Key Scan - Vehicle Application Guide

SPi Vehicle Application Guide
KEYS Pro SD2.
KEYS vehicle applications Guide for the SPi
This guide provides you with vehicle coverage information and processes for your
SPi KEYS Pro subscription.
For more guides visit the SP Diagnostics Support website www.spsupport.com and go to the
Products – KeyScan – Documents section of the site.
Version 1.001

Contents
Contents .......................................................................................................................... 1
Introduction to Key Programming ..................................................................................... 4
Keys ..................................................................................................................................................... 4
Remote Controls................................................................................................................................. 4
Audi, Seat, Skoda, Volkswagen - VAG................................................................................ 5

Introduction ........................................................................................................................................ 5
Pin Extraction Software flow chart .................................................................................................... 5
VAG Software flow chart ................................................................................................................... 6
KeyFob Programming Procedure (Remote)....................................................................................... 7
Daewoo.......................................................................................................................... 10
Introduction ...................................................................................................................................... 10
Daewoo Software flow chart ........................................................................................................... 11
FIAT................................................................................................................................ 12
Introduction ...................................................................................................................................... 12
Fiat Software flow chart – CAN Immobiliser ................................................................................... 13
Ford ............................................................................................................................... 14
Introduction ...................................................................................................................................... 14
Ford Software flow chart – Pats1 .................................................................................................... 15
Ford Software flow chart – Pats1 Escort & Courier......................................................................... 16
Ford Software flow chart - Pats2 Petrol & Diesel............................................................................ 17
Ford Software flow chart – Pats3 .................................................................................................... 18
Ford Software flow chart – Pats3 SCP Galaxy ................................................................................. 19
KeyFob Programming Procedure (Remote)..................................................................................... 20
Programming procedure using Master Key ..................................................................................... 30
Ford Coded Access............................................................................................................................ 31
Using the Pincode Access on the SPi handset............................................................................... 31
Connecting back into the vehicle to complete the process .......................................................... 34
GM / Opel ...................................................................................................................... 35
Introduction ...................................................................................................................................... 35
GM Software flow chart – Immo 1 .................................................................................................. 37
GM Software flow chart – Immo 2 .................................................................................................. 38
GM Software flow chart – Remote Fob Programming.................................................................... 39
GM Software flow chart – Immobiliser 3 (CAN) .............................................................................. 40
GM Software flow chart – Immobiliser 4 (Corsa-D) ........................................................................ 41
HONDA .......................................................................................................................... 42
Introduction ...................................................................................................................................... 42
Honda Software flow chart .............................................................................................................. 43
Honda Key Fob Programming Procedure (Remote) ........................................................................ 44
Mitsubishi ...................................................................................................................... 45
Introduction ...................................................................................................................................... 45
Mitsubishi Software flow chart ....................................................................................................... 46
Mitsubishi L200 Software flow chart ............................................................................................... 47
Mitsubishi L200 Remote Software flow chart ................................................................................. 48
Mitsubishi Colt 2003 Onwards Software flow chart ....................................................................... 49
1
NISSAN ........................................................................................................................... 51
Introduction ...................................................................................................................................... 51
NATS 5 Software flow chart ............................................................................................................. 52
Key Fob Programming Procedure (Remote) .................................................................................... 53
LandRover ...................................................................................................................... 54
Introduction ...................................................................................................................................... 54
LandRover Software flow chart ....................................................................................................... 55
LandRover CCU Software flow chart ............................................................................................... 56
PSA .......................................................................................................................................................56
Introduction ...................................................................................................................................... 57
PSA Software flow chart .................................................................................................................. 58
BSI-1 .............................................................................................................................................. 58
BSI-2, BSI-3 & BSI-4 systems, CAN Bsi ........................................................................................... 59
“Old” BSI........................................................................................................................................ 60
Immo 1 .......................................................................................................................................... 61
BSI Wake-Up procedure ................................................................................................................... 71
BSI activation ................................................................................................................................ 71
Renault .......................................................................................................................... 72
Introduction ...................................................................................................................................... 72
Program Keys Software Flow chart ................................................................................................. 73
Clio 1, Kangoo 1, Laguna 1, Master 1 ............................................................................................ 73
Clio 2, Espace, Kangoo 2, Laguna 2, Master 2, Traffic 2................................................................ 74
Megane 1, Scenic 1 ....................................................................................................................... 75
Program Keys Manual Process......................................................................................................... 76
Megane 1, Scenic 1 ....................................................................................................................... 76
Rover ............................................................................................................................. 80
Introduction ...................................................................................................................................... 80
Read EKA Code flow chart................................................................................................................ 81
5AS Program Remote flow chart ..................................................................................................... 82
Pektron Program Remote flow chart............................................................................................... 83
Immobiliser matching flow chart..................................................................................................... 84
Re-initialising Procedure ............................................................................................................... 85
3AS Manual Coding .......................................................................................................................... 85
SAAB .............................................................................................................................. 86
Introduction ...................................................................................................................................... 86
SAAB Software flow chart ................................................................................................................ 87
2
Subaru ........................................................................................................................... 87
Introduction ...................................................................................................................................... 88
Subaru Software flow chart ............................................................................................................. 89
Suzuki ............................................................................................................................ 91
Introduction ...................................................................................................................................... 91
Program Keys Software flow chart .................................................................................................. 92
Toyota / Lexus ................................................................................................................ 94

Introduction ...................................................................................................................................... 94
Program Keys Software flow chart .................................................................................................. 95
Erase Key Software flow chart ......................................................................................................... 95
Applications List ............................................................................................................. 98
3
Introduction to Key Programming
Keys
Many of today‟s vehicles have coded engine immobiliser systems, which are designed to immobilise
the vehicle by disabling many of the vehicle‟s electrical circuits, including starter motor, ignition and
fuel systems. The vehicle‟s immobiliser system is disarmed by the use of the vehicle‟s “coded key”
which is programmed to the immobiliser system.
The vehicle‟s key‟s contains a (Transponder) code that must match the code in either the vehicles
Immobiliser system or Engine Management System (EMS). Every time the vehicle is started, the
immobiliser system checks to see if the code from the key is correct.
Until now the vehicle would need to be returned to the manufacturer‟s Main Dealer to have additional
keys added to the vehicle.
Using the iKEYS application software you are now able to buy a replacement key and program it to
successfully start the vehicle. The sequence for programming the key is very specific and must be
carried out exactly as described on the iKEYS application software.
Some vehicles require a security code to be entered before you can successfully program an
additional key, and these are usually supplied with the vehicle. If the security code has been
misplaced or lost then you will be required to obtain the security code from the manufacturer.
For the Volkswagen Audi Group (VAG), the iKEYS software is able to automatically extract the
security code from the vehicle. This can be done from the Engine management system EMS. Once
you know this code you can make the correct selection and extract the security codes for the vehicle.
Some vehicles have a time delay, so if an incorrect security code is entered, the system will prevent
any further attempts for programming until a specified period of time has elapsed. Therefore it is
important to be sure you are entering the correct security code for the vehicle. VAG allow you to
attempt to enter the security code a defined number of times according to the immobiliser system
fitted to the vehicle before applying the time delay.
Remote Controls
Many of today‟s vehicles have remote controls (key fobs) that enable you to turn off the alarm and
operate the central locking system to open / close the doors without using the key. These remote
controls also need to be programmed, when ever the battery is replaced / new remote control is
purchased.
There are different methods employed to carry out these programming procedures, which are either
through a manual process or a diagnostic software process. Again these procedures are very precise
and require the user to follow the procedure exactly, to program the remote control.
4
Audi, Seat, Skoda, Volkswagen - VAG
Introduction
VAG immobiliser systems use a 4 digit security code to access the vehicle‟s Key programming
procedures. This will be a 4 digit security code that would have been supplied on a white tag when the
vehicle was new. VAG main dealers do not have the ability to supply the security code without the car
being present and connecting the VAG online diagnostic system to extract the security code from the
vehicle. For this reason the iKEYS Software is supplied with the „VAG Pin Extraction‟ software to
enable you to extract the security code from the vehicle.
We currently support 2 methods Engine and Dashboard
Engine
This will work on most petrol vehicles that have the engine management system ECM type ME7.x and
all Diesel systems that have the engine management system ECM type EDC15x fitted (where x is the
EMS system variation).
Dashboard
This method will supply a Pin code for vehicles fitted with a supported VDO dashboard.
Once you have extracted the Security code from the vehicle you will then be able to successfully
program the new key.
Before programming the new key, ensure all the existing keys for the vehicle are available. As the
procedure for programming a new key, will erase all the existing keys from the immobiliser system
and require the existing keys to be re-programmed back into the vehicle.
Pin Extraction Software flow chart
INITIALISING
PLEASE WAIT...
READING MEMORY UNABLE TO EXTRACT

PLEASE WAIT PIN CODE. PLEASE
IDENTIFY YOUR
DASHBOARD AND TRY
VEHICLE SPECIFIC
PIN CODE
EXTRACTION
1234
<OK>
TURN IGNITION OFF
<OK>
5
VAG Software flow chart
NOTE – KEY PROGRAMMED

ENSURE ALL KEYS ARE SUCCESSFULLY <OK>
PRESENT BEFORE
PROCEEDING AND YOU
HAVE OBTAINED THE 4
DIGIT PIN CODE
REMOVE CURRENT KEY.
INSERT NEXT KEY
AND SWITCH IGNITION
INITIALISING ON <OK>
PLEASE WAIT...
PROGRAMMING KEY
PLEASE WAIT...
-----PART NUMBER-----
XXXXXXXX
XXXXXXXXXXXXX
XXXX
KEY PROGRAMMED
SUCCESSFULLY <OK>
SELECT FUNCTION:
1)READ CODES
2)CLEAR CODES
3)PROGRAM KEYS
ENTER PIN CODE: PIN NOT ACCEPTED

XXXX
<OK> <ESC>
LOGIN SUCCESSFUL KEY CODING FAILED
ENTER NUMBER OF
KEYS TO PROGRAM:
If more than
1 Key
programmed PROGRAMMING KEY
PLEASE WAIT...
6
KeyFob Programming Procedure (Remote)
Audi A2 00-06 Volkswagen Lupo 98-05
Audi A3 96-03 Volkswagen Polo 02 on
Audi A6 97-05 Seat Ibiza 02 on
Audi TT 98-06 Seat Cordoba 02 on
Audi A4 94-01 Seat Toledo 99-05
Audi A4 01 on Seat Leon 99-05
Seat Arosa 97-05
Re-initialising Procedure
Note. If battery is replaced inside key fob or if key fob buttons are operated repeatedly whilst vehicle
is out of range and central locking / alarm system becomes inoperative, carry out the following re-
initialising procedure.
Press and release either the “Lock” or “Unlock” button on the key fob.
Typical VAG 2-button Key fob Typical VAG 3-button Key fob
Within the next 30 seconds: Using the key manually lock and unlock the driver‟s door.
Key fob is re-initialised.
Repeat above procedure to re-initialise any remaining key fobs.
Confirm operation of key fob by locking and unlocking vehicle using key fob buttons.
Seat Ibiza 93-99

Seat Cordoba 93-99
Seat Toledo 91-99
Re-initialising Procedure – Infrared Key fobs
Point key fob at infrared receiver located in rear view mirror

Press both the “Lock” and “Unlock” buttons together on the key fob twice
7

Re-initialising Procedure – Radio frequency Key fobs
Press both the “Lock” and “Unlock” buttons together on the key fob twice

Skoda Octavia 98-04

Volkswagen Beetle 98 on
Volkswagen Golf 97-04
Volkswagen Bora 97-05
Re-initialising Procedure (01-04 vehicles only)
Skoda Octavia’s manufactured before 2001, can not be re-initialised and require programming. Refer
to programming section.
Press either the “Lock” or “Unlock” button on the key fob
8
Within the next 60 seconds: Manually “Unlock” driver‟s side door

Repeat above procedure to re-initialise any remaining key fobs
Skoda Superb 02 on
Volkswagen Sharon 97 on
Re-initialising Procedure – Radio frequency key fobs (Type 2)
Press either the “Lock” or “Unlock” button for 1 second on the key fob
Manually “Unlock” or “Lock” the vehicle using the key

Confirm operation of key fobs by locking and unlocking vehicle using key fob buttons.
9
Daewoo
Introduction
Daewoo Key programming does not require a pin code. All the keys need to be present when coding
a key, any key not present will be erased.
To Erase a lost key Program all remaining keys.
If after programming a key the vehicle does not start, wait 10 Minutes and try again, or Disconnect
battery for 10 Minutes.
10
Daewoo Software flow chart
INITIALISING SWITCH IGNITION OFF

PLEASE WAIT... <OK>
ENTER NUMBER OF PLEASE WAIT...

KEYS TO PROGRAM: -[ ]-
PROGRAMMING KEY SWITCH IGNITION Cycle 3

PLEASE WAIT... ON...
<OK>
times
REMOVE KEY. INSERT PLEASE WAIT...

NEXT KEY AND SWITCH -[ ]-
IGNITION ON WITHIN
10sec <OK>
INSERT FIRST KEY &

PROGRAMMING KEY TURN IGNITION ON
PLEASE WAIT... <OK>
KEY PROGRAMMED
SUCCESSFULLY <OK>
11
FIAT
Introduction
Fiat Key programming requires a 5 digit Pin number, this can be found on the Key card provided with
the vehicle or obtained from the Dealer.
All the keys need to be present when coding a key, any key not present will be permanently erased.
To erase a lost key Program all remaining keys.
12
Fiat Software flow chart – CAN Immobiliser
ENTER PIN CODE: ENTER NUMBER OF

XXXX REMOTES TO PROGRAM:
<OK> <ESC> 2
ENTER NUMBER OF PLEASE COMPLETE

KEYS TO PROGRAM: PROGRAM
OPERATIONWITHIN 15
2 SECS <OK>
ANY KEY NOT PRESENT WILL PRESS AND HOLD REMOTE

BE DELETED CONTINUE? FOR 3 SECONDS
NO
YES
PROGRAMMING KEY PLEASE SWITCH IGNITION OFF

WAIT... AND REMOVE KEY FROM
IGNITION. <OK>
INSERT NEXT KEY & TURN NUMBER OF REMOTE(S)

IGNITION ON PROGRAMMED: 1
<OK>
THERE ARE 3 KEYS

PROGRAMMED
<OK>
DO YOU WANT TO PROGRAM

REMOTES?
yes
NO
YES
13
Ford
Introduction
Ford has a number of different systems fitted across the range. These are known as PATS (Passive
Anti-Theft System) and have timed access or coded access in order to gain security the vehicle. This
timed access can vary from 8 minutes to 12 minutes.
Coded access is a system where the vehicle gives you a “Out-Code” and requires you to input an “In-
Code” this is supplied by the Ford Dealer from the out code.
The iKeys software will allow you to re-enter an In-Out Pair for a vehicle, this is a Out-code obtained
from the vehicle and a In-code obtained from Ford. A matching pair will always be valid for that
vehicle.
Once the system has gained access you are able to program the keys to the vehicle.
A minimum of 3 Keys must be programmed to the PATS 1 system before the vehicle will start, and 2
Keys to the PATS 2 and PATS 3 systems before the vehicle will start.
14
Ford Software flow chart – Pats1
INITIALISING
PLEASE WAIT...
THERE ARE 2 KEYS

PROGRAMMED
<OK>
<>
SWITCH IGNITION OFF
<OK>
SWITCH IGNITION
ON...
<OK>
ENTER NUMBER OF
KEYS TO PROGRAM:
WAITING FOR SECURITY

ACCESS
COUNTDOWN:
7Min(s) 00Sec(s)
SWITCH IGNITION OFF
<OK>
SWITCH IGNITION PROGRAM NEXT KEY

ON...
<OK> <OK>
KEYS PROGRAMMED
SUCCESSFULLY
<OK>
15
Ford Software flow chart – Pats1 Escort & Courier
TO PROGRAM A NEW SET

OF KEYS ONE 'RED'
MASTER AND TWO SLAVE
KEYS ARE REQUIRED.
SWITCH IGNITION OFF

<OK>
SWITCH IGNITION OFF

<OK>
INSERT 'RED' MASTER

KEY AND SWITCH
IGNITION ON. <OK>
SWITCH IGNITION
ON...
<OK>
INITIALISING
PLEASE WAIT...
PROGRAMMING KEY
PLEASE WAIT...
UNABLE TO OBTAIN WAITING FOR SECURITY
SECURITY ACCESS. ACCESS
COUNTDOWN:
<OK> 8Min(s) 00Sec(s)
REMOVE CURRENT KEY.

