology, KOREA
VI.PO.5. Overview of joining dissimilar materials: metals and polymers

E. MOLDOVAN, M.H. TIEREAN, E.M. STANCIU, Transilvania University of Braov, ROMANIA
16
PROGRAM
VI.PO.6. Overlap laser welding of thin polycarbonate sheets

E. MOLDOVAN, M.H. TIEREAN, E.M. STANCIU, Transilvania University of Braov, ROMANIA
VI.PO.7. Investigations on dissimilar brazed joints between tungsten carbide and steel
I. VOICULESCU, V. GEANT, Politehnica University of Bucharest, ROMANIA
H. BINCHICIU, S.C. Sudotim AS S.R.L. Timioara, ROMANIA
D.M. IOVNA, Transilvania University of Braov, ROMANIA
I.M. VASILE, R. TEFNOIU, Politehnica University of Bucharest, ROMANIA
VI.PO.8. Innovative research in the field of brazed joints for drill bit
T.D. TIHANOV, C. FLOREA, University of Petroani, ROMANIA
D.M. IOVANA, Transilvania University of Braov, ROMANIA
E.F. BINCHICIU, A. BINCHICIU, S.C. Sudotim AS S.R.L. Timioara, ROMANIA
VI.PO.9. Aspects regarding repetitive maintenance concept in push blades for loading equipment
T.D. TIHANOV, C. FLOREA, University of Petroani, ROMANIA
D.M. IOVANA, Transilvania University of Braov, ROMANIA
E.F. BINCHICIU, S.C. Sudotim AS S.R.L. Timioara, ROMANIA
VI.PO.10. Research regarding the post-cladding heat treatment applied on Metco 12C layer over C45 steel
A. BADEA, M.H. TIEREAN, A. PASCU, Transilvania University of Braov, ROMANIA
VI.PO.11. Dissimilar laser welding of pure aluminium and copper

E.M. STANCIU, I.C. ROAT, A. PASCU, M.H. TIEREAN, Transilvania University of Braov, ROMANIA
Hall F
15.00: Workshop Sartorom
Laboratory equipment for metal testing
16.00: Workshop Prelucrarea/valorificarea inovativ a deeurilor cu coninut de metale

neferoase. Aspecte economice i tehnologice
Importana economic a valorificrii metalelor utile coninute n deeuri industriale
D. DUMITRESCU, D. MITRICA, I. CONSTANTIN, M. OLARU, National R&D Institute for Nonferrous and Rare
Metals, IMNR Bucharest, ROMANIA
Analiza comparativ a tehnologiilor de prelucrare a deeurilor de metale neferoase. Implicaii ecologice

V. SOARE, M. BURADA, A. CARAGEA, National R&D Institute for Nonferrous and Rare Metals, IMNR Bucharest,
ROMANIA
Prezentarea proiectului Programul Operaional Competitivitate 2014-2020, contract 17/2016 TRANSECOTEH

Obiective, rezultate estimate, oferta tehnic
D. DUMITRESCU, V. SOARE, D. MITRIC, M. BURADA, I. CONSTANTIN, V. SOARE, A. CARAGEA, National R&D
Institute for Nonferrous and Rare Metals, IMNR Bucharest, ROMANIA
Hall G
9.3019.00: Exhibitions (Namicon, Olympus, Innovatest, Sartorom, Standard Service, Medist
Life Science, Total Spectrum)
Hall R (Transilvania University Multicultural Center)

19.30: Sculptures and graphics exhibition
Dan COVTARU, sculptor, "George Enescu" University of Arts, Iai, ROMANIA
17
PROGRAM
Friday, 10.03.2017
Main Hall A
9.30: Plenary Lectures III:
Chairperson: Luis CUNHA, Universidade do Minho, Braga, PORTUGAL
9.30: I.K.1. Growth kinetic of pyramidal faces of ADP at very small supersaturations
H.V. ALEXANDRU, Politehnica University of Bucharest, ROMANIA
10.00: P.08. Tribomechanical response of bare and hydrogenated amorphous carbon coated metallic
biomaterials
K. KAPNISIS, Cyprus University of Technology, Department of Mechanical Engineering and Materials Science
and Engineering, Lemesos, CYPRUS
M. CONSTANTINOU, Cyprus University of Technology, Department of Mechanical Engineering and Materials
Science and Engineering, Research Unit for Nanostructured Materials Systems, Lemesos, CYPRUS
M. KYRKOU, Cyprus University of Technology, Department of Mechanical Engineering and Materials Science
P. NIKOLAOU, Cyprus University of Technology, Department of Mechanical Engineering and Materials Science
and Engineering, Research Unit for Nanostructured Materials Systems, Lemesos, CYPRUS
A. ANAYIOTOS, Cyprus University of Technology, Department of Mechanical Engineering and Materials Science
G. CONSTANTINIDES, Cyprus University of Technology, Department of Mechanical Engineering and Materials
Science and Engineering, Research Unit for Nanostructured Materials Systems, Lemesos, CYPRUS
10.30: P.09. Reinforcement effectiveness on mechanical performances of composites obtained by powder

bed fusion
A. GATTO, E. BASSOLI, L. DENTI, S. DEFANTI, R. GROPPO, Department of engineering "Enzo Ferrari", University
of Modena and Reggio Emilia, ITALY
11.00: Coffee Break
Hall B
11.30: Oral Presentations IIa (Section I)
Chairpersons: Mustafa BENYOUCEF, Universit Cadi Ayyad - Marrakech, MOROCCO
Ioan MILOAN, Transilvania University of Brasov, ROMANIA
11.30: I.O.4. Production of open cell aluminum foam by vacuum casting method
F. MEDIK, T. SUNAR, M. ETIN, University of Karabuk, Manufacturing Engineering Department, Karabk, TURKEY
M. YAAR, University of Karabuk, Faculty of Technology, Karabk, TURKEY
L. TURHAN, TUBITAK Marmara Research Center Materials Institute, Gebze/Kocaeli, TURKEY
11.45: I.O.5. Microstructure and properties of AlCrFeNiMn/Gr high entropy composite processed by
mechanical alloying and spark plasma sintering
G. POPESCU, I. CSAKI, C.A. POPESCU, R. TRUC, E. VASILE, Politehnica University of Bucharest, ROMANIA
12.00: I.O.6. Hot working effects on the damping behavior of shape memory alloys
M. POPA, B. PRICOP, E. MIHALACHE, L.G. BUJOREANU, N.M. LOHAN, Faculty of Materials Science and
Engineering, Gheorghe Asachi Technical University of Iai, ROMANA
12.15: I.O.7. Influence of the element additions to the microstructural and mechanical characteristics of
selected high entropy alloys
D. MITRICA, V. SOARE, M.T. OLARU, National R&D Institute for Nonferrous and Rare Metals IMNR, New
Materials and Technologies Laboratory, Pantelimon, Ilfov, ROMANIA
18
PROGRAM
V. DRAGUT, National R&D Institute for Nonferrous and Rare Metals IMNR, Chemical and Physical Analysis
G. POPESCU, Politehnica University of Bucharest, Faculty of Materials Science and Engineering, Bucharest,
ROMANIA
C. PREDESCU, A. BERBECARU, Politehnica University of Bucharest, Center for Research and Eco-Metallurgical
Expertise, Bucharest, ROMANIA
V. SOARE, National R&D Institute for Nonferrous and Rare Metals IMNR, Chemical and Physical Analysis
M. GHITA, National R&D Institute for Nonferrous and Rare Metals IMNR, Microscopic Characterization
12.30: I.O.8. Optimal choice of multi-pass turning parameters in metal cutting

A. BELLOUFI, Universit Ouargla, Facult Sciences Appliques, Dpartement Gnie Mcanique, Ouargla,
ALGERIA
M. ASSAS, Universit de Batna 2, Facult Technologie, Laboratoire de Recherche en Productique, Batna,
ALGERIA
I. REZGUI, M. ABDELKRIM, M. BOUAKBA, Universit Ouargla, Fac. Sciences Appliques, Dpartement Gnie
Mcanique, Ouargla, ALGERIA
12.45: I.O.9. Experimental Investigations to evaluate the effects of cutting parameters on cutting
temperature and residual stresses during milling process of the AISI 1045
M. ABDELKRIM, Universit Ouargla, Facult Sciences Appliques, Dpartement Gnie Mcanique, Ouargla,
ALGERIA
M. BRIOUA, Universit de Batna 2, Facult Technologie, Dpartement Gnie Mcanique, Batna, ALGERIA
G. BRABIE, C. TAMPU, B. CHIRITA, Vasile Alecsandri University of Bacau, Bacau, ROMANIA
A. BELLOUFI, Universit Ouargla, Facult Sciences Appliques, Dpartement Gnie Mcanique, Ouargla, ALGERIA
13.00: I.O.10. The influence of intercritical quenching in ultrasonic field on the structure of some dual-phase
steels with low content of carbon and manganese
C. DULUCHEANU, T. SEVERIN, "Stefan cel Mare" University of Suceava, Department of Mechanics and
Technologies, Suceava, ROMANIA
13.15: I.O.11. Effect of strain hardening on precipitation kinetics in ATI 718PLUS

B. HASSAN, University of Strathclyde, Advanced Forming Research Centre, Inchinnan, Renfrewshire, UNITED
KINGDOM
S. NOUVEAU, Aubert & Duval, Inchinnan, Renfrewshire, UNITED KINGDOM
Y. JANSEN, Aubert & Duval, Pamiers CEDEX, FRANCE
J. CORNEY, University of Strathclyde, Department of Design, Manufacture and Engineering Management,
Glasgow, UNITED KINGDOM
Hall C
11.30: Keynote Presentations IIa (Section II)
Chairpersons: Mariana CALIN, Leibniz Institute for Solid State and Materials Research Dresden (IFW Dresden),
Institute for Complex Materials, Dresden, GERMANY
Sorin MUNTEANU, Transilvania University of Brasov, ROMANIA
11.30: II.K.1. Evaluation of different magnesium based alloys without aluminium for potential orthopedic
implants
I. ANTONIAC, University Politehnica of Bucharest, ROMANIA
11.50: II.K.2. Synthesis and characterization of some ceramic coatings ON Mg-Ca-Zr metallic substrate for
medical applications
B. ISTRATE, C. MUNTEANU, Gheorghe Asachi Technical University of Iasi, ROMANIA
V. GEANTA, Politehnica University of Bucharest, ROMANIA
D.M. VLAD, G.T. Popa University of Medicine and Pharmacy, Iasi, ROMANIA
19
PROGRAM
Hall C
12.10: Oral Presentations IIb (Section II)
Chairpersons: Iulian ANTONIAC, University Politehnica of Bucharest, Romania
Camelia GABOR, Transilvania University of Brasov, Romania
12.10: II.O.1. Induced wettability and surface-volume correlation of composition for bovine bone derived
hydroxyapatite particles
A. MAIDANIUC, S.I. VOICU, M. MICULESCU, A.C. MOCANU, I. PENCEA, C. ANDRONESCU, E. MATEI, I. CSAKI,
Politehnica University of Bucharest, ROMANIA
T. MACHEDON-PISU, Transilvania University of Brasov, ROMANIA
12.25: II.O.2. Effect of sintering temperature on structure and properties of some new hydroxyapatite based
composites for bone tissue engineering
C. TECU, L. DRAGOMIR, C. MILEA, A. ANTONIAC, I. ANTONIAC, University Politehnica of Bucharest, ROMANIA
M.G. GOK, G. GOLLER, Istanbul Technical University, TURKEY
12.40: II.O.3. Morphology and biocompatibility characterization of nanostructured TiO2 surfaces for
biomedical implants developed by electrochemical anodization
G. STRNAD, S. MOICA, Petru Maior University of Tirgu Mures, ROMANIA
D. PORTAN, University of Patras, GREECE
L. JAKAB-FARKAS, Sapientia University of Cluj Napoca, ROMANIA
C. PETROVAN, O. RUSSU, D. R. MANU, University of Medicine and Pharmacy, Tirgu Mures, ROMANIA
12.55: II.O.4. Corrosion behavior of biodegradable FeMnSi-MgCa alloy

F. SNDULACHE, S. STANCIU, R. CIMPOEU, B. ISTRATE, N. CIMPOEU, Gheorghe Asachi Technical University of
Iasi, ROMANIA
C. TRINC, G. ZEGAN, "Ion Ionescu de la Brad" University of Agricultural Sciences and Veterinary Medicine, ROMANIA
13.10: II.O.5. Resveratrol covalent immobilization onto cellulose acetate membranes for improved
osseointegration
S.I. VOICU, M.A. PANDELE, A. IORDACHE, F. MICULESCU, University Politehnica from Bucharest, ROMANIA
A.I. STARAS, P. NEACSU, A. CIMPEAN, University of Bucharest, ROMANIA
V.K. THAKUR, University of Cranfield, School of Aerospace, Transport and Manufacturing, UNITED KINGDOM
Hall D
11.30: Oral Presentations IIc (Section III)
Chairpersons: Rodica Mariana ION, ICECHIM, Bucharest; Valahia University of Targoviste, ROMANIA
Ctlin CROITORU, Transilvania University of Braov, ROMANIA
11.30: III.O.5. Eco efficient melting of ceramic frits

A. LPEZ-DELGADO, J.I. ROBLA, I. PADILLA, J. GARCA-HIERRO, National Centre for Metallurgical Research,
Madrid, SPAIN
M. ROMERO, Eduardo Torroja Institute for Construction Sciences, Madrid, SPAIN
11.45: III.O.6. Soft magnetic composites based on hybrid coated Fe-Si nanocrystalline powders
B.V. NEAMU, Technical University of Cluj-Napoca, ROMANIA
M. NASUI, Center for Superconductivity, Spintronics and Surface Science, Technical University of Cluj-Napoca,
ROMANIA
T.F. MARINCA, F. POPA, I. CHICINA, Technical University of Cluj-Napoca, ROMANIA
12.00: III.O.7. Characterization of thermoplastic bearings by using of horizontal rotational forming

P.A. POP, University of Oradea, ROMANIA
J. LOPEZ-MARTINEZ, Univesitat Politcnica de Valncia, Alcoy-Alicante, SPAIN
I.M. GORDAN, University of Oradea, ROMANIA
S. FERRANDIZ-BOU, Univesitat Politcnica de Valncia, Alcoy-Alicante, SPAIN
L.G. MITU, Transilvania University of Brasov, ROMANIA
20
PROGRAM
12.15: III.O.8. Influence of aqueous milling duration on the sintering ability of some hard metal powders
H.F. CHICINA, T.F. MARINCA, Technical University of Cluj-Napoca, ROMANIA
P. GTZE, A. ECKERT, G-Elit Przisionwerkzeug, Berlin, GERMANY
C.O. POPA, Technical University of Cluj-Napoca, ROMANIA
12.30: III.O.9. Metal/oxide magnetic composites obtained by reactive spark plasma sintering
T.F. MARINCA, B.V. NEAMU, H.F. CHICINA, F. POPA, I. CHICINA, Technical University of Cluj-Napoca, ROMANIA
12.45: III.O.10. Efficient type of batteries for electric vehicles powering

R. TARULESCU, S. TARULESCU, A. SOICA, Transilvania University of Brasov, ROMANIA
13.00: III.O.11. The theory of generalized thermoelasticity with fractional order strain for dipolar materials
with double porosity
A. CHIRIL, M. MARIN, Transilvania University of Brasov, ROMANIA
13.15: III.O.12. Effect of walnut shell reinforcement on polymer matrix composites

G. AIKBA, S. ZCAN, N. ALI AIKBA, Bilecik Seyh Edebali University, Bilecik, TURKEY
Hall E
11.30: Oral Presentations IId (Section IV)
Chairpersons: Valentin CRACIUN, National Institute for Lasers, Plasma and Radiation Physics, Magurele, ROMANIA
Maria STOICNESCU, Transilvania University of Braov, ROMANIA
11.30: IV.O.5. Coating of liquid wood sheets