INSERT NEXT KEY AND
UNABLE TO OBTAIN WAITING FOR SECURITY SWITCH IGNITION ON
SECURITY ACCESS. ACCESS <OK>
COUNTDOWN:
<OK> 16Min(s) 00Sec(s)
PROGRAMMING KEY
SWITCH IGNITION OFF PLEASE WAIT...
<OK>
SWITCH IGNITION PROGRAMMING

ON... COMPLETE!
<OK>
16
Ford Software flow chart - Pats2 Petrol & Diesel
ENTER NUMBER OF
KEYS TO PROGRAM:
INSERT 'RED' MASTER

KEY AND SWITCH
IGNITION ON.
INITIALISING
PLEASE WAIT...
Diesel WAITING FOR SECURITY UNABLE TO OBTAIN

ACCESS SECURITY ACCESS.
COUNTDOWN:
8Min(s) 00Sec(s) <OK>
WAITING FOR SECURITY
ACCESS
COUNTDOWN:
Petrol
8Min(s) 00Sec(s)
RIM SUCCESSFULLY
ERASED
<OK>
SWITCH IGNITION OFF
AND REMOVE KEY FROM
IGNITION. <OK>
INSERT 'RED' MASTER

KEY AND SWITCH
IGNITION ON.
REMOVE KEY. INSERT

NEXT KEY AND SWITCH
Cycle for IGNITION ON WITHIN
all keys 10sec <OK>
SWITCH IGNITION OFF PROGRAMMING

<OK> COMPLETE!
17
Ford Software flow chart – Pats3
REMOVE KEY FROM

IGNITION <OK>
INSERT KEY TO PROGRAM

AND SWITCH IGNITION
ON. <OK>
ENTER NUMBER OF KEYS

TO PROGRAM:
NOTE: INITIALISING UNABLE TO OBTAIN

Some 2004 > vehicles use “in / out PLEASE WAIT... SECURITY ACCESS.
code” security that must be
obtained from a Ford dealership. <OK>
Coded
Access
VEHICLE OUTCODE: Timed
Access
123456
WAITING FOR SECURITY If time limit UNABLE TO OBTAIN
exceeded
<OK> ACCESS SECURITY ACCESS.
COUNTDOWN:
10Min(s) 0Sec(s) <OK>
ENTER IN-CODE:
0000
<OK> PROGRAMMING KEY KEY CODING FAILED

Fail
PLEASE WAIT…
<OK>
KEY PROGRAMMED
SUCCESSFULLY <OK>
REMOVE KEY. INSERT REGISTRATION FAILURE.

Fail
NEXT KEY AND SWITCH TIME EXCEEDED. <OK>
IGNITION ON WITHIN
10sec <OK>
18
Ford Software flow chart – Pats3 SCP Galaxy
INSERT KEY TO
PROGRAM AND SWITCH
IGNITION ON.
<OK>
INITIALISING
PLEASE WAIT...
If time limit
exceeded
WAITING FOR SECURITY REGISTRATION
ACCESS FAILURE, TIME
COUNTDOWN: EXCEEDED. <OK>
8Min(s) 0Sec(s)
INITIALISING KEY CODING FAILED

Fail
PLEASE WAIT...
<OK>
KEY PROGRAMMED
SUCCESSFULLY
<OK>
19
Sport Ka 03 on
Street Ka 03 on
Fiesta 00-02
Fiesta 02 on
Fusion 02 on
Mondeo 01-
Cougar 98-01
Focus C Max 03 on
Programming Procedure
Note. If the central locking / alarm system is malfunctioning or a replacement key fob is obtained. The
following programming procedure is required to be carried out before the key fob will operate
correctly.
Close all doors

Switch the ignition “ON” 4 times within 6 seconds
Switch the ignition “OFF”
Programming mode activated for approximately 10 seconds:
o Press and release any button on the key fob
Typical 3-button key fob Later style 3-button key fob
o An audible warning will sound and the system Alarm LED will flash to indicate
successful programming
After the first key has been programmed, the 10 seconds programming mode automatically
starts again for the next key
Repeat above procedure to re-program any remaining key fobs.
To exit programming mode: Switch ignition “ON” or wait 10 seconds
Note. A maximum of 4 key fobs can be programmed to the vehicle.
20
Fiesta 95-99
Mondeo 93-96
Puma 97-02
Programming Procedure – Infrared key fobs
Note. If the central locking / alarm system is malfunctioning, key fob batteries have been
replaced or a replacement key fob is obtained. The following programming procedure is
required to be carried out before the key fob will operate correctly.
Obtain all keys fitted with remote key fob for vehicle
Using any key, switch the ignition to position “I”
Wait approximately 10 seconds
System Alarm LED should illuminate
Note. System Alarm LED illuminates for approximately 5 seconds
Whilst system Alarm LED is illuminated:

o Switch the ignition “OFF” and remove the key
Programming mode activated for approximately 20 seconds (System alarm LED
remains illuminated):
o Point the key fob at the infrared receiver

 Fiesta and Puma: located near interior lamp
 Mondeo: located in front door handles
o Press and hold the “Unlock” button on the key fob
Typical 3-button key fob Typical 2-button key fob
o After approximately 1 second, the LED on the key fob will flash once
o Press and release the “Lock” button on the key fob between 3 to 5 times,
whilst still holding in the “Lock” button on the key fob
o Release the “Unlock” button on the key fob
o Continue to point the key fob at the infrared receiver until both the system
Alarm LED and key fob LED have flashed 5 times
To exit programming mode: Switch ignition “ON” and “OFF” and wait approximately
20 seconds
21
Programming Procedure – Radio frequency key fobs
Fiesta and Puma vehicles only
Note. If the central locking / alarm system is malfunctioning or a replacement key fob is
obtained. The following programming procedure is required to be carried out before the key
fob will operate correctly.
Obtain all keys fitted with remote key fobs

Switch the ignition “OFF” and remove key from ignition switch
o Type 1 key fob: Press and release either the “Lock” or “Unlock” button on the
key fob
Typical 2-button key fob
o Type 2 Key fob: Press and release any button on the key fob
22
According to model: Wait for either the System Alarm LED or Fog lamps “ON”
warning lamp to illuminate and / or the vehicle to emits an audible warning sound to
indicate correct programming
Within 20 seconds: Repeat above procedure to re-program any remaining key fobs.
To exit programming mode: Switch ignition “ON” and wait 20 seconds
Focus 98-05
Obtain all keys with remote key fobs

Fasten all seat belts and close all doors
Switch the ignition between position I to position II 4 times within 6 seconds
Switch the ignition to position I (up to 11/2000) or Switch the ignition “OFF” 12/2000
on
Programming mode activated for approximately 10 seconds:
o Press and hold either the “Lock”, “Unlock” or “boot release” button on the key
fob
23
An audible warning will sound to indicate successful programming
Within the next 10 seconds: Repeat above procedure to re-program any remaining
key fobs
To exit programming mode: Switch the ignition to position III or wait 10 seconds
Mondeo 96-00
Note. If the central locking / alarm system is malfunctioning, key fob batteries have been
replaced or a replacement key fob is obtained. The following programming procedure is
required to be carried out before the key fob will operate correctly.
Obtain all keys fitted with remote key fob for vehicle
Fasten seat belts and close all doors
Using any key, switch the ignition from position “I” to position “II” at least 4 times in 6
seconds
Programming mode activated for approximately 10:
o Point the key fob at the infrared receiver (located in front door handles)
o Press and hold either the “Lock” or “Unlock” button on the key fob
An audible warning will sound to indicate successful programming

Within the next 10 seconds: Repeat above procedure to re-program remaining key
fobs
To exit programming mode: Start the engine and wait 10 seconds
24

Switch the ignition “OFF” and remove key from ignition switch
o Type 1 key fob: Press and release either the “Lock” or “Unlock” button on the
key fob
o Type 2 Key fob: Press and release either the “Lock” or “Unlock” button on the
key fob
The system Alarm LED will flash to indicate successful programming

Wait 2 seconds
Within 20 seconds: Repeat above procedure to re-program remaining key fobs.
To exit programming mode: Switch ignition “ON” and wait 20 seconds
25
Tourneo Connect 02 on
Transit Connect 02 on
Transit 00-06

Switch the ignition from “OFF” to “ON” 8 times within 10 seconds
Leave the ignition in the “ON” position
Programming mode activated - doors “Lock” and then “unlock”
Within 20 seconds:
o Press and release any button on the first key fob to be programmed
o Doors “Lock” and then “Unlock” to indicate correct programming
Within 20 seconds:
o Press and release any button on the second key fob to be programmed
Within 20 seconds:
o Press and release any button on the third key fob to be programmed
Within 20 seconds:
o Press and release any button on the fourth key fob to be programmed
26
To exit programming mode: Switch ignition “OFF”
Doors “Lock” and then “Unlock” to indicate programming mode end
Galaxy 95-06
Note. If the central locking / alarm system is malfunctioning or a replacement battery is

installed or key fob is obtained. The following programming procedure is required to be
carried out before the key fob will operate correctly.
Close all windows and doors

Insert one of the keys into the driver‟s side door lock
Within 5 seconds: Turn key to “Unlock” position 3 times
Note. Insure key is held in “Unlock” position for at least 0.5 seconds.
Remove key from driver‟s side door lock
Programming mode activated with driver‟s door LED illuminated

Carry out the following within 15 seconds:
o Point key fob at infrared receiver (located near rear view mirror)
o Press and hold the “Lock” button on the key fob within 5 seconds of entering
programming mode
Typical 2-button key fob Later type 2-button key fob
Typical 2-button key fob (to be edited)
o Press the “Unlock” button 3 times on the key fob

o Release the “Lock” button on the key fob
o Correct programming of key fob indicated by driver‟s door LED flashing 6
times and key fob LED flashing 5 times
o Repeat above procedure within 15 seconds to re-program any remaining key
fobs.
o To exit programming mode and turn “OFF” driver‟s side door LED: wait 15
seconds without pressing any key fob buttons.
27
o Confirm operation of key fobs by locking and unlocking vehicle using key fob
buttons.
Note. If the central locking / alarm system is malfunctioning or a replacement battery is

installed or key fob is obtained. The following programming procedure is required to be
carried out before the key fob will operate correctly.
Close all windows and doors

Insert one of the keys into the driver‟s side door lock
Within 5 seconds: Turn key to “Unlock” position 3 times
Note. Insure key is held in “Unlock” position for at least 0.5 seconds.
Remove key from driver‟s side door lock
Programming mode activated with driver‟s door LED illuminated

Carry out the following within 15 seconds:
o Press and hold the “Lock” button on the key fob within 5 seconds of entering
programming mode
Typical 2-button key fob Later type 2-button key fob
o Press the “Unlock” button 3 times on the key fob

o Release the “Lock” button on the key fob
o Correct programming of key fob indicated by driver‟s door LED flashing 6
times and key fob LED flashing 5 times
o Repeat above procedure within 15 seconds to re-program any remaining key
fobs.
o To exit programming mode and turn “OFF” driver‟s side door LED: wait 15
seconds without pressing any key fob buttons.
o Confirm operation of key fobs by locking and unlocking vehicle using key fob
buttons.
28
Maverick 97 to 03
Note. All previous key fobs will be erased when programming mode is entered.
Switch the ignition from “OFF” to “ON” 8 times within 10 seconds

Leave the ignition in the “ON” position
Programming mode activated - doors “Lock” and then “unlock”
Within 7.5 seconds:
o Press and release any button on the first key fob to be programmed
Within 7.5 seconds:

o Press and release any button on the second key fob to be programmed
Note. If the door locks do not respond for any keyless entry remote transmitter, wait
for several seconds and press the button again.
Within 7.5 seconds:

o Press and release any button on the third key fob to be programmed
Within 7.5 seconds:

o Press and release any button on the fourth key fob to be programmed
To exit programming mode: Switch ignition “OFF” or wait up to 5 minutes

Doors “Lock” and then “Unlock” to indicate programming mode end
29
Programming procedure using Master Key
Note. If the central locking / alarm system is malfunctioning or a replacement key is

will operate correctly.
Obtain all keys
Turn master key to position II

Wait until clock LED illuminates
Switch Ignition Off
Wait until LED illuminates goes on and then Off
Within 10 seconds - insert key new and switch ignition on
LED flashes once to indicate correct programming
Switch ignition off remove key
Repeat for all other keys
30
Ford Coded Access
Using the Pincode Access on the SPi handset
1. Navigate to the appropriate vehicle and select the Keycoding option. Once
the system has established communications you will be presented with a
screen similar to this.
2. Select the Program keys option and follow the on screen instructions. You
may be asked to remove the Key from the ignintion and insert the New key.
In the case of the Ford software you are able to select 2 methods of obtaining
the Code for the vehicle.
3. If you select the PC Suite option you will be required to enter the VIN for the
vehicle. It is important that the correct VIN is entered as this will be verified
during the internet connection stage before obtaining the information required
to gain security access to the vehicle.
4. You will then be asked to unplug the unit and use the Spi Suite to upload the
information to our servers for processing.
31
Connecting the SPi handset to the Spi Suite to get the required information
5. Start the SPi Suite using either the SP Diagnostics SPi Suite icon on your
desktop or on your start menu (Start > All Programs > SP Diagnostics > SPi
Suite).
6. From the main screen click:
7. Connect your SPi as shown and click
32
8. The Spi Suite will then connect to the internet:
9. You will then be required to enter details of the vehicle you are currently
working on. Some of this information will be provided from your Spi:
10. Once the process is completed you will be able to unplug the Spi and back
into the vehicle you are working on to finish the pincode process:
33
Connecting back into the vehicle to complete the process
11. Follow steps 1 and 2 above. You will then be asked to verify the VIN code on
the vehicle again to ensure the information we have provided matches with
the vehicle you are programming the key on.
12. Security access will then be granted and you will be able to complete the
process and program the Key or Keys into the vehicle.
34
GM / Opel
Introduction
The General Motors group use an immobiliser and Engine Management Systems to immobilise the
vehicle. The immobiliser system is operated independently from the central locking system and its
main function is to stop the vehicle from starting in the event that it does not recognise the
transponder.
The vehicle is supplied with a card that contains the security code for the vehicle. This should be
located at the front of the service manual.
Agila 02 on
Note. If battery is replaced inside key fob or if key fob buttons are operated repeatedly whilst
vehicle is out of range and central locking / alarm system becomes inoperative, carry out the
following re-programming procedure.
Open driver‟s side door