O. MOCNIA, M. BENCHEA, B. ISTRATE, C. MUNTEANU, Technical University of Iasi, Mechanical Engineering
Department, Iasi, ROMANIA
D. CHICET, Technical University of Iasi, Materials Science and Engineering Department, Iasi, ROMANIA
11.45: IV.O.6. The reaction to corrosion in steam of a geothermal power plant turbine blade
V. MOOIU, TEHNOID COM SRL, Bucharest, ROMANIA
B. GHIBAN, Materials Science & Engineering Faculty, University Politehnica of Bucharest, ROMANIA
12.00: IV.O.7. Investigation of double-layered rare earth zirconates for thermal barrier coatings (TBCs)
applications under isothermal oxidation conditions
K.M. DOLEKER, A.C. KARAOGLANLI, Bartin University, Department of Metallurgical and Materials Engineering,
Bartin, TURKEY
12.15: IV.O.8. Ultra-stable aqueous suspensions of few-layer graphene encapsulated iron nanoparticles
P. STRACHOWSKI, M. BYSTRZEJEWSKI, University of Warsaw, Faculty of Chemistry, Warsaw, POLAND
I.P. GRUDZISKI, Medical University of Warsaw, Faculty of Pharmacy, Warsaw, POLAND
12.30: IV.O.9. Optical, electrical and structural properties of SiC thin films deposited by reactive DC
magnetron sputtering
T. TAVSANOGLU, Mugla Sitki Kocman University, Faculty of Engineering, Department of Metallurgical and
Materials Engineering, Mugla, TURKEY
E.O. ZAYIM, Istanbul Technical University, Faculty of Science and Letters, Department of Engineering Physics,
Istanbul, TURKEY
O. AGIRSEVEN, O. YUCEL, Istanbul Technical University, Faculty of Chemical and Metallurgical Engineering,
Department of Metallurgical and Materials Engineering, Istanbul, TURKEY
S. YILDIRIM, Istanbul University, Faculty of Science, Department of Physics, Istanbul, TURKEY
12.45: IV.O.10. Isothermal oxidation and thermal cyclic behaviors of YSZ and YSZ/La2Zr2O7 double-layered
thermal barrier coatings (TBCs)
K.M. DOLEKER, Y. OZGURLUK, A.C. KARAOGLANLI, Bartin University, Department of Metallurgical and Materials
Engineering, Bartin, TURKEY
21
PROGRAM
13.00: IV.O.11. Hot corrosion behavior of YSZ and Gd2Zr2O7 thermal barrier coatings (TBCs) exposed to
molten sulfate and vanadate salt
Y. OZGURLUK, K. M. DOLEKER, A.C. KARAOGLANLI, Bartin University, Department of Metallurgical and Materials
Engineering, Bartin, TURKEY
13.15: IV.O.12. Substrate influence on the tribological behaviour of DLC coatings with CrN interlayer
deposited on hardened steel
D. FELDIOREAN, D. CRISTEA, M. TIEREAN, C. GABOR, D. MUNTEANU, Transilvania University of Brasov,
Materials Science and Engineering Faculty, Brasov, ROMANIA
L. JAKAB-FARKAS, Sapientia University, Faculty of Engineering, Tg. Mures, ROMANIA
L. CUNHA, Centro de Fsica, Universidade do Minho, Campus de Gualtar, Braga, PORTUGAL
N.P. BARRADAS, Centro de Cincias e Tecnologias Nucleares, Instituto Superior Tcnico, Universidade de
Lisboa, Bobadela LRS, PORTUGAL
E. ALVES, Instituto de Plasmas e Fuso Nuclear, Instituto Superior Tcnico, Universidade de Lisboa, Bobadela
LRS, PORTUGAL
M. SOCOL, D. CRACIUN, Laser Department, National Institute for Laser, Plasma, and Radiation Physics,
Magurele, ROMANIA
Hall F
11.30: Keynote Presentations IIb (Section V)
Chairpersons: Julia MIRZA ROSCA, Universidad de Las Palmas de Gran Canaria, SPAIN
Tibor BEDO, Transilvania University of Brasov, ROMANIA
11.30: V.K.1. Regular surface nanopatterning with nanosphere lithography, block-copolymer lithography and
combinations of both
K. BRASSAT, C. BRODEHL, J.K.N. LINDNER, Paderborn University, Department of Physics, GERMANY
11.50: V.K.2. The role of hydrogen in materials degradation

D. ELIEZER, Ben-Gurion University of the Negev, Beer-Sheva, ISRAEL
12.10: Oral Presentations IIe (Section V)

Chairpersons: Denis CHAUMONT, Universit de Bourgogne, Dijon, FRANCE
Aurel CRISAN, Transilvania University of Brasov, ROMANIA
12.10: V.O.1. TiO2/Pt-NPs photocatalyst supported on zeolites obtained from fly ash
M. VISA, M. COSNITA, Transilvania University of Brasov, R&D Center Renewable Energy Systems and Recycling,
ROMANIA
12.25: V.O.2. Synthesis and properties of Cu2ZnSnS4 nanoparticles

K.G. DEEPA, C. R. PRAVEEN, Indian Institute of Science Interdisciplinary Centre for Energy Research, INDIA
12.40: V.O.3. Controlling the chain organization and thermochromic behaviors of polydiacetylene assemblies
by varying solvent media
C. KHANANTONG, N. CHAROENTHAI, Department of Chemistry, Faculty of Science, Naresuan University,
THAILAND
S. WACHARASINDHU, M. SUKWATTANASINITT, Organic Synthesis Research Unit, Department of Chemistry,
Faculty of Science, Chulalongkorn University, THAILAND
N. TRAIPHOL, Laboratory of Advanced Chromic Materials, Department of Materials Science, Faculty of Science,
Chulalongkorn University, THAILAND
R. TRAIPHOL, Laboratory of Advanced Polymers and Nanomaterials, School of Materials Science and
Engineering, Faculty of Science, Mahidol University at Salaya, and NANOTEC-MU Excellence Center on
Intelligent Materials and Systems, Faculty of Science, Mahidol University, THAILAND
22
PROGRAM
12.55: V.O.4. Properties analysis of dextrane magnetic carrier compounds with potential applications in
environmental and biomedical fields
A.M. PREDESCU, E. MATEI, A.C. BERBECARU, M.C. PANTILIMON, C.I. DRGAN, C. PREDESCU, C. GRDINARU,
University Politehnica of Bucharest, ROMANIA
13.10: V.O.5. Carbon coated metallurgical grade silicon decorated graphene anodes
G. HATIPOLU, Sakarya University, Engineering Faculty, Dept. of Metallurgy and Materials Engineering and
Tubitak, Marmara Research Center, Energy Institute, TURKEY
M. ALAF, Bilecik Seyh Edebali University, Engineering Faculty, Dept. of Metallurgy and Materials Engineering,
Gulumbe Campus, TURKEY
D. UZUN, Tubitak, Marmara Research Center, Energy Institute, TURKEY
H. AKBULUT, Sakarya University, Engineering Faculty, Dept. of Metallurgy and Materials Engineering, Esentepe
Campus, TURKEY
13.30: Lunch
Hall B
15.00: Oral Presentations IIIa (Section I)
Chairpersons: Horia ALEXANDRU, Politehnica University of Bucharest, ROMANIA
Traian Lucian SEVERIN, "Stefan cel Mare" University of Suceava, ROMANIA
15.00: I.O.12. Effect of pre-straining and baking temperature on bake hardening behaviour of hot-dip
galvanized steels
G. AYTAN, Y. YUREKTURK, Istanbul Technical University, Metallurgical and Materials Department, Istanbul,
TURKEY
M. BAYDOGAN, Istanbul Technical University, Metallurgical and Materials Department, Istanbul, TURKEY
Istanbul Technical University, Prof. Dr. Adnan Tekin Material Sciences and Production Technologies Applied
Research Center, Istanbul, TURKEY
15.15: I.O.13. Estimating volume fractions of microstructural constituents in austempered high silicon alloyed
GJS 600-10 ductile iron through magnetic measurements (VSM)
Y. YUREKTURK, Istanbul Technical University, Metallurgical and Materials Department, Istanbul, TURKEY
M. BAYDOGAN, Istanbul Technical University, Metallurgical and Materials Department, Istanbul, TURKEY
Istanbul Technical University, Prof. Dr. Adnan Tekin Material Sciences and Production Technologies Applied
Research Center, Istanbul, TURKEY
15.30: I.O.14. Oxide nanomaterials: synthesis, mechanistic studies and technological innovation in
wastewater treatment by flotation
C. COVALIU, G. PARASCHIV, University Politehnica of Bucharest, ROMANIA
C. MOGA, S.C. DFR Systems S.R.L., Bucharest, ROMANIA
M. MATACHE, National Institute of Research-Development for Machines and Installations Designed to
Agriculture and Food Industry, Bucharest, ROMANIA
15.45: I.O.15. Formation of Al-Ti based phases for grain refinement of al alloys produced by high energy ball
milling
M. ARIKOLU, A. ZER, Cumhuriyet University Metallurgical and Materials Engineering Department, Sivas, TURKEY
16.00: I.O.16. Identification of the creep models parameters of the metallic materials using evolutionary
algorithms
B. DELIKTAS, H.T. TRKER, Uludag University, Civil Engineering Department, Bursa, TURKEY
M. SNMEZ, Aksaray University., Civil Engineering Department, Bursa, TURKEY
A. DURMUS, Uludag University, Civil Engineering Department, Bursa, TURKEY
16.15: I.O.17. Analytical description of the bainite transformation kinetics in steels 300m and D6AC
A.A. KUKLINA, M.V. MAYSURADZE, Y.V. YDIN, Ural Federal University named after the first President of Russia
B.N. Yeltsin, Ekaterinburg, RUSSIA
23
PROGRAM
16.30: I.O.18. Concepts regarding the heat transfer and reduction of the energy consumptions at the
metallurgical heating furnaces
D. CONSTANTINESCU, B.A. CRLAN, University Politehnica of Bucharest, ROMANIA
Hall D
15.00: Oral Presentations IIIb (Section III)
Chairpersons: Ionel CHICINA, Technical University of Cluj-Napoca, ROMANIA
Liana Sanda BALTES, Transilvania University of Braov, ROMANIA
15.00: III.O.13. Theoretical comparison between carbon fiber and graphene composites for automotive
components
L. RAD, M. ADAM, A. CHIRU, Transilvania University of Brasov, ROMANIA
15.15: III.O.14. Life cycle cost comparison between steel, carbon fiber composites and graphene composites
L. RAD, M. ADAM, A. CHIRU, Transilvania University of Brasov, ROMANIA
15.30: III.O.15. Nanoparticle embedded mixed matrix PSF membranes characterization and membrane
performance
S.C. PINTILIE, L.G. TIRON, A.L. LAZAR, S. BALTA, Dunarea de Jos University of Galati, ROMANIA
15.45: III.O.16. Optimal composition of mixed material for the thermoforming process
A. SONSIRI, P. PALICAMIN, Rajamangala University of Technology Krungthep, Bangkok, THAILAND
16.00: III.O.17. Effect of sequential milling (mechanical alloying-cryogenic milling) on the microstructural and
mechanical properties of TiB2 reinforced Al-12.6 wt.% Si MMCs
E. TEKOLU, S. MERTDIN, D. AAOULLARI, M. L. VEOLU, Istanbul Technical University, TURKEY
16.15: III.O.18. Analysis of flexural properties for metal/plastic composites made by a new hybrid process
J. BUTT, H. SHIRVANI, S. NAMMI, Anglia Ruskin University, Department of Engineering & Built Environment,
Chelmsford, Essex, UNITED KINGDOM
Hall E
15.00: Oral Presentations IIIc (Section IV)
Chairpersons: Corneliu MUNTEANU, Technical University of Iasi, ROMANIA
Elena Manuela STANCIU, Transilvania University of Brasov, ROMANIA
15.00: IV.O.13. Effect of process parameters on the tribological properties of porcelain waste reinforced
epoxy composites
N. ALI AIKBA, Bilecik Seyh Edebali University, Engineering Faculty, Dept. of Metallurgy and Materials
Engineering, Bilecik, TURKEY
B. YAMAN, Eskisehir Osmangazi University, Engineering Faculty, Dept. of Metallurgy and Materials Engineering,
Eskisehir, TURKEY
G. AIKBA, Bilecik Seyh Edebali University, Vocational School, Metallurgy Program, Bilecik, TURKEY
15.15: IV.O.14. Induced superhydrophobic and antimicrobial character of zinc metal modified ceramic wall
tile surfaces
S. ZCAN, Bilecik Seyh Edebali University, Engineering Faculty, Dept. of Chemical and Process Engineering,
Bilecik, TURKEY
G. AIKBA, Bilecik Seyh Edebali University, Vocational School, Metallurgy Program, Bilecik, TURKEY
N. ALI AIKBA, Bilecik Seyh Edebali University, Engineering Faculty, Dept. of Metallurgy and Materials
Engineering, Bilecik, TURKEY
24
PROGRAM
Hall F
15.00: Oral Presentations IIId (Section V)
Chairpersons: Rakchart TRAIPHOL, Mahidol University at Salaya, THAILAND
Mihai Alin POP, Transilvania University of Brasov, ROMANIA
15.00: V.O.6. Influence of carbon nanotubes used in carburizing heat treatment of SAE 3310 steel
S.A. BARABAS, A. FLORESCU, T. MACHEDON-PISU, F. SARBU, Transilvania University of Brasov, ROMANIA
15.15: V.O.7. Deposition of TiO2 nanostructures by MOCVD with metallocene catalysts

A. CRISBASAN, D. CHAUMONT, Y. LACROUTE, R. CHASSAGNON, Nanoform, ICB, Universite de Bourgogne
Franche-Comte, FRANCE
M. SACILOTTI, Departamento de Fisica, Universidade Federal de Pernambuco Recife, BRAZIL
15.30: V.O.8. Characterization of VC reinforced Cu, Fe and Ni composite powders produced via mechanical
alloying
B. ZKAL, A. SELTE, Istanbul Technical University, TURKEY
15.45: V.O.9. Morphological analysis of magnetic nanomaterials through comparative methods

M.C. PANTILIMON, C.I. DRAGAN, C. GRADINARU, A.M. PREDESCU, M. SOHACIU, G. COMAN, C. PREDESCU,
Politehnica University of Bucharest, ROMANIA
16.00: V.O.10. In situ synthesis of SnO2/graphene nanocomposite anode and its enhanced Li-ion battery
performance
M. ALAF, Bilecik Seyh Edebali University, TURKEY
E. ALKAN, M.O. GULER, H. AKBULUT, Sakarya University, Engineering Faculty, Dept. of Metallurgy and Materials
Engineering, Esentepe Campus, TURKEY
16.15: V.O.11. Exfoliation of graphite in carbon arc discharge

M. FRONCZAK, M. BYSTRZEJEWSKI, Faculty of Chemistry, University of Warsaw, POLAND
16.30: V.O.12. Wastewater treatment using zeolites nanomaterials

C. COVALIU, G. PARASCHIV, University Politehnica of Bucharest, ROMANIA
Hall C
15.00: Oral Presentations IIIe (Sections VI & VII)
Chairpersons: Radu IOVNA, Transilvania University of Brasov, ROMANIA
Drago BUZDUGAN, Politehnica University of Timioara, ROMANIA
15.00: VI.O.1. Characterization of fusion lines obtained by laser welding on preheated ductile iron plates
I.C. MON, M.H. TIEREAN, Transilvania University of Braov, ROMANIA
E. CICALA, M. PILLOZ, I. TOMASHCHUK, P. SALLAMAND, Universit de Bourgogne Franche Comt, FRANCE
15.15: VI.O.2. Continuous wave laser welding of copper

A. PASCU, I.C. ROAT, E. M. STANCIU, M.H. TIEREAN, Transilvania University of Braov, ROMANIA
15.30: VI.O.3. Increasing the quality of welded joints of Al-Si 6082 alloys by introducing forced vibrations
M.A. BODEANU, T. MACHEDON-PISU, Transilvania University of Braov, ROMANIA
15.45: VI.O.4. Influence of the laser cladding parameters on the morphology, wear and corrosion resistance
of composite coatings
I. HULKA, D. UU, V.A. ERBAN, Politehnica University of Timioara, ROMANIA
A. PASCU, I. ROAT, Transilvania University of Braov, ROMANIA
16.00: VI.O.5. Mechanical properties improvement of Cu10Al laser cladded on aluminum

I.C. ROAT, E. M. STANCIU, Transilvania University of Braov, ROMANIA
C. CROITORU, A. PASCU, Transilvania University of Braov, ROMANIA
25
PROGRAM
I. HULKA, Politehnica University of Timioara, ROMANIA
16.15: VII.O.1. Ecosocial (environmental and social) safety in metallic material industry
A. NICOLAE, G. COMAN, B.F. STROE, A.N. ILIE, M. NICOLAE, Politehnica University of Bucharest, ROMANIA
16.45: Coffee break
Hall G
17.00: Poster presentations II
Section II
II.PO.1. Charcoal obtained from the waste vegetable products, used like support for plant extracts
A. COZEA, S.C. HOFIGAL IMPORT EXPORT SA, Transilvania Universitaty from Brasov, ROMANIA
M. PASCU (NEAGU), S.C. HOFIGAL IMPORT EXPORT SA, Politehnica University of Bucharest, ROMANIA
D.E. PASCU, Politehnica University of Bucharest, ROMANIA
R. GRUIA, Transilvania Universitaty from Brasov, ROMANIA
II.PO.2. Obtaining and mechanical properties of Ti-Mo-Zr-Ta alloys

M.S. BLATU, M. BENCHEA, Gheorghe Asachi Technical University of Iasi, ROMANIA
P. VIZUREANU, Gheorghe Asachi Technical University of Iasi, ROMANIA
Centre of Excellence Geopolymer & Green Technology School of Materials Engineering, University Malaysia
Perlis, MALAYSIA
V. GEANT, University Politehnica of Bucharest, ROMANIA
A.V. SANDU, Gheorghe Asachi Technical University of Iasi, ROMANIA
Perlis, MALAYSIA, Romanian Inventors Forum, ROMANIA
II.PO.3. Zirconia dental implant materials

S.C. FOCNEANU, M.S. BLATU, Gheorghe Asachi Technical University of Iasi, ROMANIA
P. VIZUREANU, Gheorghe Asachi Technical University of Iasi, Romania; Centre of Excellence Geopolymer &
Green Technology School of Materials Engineering, University Malaysia Perlis, MALAYSIA
A.V. SANDU, Gheorghe Asachi Technical University of Iasi, ROMANIA
Perlis, MALAYSIA, Romanian Inventors Forum, ROMANIA
II.PO.4. Biosynthesis of metallic nanoparticles using microorganisms

I.GHIU, D. CRISTEA, D. MUNTEANU, Transilvania University of Brasov, ROMANIA
II.PO.5. Effect of SiC partcle sze on the physcal and mechancal propertes OF NiTi alloys
K.E. KSZ, H. AKKAN, M. IMIR, Cumhuriyet University, TURKEY
II.PO.6. XRD analysis and FTIR study on calcined bones

K.E. KSZ, E.N. YILMAZ, Y. DURMU, A. ZER, Cumhuriyet University, TURKEY
II.PO.7. Chitosan/casein multilayer films as a novel drug delivery system

M. MARUDOVA, A. VIRANEVA, G. EXNER, I. BODUROV, T. YOVCHEVA, Plovdiv University Paisii Hilendarski,
BULGARIA
B. PILICHEVA, S. SOTIROV, Y. UZUNOVA, Medical University Plovdiv, BULGARIA
I. VLAEVA, University of Food Technologies, BULGARIA
II.PO.8. Alloys with superior mechanical properties used in manufacturing of implants