Switch the ignition to the “ON” position for 1 second
Within the next 10 seconds: Switch the ignition “OFF” and remove key
Within 20 seconds either: Press and release door contact switch 3 times or close and
open driver‟s side door 3 times (leaving door open)
Switch the ignition to the “ON” position for 2 seconds
Within 10 seconds: Switch ignition “OFF” and remove key
Press and release the “Unlock” button on key fob 3 times
Doors “Lock” and “Unlock” to indicate correct programming

Repeat above procedure for all remaining key fobs
Note. A maximum of 3 key fobs can be programmed to the vehicle. If there are only 2 key
fobs available the first key must be programmed twice.
35
Corsa C 00-06
Astra G 98-04
Zafira 98-05
Astra H 04 on
Vectra B 95-02
Omega 98-03
Frontera 98-03
Vectra C 02 on
Signum 03 on
Meriva 03 on
Note. If battery is replaced inside key fob or if key fob buttons are operated repeatedly whilst
vehicle is out of range and central locking / alarm system becomes inoperative, carry out the
following re-initialising procedure.
Switch the ignition to the “ON” position

Programming mode activated for 30 seconds
Press either the “Lock” or Unlock” button on the key fob to be programmed
Central locking system operates to indicate correct re-initialising

36
GM Software flow chart – Immo 1
INITIALISING UNABLE TO PROGRAM AS

PLEASE WAIT... ALL TRANSPONDERS
HAVE BEEN PROGRAMMED
<OK>
PROGRAM KEY
TRANSPONDER KEY NO?
ENTER PIN
XXXX
<OK>
- BUSY -
PLEASE WAIT...
PROGRAMMING KEY TRANSPONDER

PLEASE WAIT... ALREADY
PROGRAMMED
<OK> <OK>
TRANSPONDER
SUCCESSFULLY
PROGRAMMED
<OK>
SWITCH OFF IGNITION

AND REMOVE KEY
<OK>
INSERT KEY
WITH IGNITION ON
<OK>
37
GM Software flow chart – Immo 2
INSERT KEY WITH

IGNITION ON
<OK>
ARE YOU SURE YOU

WANT TO PROGRAM KEYS?
YES
NO
SWITCH IGNITION
ON
PROGRAMMING KEY
PLEASE WAIT...
<OK>
SWITCH IGNITION
OFF
<OK>
PROGRAM ADDITIONAL
YES
KEYS?
YES
NO
NO
KEY PROGRAMMED
SUCCESSFULLY
<OK>
38
GM Software flow chart – Remote Fob Programming
IS SECURITY LOGIN
REQUIRED?
No YES
NO
Yes
ENTER PIN CODE: Fail PIN NOT ACCEPTED

0000
<OK> <ESC>
ACTIVATE REMOTE Fail

OPERATION FAILED.
SEVERAL TIMES NEXT TO <OK>
RECEIVER
PROGRAM ADDITIONAL
REMOTES?
YES
NO
OPERATION SUCCESSFUL.
<OK>
39
GM Software flow chart – Immobiliser 3 (CAN)
TO PROGRAM THE KEY

PLEASE FIRST ENTER
THE PIN CODE AND THEN
FOLLOW THE
INSTRUCTIONS. <OK>
ENTER PIN CODE:

0000
<OK> <ESC>
PIN NOT ACCEPTED Fail

IS THIS THE CORRECT
CODE: 1324
YES
NO
PLEASE INSERT A NEW

KEY
<OK>
SWITCH IGNITION ON..

THEN PRESS <OK>
DOES THE KEY HAVE A

VIRGIN TRANSPONDER?
YES
NO
UNABLE TO PROGRAM AS PROGRAMMING NEW KEY OPERATION

Fail
ALL 5 KEYS ARE PLEASE WAIT SUCCESSFUL.
PROGRAMMED <OK>
SWITCH OFF IGNITION REMOVE KEY FROM

AND REMOVE KEY <OK> IGNITION DO YOU WANT
TO PROGRAM ANOTHER?
<OK> <ESC>
OPERATION FAILED. SWITCH IGNITION ON..

Fail
<OK> THEN PRESS <OK>
40
GM Software flow chart – Immobiliser 4 (Corsa-D)
All Keys must be present at the time of programming, any key not present will be erased.
ENTER PIN CODE:

0000
<OK> <ESC>
ENTER NUMBER OF
KEYS TO PROGRAM:
REMOVE CURRENT KEY.

INSERT NEXT KEY
AND SWITCH IGNITION
ON <OK>
PROGRAMMING KEY Fail DATA COMMUNICATION

PLEASE WAIT... HAS FAILED, PRESS
<OK> TO RESTART OR
<ESC> TO EXIT
THERE ARE 2 KEYS

PROGRAMMED
41
HONDA
Introduction
All Keys need to be present when programming keys, any key not present will be erased. No Security
Code is needed to program keys.
42
Honda Software flow chart
NOTE - ENSURE ALL

KEYS ARE PRESENT, ANY
KEY NOT PRESENT WILL
BE DISABLED.
ENTER NUMBER OF
KEYS TO PROGRAM:
SWITCH IGNITION OFF

<OK>
SWITCH IGNITION ON
THEN PRESS <OK>
INITIALISING
PLEASE WAIT...
REMOVE CURRENT KEY.

INSERT NEXT KEY AND
SWITCH IGNITION
ON <OK>
SWITCH IGNITION OFF SWITCH IGNITION OFF

<OK> <OK>
SWITCH IGNITION ON SWITCH IGNITION ON

THEN PRESS <OK> THEN PRESS <OK>
THERE ARE 2 KEYS

PROGRAMMED
43
Honda Key Fob Programming Procedure (Remote)
correctly. Maximum of 3 Remotes can be programmed
Obtain all remote controls

Switch the ignition “ON”
Within 4 Seconds – Press the Unlock or Lock Button
Within 4 Seconds – Switch the Ignition “OFF”
Within 4 Seconds – Switch the Ignition “ON”
The system should Unlock or Lock the vehicle
Within 15 Seconds - Press the Unlock or Lock Button of each remote that is to be
programmed
Switch the Ignition “OFF”
Remove the Ignition Key
Check the operation of each remote Fob.
Lock
Unlock
44
Mitsubishi
Introduction
All Keys need to be present when programming keys, any key not present will be erased. No Security
Code is needed for Vehicle listed in the Software.
The Dashboard Warning lamp will flash while programming to indicate that the vehicle is in diagnostic
mode.
L200 Remotes are coded diagnostically via the separate menu Item
Colt 2003 Onwards Remotes are coded at the same time as the key.
45
Mitsubishi Software flow chart
ENTER NUMBER OF
KEYS TO PROGRAM:
SWITCH IGNITION OFF

<OK>
SWITCH IGNITION ON
THEN PRESS <OK>
INITIALISING
PLEASE WAIT...
PROGRAMMING KEY PIN NOT ACCEPTED

Fail
PLEASE WAIT...
REMOVE CURRENT KEY.

INSERT NEXT KEY AND
SWITCH IGNITION
ON <OK>
PROGRAMMING KEY Fail KEY CODING FAILED

PLEASE WAIT... <OK>
THERE ARE 2 KEYS Pass KEY PROGRAMMED

PROGRAMMED SUCCESSFULLY <OK>
46
Mitsubishi L200 Software flow chart
ENTER NUMBER OF
KEYS TO PROGRAM:
PROGRAMMING KEY UNABLE TO OBTAIN

PLEASE WAIT... Fail SECURITY ACCESS.
<OK>
REMOVE CURRENT KEY.

INSERT NEXT KEY AND
SWITCH IGNITION ON
<OK>
KEY PROGRAMMED
SUCCESSFULLY <OK>
47
Mitsubishi L200 Remote Software flow chart
INITIALISING
PLEASE WAIT...
ACTIVATE REMOTE
SEVERAL TIMES NEXT TO
RECEIVER
THERE IS ONE REMOTES

PROGRAMMED
48
Mitsubishi Colt 2003 Onwards Software flow chart
ENTER NUMBER OF
KEYS TO PROGRAM:
PROGRAMMING KEY
PLEASE WAIT...
SWITCH IGNITION
OFF AND REMOVE KEY
FROM IGNITION. <OK>
PROGRAMMING KEY
PLEASE WAIT...
INSERT FIRST KEY &

TURN IGNITION ON
REMOVE CURRENT KEY.

INSERT NEXT KEY AND
SWITCH IGNITION
ON <OK>
PROGRAMMING KEY Fail KEY CODING FAILED

PLEASE WAIT... <OK>
KEY PROGRAMMED
SUCCESSFULLY <OK>
49
Key Fob Programming Procedure (Remote)
Connect a link wire between Pin 4 and Pin 1 on the J1962 Connector
Close all Doors
Turn Ignition to ACC position and the back to Off 3 Times with in 10 Seconds
Doors Should lock then unlock
Press remote control lock or Unlock button once
Press remote control lock or Unlock button twice within 10 Seconds
Doors Should lock then unlock
Repeat for Second Remote
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
J9162 Connector Vehicle

Side
50
NISSAN
Introduction
The iKeys software supports the Nissan NATS5 immobiliser system, A 4 digit pin code is required to
program keys for this system, and this is supplied with the vehicle, however if the Immobiliser label
has a large letter A on it then the PIN is fixed to 5523.
Note. Not all keys need to be present, as programming a key is adding that key to the system. The
removal of all of the keys is a separate function in the iKEYS software menu.
51
NATS 5 Software flow chart
ENTER PIN CODE:

0000
<OK> <ESC>
PROGRAMMING KEY PIN NOT ACCEPTED

PLEASE WAIT...
KEY PROGRAMMED
SUCCESSFULLY <OK>
52
To enter programming mode
Switch Ignition “ON” and “OFF” 6 times within 10 Seconds
After 2 Seconds the indicators will flash two times
Programming mode is active for 2 minutes.
To Programme remotes
Press and Hold “Unlock” button
Press “Lock” button 3 times
Release “Unlock” button
Indicators will flash once to conform programmed correctly
Repeat for all remaining remotes
If 4 remotes have been programmed the indicators will flash 3 times
If Less than 4 remotes programmed Switch Ignition On, Indicator lights will flash twice.
Check Operation of all remotes
Lock
Unlock
Typical NATS5 Key
53
LandRover
Introduction
The iKeys software supports the Immobiliser on CAN Protocol for Landrover vehicles using the CAN
harness (30214100 or 302141V2) and the Landrover uniplexer (30215370)
No security pin is required; However a Programmed key or New “Virgin” Key is required to start the
programming process.
Remotes are Programmed Diagnostically.
Freelander CCU Plips Programming requires all Plips to be present when programming, any not
present will be erased from the vehicle. No Security pin is required.
.
Note. All keys need to be present; any key not present will be erased from the system.
54
LandRover Software flow chart
PLEASE INSERT KEY

INTO BARREL AT
POSITION 0 <OK>
ENTER NUMBER OF
KEYS TO PROGRAM:
KEY IN IGNITION IS ALL KEYS NOT PRESENT

DISABLED UNABLE TO WILL BE DELETED
PROGRAM <OK>
PROGRAMING PLEASE
WAIT...
INSERT NEXT KEY

PLEASE SWITCH
IGNITION TO POSITION
0
PLEASE SWITCH CLEAR COMPLETE

IGNITION TO POSITION <OK>
2 <OK>
PLEASE SWITCH PROGRAM COMPLETE

IGNITION TO POSITION <OK>
0 <OK>
CLEARING CODES PLEASE SWITCH

PLEASE WAIT... IGNITION TO POSITION
2
<OK>
55
LandRover CCU Software flow chart
INITIALISING
PLEASE WAIT...
ACTIVATE REMOTE
SEVERAL TIMES NEXT TO
RECEIVER <OK>
Yes
PROGRAM ADDITIONAL
REMOTES?
1)YES
2)NO
PROGRAMMING
COMPLETE!
56
PSA
Introduction
There are 3 different types of immobiliser systems that are used across the PSA range.
These consist of the Standard Immobiliser System (Immo), the Passenger compartment protection
control unit (CPH) and the Body systems interface (BSI).
57
PSA Software flow chart
BSI-1
NOTE –
ENSURE ALL KEYS ARE
PRESENT BEFORE
PROCEEDING AND YOU
HAVE OBTAINED THE 4
DIGIT PIN CODE
ENSURE ALL VEHICLE

DOORS ARE CLOSED
<OK>
ENTER PIN CODE:

0000
<OK> <ESC>
FAILED TO ENTER NUMBER OF REMOVE CURRENT KEY.

PROGRAM KEY <OK> KEYS TO PROGRAM: INSERT NEXT KEY AND
SWITCH IGNITION
2 ON <OK>

<OK> <OK>
SWITCH IGNITION ON SWITCH IGNITION ON

THEN PRESS <OK> THEN PRESS <OK>
INITIALISING PROGRAMMING KEY

PLEASE WAIT... PLEASE WAIT...
KEY PROGRAMMED
SUCCESSFULLY <OK>
58
BSI-2, BSI-3 & BSI-4 systems, CAN Bsi
NOTE –
ENSURE ALL KEYS ARE
PRESENT BEFORE
PROCEEDING AND YOU
HAVE OBTAINED THE 4
DIGIT PIN CODE
ENSURE ALL VEHICLE

DOORS ARE CLOSED
<OK>
ENTER PIN CODE:

0000
<OK> <ESC>
FAILED TO ENTER NUMBER OF

PROGRAM KEY <OK> KEYS TO PROGRAM:
SWITCH IGNITION OFF REMOVE CURRENT KEY.

<OK> INSERT NEXT KEY AND
SWITCH IGNITION
ON <OK>
SWITCH IGNITION ON SWITCH IGNITION OFF

THEN PRESS <OK> <OK>
INITIALISING SWITCH IGNITION ON

PLEASE WAIT... THEN PRESS <OK>
KEY PROGRAMMED
SUCCESSFULLY <OK>
59
“Old” BSI
ENSURE ALL VEHICLE

DOORS ARE CLOSED
<OK>
ENTER NUMBER OF
KEYS TO PROGRAM:
SWITCH IGNITION OFF

<OK>
SWITCH IGNITION ON
THEN PRESS <OK>
PIN NOT ACCEPTED INITIALISING

PLEASE WAIT...

<OK> <OK>
REMOVE CURRENT KEY KEY PROGRAMMED

INSERT NEXT KEY AND SUCCESSFULLY <OK>
SWITCH IGNITION ON
<OK>
PROGRAMMING KEY
PLEASE WAIT...
60
Immo 1
ENTER PIN CODE:
1234
ENSURE ALL VEHICLE
DOORS ARE CLOSED
ENTER NUMBER OF
KEYS TO PROGRAM:
SWITCH IGNITION OFF

REMOVE CURRENT KEY
<OK>
INSERT NEXT KEY
AND SWITCH IGNITION
SWITCH IGNITION ON…

THEN PRESS <OK> PROGRAMMING KEY
PLEASE WAIT...
INITIALISING
PLEASE WAIT... SWITCH IGNITION OFF
<OK>
SWITCH IGNITION OFF

<OK>
PIN NOT ACCEPTED PROGRAMMING KEY

Fail
PLEASE WAIT...
61
Citroen Saxo 99-03

Peugeot 106 99-03
Unlock the vehicle using the key

Within 30 seconds, press key fob “lock” button twice

Citroen Xsara Picaso 99 on

Peugeot 306 01 on
Citroen C3 02 on
Citroen Belingo 02 on
Peugeot 306 93-97

Press and hold the “Lock” button on the key fob for 10 seconds.
Typical 2-button key fobs
Release the lock button
62
Switch the ignition to the “OFF” position
Wait for approximately 5 seconds
Citroen Xsara 97-00

Citroen Xantia 98-01
Citroen Synergie 97-02
Citroen Evasion 97-02
Citroen Dispatch 98 on
Citroen Jumpy 98 on
Peugeot 806 98-02
Citroen Belingo 98-02

Wait for alarm system LED to turn “OFF” (if LED fitted) or wait for approximately 10 seconds
(If LED not fitted)
Within 30 seconds: Press either the “Lock” or “Un-lock” button on the key fob.
Ensure alarm system LED (if fitted) turns “ON” for a split second.
63
Citroen Xsara 00-06 Citroen 4
Citroen C5 00-04 Citroen 4
Note. If battery is replaced inside key fob / key fob has been re-programmed or if key fob buttons are
operated repeatedly whilst vehicle is out of range and central locking / alarm system becomes
inoperative, carry out the following re-initialising procedure.

Press and hold the “Lock” button on the key fob for approximately 10 seconds

Citroen Relay 02 on Citroen 7

Citroen Jumper 02 on Citroen 7

Press and hold the “Lock” button on the key fob for approximately 10 seconds
64
Peugeot 206 98-00 Peugeot 2
Unlock the Drivers door using the key

Press and hold the “Lock / Unlock” button on the key fob until the LED on the key fob stops
flashing.
Typical single button key fob
Release the “Lock / Unlock” button on the key fob

The LED on the key fob should remain illuminated
Press and release the “Lock / Unlock” button on the key fob.
The LED on the key fob should turn “OFF”
Open the driver‟s side door and sit in the driver‟s seat.
Close the driver‟s side door
Hold the key fob next to the ignition switch
Press and release the “Lock / Unlock” button on the key fob
Wait 10 seconds
Wait 5 seconds
65
Peugeot 807 00 on Peugeot 12
Switch the ignition to the “ON” position using the key fob to be programmed
Press and release the “Lock button” on the key fob
Typical 4–button key fob

Key fob is re-initialised

Peugeot 406 / Coupe 01-06 Peugeot 3

Press and hold the “Lock / Unlock” button on the key fob
The LED on the key fob should start to flash
Typical single button key fob
Wait for approximately 20 seconds and then with the “Lock / Unlock” button still held, press and
release the double locking button on the key fob.
The LED on the key fob will stop flashing
The LED on the key fob will remain illuminated
The LED on the key fob will turn “OFF”
66
Wait 10 seconds
Wait 5 seconds
Peugeot 306 97-00 Peugeot 5

Press and hold the “Lock / Unlock” button on the key fob
The LED on the key fob should start to flash
Wait for approximately 20 seconds and then with the “Lock / Unlock” button still held, press and
release the double locking button on the key fob.
The LED on the key fob will stop flashing
The LED on the key fob will remain illuminated
The LED on the key fob will turn “OFF”
Wait 10 seconds
Wait 5 seconds
67
Peugeot 406 / Coupe 98-00 Peugeot 8
Ensure ignition switch is in the “OFF” position
Note. Vehicles fitted with double locking systems:

Press both the “Lock / Unlock” and “Double locking” buttons on key fob together when carrying out the
following procedure.
Press and hold the “Lock / Unlock” button on the key fob until the LED on the key fob turns “OFF”

LED on key fob remains illuminated
Press the “Lock / Unlock” button twice on the key fob
Wait 5 seconds

Press and hold the “Lock” button on the key fob for 10 seconds
68

Remove key from ignition switch
Wait 5 seconds
Repeat above procedure to re-initialised any remaining key fobs.
Peugeot Partner 98 on Peugeot 13
Note. If battery is replaced inside key fob / key fob has been re-programmed or if key fob buttons are
operated repeatedly whilst vehicle is out of range and central locking / alarm system becomes
inoperative, carry out the following re-initialising procedure.

Wait for alarm system LED to turn “OFF” (if LED fitted) or wait for approximately 10 seconds
(If LED not fitted)
Ensure alarm system LED (if fitted) turns “ON” for a split second.
Remove key fob from ignition switch
69
Peugeot Boxer 02-06 Peugeot 14

Press and hold either the “Lock” or “Unlock” button on the key fob for approximately 10
seconds
Release the button on the key fob

Remove key from ignition switch
70
BSI Wake-Up procedure
BSI activation
The BSI can be woken up by activating certain functions i.e key Fob, opening a door, switching on the
radio or opening the bonnet. When woken, it switches to full operating mode.
On switching the ignition off it continues working for up to 2 minutes and then shuts itself down
progressively taking a further 1 minute to enter 'Standby'/'Power Save' mode. If however the driver
switched on a consumer with the engine not running, the BSI stays awake for thirty minutes
(Economy Mode).
Anything which interrupts the BSI's shut down operation can cause the problems mentioned in the
above introduction.
This is the reason for the 3 minute Wait time before disconnecting the battery.
Procedure for Battery Disconnection (The 3 minute rule)
1. Whenever a vehicle battery has to be disconnected, switch off all equipment interior lights etc.
close the doors leaving the driver's window down.
2. Switch off the ignition and remove the key and any diagnostic equipment if connected.
3. Wait 3-minutes before disconnecting the battery.
The BSI must be allowed to go to sleep i.e into 'Power Save' mode. Do not operate any equipment on
the vehicle during this time. Remember, even opening the bonnet will wake up the BSI on the vehicle
fitted with an alarm.
Procedure for Battery Reconnection
Ensure that the procedure for battery disconnection has been adhered to and importantly all BSI
functions were switched off with the driver's window left down.
1. Close all doors on the vehicle.
2. Remove the ignition key if left in the ignition.
3. Reconnect the battery.
4. Wait 10 seconds.
5. Switch on the headlights through the driver's window. You will hear a 'Bong'.
6. Switch on the ignition then start the vehicle and check systems are functioning correctly.
71
Renault
Introduction
The Renault‟s immobiliser system use a security code to access the Key programming procedures.
Depending on the system this could be either 4, 8 or 12 digit security code and some vehicles may
use an alpha-numeric security coding system. The security code can normally be found at the front of
the service book, but failing this, the local Renault main dealer will supply you with this information for
a nominal fee.
All vehicles are fitted with a immobiliser LED system display light that indicates the status of the
security system.
There is a maximum number of keys that are able to be programmed to the vehicle, but this is
dependant on the immobiliser system, but in general it varies between four and eight keys.
Early Megane and Megane Scenic‟s with a IR Central locking has a Manual Process for Programming
Keys
Note. Not all keys need to be present as programming a key is adding that key to the system.
72
Program Keys Software Flow chart
Clio 1, Kangoo 1, Laguna 1, Master 1
INITIALISING
PLEASE WAIT...
INSERT KEY PLEASE WAIT...

WITH IGNITION ON
<OK> 30 SECONDS
ONLY THE KEY IN THE INITIALISING

IGNITION WILL BE PLEASE WAIT...
PROGRAMMED
<OK>
SWITCH IGNITION OFF SWITCH IGNITION ON

<OK> <OK>
SWITCH IGNITION ON SWITCH IGNITION OFF

<OK> <OK>
ENTER PIN CODE: KEY PROGRAMMED

0000 SUCCESSFULLY <OK>
<OK> <ESC>
SWITCH IGNITION OFF

<OK>
Note. There is no checking facility on the vehicle’s immobiliser system to verify that the security code
is correct. Please ensure you have entered the correct security code for the vehicle.
73
Clio 2, Espace, Kangoo 2, Laguna 2, Master 2, Traffic 2
INITIALISING
PLEASE WAIT...
ENTER NUMBER OF
KEYS TO PROGRAM:
ENTER PIN CODE: FAILED TO

000000000000 PROGRAM KEY <OK>
<OK> <ESC>
SWITCH IGNITION OFF

<OK>
INITIALISING
PLEASE WAIT...
INSERT FIRST KEY &

TURN IGNITION ON
PROGRAMMING NEW KEY FAILED TO

PLEASE WAIT... PROGRAM KEY <OK>
INITIALISING
PLEASE WAIT...
KEY PROGRAMMED
SUCCESSFULLY <OK>
74
Megane 1, Scenic 1
INITIALISING
PLEASE WAIT...
ENTER NUMBER OF
KEYS TO PROGRAM:
ENTER PIN CODE:

00000000
<OK> <ESC>
SWITCH IGNITION OFF

<OK>
SWITCH IGNITION ON
<OK>
PROGRAMMING KEY
PLEASE WAIT...
REMOVE CURRENT KEY. KEY CODING FAILED

INSERT NEXT KEY AND <OK>
SWITCH IGNITION ON
<OK>
KEY PROGRAMMED
SUCCESSFULLY <OK>
75
Program Keys Manual Process
Megane 1, Scenic 1
1) Switch on the ignition
2) Press hold the central locking button on the dash, Immobiliser led starts to blink slowly
3) Count the blinks to enter the unlock code number, after the required number of blinks has
been counted,
that represent the individual number, make a short pause, then enter the next
4) Once the 4th number has been entered, the immobiliser LED will stay on for a few
seconds, then go off, turn the ignition off, then press and hold the central locking button, the
doors will lock and then unlock and the LED will stay on for a few seconds, during this time
aim the plip key at the sensor and keep pressing until the doors lock and then unlock again.
The car should have now programmed the key code.
5) Press and hold the central locking button to complete programming (doors will lock and
then unlock).
If you have no central locking button on the dash/centre consol, follow the above procedure
but use the accelerator pedal, to start the sequence, and after each number has been input,
press the button on the end of the wiper stalk
76
Twingo 95 on 19 93-96
Clio 94-97 21 92-95
Extra 95-02 Laguna 94-00
Rapid 95-02 Safrane 93-01
Express 95-02 Espace 95-01
Kangoo 97 on Trafic (petrol) 95-02
Scenic 96-01 Master 97-02
correctly.
Renault key fobs are usually fitted with a serial number which is located under the cover inside the
key fob and can be viewed after removing fixing screw.
Note. Only key fobs fitted with an 8 character serial number can be programmed manually. Key fobs
with a 5 character serial number – do not require programming.
All other variations on the number of characters used for the serial numbers require diagnostic
equipment to program the key fobs.
Ensure the ignition switch is “OFF”

Press and hold in the central locking button inside the vehicle for a minimum of 5 seconds
Vehicle doors should “Lock” and then “Unlock”
Within the next 10 to 15 seconds:
o On the first key fob: Press the “Lock / Unlock” button twice (can be once on some
models)
Typical Renault key fob
o On the second key fob: Press the “Lock / Unlock” button twice (can be once on some
models)
Key fobs are re-programmed.
77
Clio II 98 on
Re-initialising Procedure – Radio frequency key fobs only
Note. If key fob buttons are operated repeatedly whilst vehicle is out of range and central locking /
alarm system becomes inoperative, carry out the following re-initialising procedure.
Ensure the ignition switch is “OFF”

Press and hold in the central locking button inside the vehicle for a minimum of 5 seconds
Immobiliser LED illuminates
Press the “Lock / Unlock” button on the key fob
Immobiliser LED turns “OFF”

Key fob is re-programmed.
Repeat above procedure for the second key fob
correctly.
Replacement key fobs can only be programmed using diagnostic equipment

Refer to the iKEYS software for further information.
Megane 95-01
Re-initialising Procedure – Radio frequency key fobs only
alarm system becomes inoperative, carry out the following re-initialising procedure.
Press and hold the “Lock / Unlock” button on the key fob for more than 10 seconds.
The red LED should extinguish.

78
Point the remote at the car and press the “Lock / Unlock” button on the key fob 3 times.
Confirm the remote locks and unlocks the central locking system
correctly.
Replacement key fobs can only be programmed using diagnostic equipment

Refer to the iKEYS software for further information.
79
Rover
Introduction
The method in which the Rover key programming is performed on these vehicles is slightly different,
as it is the remote key fob (also known as the PLIP) that is programmed and not the actual key itself.
The PLIP is used to arm or disarm the alarm on the vehicle (depending on the system fitted) and also
activate the vehicle‟s central locking system.
The coverage for these vehicles is dependant on the iKEYS software ability to extract the randomly
generated Emergency Key Access code (EKA) that is used to enable and disable the immobiliser /
alarm system. This is useful to permanently disable the immobiliser/alarm for a length of time.
After 3 failed attempts the system will not let you attempt this procedure again for 10 minutes (30
minutes for Land Rover).
The other function on the iKEYS software enables you to program a new PLIP to the vehicle.
This is useful when the original PLIP has been broken or lost.
Immobiliser Matching – 5AS

This function is for matching a replacement Immobiliser unit to the Engine ECU, The Plips must first
be coded to the 5AS unit, and then the immobiliser can then be matched to the Engine ECU.
Pektron BCU
The Immobiliser must be disabled before communication can be made with the Pektron ECU.
Any remote not present will be erased. Please Record the EKA as failing to program any remotes
may result in the vehicle being immobilised and the only way to disable the immobiliser is with the
EKA code. Only Existing remotes and „New‟ remotes supplied with the 22 digit barcode can be
programmed (remove first and last digit of code when prompted).
80
Read EKA Code flow chart
EKA - EMERGENCY KEY

ACCESS CODE. THIS
FUNCTION ENABLES AN
OVERRIDE OF THE
IMMOBILISER SYSTEM IF
THE PLIP IS DAMAGED
OR LOST. THIS ALLOWS
THE VEHICLE TO BE
USED WHILE A NEW PLIP
IS OBTAINED. ENTER
THE CODE BY TURNING
THE KEY IN THE
DRIVERS SIDE DOOR.
INITIALISING
PLEASE WAIT...
READING EMERGENCY KEY

ACCESS CODE...
(EKA)
PLEASE WAIT....
TURN KEY TO POSITION

FOR THE FOLLOWING
UNLOCK 1, LOCK 2,
UNLOCK 3, LOCK 4.
1. Insert the ignition key into the drivers side door lock.
2. Turn and hold the key clockwise to the locking position (the doors will lock) for at least 5
seconds.
3. Return the key to a central upright position.
4. Enter the First Digit - Turn the key fully, anticlockwise to the unlock position (the doors will
unlock) then back to the central position. This should be done the amount of times as the first digit of
the EKA Code.
5. Enter the second digit - Turn the key fully, clockwise to the lock position then back to the
central position for the number of times of the second digit of the EKA Code.
6. Enter the third digit - Turn the key fully, anticlockwise to the unlock position then back to the
central position. This should be done the amount of times as the third digit of the EKA Code.
7. Enter the fourth digit - Turn the key fully, clockwise to the lock position again then back to the
central position. This should be done the amount of times as the fourth digit of the EKA Code.
8. Once this has been completed turn the key to the unlock position then back to the central
position once.
If the code has been entered correctly, open the door and the red flashing LED light on the dashboard
will stop. You will now be able to start the vehicle.
81
5AS Program Remote flow chart
INFO - PRESS REMOTE