M. G. MINCIUN, P. VIZUREANU, D.C. ACHIEI, Gheorghe Asachi Technical University of Iasi, ROMANIA
Perlis, MALAYSIA
B. ISTRATE, Gheorghe Asachi Technical University of Iasi, ROMANIA
26
PROGRAM
II.PO.9. Influence of the modulated two-step synthesis of biogenic hydroxyapatite on biomimetic products
surface
F. MICULESCU, M. MICULESCU, S.I. VOICU, University Politehnica of Bucharest, ROMANIA
A.C. MOCANU, A. MAIDANIUC, S.C. Nuclear NDT Research&Services S.R.L, Romania, University Politehnica of
Bucharest, ROMANIA
G. STAN, National Institute of Materials Physics, ROMANIA
A. CMPEAN, V. MITRAN, University of Bucharest, ROMANIA
T. MACHEDON-PISU, Transilvania University of Brasov, ROMANIA
II.PO.10. Overview of most popular Romanian medicinal and aromatic plants as potential sources of biomaterials
S. SPNU, University of Agronomic Sciences and Veterinary Medicine of Bucharest; University of Bucharest, ROMANIA
M. DRUGULESCU, University of Agronomic Sciences and Veterinary Medicine of Bucharest, ROMANIA
D. IONESCU, University of Agronomic Sciences and Veterinary Medicine of Bucharest, Hofigal Export Import S.A,
ROMANIA
II.PO.11. Structural and compositional analysis of phosphocalcic bioactive glasses

D. AVRAM, D.N. UNGUREANU, N. ANGELESCU, I. IONI, Valahia University of Targoviste, ROMANIA
II.PO.12. Surface modifications of titanium-based implants: the effect of surface characteristics on

biocompatibility and osseointegration
Y.Y. KHRUNYK, S.V. BELIKOV, O.Y. KORNIENKO, A.V. KORELIN, Ural Federal University, RUSSIA
I.V. VYALYKH, Ural Scientific Research Veterinary Institute, RUSSIA
II.PO.13. The study of materials used to manufacture prosthetic components for medical implants
V. DESPA, F.V. ANGHELINA, V. BRATU, Valahia University of Targoviste, ROMANIA
C.O. RUSNESCU, Politehnica University of Bucharest, ROMANIA
II.PO.14. Biomaterials perspective on the complications related to the use of surgical meshes in
urogynecological surgery
A. ANTONIAC, C. MILEA, L. DRAGOMIR, A. TAPOSU, I. ANTONIAC, University Politehnica of Bucharest, ROMANIA
E. BRATILA, Carol Davila University of Medicine and Pharmacy, Bucharest, ROMANIA
C. BERCEANU, University of Medicine and Pharmacy of Craiova, ROMANIA
II.PO.15. In vitro comparative assessment of the chemistry, handling and mechanical properties of cements
for vertebroplasty
D. VOINESCU, Clinical University Emergency Hospital Elias Bucharest, ROMANIA
A. TAPOSU, C. MILEA, A. ANTONIAC, I. ANTONIAC, D. POP, University Politehnica of Bucharest, ROMANIA
A. MOHAN, University of Oradea, ROMANIA
II.PO.16. Failure analysis of a titanium clavicle plate

F. VARLAN, I. ANTONIAC, R. BOLOLOI, G. DAN, B. GHIBAN, University Politehnica of Bucharest, ROMANIA
R. MARINESCU, D. LAPTOIU, Colentina Clinical Hospital, Orthopedic Department, Bucharest, ROMANIA
II.PO.17. Additively manufactured femoral stem topology optimization: case study

D. MUNTEANU, S. MUNTEANU, Transilvania University of Brasov, Material Science Department, Brasov,
ROMANIA
B. GHEORGHIU, SC MIND FOUR D SRL, Brasov, ROMANIA
T. BEDO, M.A. POP, C. GABOR, D. CRISTEA, Transilvania University of Brasov, Material Science Department,
Brasov, ROMANIA
II.PO.18. Comparative study of mechanical properties for the main brands of dental implants
M. STOICANESCU, E. BUZAMET, V. BUDEI, V. CRACIUN, R. BUDEI, Dentix Millennium SRL, Sabareni, jud. Giurgiu,
ROMANIA
II.PO.19. Research of possible causes breaking of dental implants

M. STOICANESCU, E. BUZAMET, V. BUDEI, V. CRACIUN, R. BUDEI, Dentix Millennium SRL, Sabareni, jud. Giurgiu,
ROMANIA
27
PROGRAM
Section IV
IV.PO.1. Sintering under concentrated solar radiation of perovskite ceramics for electronic applications
I. APOSTOL, S.C. IPEE Amiral Trading Impex S.A., Curtea de Arges, ROMANIA
K. VENKATA SARAVANAN, Central University of Tamil Nadu, School of Basic and Applied Sciences, Physics Dept,
Thiruvarur, INDIA
J. RODRGUEZ, I. CAADAS, J. GALINDO, CIEMAT- Plataforma Solar de Almeria, Tabernas, Almeria, SPAIN
IV.PO.2. Nanocomposites thin layers for dental implants functionalization, obtained by advanced laser
deposition techniques
L. FLOROIAN, M. BADEA, D. CALAVER, Transilvania University of Brasov, ROMANIA
C. RISTOSCU, N. MIHAILESCU, I. NEGUT, I.N. MIHAILESCU, National Institute for Lasers, Plasma and Radiation
Physics, Mgurele, ROMANIA
M. MOSCATELLI, N. PASTORI, G. CANDIANI, R. CHIESA, Politecnico di Milano, ITALY
IV.PO.3. Adhesion characterisation of complex ceramics thin layers deposited on metallic substrate
C. FLOREA, C. BEJINARIU, C. SAVIN, R. CIMPOESU, Technical University Gheorghe Asachi from Iai, Faculty of
Material Science and Engineering, Iai, ROMANIA
B. ISTRATE, M. BENCHEA, Technical University Gheorghe Asachi from Iai, Faculty of Mechanical Engineering,
Iai, ROMANIA
IV.PO.4. Comparative study of the adhesion of Ti-Me (Me = Al, Cu, Ag, Au) thin films on polymeric substrates,
aiming biomedical applications
B. FREITAS, C. LOPES, A. FERREIRA, M.S. RODRIGUES, F. VAZ, Universidade do Minho, Centro de Fi sica, Campus
de Gualtar, Braga, PORTUGAL
IV.PO.5. Antifungal properties of magnetron sputtered zinc oxide thin films

D. COSTA, J. BORGES, M.F. MOTA, P. SAMPAIO, F. VAZ, Universidade do Minho, Centro de Fi sica, Campus de
Gualtar, Braga, PORTUGAL
D. COSTA, Centro de Biologia Molecular e Ambiental, Universidade do Minho, Campus de Gualtar, Braga, PORTUGAL
IV.PO.6. Thin films composed of metallic nanoparticles (Au, Ag) dispersed in AlN matrix: influence of metal
concentration and thermal annealing on the plasmonic absorption band
R.P. DOMINGUES, M.S. RODRIGUES, D. COSTA, J. BORGES, F. VAZ, Centro de Fsica, Universidade do Minho,
Campus de Gualtar, Braga, PORTUGAL
F.J. OLIVEIRA, R.F. SILVA, CICECO - Aveiro Institute of Materials, Department of Materials and Ceramic
Engineering, UA, Aveiro, PORTUGAL
P. PEDROSA, N. MARTIN, Institut FEMTO-ST, UMR 6174 CNRS, Universit Bourgogne Franche-Comt, Besanon,
FRANCE
E. ALVES, Instituto de Plasmas e Fuso Nuclear, IST, Universidade de Lisboa, Lisboa, PORTUGAL
N.P. BARRADAS, Centro de Cincias e Tecnologias Nucleares, IST, Universidade de Lisboa, Bobadela LRS, PORTUGAL
IV.PO.7. The effect of iron on the corrosion of AlTiNiCu and AlTiNiCuFe equi-molar composition high entropy alloys
. FAZAKAS, . VIDA, Bay Zoltn Nonprofit Ltd. for Applied Research, Engineering Division, Budapest, Hungary
. VIDA, Department of Materials Physics, Etvs University Budapest, HUNGARY
Institute for Solid State Physics and Optics, Wigner Research Centre for Physics, Budapest, HUNGARY
J. MIKLS-KOVCS, Institute for Solid State Physics and Optics, Wigner Research Centre for Physics, Budapest,
HUNGARY
IV.PO.8. Increasing wear resistance of power steering pump cam using Ni-Cr-Fe and Ni-Cr-B-Si-Fe coatings
C. STESCU, C. MUNTEANU, B. ISTRATE, M. BENCHEA, Gheorghe Asachi University of Iasi, Mechanical
Engineering Department, Iasi, ROMANIA
D. LUCA, D. CHICET, Gheorghe Asachi University of Iasi, Materials Science and Engineering Department, Iasi,
ROMANIA
28
PROGRAM
IV.PO.9. Microstructural aspects of TBC`s deposited on internal combustion engine valve materials
M. PANURU, C. PAULIN, . LUPESCU, C. MUNTEANU, Technical University of Iasi, Mechanical Engineering
Department, Iasi, ROMANIA
D. CHICET, Technical University of Iasi, Materials Science and Engineering Department, Iasi, ROMANIA
IV.PO.10. Studies regarding the wear behavior of the braking mechanism