CONTROL 'LOCK' BUTTON
8 TIMES IN SUCCESSION
THEN WAIT FOR VEHICLE
TO BEEP. STAY IN THIS
MODE AND REPEAT
PROCEDURE FOR ANY
OTHER REMOTES
CONTROLS (UP TO 4
MAX). PRESS <OK> TO
CONTINUE OR <ESC> TO
EXIT
ENTERING PROGRAMMING
MODE... PLEASE WAIT!
PROGRAMMING NOW!!!
(PRESS EACH REMOTE 8
TIMES etc). PRESS
<OK> WHEN COMPLETE.
SAVING DATA...
PLEASE WAIT!
PROGRAMMING
COMPLETE!
82
Pektron Program Remote flow chart
INITIALISING
PLEASE WAIT...
ONLY EXISTING WORKING

PLIPS OR NEW PLIPS
WITH A 20 DIGIT CODE
CAN BE PROGRAMMED
(REMOVE FIRST AND
LAST DIGIT OF
BARCODE).
PLEASE WRITE DOWN THE
FOLLOWING EKA CODE
TURN KEY TO POSITION

FOR THE FOLLOWING
UNLOCK ?, LOCK ?,
UNLOCK ?, LOCK ?.
ARE YOU SURE YOU WANT Select No if you only require

TO CONTINUE? the EKA code and do not want
1) NO to code a remote
2) YES <OK>
PRESS 'LOCK' BUTTON

ON EXISTING PLIPS
UNTIL VEHICLE BEEPS,
REPEAT FOR EACH
EXISTING PLIP. PRESS
<OK> TO CONTINUE OR
<ESC> TO EXIT
ENTER NUMBER OF
NEW PLIPS:
1
Repeat for all ENTER PLIP BARCODE

new fobs
*********************
PROGRAMMING
COMPLETE!
83
Immobiliser matching flow chart
5AS Immobiliser fitted to Mems 2J & Mems 3 Engine systems.
INITIALISING
PLEASE WAIT...
MATCHING IMMOBILISER FAILED TO MATCH

TO ENGINE ECU... IMMOBILISER TOO
ENGINE ECU. <OK>
IMMOBILISER MATCHED
TO ENGINE ECU.
<OK>
84
Manually “Unlock” the vehicle using the key

Ensure all of the doors, Bonnet and Boot are all closed and both front doors are unlocked.
Hold the remote key fob close to the vehicle
Press the “Padlock” or “Dimpled” button on the key fob button 4 times or more in quick
succession, until the vehicle locks are enabled.

3AS Manual Coding

Manual procedure for Programming 3AS Plips
* The system must be disabled, Switch ignition on the off within 3 seconds
* Open the boot and leave it open
* Switch ignition on the off within 3 seconds
* The Horn Should beep and Alarm LED should come on it indicate that
you have entered programming mode
* Press the button on Each Plip you wish to program, the Alarm LED
should flash to indicate a success for each plip.
* Once all Plips have been programmed switch The Ignition on to
complete this process
85
SAAB
Introduction
No security pin is required; However a Programmed key is required to start the programming process.
Remotes are Programmed Diagnostically.
.
Note. All keys need to be present; any key not present will be erased from the system.
86
SAAB Software flow chart
NOTE –
ENSURE ALL KEYS ARE
PRESENT, ANY KEY NOT
PRESENT WILL BE
DISABLED.
ENTER NUMBER OF
KEYS TO PROGRAM:
INSERT A PROGRAMMED
KEY INTO THE IGNITION
<OK>
PROGRAMMING KEY KEY CODING FAILED

PLEASE WAIT... Fail <OK>
Loop for Number DOES THIS KEY HAVE A

of keys REMOTE?
NO
YES
PRESS THE UNLOCK “Fasten Seatbelt” Light Will

BUTTON ON THE REMOTE Flash once to show
ONCE PER SECOND. 10
success.
TIMES <OK>
REMOVE CURRENT KEY.

INSERT NEXT KEY AND
SWITCH IGNITION ON
<OK>
PROGRAMMING COMPLETE!
87
Subaru
Introduction
There are 2 different systems fitted to these vehicles. In general Immobiliser 1 systems are fitted to
vehicles that are older than Model Year 2000 and immobiliser 2 fitted to post 2000 vehicles.
88
Subaru Software flow chart
ENTER NUMBER OF
KEYS TO PROGRAM:
SWITCH IGNITION OFF

<OK>
SWITCH IGNITION ON
THEN PRESS <OK>
INITIALISING
PLEASE WAIT...
PLEASE WAIT...
[ ]
ERASING KEY REMOVE CURRENT KEY.

PLEASE WAIT... INSERT NEXT KEY
[ ] AND SWITCH IGNITION
ON <OK>
PROGRAMMING KEY PROGRAMMING KEY

PLEASE WAIT... PLEASE WAIT...
[ ] [ ]
KEY PROGRAMMED KEY PROGRAMMED

SUCCESSFULLY <OK> SUCCESSFULLY <OK>
89
Impreza 01 on
Forester 98-02
Legacy 99-03
Legacy Outback 00 on
alarm system becomes inoperative or a replacement key fob is obtained. The following programming
procedure is required to be carried out before the key fob will operate correctly.
If using the following manual key programming procedure: all the existing key fobs must be present,
as the manual programming procedure will overwrite the existing key fobs, and make them
inoperatable for the vehicle.
Remove driver‟s side kick trim panel

Connect central locking registration harness plug (white) connectors together (black wire and
black/blue wires)
Manually “Unlock” the vehicle using the key
Press the “Unlock” button and then the “Lock” on the key fob
The vehicle should “Unlock” and “Lock” as the key fob buttons are pressed to confirm
programming of key fob
After the last key fob has been programmed, disconnect the central locking registration
harness plug (white) connectors together (black wire and black/blue wires), and refit driver‟s
side kick trim panel
90
Suzuki
Introduction
There are 2 different systems fitted to these vehicles. No security code as required for these systems
91
Program Keys Software flow chart
DOES THE KEY HAVE A

VIRGIN TRANSPONDER?
YES
NO
SWITCH IGNITION OFF UNABLE TO OBTAIN

SECURITY ACCESS.
<OK> <OK>
SWITCH IGNITION ON
<OK>
KEY PROGRAMMED
SUCCESSFULLY <OK>
92
Remote programming is a manual process for all vehicles supported.
Please follow the procedures set out below to ensure accurate programming of the remotes.
Ensure Ignition is switch OFF and all Doors are closed.
Open Driver‟s Door, Switch Ignition “ON”.
Within 10 Seconds – Switch Ignition “OFF” and remove the Key from the Ignition
Within 20 Seconds - Press Drivers door contact switch 3 times
Within 10 Seconds - switch Ignition “ON” then “OFF”, Remove the Key from the Ignition
Within 10 Seconds - Press the unlock button.
Lock
Lock
93
Toyota / Lexus
Introduction
The Toyota immobiliser system works with a “Master” key which is required to gain access to the
immobiliser system. Therefore no security code is required. If the “Master” key is lost then the
immobiliser system ECM will need to be replaced / recoded by the Toyota main Dealer.
The immobiliser system is also time critical, the instructions must be carried out within the specified
time. The handset will display a failure message if this time is exceeded.
94
Program Keys Software flow chart
SWITCH IGNITION OFF

AND REMOVE KEY FROM
IGNITION. <OK>
INITIALISING
PLEASE WAIT…
INSERT BLACK MASTER

KEY, SWITCH IGNITION
ON. PRESS <OK>
120 SECONDS REMAIN.
Fail If time limit
exceeded
THE KEY IN THE REMOVE MASTER KEY REGISTRATION

IGNITION IS NOT FROM IGNITION. FAILURE.
RECOGNISED AS A
MASTER KEY. <OK> PRESS <OK> TIME EXCEEDED. <OK>
If time limit
exceeded
INSERT ‘NEW’ KEY

WITH IGNITION OFF
<OK>
PROGRAMMING KEY KEY CODING FAILED

Fail
PLEASE WAIT…
<OK>
KEY PROGRAMMED
SUCCESSFULLY
<OK>
95
Erase Key Software flow chart
SWITCH IGNITION OFF

AND REMOVE KEY FROM
IGNITION. <OK>
INITIALISING
PLEASE WAIT…
INSERT BLACK MASTER If time limit

KEY, SWITCH IGNITION exceeded
ON. PRESS <OK>

120 SECONDS REMAIN.
REGISTRATION
Fail
FAILURE.
TIME EXCEEDED. <OK>

THE KEY IN THE REMOVE MASTER KEY
IGNITION IS NOT FROM IGNITION.
RECOGNISED AS A
MASTER KEY. <OK> PRESS <OK> If time limit
exceeded
Fail
ALL SLAVE UNABLE TO ERASE

TRANSPONDERS ERASED TRANSPONER(S).
<OK> <OK>
96
Remote programming is a manual process for all vehicles supported.

Please follow the procedures set out below to ensure accurate programming of the remotes.
Please ensure the following has been carried out before starting:
All Doors are closed

Start the vehicle and then stop the vehicle.
Remove key from the ignition switch.
Open the Drivers door and ensure it is unlocked.
Insert key in the ignition for 2 seconds and then remove.

Within 40 seconds: Close the driver‟s door for 2 seconds and then open.
Wait 2 seconds: Close the driver‟s door for 2 seconds and then open
Insert key in the ignition for 2 seconds and then remove.
Within 40 seconds: Close the driver‟s door for 2 seconds and then open
Wait 2 seconds: Close the driver‟s door for 2 seconds and then open
Close Drivers Door.
To Program an additional remote whilst retaining all other remotes programmed.
Insert Key in the ignition switch and wait 2 seconds

Switch ignition on for 2 seconds and then turn off.
Remove key
System should lock and unlock once.
Note: Please start the following procedure within the next 20 seconds.
For Vehicle manufactured in Japan: Simultaneously hold the LOCK and UNLOCK buttons on the
remote for 1-1.5 seconds and then release.
For Vehicles not manufactured Japan: Press the LOCK button on the remote for a minimum of 1
second and then release.
Within 3 seconds press the lock button for 1 second and then release.
To Program an additional remote and remove all other remotes programmed.
Insert Key in the ignition switch and wait 2 seconds

Remove key
System should lock and unlock twice.
Note: Please start the following procedure within the next 20 seconds.
For Vehicles manufactured in Japan: Simultaneously hold the LOCK and UNLOCK buttons on the
remote for 1-1.5 seconds and then release.
For Vehicles not manufactured in Japan: Press the LOCK button on the remote for a minimum of 1
second and then release.
Within 3 seconds press the lock button for 1 second and then release.
If system locks and unlocks twice then the procedure has not been completed.
To Exit Programming mode open driver‟s door.
97
Applications
List
98

MINI SUPP
SD24.0
ALFA ROMEO KEYCODING KEYS
147 All Variants P/D All 05-09 All CAN Immobiliser 30220300 SD20.1
159 All Variants P/D All 06-09 All CAN Immobiliser 30220300 SD20.1
BRERA All Variants P/D All 05-09 All CAN Immobiliser 30220300 SD20.1
GT All Variants P/D All 04-09 All CAN Immobiliser 30220300 SD20.1
Audi KEYCODING KEYS

A2 P/D All 00-07 Immo 1 30220300 SD16.3
A2 P/D All 00-07 Immo 2 30220300 SD16.3
A3 P/D All 04-07 CAN Keys 30220300 SD16.3
A3 P/D All 04-07 CAN Remote 30220300 SD16.3
A3 P/D All 95-03 Immo 1 30220300 SD16.3
A3 P/D All 95-03 Immo 2 30220300 SD16.3
A4 P/D All 95-03 Immo 1 30220300 SD16.3
A4 P/D All 95-03 Immo 2 30220300 SD16.3
A6 P/D All 96-03 Immo 1 30220300 SD16.3
A6 P/D All 96-03 Immo 2 30220300 SD16.3
A8 P/D All 96-03 Immo 1 30220300 SD16.3
A8 P/D All 96-03 Immo 2 30220300 SD16.3
Q7 P/D 07- CAN Keys 30220300 SD16.3
Q7 P/D 07- CAN Remote 30220300 SD16.3
S3 P/D All 04-07 CAN Keys 30220300 SD16.3
S3 P/D All 04-07 CAN Remote 30220300 SD16.3
S3 P/D All 95-03 Immo 1 30220300 SD16.3
S3 P/D All 95-03 Immo 2 30220300 SD16.3
S4 P/D All 95-03 Immo 1 30220300 SD16.3
S4 P/D All 95-03 Immo 2 30220300 SD16.3
TT P/D All 98-03 Immo 1 30220300 SD16.3
TT P/D All 98-03 Immo 2 30220300 SD16.3
Audi PIN EXTRACTION

A2 P/D All 00-07 MOTOMETER DASH 30220300 SD16.3
A2 P/D All 00-07 VDO DASH 30220300 SD24.0
A2 P/D All 00-07 EMS 30220300 SD16.3
A3 P/D All 95-03 EMS 30220300 SD16.3
A4 P/D All 95-03 EMS 30220300 SD16.3
A6 P/D All 96-03 EMS 30220300 SD16.3
A8 P/D All 96-03 EMS 30220300 SD16.3
S3 P/D All 95-03 MOTOMETER DASH 30220300 SD16.3
S3 P/D All 95-03 VDO DASH 30220300 SD24.0
S3 P/D All 95-03 EMS 30220300 SD16.3
S4 P/D All 95-03 MOTOMETER DASH 30220300 SD16.3
S4 P/D All 95-03 VDO DASH 30220300 SD24.0
S4 P/D All 95-03 EMS 30220300 SD16.3
TT P/D All 98-03 MOTOMETER DASH 30220300 SD16.3
TT P/D All 98-03 VDO DASH 30220300 SD24.0
TT P/D All 98-03 EMS 30220300 SD16.3
Citroen KEYCODING KEYS

BERLINGO P/D All BSI 2 30220300 SD18.0
BERLINGO P/D All BSI 3 30220300 SD18.0
BERLINGO P/D All Immo 1 30220300 SD16.3
BERLINGO P/D All CPH 30220300 SD21.1
C2 P/D All BSI 2 30220300 SD16.3
C3 P/D All CAN BSI 30220300 SD16.3
C3 P/D All BSI 2 30220300 SD18.0
C5 P/D All BSI 2 30220300 SD18.0
C8 P/D All BSI 2 30220300 SD16.3
DISPATCH P/D All Immo 1 30220300 SD16.3
DISPATCH P/D All CPH 30220300 SD21.1
EVASION P/D All CPH 30220300 SD21.1
SAXO P/D All Immo 1 30220300 SD16.3
SYNERGIE P/D All CPH 30220300 SD21.1
XANTIA P/D All Immo 1 30220300 SD16.3
XANTIA P/D All CPH 30220300 SD21.1
XSARA P/D All BSI 3 30220300 SD18.0
XSARA P/D All CPH 30220300 SD21.1
XSARA PICASSO P/D All BSI 2 30220300 SD16.3
XSARA PICASSO P/D All BSI 3 30220300 SD16.3
Daewoo KEYCODING KEYS

KALOS P/D All Immobiliser 30220300 SD16.3
LACETTI P/D All Immobiliser 30220300 SD16.3
LANOS P/D All Immobiliser 30220300 SD16.3
MATIZ P/D All ECU Matching 30220300 SD16.3
MATIZ P/D All Immobiliser 30220300 SD16.3
NUBIRA III P/D All Immobiliser 30220300 SD16.3
TACUMA P/D All Immobiliser 30220300 SD16.3
FIAT KEYCODING KEYS

BRAVO All Variants P/D All 07-09 All CAN Immobiliser 30220300 SD20.1
CROMA All Variants P/D All 05-09 All CAN Immobiliser 30220300 SD20.1
DOBLO All Variants P/D All 05-09 All CAN Immobiliser 30220300 SD20.1
DUCATO All Variants P/D All 06-09 All CAN Immobiliser 30220300 SD20.1
IDEA All Variants P/D All 04-09 All CAN Immobiliser 30220300 SD20.1
LINEA All Variants P/D All 07-09 All CAN Immobiliser 30220300 SD20.1
PALIO RST All Variants P/D All 07-09 All CAN Immobiliser 30220300 SD20.1
MINI SUPP
SD24.0
FIAT KEYCODING KEYS
PANDA All Variants P/D All 03-09 All CAN Immobiliser 30220300 SD20.1
PERLA All Variants P/D All 07-09 All CAN Immobiliser 30220300 SD20.1
PUNTO All Variants P/D All 03-09 All CAN Immobiliser 30220300 SD20.1
PUNTO All Variants P/D All 99-03 All CAN Immobiliser 30220300 SD20.1
PUNTO LA All Variants P/D All All CAN Immobiliser 30220300 SD20.1
SEDICI All Variants P/D All 06-09 All CAN Immobiliser 30220300 SD20.1
STILO All Variants P/D All 04-06 All CAN Immobiliser 30220300 SD20.1
Ford KEYCODING KEYS

COUGAR P All 98-99 PATS 3 30220300 SD18.0
COURIER P All 96-02 PATS 3 30220300 SD18.0
COURIER D All 96-02 PATS 3 30220300 SD18.0
COURIER P All 93-96 PATS 1 COURIER 30220300 SD16.3
COURIER D All 93-96 PATS 1 COURIER 30220300 SD16.3
ESCORT P All 97-01 PATS 2 PETROL 30220300 SD16.3
ESCORT P All 93-97 PATS 1 ESCORT 30220300 SD16.3
ESCORT D All 97-01 PATS 2 DIESEL 30220300 SD16.3
ESCORT D All 93-97 PATS 1 ESCORT 30220300 SD16.3
FIESTA P All 96-02 PATS 3 30220300 SD18.0
FIESTA D All 96-02 PATS 3 30220300 SD18.0
FIESTA P All 96-97 PATS 2 PETROL 30220300 SD16.3
FIESTA D All 93-96 PATS 1 30220300 SD16.3
FIESTA D All 96-97 PATS 2 DIESEL 30220300 SD16.3
FIESTA P All 93-96 PATS 1 30220300 SD16.3
FIESTA P All 02-07 PATS 3 CAN 30220300 SD22.3
FIESTA D All 02-07 PATS 3 CAN 30220300 SD22.3
FIESTA P All 08-11 PATS CAN IPC 30220300 SD23.1
FIESTA D All 08-11 PATS CAN IPC 30220300 SD23.1
FOCUS P All 98-05 PATS 3 30220300 SD18.0
FOCUS D All 98-05 PATS 3 30220300 SD18.0
FOCUS P All 05-11 PATS CAN IC 30220300 SD23.0
FOCUS D All 05-11 PATS CAN IC 30220300 SD23.0
FUSION P All 02-07 PATS 3 CAN 30220300 SD22.3
FUSION D All 02-07 PATS 3 CAN 30220300 SD22.3
GALAXY P All 00-06 PATS 3 SCP 30220300 SD16.3
GALAXY P All PATS 1 30220300 SD16.3
GALAXY D All 95-96 PATS 1 30220300 SD16.3
GALAXY P All VAG Timed Access 30220300 SD16.3
GALAXY D All VAG Timed Access 30220300 SD16.3
GALAXY D All 00-06 PATS 3 SCP 30220300 SD16.3
GALAXY P All 06-11 PATS CAN BCMii 30220300 SD23.2
GALAXY D All 06-11 PATS CAN BCMii 30220300 SD23.2
KA P 1.3 00-05 PATS 3 30220300 SD18.0
KA P 1.3 96-01 PATS 3 30220300 SD18.0
KA P 1.3 96-97 PATS 2 PETROL 30220300 SD16.3
KA P 1.3 05-08 PATS 3 CAN 30220300 SD22.4
MONDEO P All 94-96 PATS 1 30220300 SD16.3
MONDEO P All 96-97 PATS 2 PETROL 30220300 SD16.3
MONDEO D All 96-97 PATS 2 DIESEL 30220300 SD16.3
MONDEO P All 00-06 PATS 3 30220300 SD18.0
MONDEO D All 00-06 PATS 3 30220300 SD18.0
ORION P All 93-97 PATS 1 30220300 SD16.3
ORION D All 93-97 PATS 1 30220300 SD16.3
PUMA P All 97-02 PATS 3 30220300 SD18.0
SCORPIO Petrol V6/12V P All PATS 1 30220300 SD16.3
SCORPIO D All 95-96 PATS 1 30220300 SD16.3
S-MAX P All 06-11 PATS CAN BCMii 30220300 SD23.2
S-MAX D All 06-11 PATS CAN BCMii 30220300 SD23.2
TRANSIT P All 97-05 PATS 3 30220300 SD18.0
TRANSIT D All 97-05 PATS 3 30220300 SD18.0
TRANSIT P All 95-97 PATS 1 30220300 SD18.0
TRANSIT D All 95-97 PATS 1 30220300 SD18.0
GM-Opel KEYCODING KEYS

AGILA P/D All Immo1 30220300 SD16.3
AGILA P/D All Remote 30220300 SD16.3
ARENA P/D All Immo1 30220300 SD16.3
ARENA P/D All Remote 30220300 SD16.3
ASTRA-F P/D All 96-01 Immo1 30220300 SD16.3
ASTRA-F P/D All 96-01 Remote 30220300 SD16.3
ASTRA-G P/D All 98-05 Immo2 30220300 SD16.3
ASTRA-G P/D All 98-05 Remote 30220300 SD16.3
ASTRA-H P/D All 04-06 Immo3 (CAN) 30220300 SD16.3
CALIBRA P/D All 95-97 Immo1 30220300 SD16.3
CALIBRA P/D All 95-97 Remote 30220300 SD16.3
CAVALIER P/D All 96-01 Immo1 30220300 SD16.3
CAVALIER P/D All 96-01 Remote 30220300 SD16.3
CORSA-B P/D All 96-01 Immo1 30220300 SD16.3
CORSA-B P/D All 96-01 Remote 30220300 SD16.3
CORSA-C P/D All Immo2 30220300 SD16.3
CORSA-C P/D All Remote 30220300 SD16.3
CORSA-C COMBO P/D All 01-08 Immo2 30220300 SD16.3
CORSA-C COMBO P/D All 01-08 Remote 30220300 SD16.3
CORSA-D P/D All 06-10 Immo 4 (CAN) 30220300 SD21.2
FRONTERA-A P/D All -98 Immo1 30220300 SD16.3
FRONTERA-A P/D All -98 Remote 30220300 SD16.3
FRONTERA-B P/D All 98- Immo2 30220300 SD16.3
FRONTERA-B P/D All 98- Remote 30220300 SD16.3
MERIVA P/D All Immo2 30220300 SD16.3
MERIVA P/D All Remote 30220300 SD16.3
MONTEREY P/D All 96-97 Immo1 30220300 SD16.3
MONTEREY P/D All 98- Immo2 30220300 SD16.3
MONTEREY P/D All 96-01 Remote 30220300 SD16.3
OMEGA-B P/D All 96-01 Immo1 30220300 SD16.3
OMEGA-B P/D All 00-02 Immo2 30220300 SD16.3
OMEGA-B P/D All 96-02 Remote 30220300 SD16.3
TIGRA P/D All 95-00 Immo1 30220300 SD16.3
TIGRA P/D All 95-00 Remote 30220300 SD16.3
MINI SUPP
SD24.0
GM-Opel KEYCODING KEYS
VECTRA-B P/D All 96-01 Immo1 30220300 SD16.3
VECTRA-B P/D All 96-01 Remote 30220300 SD16.3
VECTRA-B P/D All 00-02 Immo2 30220300 SD16.3
VECTRA-B P/D All 00-02 Remote 30220300 SD16.3
VECTRA-C P/D All 02-06 Immo3 (CAN) 30220300 SD16.3
VX220 P/D All Immo2 30220300 SD16.3
VX220 P/D All Remote 30220300 SD16.3
ZAFIRA P/D All 99-05 Immo2 30220300 SD16.3
ZAFIRA P/D All 99-04 Remote 30220300 SD16.3
ZAFIRA-B P/D All 05-06 Immo3 (CAN) 30220300 SD16.3
Honda KEYCODING KEYS

ACCORD P/D All 97-03 Immobiliser 30220300 SD16.3
CIVIC P/D All 00-05 Immobiliser 30220300 SD18.0
CR-V P/D All 01-06 Immobiliser 30220300 SD16.3
HR-V P/D All 99-05 Immobiliser 30220300 SD16.3
JAZZ P/D All 02-06 Immobiliser 30220300 SD18.0
S2000 P/D All 00-03 Immobiliser 30220300 SD16.3
LANCIA KEYCODING KEYS

MUSA All Variants P/D All 04-09 All CAN Immobiliser 30220300 SD20.1
THESIS All Variants P/D All 04-09 All CAN Immobiliser 30220300 SD20.1
YPSILON All Variants P/D All 04-06 All CAN Immobiliser 30220300 SD20.1
LandRover KEYCODING KEYS

DISCOVERY III P/D All 05-08 Immobiliser 30220300 SD16.3
FREELANDER P/D All 97-00 CCU 30220300 SD19.3
RANGE ROVER SPORT P/D All 05-08 Immobiliser 30220300 SD16.3
Lexus KEYCODING KEYS

IS200 P/D All 01-04 Immobiliser 30220300 SD16.3
IS300 P/D All 01-04 Immobiliser 30220300 SD16.3
Mitsubishi KEYCODING KEYS

3000 GT P/D All 98-99 Immobiliser 30220300 SD16.3
CARISMA P/D All 99-04 Immobiliser 30220300 SD16.3
COLT P/D All 96-03 Immobiliser 30220300 SD16.3
COLT P/D All 04-10 Immobiliser 30220300 SD21.0
EVO P/D All 00-02 Immobiliser 30220300 SD16.3
GALANT P/D All 00-03 Immobiliser 30220300 SD16.3
GALANT P/D All 04 - Immobiliser 30220300 SD16.3
GALANT WAGON P/D All 97-03 Immobiliser 30220300 SD16.3
L200 P/D All 05-08 Immobiliser 30220300 SD16.3
LANCER P/D All 99-01 Immobiliser 30220300 SD16.3
LANCER P/D All 96-99 Immobiliser 30220300 SD16.3
LANCER WAGON P/D All 99-01 Immobiliser 30220300 SD16.3
OUTLANDER P/D All 04-07 Immobiliser 30220300 SD16.3
PININ P/D All 00-05 Immobiliser 30220300 SD16.3
SHOGUN P/D All 00-02 Immobiliser 30220300 SD16.3
SHOGUN P/D All 97-00 Immobiliser 30220300 SD16.3
SHOGUN SPORT P/D All 98-05 Immobiliser 30220300 SD16.3
SIGMA P/D All 95-97 Immobiliser 30220300 SD16.3
SPACESTAR P/D All 99-05 Immobiliser 30220300 SD16.3
SPACEWAGON P/D All 95-99 Immobiliser 30220300 SD16.3
SPACEWAGON P/D All 99-03 Immobiliser 30220300 SD16.3
Nissan KEYCODING KEYS

ALMERA P/D All 00-06 NATS 5 30220300 SD16.3
MAXIMA P/D All 00-02 NATS 5 30220300 SD16.3
MICRA P/D All 00-03 NATS 5 30220300 SD16.3
PRIMERA P/D All 00-06 NATS 5 30220300 SD16.3
SKYLINE P/D All 99-02 NATS 5 30220300 SD16.3
TERRANO II P/D All 00-06 NATS 5 30220300 SD16.3
X-TRAIL P/D All 01-06 NATS 5 30220300 SD16.3
Peugeot KEYCODING KEYS

106 P/D All Immo 2 30220300 SD16.3
206 P/D All Immo 2 30220300 SD18.0
206 P/D All BSI 2 30220300 SD16.3
206 P/D All Immo1 30220300 SD16.3
206 P/D All Old Bsi 30220300 SD16.3
207 P/D All 06-07 CAN BSI 30220300 SD18.0
306 P/D All Immo 2 30220300 SD18.0
307 P/D All 05-06 CAN BSI 30220300 SD18.0
307 P/D All BSI 2 30220300 SD15.2
406 P/D All CPH 30220300 SD21.1
406 P/D All BSI 1 30220300 SD18.0
406 P/D All BSI 2 30220300 SD18.0
406 P/D All BSI 3 30220300 SD16.3
406 P/D All BSI 4 30220300 SD16.3
407 P/D All 04-07 CAN BSI 30220300 SD18.0
607 P/D All Immo 2 30220300 SD18.0
607 P/D All Immo1 30220300 SD18.0
806 P/D All CPH 30220300 SD21.1
807 P/D All BSI 2 30220300 SD18.0
EXPERT P/D All CPH 30220300 SD21.1
PARTNER P/D All BSI 2 30220300 SD18.0
PARTNER P/D All BSI 3 30220300 SD18.0
PARTNER P/D All CPH 30220300 SD21.1
Renault KEYCODING KEYS

CLIO P/D All Immobiliser 30220300 SD16.3
CLIO II P/D All Immobiliser 30220300 SD16.3
CLIO II PH2 P/D All Immobiliser 30220300 SD16.3
MINI SUPP
SD24.0
Renault KEYCODING KEYS
ESPACE P/D All Immobiliser 30220300 SD16.3
KANGOO P/D All type 1 30220300 SD16.3
KANGOO II P/D All Immobiliser 30220300 SD16.3
LAGUNA I P/D All Immobiliser 30220300 SD16.3
LAGUNA II P/D All Immobiliser 30220300 SD16.3
MASTER 1 P/D All 01- Immo 1 30220300 SD16.3
MASTER II P/D All Immobiliser 30220300 SD16.3
MEGANE P/D All Immo 1 30220300 SD16.3
SCENIC P/D All Immo 1 30220300 SD16.3
TRAFIC II P/D All Immobiliser 30220300 SD16.3
Rover-MG IMMOBILISER MATCH