I. PETRE; A. POINESCU; A. CATANGIU, S. MIHAI, Valahia University of Targoviste, Faculty of Materials
Engineering and Mechanics, Targoviste, ROMANIA
IV.PO.11. Surface characterization of MFe2O4 powder obtained by using olive oil as a surfactant agent
T. ROMAN, S. STANCIU, Gheorghe Asachi Technical University of Iasi, Faculty of Materials Science and
Engineering, Iasi, ROMANIA
A. PUI, Department of Chemistry, Alexandru Ioan Cuza University of Iasi, Iasi, ROMANIA
IV.PO.12. Importance of post-processing for CVD graphene

B. NCU, A. AVRAM, V. UCUREANU, A. MATEI, C. MRCULESCU, T. BURINARU, B. BITA, F. COMNESCU,
M. AVRAM, National Institute for Research and Development in Microtehnologies IMT-Bucharest, ROMANIA
V. UCUREANU, Transilvania University of Brasov, Department of Materials Science, ROMANIA
IV.PO.13. New metallo-porphyrins: characterization and applications in solar energy conversion

L. OLTEANU, S. TEODORESCU, R.M. TIRBESCU, I.D. DULAM, A.I. BUCURIC, Valahia University of Targoviste,
Institute of Multidisciplinary Research for Science and Technology, Targoviste, ROMANIA
R.M. ION, Valahia University of Targoviste, Materials Engineering and Mechanics Department, Targoviste, ROMANIA
National Institute for Research and Development in Chemistry and Petrochemistry - ICECHIM, Nanomedicine
Research Group, Bucharest, ROMANIA
IV.PO.14. Nanostructured aniticorrosive hybrid materials obtained by PLD

M. BIRDEANU, A.V. BIRDEANU, M. VAIDA, National Institute for Research and Development in Electrochemistry
and Condensed Matter, Timisoara, ROMANIA
A.V. BIRDEANU, National R&D Institute for Welding and Material Testing ISIM Timioara, ROMANIA
D.S. MILOVANOVIC, University of Belgrade, Vinca Institute of Nuclear Sciences, Belgrade, SERBIA
A. LASCU, A. PALADE, I. FRINGU, E. FAGADAR-COSMA, Institute of Chemistry Timisoara of the Romanian
Academy, Timisoara, ROMANIA
IV.PO.15. Surface properties of laser treated arc-deposited claddings

A. OLAH, C. CROITORU, M. TIEREAN, Transilvania University of Brasov, Materials Engineering and Welding
IV.PO.16. Preliminary results on effect of H2S on P265GH commercial material for gas and petroleum
transportation
M. ZAHARIA, S. STANCIU, R. CIMPOEU, C. NEJNERU, I. IONI, C. SAVIN, N. CIMPOEU, Technical University
Gheorghe Asachi of Iai, Faculty of Material Science and Engineering, Iai, ROMANIA
IV.PO.17. Combined fast laser texturing and HV of TiO2 powder deposition surface engineering treatment for
corrosion protection
A.V. BIRDEANU, I. A. PERIANU, National R&D Institute for Welding and Material Testing ISIM Timioara, ROMANIA
D.S. MILOVANOVIC, University of Belgrade, Vinca Institute of Nuclear Sciences, Belgrade, SERBIA
S. PETRONIC, Innovation Center, Faculty of Mechanical Engineering University of Belgrade, SERBIA
M. BIRDEANU, National Institute for Research and Development in Electrochemistry and Condensed Matter,
Timisoara, ROMANIA
IV.PO.18. In-situ XRD vs ex-situ heat treatment of tantalum oxynitride thin films: Similarities and differences
on the structural evolution
D. CRISTEA, T. BEDO, Materials Science Department, Transilvania University, Brasov, ROMANIA
M. APREUTESEI, P. STEYER, MATEIS Laboratory-INSA de Lyon, Villeurbanne, FRANCE
C. MOURA, L. CUNHA, Centro de Fsica, Universidade do Minho, Campus de Gualtar, Braga, PORTUGAL
F. VAZ, Centro de Fsica, Universidade do Minho, Campus de Azurm, Guimares, PORTUGAL
29
PROGRAM
IV.PO.19. Surface improvement of cold sprayed copper-alumina coating via friction stir processing
C. LANGLADE, A. ROMAN, E. AUBIGNAT, Universit Bourgogne Franche Comt, France Laboratoire
Interdisciplinaire Carnot de Bourgogne, Belfort, FRANCE
D. SCHLEGEL, ESTA, Belfort, FRANCE
M. FOLEA, Transilvania University of Brasov, Manufacturing Engineering Department, Brasov, ROMANIA
IV.PO.20. Structure and properties of biodegradable calcium phosphate coatings deposited by magnetron
sputtering on biodegradable magnesium alloys
E. PLOPEANU, I. ANTONIAC, A. ANTONIAC, A. TAPOSU, R. BOLOLOI, University Politehnica of Bucharest, Faculty
of Material Science and Engineering, Bucharest, ROMANIA
A. VLADESCU, National Institute for OptoelectronicsINOE 2000, Magurele, ROMANIA
A. MOHAN, University of Oradea, Faculty of Medicine, Oradea, ROMANIA
IV.PO.21. Functional coatings with protective properties deposited by cold spray technology
A.O. MATEESCU, G. MATEESCU, Horia Hulubei National Institute of Physics and Nuclear Engineering,
Magurele, ROMANIA
A. BLAN, C. CEAUS, I. STAMATIN, University of Bucharest, Faculty of Physics, 3 Nano-SAE Research Centre,
Magurele, ROMANIA
C. SAMOIL, D. CRISTEA, V. JINGA, D. MUNTEANU, Transilvania University of Brasov, Materials Science
D. URSUIU, Transilvania University of Brasov, Electronics and Computer Department, Brasov, ROMANIA
IV.PO.22. Improvement of the mechanical and tribological properties of the metallic materials by the surface
nitriding in open atmosphere cold plasma surface treatment
A.O. MATEESCU, G. MATEESCU, Horia Hulubei National Institute of Physics and Nuclear Engineering,
Magurele, ROMANIA
A. BLAN, C. CEAUS, I. STAMATIN, University of Bucharest, Faculty of Physics, 3 Nano-SAE Research Centre,
Magurele, ROMANIA
C. SAMOIL, D. CRISTEA, V. JINGA, D. MUNTEANU, Transilvania University of Brasov, Materials Science
D. URSUIU, Transilvania University of Brasov, Electronics and Computer Department, Brasov, ROMANIA
Section V
V.PO.1. Composite materials for ibuprofen removal from water by catalytic ozonation
S.M. AVRAMESCU, A. OLARU, C. BRADU, A. NICA, University of Bucharest-PROTMED Research center, ROMANIA
R.C. FIERASCU, I. FIERASCU, C.A. NICOLAE, B. TRICA, The National Institute for Research & Development in
Chemistry and Petrochemistry-ICECHIM, ROMANIA
V.PO.2. Activated carbon AC35 nanomaterial temperatures limits for solar adsorption cooling system using
methanol as refrigerant
N. CHERRAD, Ouargla, Fac. des Sciences Appliques, Dpt. Gnie Mcanique and Laboratoire de Gnie
Energtique et Matriaux (LGEM), Universit de Biskra, ALGERIA
A. BENCHABANE, Laboratoire de Gnie Energtique et Matriaux (LGEM), Universit de Biskra, ALGERIA
M. ABDELKRIM, A. BELLOUFI, Ouargla, Fac. des Sciences Appliques, Dpt. Gnie Mcanique, ALGERIA
V.PO.3. Conduction component of dielectric losses in ferroelectric phase of TGS

M. DAN, L. DAN, University of Bucharest, Faculty of Physics, Bucharest, ROMANIA
C.P. GANEA, National Institute of Materials Physics, Bucharest, ROMANIA
H.V. ALEXANDRU, University of Bucharest, Faculty of Physics, Bucharest, ROMANIA
Academy of Romanian Scientists, ROMANIA
V.PO.4. Magnetic material with nanosize dimensions: synthesis, characterization and testing
C.I. DRAGAN, E. MATEI, G. COMAN, A. M. PREDESCU, M. SOHACIU, A.C. BERBECARU, M.C. PANTELIMON,
University Politehnica of Bucharest, ROMANIA
30
PROGRAM
V.PO.5. A novel route for the preparation of CoCr2O4/SiO2 nanocomposite starting from Co(II) - Cr(III)
carboxylate complex combinations
E. BEREI, C. MUNTEAN, O. TEFNESCU, M. TEFNESCU, Politehnica University of Timioara, ROMANIA
T. VLASE, West University of Timioara, Chemistry Department, ROMANIA
V.PO.6. Removal of phenolic derivatives from water by crosslinked -cyclodextrin