100 SERIES 111 P 1.1 91-95 11K2D Mems 1.6 MPi Turbo 30211600 SD21.3
100 SERIES 111 P 1.1 91-95 11K2D Mems 1.6 SPi CAT 30211600 SD21.3
100 SERIES 111 P 1.1 91-95 11K2D Mems 1.6 SPi NON-CAT 30211600 SD21.3
100 SERIES 111 P 1.1 91-95 11K2D Mems 1.6 STAND.Mpi 30211600 SD21.3
100 SERIES 111 P 1.1 95-98 K8-1.1 Mems 1.9 30220300 SD21.3
100 SERIES 114 P 1.4 90-94 K16-1.4 Mems 1.6 MPi Turbo 30211600 SD21.3
100 SERIES 114 P 1.4 91-95 14K2A Mems 1.6 MPi Turbo 30211600 SD21.3
100 SERIES 114 P 1.4 90-94 K16-1.4 Mems 1.6 SPi CAT 30211600 SD21.3
100 SERIES 114 P 1.4 91-95 14K2A Mems 1.6 SPi CAT 30211600 SD21.3
100 SERIES 114 P 1.4 90-94 K16-1.4 Mems 1.6 SPi NON-CAT 30211600 SD21.3
100 SERIES 114 P 1.4 91-95 14K2A Mems 1.6 SPi NON-CAT 30211600 SD21.3
100 SERIES 114 P 1.4 90-94 K16-1.4 Mems 1.6 STAND.Mpi 30211600 SD21.3
100 SERIES 114 P 1.4 91-95 14K2A Mems 1.6 STAND.Mpi 30211600 SD21.3
100 SERIES 114 P 1.4 90-93 14K4C/D Mems 1.6 MPi Turbo 30220300 SD21.3
100 SERIES 114 P 1.4 91-95 14K4F Mems 1.6 MPi Turbo 30220300 SD21.3
100 SERIES 114 P 1.4 90-93 14K4C/D Mems 1.6 SPi CAT 30220300 SD21.3
100 SERIES 114 P 1.4 91-95 14K4F Mems 1.6 SPi CAT 30220300 SD21.3
100 SERIES 114 P 1.4 90-93 14K4C/D Mems 1.6 SPi NON-CAT 30220300 SD21.3
100 SERIES 114 P 1.4 91-95 14K4F Mems 1.6 SPi NON-CAT 30220300 SD21.3
100 SERIES 114 P 1.4 90-93 14K4C/D Mems 1.6 STAND.Mpi 30220300 SD21.3
100 SERIES 114 P 1.4 91-95 14K4F Mems 1.6 STAND.Mpi 30220300 SD21.3
100 SERIES 114 P 1.4 95-99 K8-1.4 Mems 1.9 30220300 SD21.3
200 SERIES 200 vi P/D All 95-99 Mems 2J 30220300 CD1
200 SERIES 214 P 1.4 90-92 14KC/D Mems 1.6 MPi Turbo 30220300 SD21.3
200 SERIES 214 P 1.4 90-92 14KC/D Mems 1.6 SPi CAT 30220300 SD21.3
200 SERIES 214 P 1.4 90-92 14KC/D Mems 1.6 SPi NON-CAT 30220300 SD21.3
200 SERIES 214 P 1.4 90-92 14KC/D Mems 1.6 STAND.Mpi 30220300 SD21.3
200 SERIES 214 P 1.4 95-99 14K16 Mems 1.9 30220300 SD21.3
200 SERIES 214 P 1.4 95-99 14K8 Mems 1.9 30220300 SD21.3
200 SERIES 216 P 1.6 95-99 16K16 Mems 1.9 30220300 SD21.3
200 SERIES 218 P 1.8 97-99 18K16 Mems 1.9 30220300 SD21.3
200 SERIES 218 Coupe P/D All 96-99 Mems 2J 30220300 CD1
200 SERIES 220 Coupe P 2.0 92-96 20T4 Mems 1.6 MONT.MPi 30211600 SD21.3
200 SERIES 220 Coupe P 2.0 92-96 20T4 Mems 1.6 MPi Turbo 30211600 SD21.3
200 SERIES 220 Coupe P 2.0 92-96 20T4 Mems 1.6 SPi CAT 30211600 SD21.3
200 SERIES 220 Coupe P 2.0 92-96 20T4 Mems 1.6 SPi NON-CAT 30211600 SD21.3
200 SERIES 220 Coupe P 2.0 92-96 20T4 Mems 1.6 STAND.Mpi 30211600 SD21.3
200 SERIES 220 GTI P 2.0 91-92 20M4 Mems 1.6 MONT.MPi 30220300 SD21.3
200 SERIES 220 GTI P 2.0 91-92 20M4 Mems 1.6 MPi Turbo 30220300 SD21.3
200 SERIES 220 GTI P 2.0 91-92 20M4 Mems 1.6 SPi CAT 30220300 SD21.3
200 SERIES 220 GTI P 2.0 91-92 20M4 Mems 1.6 SPi NON-CAT 30220300 SD21.3
200 SERIES 220 GTI P 2.0 91-92 20M4 Mems 1.6 STAND.Mpi 30220300 SD21.3
200 SERIES 220 Turbo/Coupe P 2.0 92-95 20T4 Mems 1.6 MONT.MPi 30211600 SD21.3
200 SERIES 220 Turbo/Coupe P 2.0 92-95 20T4 Mems 1.6 MPi Turbo 30211600 SD21.3
25 SERIES 1.1L P 1.1 99-01 K8-1.1 Mems 1.9 30220300 SD21.3
25 SERIES vvc P/D All 99-04 Mems 3 30220300 CD1
25 SERIES P/D 1.4 99-04 Mems 3 30220300 CD1
25 SERIES P/D 1.4 99-04 Mems 3 30220300 CD1
25 SERIES P/D 1.6 99-04 Mems 3 30220300 CD1
25 SERIES P/D 1.8 99-04 Mems 3 30220300 CD1
400 SERIES 414 P 1.4 90-92 14KC/D Mems 1.6 MPi Turbo 30220300 SD21.3
400 SERIES 414 P 1.4 90-92 14KC/D Mems 1.6 SPi CAT 30220300 SD21.3
400 SERIES 414 P 1.4 90-92 14KC/D Mems 1.6 SPi NON-CAT 30220300 SD21.3
400 SERIES 414 P 1.4 90-92 14KC/D Mems 1.6 STAND.Mpi 30220300 SD21.3
400 SERIES 414 P 1.4 95-99 K16-1.4 Mems 1.9 30220300 SD21.3
400 SERIES 416 P 1.6 95-99 K16-1.6 Mems 1.9 30220300 SD21.3
400 SERIES 416 Tourer P 1.6 96-99 16K16 Mems 1.9 30220300 SD21.3
MINI SUPP
SD24.0
Rover-MG IMMOBILISER MATCH
400 SERIES 420 P 2.0 95-99 20T4 Mems 1.9 30220300 SD21.3
400 SERIES 420 GTI P 2.0 91-92 20M4 Mems 1.6 MONT.MPi 30211600 SD21.3
400 SERIES 420 GTI P 2.0 91-92 20M4 Mems 1.6 MPi Turbo 30220300 SD21.3
400 SERIES 420 GTI P 2.0 91-92 20M4 Mems 1.6 SPi CAT 30220300 SD21.3
400 SERIES 420 GTI P 2.0 91-92 20M4 Mems 1.6 SPi NON-CAT 30220300 SD21.3
400 SERIES 420 GTI P 2.0 91-92 20M4 Mems 1.6 STAND.Mpi 30220300 SD21.3
400 SERIES 420 Touring P 2.0 92-96 20T4 Mems 1.6 MONT.MPi 30211600 SD21.3
400 SERIES 420 Touring P 2.0 92-96 20T4 Mems 1.6 MPi Turbo 30220300 SD21.3
400 SERIES 420 Touring P 2.0 92-96 20T4 Mems 1.6 SPi CAT 30220300 SD21.3
400 SERIES 420 Touring P 2.0 92-96 20T4 Mems 1.6 SPi NON-CAT 30220300 SD21.3
400 SERIES 420 Touring P 2.0 92-96 20T4 Mems 1.6 STAND.Mpi 30220300 SD21.3
45 SERIES P/D 1.4 99-04 Mems 3 30220300 CD1
45 SERIES P/D 1.6 99-04 Mems 3 30220300 CD1
45 SERIES P/D 1.8 99-04 Mems 3 30220300 CD1
600 SERIES 620 Turbo P 2.0 94-99 20T4 Mems 1.9 30220300 SD21.3
800 SERIES 820 P 2.0 91-95 20T4 Mems 1.6 MONT.MPi 30211600 SD21.3
800 SERIES 820 P 2.0 91-95 20T4 Mems 1.6 MPi Turbo 30211600 SD21.3
800 SERIES 820 P 2.0 91-95 20T4 Mems 1.6 SPi CAT 30211600 SD21.3
800 SERIES 820 P 2.0 91-95 20T4 Mems 1.6 SPi NON-CAT 30211600 SD21.3
800 SERIES 820 P 2.0 91-95 20T4 Mems 1.6 STAND.Mpi 30211600 SD21.3
800 SERIES 820 P 2.0 95-99 20T4 Mems 1.9 30220300 SD21.3
800 SERIES 820 Vitesse P 2.0 92-96 20T4 Mems 1.6 MPi Turbo 30211600 SD21.3
800 SERIES 820 Vitesse P 2.0 92-96 20T4 Mems 1.6 SPi CAT 30211600 SD21.3
800 SERIES 820 Vitesse P 2.0 92-96 20T4 Mems 1.6 SPi NON-CAT 30211600 SD21.3
800 SERIES 820 Vitesse P 2.0 92-96 20T4 Mems 1.6 STAND.Mpi 30211600 SD21.3
800 SERIES 820 Vitesse P 2.0 92-96 20T4 Mems 1.6 MONT.MPi 30220300 SD21.3
800 SERIES 820 Vitesse Sport P 2.0 94-95 20T4 Mems 1.6 MONT.MPi 30220300 SD21.3
800 SERIES 820 Vitesse Sport P 2.0 94-95 20T4 Mems 1.6 MPi Turbo 30220300 SD21.3
800 SERIES 820 Vitesse Sport P 2.0 94-95 20T4 Mems 1.6 SPi CAT 30220300 SD21.3
800 SERIES 820 Vitesse Sport P 2.0 94-95 20T4 Mems 1.6 SPi NON-CAT 30220300 SD21.3
800 SERIES 820 Vitesse Sport P 2.0 94-95 20T4 Mems 1.6 STAND.Mpi 30220300 SD21.3
800 SERIES 820 Vitesse Sport P 2.0 95-99 20T4 Mems 1.9 30220300 SD21.3
800 SERIES 825 P/D All 96-99 Mems 2J 30220300 CD1
METRO 1.1L P 1.1 91-95 11K2D Mems 1.6 MPi Turbo 30220300 SD21.3
METRO 1.1L P 1.1 91-95 11K2D Mems 1.6 SPi CAT 30220300 SD21.3
METRO 1.1L P 1.1 91-95 11K2D Mems 1.6 SPi NON-CAT 30220300 SD21.3
METRO 1.1L P 1.1 91-95 11K2D Mems 1.6 STAND.Mpi 30220300 SD21.3
METRO 1.4L P 1.4 90-93 14K4C/D Mems 1.6 MPi Turbo 30211600 SD21.3
METRO 1.4L P 1.4 90-94 K16-1.4 Mems 1.6 MPi Turbo 30211600 SD21.3
METRO 1.4L P 1.4 91-95 14K2A Mems 1.6 MPi Turbo 30211600 SD21.3
METRO 1.4L P 1.4 90-93 14K4C/D Mems 1.6 SPi CAT 30211600 SD21.3
METRO 1.4L P 1.4 90-94 K16-1.4 Mems 1.6 SPi CAT 30211600 SD21.3
METRO 1.4L P 1.4 91-95 14K2A Mems 1.6 SPi CAT 30211600 SD21.3
METRO 1.4L P 1.4 90-93 14K4C/D Mems 1.6 SPi NON-CAT 30211600 SD21.3
METRO 1.4L P 1.4 90-94 K16-1.4 Mems 1.6 SPi NON-CAT 30211600 SD21.3
METRO 1.4L P 1.4 91-95 14K2A Mems 1.6 SPi NON-CAT 30211600 SD21.3
METRO 1.4L P 1.4 90-93 14K4C/D Mems 1.6 STAND.Mpi 30211600 SD21.3
METRO 1.4L P 1.4 90-94 K16-1.4 Mems 1.6 STAND.Mpi 30211600 SD21.3
METRO 1.4L P 1.4 91-95 14K2A Mems 1.6 STAND.Mpi 30211600 SD21.3
METRO 1.4L P 1.4 90-95 K16-1.4 Mems 1.6 MPi Turbo 30220300 SD21.3
METRO 1.4L P 1.4 91-95 14K4F Mems 1.6 MPi Turbo 30220300 SD21.3
METRO 1.4L P 1.4 90-95 K16-1.4 Mems 1.6 SPi CAT 30220300 SD21.3
METRO 1.4L P 1.4 91-95 14K4F Mems 1.6 SPi CAT 30220300 SD21.3
METRO 1.4L P 1.4 90-95 K16-1.4 Mems 1.6 SPi NON-CAT 30220300 SD21.3
METRO 1.4L P 1.4 91-95 14K4F Mems 1.6 SPi NON-CAT 30220300 SD21.3
METRO 1.4L P 1.4 90-95 K16-1.4 Mems 1.6 STAND.Mpi 30220300 SD21.3
METRO 1.4L P 1.4 91-95 14K4F Mems 1.6 STAND.Mpi 30220300 SD21.3
MG-F 1.6L P 1.6 99-01 16K16 Mems 1.9 30220300 SD21.3
MG-F 1.8L P 1.8 95-01 K16-1.8 Mems 1.9 30220300 SD21.3
MG-F P/D 1.6 95-01 Mems 3 30220300 CD1
MG-F P/D 1.8 01-02 Mems 3 30220300 CD1
MINI 1.3L P 1.3 96-00 Mems 1.6 SPi NON-CAT 30220300 SD21.3
MINI 1.3L P 1.3 96-00 Mems 1.6 SPi CAT 30220300 SD21.3
MINI 1.3L P 1.3 96-00 Mems 1.6 STAND.Mpi 30220300 SD21.3
TF P/D 1.8 01-04 Mems 3 30220300 CD1
ZR P/D 1.4 01-04 Mems 3 30220300 CD1
ZS P/D 1.8 01-04 Mems 3 30220300 CD1
ZS P/D All 01-04 Mems 3 30220300 CD1
Rover-MG KEYCODING KEYS

100 SERIES P/D All 95-98 5AS 30220300 SD16.3
100 SERIES P/D All 95-98 EKA 30220300 SD16.3
25 SERIES P/D All 04-06 Pektron 30220300 SD20.0
45 SERIES P/D All 04-06 Pektron 30220300 SD20.0
METRO P/D All 93-94 EKA 30220300 SD16.3
MG-F P/D All 95-02 5AS 30220300 SD16.3
MG-F P/D All 95-02 EKA 30220300 SD16.3
MINI P/D All 95-00 5AS 30220300 SD16.3
MINI P/D All 95-00 EKA 30220300 SD16.3
ZR P/D All 95-02 EKA 30220300 SD16.3
ZR P/D All 04-06 Pektron 30220300 SD20.0
ZS P/D All 95-02 EKA 30220300 SD16.3
ZS P/D All 04-06 Pektron 30220300 SD20.0
SAAB KEYCODING KEYS

93 P/D All 98-05 All Variants 30220300 SD16.3
MINI SUPP
SD24.0
SAAB KEYCODING KEYS
95 P/D All 97-05 All Variants 30220300 SD16.3
Seat KEYCODING KEYS

ALHAMBRA P/D 93-07 Immo 1 30220300 SD16.3
ALHAMBRA P/D 93-07 Immo 2 30220300 SD16.3
ALTEA P/D 04-07 CAN Keys 30220300 SD16.3
ALTEA P/D 04-07 CAN Remote 30220300 SD16.3
AROSA P/D 96-05 Immo 1 30220300 SD16.3
AROSA P/D 96-05 Immo 2 30220300 SD16.3
CORDOBA P/D 93-05 Immo 1 30220300 SD16.3
CORDOBA P/D 93-05 Immo 2 30220300 SD16.3
IBIZA P/D 92-07 Immo 1 30220300 SD16.3
IBIZA P/D 92-07 Immo 2 30220300 SD16.3
IBIZA P/D 08-09 Immo 1 30220300 SD16.3
IBIZA P/D 08-09 Immo 2 30220300 SD16.3
LEON (1P) P/D 05-09 CAN Keys 30220300 SD16.3
LEON (1P) P/D 05-09 CAN Remote 30220300 SD16.3
LEON P/D 98-04 Immo 1 30220300 SD16.3
LEON P/D 98-04 Immo 2 30220300 SD16.3
TOLEDO (5P) P/D 05-09 CAN Keys 30220300 SD16.3
TOLEDO (5P) P/D 05-09 CAN Remote 30220300 SD16.3
TOLEDO P/D 91-04 Immo 1 30220300 SD16.3
TOLEDO P/D 91-04 Immo 2 30220300 SD16.3
Seat PIN EXTRACTION

ALHAMBRA P/D 93-07 MOTOMETER DASH 30220300 SD16.3
ALHAMBRA P/D 93-07 VDO DASH 30220300 SD24.0
ALHAMBRA P/D 93-07 EMS 30220300 SD16.3
AROSA P/D 96-05 MOTOMETER DASH 30220300 SD16.3
AROSA P/D 96-05 VDO DASH 30220300 SD24.0
AROSA P/D 96-05 EMS 30220300 SD16.3
CORDOBA P/D 93-05 MOTOMETER DASH 30220300 SD16.3
CORDOBA P/D 93-05 VDO DASH 30220300 SD24.0
CORDOBA P/D 93-05 EMS 30220300 SD16.3
IBIZA P/D 92-07 MOTOMETER DASH 30220300 SD16.3
IBIZA P/D 08-09 MOTOMETER DASH 30220300 SD16.3
IBIZA P/D 92-07 VDO DASH 30220300 SD24.0
IBIZA P/D 08-09 VDO DASH 30220300 SD24.0
IBIZA P/D 92-07 EMS 30220300 SD16.3
IBIZA P/D 08-09 EMS 30220300 SD16.3
LEON P/D 98-04 MOTOMETER DASH 30220300 SD16.3
LEON P/D 98-04 VDO DASH 30220300 SD24.0
LEON P/D 98-04 EMS 30220300 SD16.3
TOLEDO P/D 91-04 MOTOMETER DASH 30220300 SD16.3
TOLEDO P/D 91-04 VDO DASH 30220300 SD24.0
TOLEDO P/D 91-04 EMS 30220300 SD16.3
Skoda KEYCODING KEYS

FABIA P/D 99-07 Immo 1 30220300 SD16.3
FABIA P/D 99-07 Immo 2 30220300 SD16.3
FELICIA P/D 94-01 Immo 1 30220300 SD16.3
FELICIA P/D 94-01 Immo 2 30220300 SD16.3
OCTAVIA P/D 96-04 Immo 1 30220300 SD16.3
OCTAVIA P/D 96-04 Immo 2 30220300 SD16.3
OCTAVIA II P/D 04-09 CAN Keys 30220300 SD16.3
OCTAVIA II P/D 04-09 CAN Remote 30220300 SD16.3
Skoda PIN EXTRACTION

FABIA P/D 99-07 MOTOMETER DASH 30220300 SD16.3
FABIA P/D 99-07 VDO DASH 30220300 SD24.0
FABIA P/D 99-07 EMS 30220300 SD16.3
FELICIA P/D 94-01 MOTOMETER DASH 30220300 SD16.3
FELICIA P/D 94-01 VDO DASH 30220300 SD24.0
FELICIA P/D 94-01 EMS 30220300 SD16.3
OCTAVIA P/D 96-04 MOTOMETER DASH 30220300 SD16.3
OCTAVIA P/D 96-04 VDO DASH 30220300 SD24.0
OCTAVIA P/D 96-04 EMS 30220300 SD16.3
Subaru KEYCODING KEYS

OUTBACK P/D All 96-00 Immo 1 30220300 SD16.3
OUTBACK P/D All 00- Immo 2 30220300 SD16.3
Suzuki KEYCODING KEYS

BALENO DHW P/D All 97-02 Immobiliser 2 30220300 SD16.3
WAGON R P/D All 97-05 Immobiliser 2 30220300 SD16.3
Toyota KEYCODING KEYS

AVENSIS P/D All Auto Detect 30220300 SD16.3
AVENSIS II P/D All Auto Detect 30220300 SD16.3
AVENSIS VERSO P/D All Auto Detect 30220300 SD16.3
COROLLA P/D All Auto Detect 30220300 SD16.3
COROLLA P/D All Auto Detect 30220300 SD16.3
COROLLA VERSO P/D All Auto Detect 30220300 SD16.3
LANDCRUISER AMAZON P/D All Auto Detect 30220300 SD16.3
LANDCRUISER COLORADO P/D All Auto Detect 30220300 SD16.3
LANDCRUISER COLORADO P/D All Auto Detect 30220300 SD16.3
MR2 P/D All Auto Detect 30220300 SD16.3
PREVIA P/D All Auto Detect 30220300 SD16.3
RAV4 P/D All Auto Detect 30220300 SD16.3
YARIS P/D All Auto Detect 30220300 SD16.3
YARIS VERSO P/D All Auto Detect 30220300 SD16.3
Volkswagen KEYCODING KEYS

BEETLE P/D All 98-04 Immo 1 30220300 SD16.3
MINI SUPP
SD24.0
Volkswagen KEYCODING KEYS
BEETLE P/D All 98-04 Immo 2 30220300 SD16.3
BORA P/D 97-01 Immo 1 30220300 SD16.3
BORA P/D 97-01 Immo 2 30220300 SD16.3
CADDY P/D 96-03 Immo 1 30220300 SD16.3
CADDY P/D 96-03 Immo 2 30220300 SD16.3
CORRADO P/D All 95 Immo 1 30220300 SD16.3
CORRADO P/D All 95 Immo 2 30220300 SD16.3
EOS (1K) P/D 05-07 CAN Keys 30220300 SD16.3
EOS (1K) P/D 05-07 CAN Remote 30220300 SD16.3
GOLF (1K) P/D 04-09 CAN Keys 30220300 SD16.3
GOLF (1K) P/D 04-09 CAN Remote 30220300 SD16.3
GOLF P/D 95-04 Immo 1 30220300 SD16.3
GOLF P/D 95-04 Immo 2 30220300 SD16.3
JETTA (1K) P/D 05-07 CAN Keys 30220300 SD16.3
JETTA (1K) P/D 05-07 CAN Remote 30220300 SD16.3
LUPO P/D 98-06 Immo 1 30220300 SD16.3
LUPO P/D 98-06 Immo 2 30220300 SD16.3
PASSAT (3C) P/D 05-07 CAN Keys 30220300 SD16.3
PASSAT (3C) P/D 05-07 CAN Remote 30220300 SD16.3
PASSAT P/D 95-03 Immo 1 30220300 SD16.3
PASSAT P/D 95-03 Immo 2 30220300 SD16.3
POLO P/D 87-07 Immo 1 30220300 SD16.3
POLO P/D 87-07 Immo 2 30220300 SD16.3
SHARAN P/D 95-03 Immo 1 30220300 SD16.3
SHARAN P/D 95-03 Immo 2 30220300 SD16.3
TOURAN (1T) P/D 06-07 CAN Keys 30220300 SD16.3
TOURAN (1T) P/D 06-07 CAN Remote 30220300 SD16.3
VENTO P/D 91-98 Immo 1 30220300 SD16.3
VENTO P/D 91-98 Immo 2 30220300 SD16.3
Volkswagen PIN EXTRACTION

BEETLE P/D All 98-04 MOTOMETER DASH 30220300 SD16.3
BEETLE P/D All 98-04 VDO DASH 30220300 SD24.0
BEETLE P/D All 98-04 EMS 30220300 SD16.3
BORA P/D 97-01 MOTOMETER DASH 30220300 SD16.3
BORA P/D 97-01 VDO DASH 30220300 SD24.0
BORA P/D 97-01 EMS 30220300 SD16.3
CADDY P/D 96-03 MOTOMETER DASH 30220300 SD16.3
CADDY P/D 96-03 VDO DASH 30220300 SD24.0
CADDY P/D 96-03 EMS 30220300 SD16.3
CORRADO P/D All 95 MOTOMETER DASH 30220300 SD16.3
CORRADO P/D All 95 VDO DASH 30220300 SD24.0
CORRADO P/D All 95 EMS 30220300 SD16.3
GOLF P/D 95-04 MOTOMETER DASH 30220300 SD16.3
GOLF P/D 99-03 MOTOMETER DASH 30220300 SD16.3
GOLF P/D 95-04 VDO DASH 30220300 SD24.0
GOLF P/D 99-03 VDO DASH 30220300 SD24.0
GOLF P/D 95-04 EMS 30220300 SD16.3
GOLF P/D 99-03 EMS 30220300 SD16.3
LUPO P/D 98-06 MOTOMETER DASH 30220300 SD16.3
LUPO P/D 98-06 VDO DASH 30220300 SD24.0
LUPO P/D 98-06 EMS 30220300 SD16.3
PASSAT P/D 95-03 MOTOMETER DASH 30220300 SD16.3
PASSAT P/D 95-03 VDO DASH 30220300 SD24.0
PASSAT P/D 95-03 EMS 30220300 SD16.3
POLO P/D 87-07 MOTOMETER DASH 30220300 SD16.3
POLO P/D 87-07 VDO DASH 30220300 SD24.0
POLO P/D 87-07 EMS 30220300 SD16.3
SHARAN P/D 95-03 MOTOMETER DASH 30220300 SD16.3
SHARAN P/D 95-03 VDO DASH 30220300 SD24.0
SHARAN P/D 95-03 EMS 30220300 SD16.3
VENTO P/D 91-98 MOTOMETER DASH 30220300 SD16.3
VENTO P/D 91-98 VDO DASH 30220300 SD24.0
VENTO P/D 91-98 EMS 30220300 SD16.3
Citroen KEYCODING KEYS

BERLINGO P/D All Immo 1 30220300 SD24.0
DISPATCH P/D All Immo 1 30220300 SD24.0
SAXO P/D All Immo 1 30220300 SD24.0
XANTIA P/D All Immo 1 30220300 SD24.0
Peugeot KEYCODING KEYS

206 P/D All Immo1 30220300 SD24.0
607 P/D All Immo1 30220300 SD24.0

PO BOX 3467, Chippenham, Wiltshire, SN15 9FH, UK
Sales & Customer Services: + 44 (0)845 6016510 Facsimile: + 44 (0)8700 941753
Email: sales@spdiagnostics.com Email: support@spdiagnostics.com
www.spdiagnostics.com www.spsupport.com

Key Scan - Vehicle Application Guide

Uploaded by

Key Scan - Vehicle Application Guide

Uploaded by

SPi Vehicle Application Guide

KEYS Pro SD2.

KEYS vehicle applications Guide for the SPi

Audi, Seat, Skoda, Volkswagen - VAG................................................................................ 5

Toyota / Lexus ................................................................................................................ 94

Applications List ............................................................................................................. 98

Pin Extraction Software flow chart

READING MEMORY UNABLE TO EXTRACT

TURN IGNITION OFF

NOTE – KEY PROGRAMMED

ENTER PIN CODE: PIN NOT ACCEPTED

LOGIN SUCCESSFUL KEY CODING FAILED

Audi A2 00-06 Volkswagen Lupo 98-05

Audi A3 96-03 Volkswagen Polo 02 on

Audi A6 97-05 Seat Ibiza 02 on

Audi TT 98-06 Seat Cordoba 02 on

Audi A4 94-01 Seat Toledo 99-05

Audi A4 01 on Seat Leon 99-05

Seat Arosa 97-05

Seat Ibiza 93-99

Re-initialising Procedure – Infrared Key fobs

Point key fob at infrared receiver located in rear view mirror

Repeat above procedure to re-initialise any remaining key fobs.

Re-initialising Procedure – Radio frequency Key fobs

Repeat above procedure to re-initialise any remaining key fobs.

Skoda Octavia 98-04

Re-initialising Procedure (01-04 vehicles only)

Press either the “Lock” or “Unlock” button on the key fob

Within the next 60 seconds: Manually “Unlock” driver‟s side door

Re-initialising Procedure – Radio frequency key fobs (Type 2)

Manually “Unlock” or “Lock” the vehicle using the key

To Erase a lost key Program all remaining keys.

INITIALISING SWITCH IGNITION OFF

ENTER NUMBER OF PLEASE WAIT...

PROGRAMMING KEY SWITCH IGNITION Cycle 3

REMOVE KEY. INSERT PLEASE WAIT...

INSERT FIRST KEY &

To erase a lost key Program all remaining keys.

ENTER PIN CODE: ENTER NUMBER OF

ENTER NUMBER OF PLEASE COMPLETE

ANY KEY NOT PRESENT WILL PRESS AND HOLD REMOTE

PROGRAMMING KEY PLEASE SWITCH IGNITION OFF

INSERT NEXT KEY & TURN NUMBER OF REMOTE(S)

THERE ARE 3 KEYS

DO YOU WANT TO PROGRAM

THERE ARE 2 KEYS

SWITCH IGNITION OFF

WAITING FOR SECURITY

SWITCH IGNITION OFF

SWITCH IGNITION PROGRAM NEXT KEY

TO PROGRAM A NEW SET

SWITCH IGNITION OFF

SWITCH IGNITION OFF

INSERT 'RED' MASTER

REMOVE CURRENT KEY.

SWITCH IGNITION PROGRAMMING

INSERT 'RED' MASTER

Diesel WAITING FOR SECURITY UNABLE TO OBTAIN

INSERT 'RED' MASTER

REMOVE KEY. INSERT

SWITCH IGNITION OFF PROGRAMMING

REMOVE KEY FROM

INSERT KEY TO PROGRAM

ENTER NUMBER OF KEYS

NOTE: INITIALISING UNABLE TO OBTAIN

<OK> PROGRAMMING KEY KEY CODING FAILED

REMOVE KEY. INSERT REGISTRATION FAILURE.

INITIALISING KEY CODING FAILED

Close all doors

Typical 3-button key fob Later style 3-button key fob

Note. A maximum of 4 key fobs can be programmed to the vehicle.

Programming Procedure – Infrared key fobs

Note. System Alarm LED illuminates for approximately 5 seconds

Whilst system Alarm LED is illuminated:

o Point the key fob at the infrared receiver

Typical 3-button key fob Typical 2-button key fob

KEYS Pro SD2.