I. FIERASCU, R.C. FIERASCU, The National Institute for Research & Development in Chemistry and
Petrochemistry-ICECHIM, ROMANIA
S.M. AVRAMESCU, A. OLARU, C. BRADU, A. NICA, C.A. NICOLAE, B. TRICA, University of Bucharest-PROTMED
Research Center, ROMANIA
V.PO.7. Tuned apatitic materials: synthesis, characterization and potential applications

R.C. FIERASCU, I. FIERASCU, R. SOMOGHI, R.M. ION, The National Institute for Research & Development in
Chemistry and Petrochemistry-ICECHIM, ROMANIA
A. MOANTA, CEPROCIM SA, Bucharest, ROMANIA
L.M. DITU, University of Bucharest, Microbiology Department, ROMANIA
V.PO.8. Photovoltaic performance enhancement of hydrothermally grown ZnO nanorods for dye sensitized
solar cells: the effects of seed layer
D. GLTEKN, H. AKBULUT, Sakarya University, Metallurgy and Materials Engineering Department, Esentepe
Campus, TURKEY
V.PO.9. Graphene supported a-MnO2 cathodes FOR Li-O2 batteries

M. ALAF, Bilecik Seyh Edebali University, Engineering Faculty, Dept. of Metallurgy and Materials Engineering,
Gulumbe Campus, TURKEY
F. KAYIS, U. TOCOGLU, H. AKBULUT, Sakarya University, Engineering Faculty, Dept. of Metallurgy and Materials
Engineering, Esentepe Campus, TURKEY
V.PO.10. Influence of surfactants on the chemical synthesis of Cu-doped ZnO nanoparticles

A. MATEI, B. TINCU, C. ROMANITA, L. CERNICA, National Institute for Research and Development in
Microtehnologies IMT-Bucharest, ROMANIA
V. TUCUREANU, National Institute for Research and Development in Microtehnologies IMT-Bucharest and
Transilvania University of Brasov, Department of Materials Science, ROMANIA
B. BITA, National Institute for Research and Development in Microtehnologies IMT-Bucharest and Faculty of
Physics, University of Bucharest, ROMANIA
L. DUMITRESCU, Transilvania University of Brasov, Product Design and Environment Faculty, ROMANIA
V.PO.11. Photovoltaic performance of ultrasmall Fe doping CuCrO2 nanoparticles for P-type dye sensitized
solar cells application
M. MICLAU, D. URSU, National Institute for Research and Development in Electrochemistry and Condensed
Matter, ROMANIA
V.PO.12. Low-temperature hydrothermal synthesis of the copper metaborate CuB2O4

M. MICLAU, A. DABICI, B. TARANU, D. URSU, National Institute for Research and Development in
Electrochemistry and Condensed Matter, ROMANIA
V.PO.13. Modulation of TVA deposition parameters for the Fe-Ni-Cu-Ta thin films interdiffusivity and GMR
effect influence
F. MICULESCU, B. VASILE, C.M. COTRUT, A. PURCARU, M. MICULESCU, University Politehnica of Bucharest,
ROMANIA
G.E. STAN, V. KUNCSER, National Institute of Materials Physics, Mgurele-Bucharest, ROMANIA
I. JEPU, C.P. LUNGU, National Institute for Laser, Plasma and Radiation Physics, Bucharest-Mgurele, ROMANIA
T. MACHEDON-PISU, Transilvania University of Brasov, Materials Science and Engineering Faculty, ROMANIA
V.PO.14. Phyto-mediated metallic nano-architectures via Melissa Officinalis l.: Synthesis, characterization,
cytotoxicity and antimicrobial properties
A. ORTAN, University of Agronomic Sciences and Veterinary Medicine, ROMANIA
31
PROGRAM
R.C. FIERASCU, I. FIERASCU, University of Agronomic Sciences and Veterinary Medicine and The National
Institute for Research & Development in Chemistry and Petrochemistry-ICECHIM, ROMANIA
S.M. AVRAMESCU, University of Agronomic Sciences and Veterinary Medicine and University of Bucharest-
PROTMED Research center, ROMANIA
D. IONESCU, University of Agronomic Sciences and Veterinary Medicine and S.C. HOFIGAL EXPORT IMPORT S.A.,
Bucharest, ROMANIA
A. SUTAN, University of Pitesti, Faculty of Science, ROMANIA
L.M. DITU, University of Bucharest, Microbiology Department, ROMANIA
V.PO.15. Synthesis and characterization of CeO2 doped ZrO2 ceramics by a simple sol-gel route
U.H. ZER, K.E. KSZ, A. ZER, Cumhuriyet University, Department of Metallurgical & Materials Engineering,
TURKEY
V.PO.16. Solar radiation synthesis of functional carbonaceous materials using Al2O3/TiO2-Cu doped catalyst
A. PASCU, E.M. STANCIU, I.C. ROATA, C. CROITORU, M.H. TIEREAN, Transilvania University of Braov, Materials
Science and Engineering Faculty, ROMANIA
I. HULKA, Politehnica University of Timioara, ROMANIA
V.PO.17. Synthesis and characterisation of crednerite CuMn1-XBXO2 (B=Mg, Al; x=0 - 0.08) type materials
M. POIENAR, P. SFIRLOAGA, P. VLAZAN, Institute for Research and Development in Electrochemistry and
V.PO.18. Development of broadband ultrasonic spectroscopy for colloidal suspensions characterization

M. SOARE, A.C. MOCANU, C. IORDACHE, S.C. Nuclear NDT Research&Services S.R.L, Department of Research,
Development and Innovation, Bucharest, ROMANIA
M.V. PREDOI, University Politehnica of Bucharest, Department of Mechanics, Research Center in Mechanics of
D. PREDOI, C.S. CIOBANU, National Institute of Materials Physics, Laboratory of Multifunctional Materials and
Structures, Mgurele-Bucharest, ROMANIA
V.PO.19. Nanoaggregates obtained from eco-friendly silver nanoparticles and phthalocyanine derivatives
A.A. SORESCU, R.M. ION, Valahia University of Targoviste, Material Science Department, Targoviste and The
National Research&Development Institute for Chemistry and Petrochemistry - ICECHIM, Bucharest, ROMANIA
A. NU, The National Research&Development Institute for Chemistry and Petrochemistry - ICECHIM,
Bucharest and The Romanian Academy Stefan S. Nicolau Institute of Virology, Bucharest, ROMANIA
I.R. UIC-BUNGHEZ, C.L. NISTOR, R.C. FIERSCU, The National Research&Development Institute for Chemistry
and Petrochemistry - ICECHIM, Bucharest, ROMANIA
V.PO.20. The use of gooseberry and chokeberry fruits for the synthesis of metallic (Au, Ag, Pt) nanoparticles
I.R. SUICA-BUNGHEZ, National R&D Institute for Chemistry and Petrochemistry ICECHIM, Bucharest, ROMANIA
N. NWAHARA, Rhodes University, Department of Chemistry, Grahamstown, SOUTH AFRICA
S. TEODORESCU, N. STIRBESCU, R.M. STIRBESCU, Multidisciplinary Science and Technology Research Institute of
Valahia University of Targoviste - ICSTM-UVT, Targoviste, ROMANIA
R.M. ION, National R&D Institute for Chemistry and Petrochemistry ICECHIM, Bucharest and Valahia
University of Targoviste, ROMANIA
V.PO.21. Removal of heavy metals from single-and binary-metal aqueous solutions using hydroxyapatite
nano-adsorbents
C. TARDEI, D. TALPEANU, F. CLICINSCHI, National Institute for R&D in Electrical Engineering ICPE-CA, Bucharest,
ROMANIA
C.M. SIMONESCU, C. ONOSE, University POLITEHNICA Bucharest, Faculty of Applied Chemistry and Materials
Science, Bucharest, ROMANIA
V.PO.22. Si@void@carbon yolk-shell anodes for lithium ion batteries

U. TOOLU, F. KAYI, H. AKBULUT, Sakarya University, Metallurgical and Materials Department, TURKEY
M. ALAF, Bilecik eyh Edebali University, Metallurgical and Materials Department, TURKEY
32
PROGRAM
V.PO.23. Controlling self-assembling and thermochromism of polydiacetylene/zinc oxide nanocomposite by

varying PH
N. TRAIPHOL, S. SEETHA, Laboratory of Advanced Chromic Materials, Department of Materials Science, Faculty
of Science, Chulalongkorn University, THAILAND
V.PO.24. Properties of the yellow emitting phosphors for white LED manufacturing
V. TUCUREANU, National Institute for Research and Development in Microtehnologies IMT-Bucharest and
Transilvania University of Brasov, Department of Materials Science, ROMANIA
A. MATEI, A. AVRAM, M.C. POPESCU, I. MIHALACHE, M. DANILA, M. AVRAM, C.V. MARCULESCU, B.C. TINCU,
T. BURINARU, National Institute for Research and Development in Microtehnologies IMT-Bucharest, ROMANIA
M. VOLMER, Transilvania University of Brasov, Electrical Engineering and Applied Physics Department, ROMANIA
D. MUNTEANU, Transilvania University of Brasov, Department of Materials Science, Materials Science and
Engineering Faculty, ROMANIA
V.PO.25. Influence of CdS loading upon type PdS/CdS-ZnS photocatalysts

D. URSU, R. BANICA, C. MOSOARCA, M. MICLAU, P. SVERA, National Institute for Research and Development in
Electrochemistry and Condensed Matter, Timisoara, ROMANIA
V.PO.26. Low-cost synthesis of PdS /Zn1-xCdxS using battery industry waste

D. URSU, P. SVERA, C. MOSOARCA, M. MICLAU, R. BANICA, National Institute for Research and Development in
Electrochemistry and Condensed Matter, Timisoara, ROMANIA
V.PO.27. Biosynthesis of zinc oxide nanoparticles using enterobacter

I.GHIU (POPESCU), D. CRISTEA, D. MUNTEANU, Transilvania University of Brasov, Material Science
Department, Materials Science and Engineering Faculty, ROMANIA
I. VYRIDES, Cyprus University of Technology, Department of Environmental Science and Technology, CYPRUS
A. ANAYIOTOS, Cyprus University of Technology, Department of Mechanical and Materials Science and
Engineering, CYPRUS
Section VII
VII.PO.1. Vision of safety research about fire resistance of materials
A. OLAH, A.B. PUIU, P.L. CONDREA, Transilvania University of Brasov, ROMANIA
Hall G
9.3019.00: Exhibitions (Namicon, Olympus, Innovatest, Sartorom, Standard Service, Medist
Life Science, Leica Microsystems)
ARO night bar

20.00: Gala dinner
Saturday, 11.03.2015
Main Hall A
9.30: Closing Ceremony, Poster Awards
Hall G
9.0013.00: Exhibitions (Namicon, Olympus, Innovatest, Sartorom, Standard Service, Medist Life Science, Total Spectrum)
10.00: Sightseeing program meeting, 41A Iuliu Maniu Str., Braov
11.00: Visit of Bran castle
13.30: Picnic in Bran
33
PROGRAM
Advanced Metallic, Ceramic and MMC Composite Materials and Technologies-C08

http://www.unitbv.ro/Default.aspx?alias=www.unitbv.ro/mmcen&
The R&D Topics of Advanced Metallic, Ceramic and Composite Materials and
Technologies C08
Synthesis and analysis

of ferrous or Rapid prototyping
nonferrous alloys and
of special materials Advanced
materials
Computer-aided modelling and

simulation of the processes of
synthesis and processing of materials
Research scope and aims:

Development of advanced materials research activities, in full accordance with the
interests and needs required by materials science;
synthesis of advanced metallic, ceramic and composite materials;
engineering of surfaces (synthesis of thin layers, generation of special surfaces using
various technologies, characterization of their properties);
characterization of materials;
computer-aided modelling and simulation of the processes of synthesis and processing of
materials.
The research activity of the team was always performed in collaboration with similar
research groups in the country and abroad. Over 25 national Universities, Research
Institutes, Economic Enterprises and over 17 international Universities, Research Institutes,
Economic Enterprises were permanent or regular collaborators in solving common themes.
The research infrastructure used, always adapted to requirements, was supplemented
by acquisitions provided by the funding of the conducted research contracts. This was
considerably enriched by the construction of the ICDT institute of the Transilvania University
of Brasov, which the C08 laboratory is part of.
34
PROGRAM
35
PROGRAM
36

Program Bramat2017

Uploaded by

Program Bramat2017

Uploaded by

Braov - ROMANIA

March 8 - 11, 2017

Namicon, Olympus, Innovatest, Sartorom, Standard Service

Conference Steering Committee

Daniel MUNTEANU, Conference Chairman

Conference Local Organizing Committee Conference Sections

Bogdan ANDREESCU I. Metallic materials

International Advisory Committee

Horia ALEXANDRU, University of Bucharest, ROMANIA

17.10: The need to re-engineer engineering studies

18.30: Violin & piano concert

9.20: Companies introduction

10.00: Coffee Break

10.00: P.01. In-situ and operando TEM for materials analysis

11.00: P.03. Optimization of Au/TiO2 thin films towards optical (bio)sensing

11.30: Coffee Break

12.30: P.05. Properties optimisation of Ti-based biomaterials by structural design

13.00: P.06. Photoactive polymers and composites

15.55: III.O.2. Dielectric properties of Sr-doped BaZrO3

15.40: Oral presentations Ic (Section IV)

15.40: IV.O.1. Multi composite protective layers for geothermal conditions

16.10: IV.O.3. Relative humidity effect on the adhesion energy in MEMS

15.20: VIII.K.2. Nanocarbons-Mg composites for hydrogen storage

16.10: VIII.O.3. The development of special magnesium alloys by ultrarapid solidification

16.45: Coffee Break

I.PO.2. Thermal processing of a titanium alloy with aeronautical applications

I.PO.3. Tribological behavior of distaloy DC components

I.PO.9. New FeMnSi+AL alloy proposed for high damping capacity

I.PO.11. Titanium influence on the microstructure of FeCrAl alloys

I.PO.15. Reduction of CuO in H2 by using concentrated solar energy

I.PO.16. Determination of discrete microstructural modifications in grey cast irons

I.PO.18. Passive film on titanium-tantalum alloys. 1) EIS study

I.PO.22. Isothermal diagrams of intermetallic phases formation in heat-resistant titanium alloys

I.PO.27. Dendritic segregation of Zn-Al eutectoid alloys

I.PO.30. Relationship between deformation and recrystallization texture in copper wire

III.PO.2. Few-layer graphene encaspulated Fe-Co nanoparticles

III.PO.3. Photoactive glazed polymer-cement composites

III.PO.4. Photoactive polymer-cement composites for tannins removal from wastewaters

III.PO.6. Wood-polyethylene composites with alkylphosphonium and alkylammonium ionic liquids as

M.P. ARRIETA, Instituto de Ciencia y Tecnologa de Polmeros (ICTP-CSIC), Madrid, SPAIN

III.PO.8. AlMg/AlN obtaining through thermodynamics combined with experimental investigation

III.PO.11. Structural and magnetic properties of quartz sand

III.PO.13. Porous AlMg-SiC composites structure modeling by means of fractal analysis

III.PO.15. Microwave melting and processing of metallic powder MMC castings

III.PO.16. Surface characterization of thermally treated lignocellulose panels

III.PO.18. Natural resin materials - spectral and chromatographic investigation

III.PO.22. Mineral investigations of Romanian wheat and flour

III.PO.24. Analyzing the ballistic impact performance of laminated composites

III.PO.25. Thermal and thermorheologic characterization of different polyolefin waste fractions

VI.PO.2. Characterization of the surfaces obtained by gouging

VI.PO.3. Solid state welding technologies for aerospace applications

VI.PO.4. A study on friction stir welding process of AA2219-t87 Al-Cu alloy

VI.PO.5. Overview of joining dissimilar materials: metals and polymers

VI.PO.6. Overlap laser welding of thin polycarbonate sheets

VI.PO.11. Dissimilar laser welding of pure aluminium and copper

16.00: Workshop Prelucrarea/valorificarea inovativ a deeurilor cu coninut de metale

Analiza comparativ a tehnologiilor de prelucrare a deeurilor de metale neferoase. Implicaii ecologice

Prezentarea proiectului Programul Operaional Competitivitate 2014-2020, contract 17/2016 TRANSECOTEH

Hall R (Transilvania University Multicultural Center)

Chairperson: Luis CUNHA, Universidade do Minho, Braga, PORTUGAL

10.30: P.09. Reinforcement effectiveness on mechanical performances of composites obtained by powder

11.00: Coffee Break

12.30: I.O.8. Optimal choice of multi-pass turning parameters in metal cutting

13.15: I.O.11. Effect of strain hardening on precipitation kinetics in ATI 718PLUS

12.55: II.O.4. Corrosion behavior of biodegradable FeMnSi-MgCa alloy

11.30: III.O.5. Eco efficient melting of ceramic frits

12.00: III.O.7. Characterization of thermoplastic bearings by using of horizontal rotational forming

12.45: III.O.10. Efficient type of batteries for electric vehicles powering

13.15: III.O.12. Effect of walnut shell reinforcement on polymer matrix composites

11.30: IV.O.5. Coating of liquid wood sheets

11.50: V.K.2. The role of hydrogen in materials degradation

12.10: Oral Presentations IIe (Section V)

12.25: V.O.2. Synthesis and properties of Cu2ZnSnS4 nanoparticles

15.15: V.O.7. Deposition of TiO2 nanostructures by MOCVD with metallocene catalysts

15.45: V.O.9. Morphological analysis of magnetic nanomaterials through comparative methods

16.15: V.O.11. Exfoliation of graphite in carbon arc discharge