Scribd
Upload
183 views2 pages

Beam Analysis

This document summarizes the beam analysis of a steel beam with 5 spans using Eurocode standards. It includes the beam geometry, material properties, applied loads including self-weight and additional point loads, and the resulting reactions at each support for different load combinations. The analysis was performed using the Tedds calculation software and considers permanent, imposed, and quasi-permanent load cases.

Uploaded by

ikanyu79
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
183 views2 pages

Beam Analysis

This document summarizes the beam analysis of a steel beam with 5 spans using Eurocode standards. It includes the beam geometry, material properties, applied loads including self-weight and additional point loads, and the resulting reactions at each support for different load combinations. The analysis was performed using the Tedds calculation software and considers permanent, imposed, and quasi-permanent load cases.

Uploaded by

ikanyu79
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 2

Project Job Ref.

Section Sheet no./rev.


PnE Consultants
#12-09 Manhattan House
1
Singapore 169876 Calc. by Date Chk'd by Date App'd by Date

P 2/9/2018

BEAM ANALYSIS (EUROCODES)

ANALYSIS
Tedds calculation version 1.0.23

Geometry
Geometry (m) - Steel (EC3) - SHS 100x100x4.0

Span Length (m) Section Start Support End Support


1 0.15 SHS 100x100x4.0 Free Pinned
2 1 SHS 100x100x4.0 Pinned Pinned
3 1 SHS 100x100x4.0 Pinned Pinned
4 1 SHS 100x100x4.0 Pinned Pinned
5 0.15 SHS 100x100x4.0 Pinned Free
SHS 100x100x4.0: A = 15 cm , Iy = 232 cm , Iz = 232 cm , Ay = 8 cm2, Az = 8 cm2
2 4 4

Steel (EC3): Density 7850 kg/m3, Youngs 210 kN/mm2, Shear 80.8 kN/mm2, Thermal 0.000012 C-1
Loading
Self weight included
Permanent - Loading (kN/m,kN)

Load combination factors


Self Weight

Permanent

Imposed

Load combination

1.35G + 1.5Q + 1.5RQ (Strength) 1.35 1.35 1.50


1.0G + 1.0Q + 1.0RQ (Service) 1.00 1.00 1.00
1.0G + 1.02Q (Quasi) 1.00 1.00 0.30
Member Loads
Member Load case Load Type Orientation Description
Member Permanent UDL GlobalZ 15.9 kN/m
Member Permanent Point load GlobalZ 4.5 kN at 0.755 m
Member Permanent Point load GlobalZ 14.1 kN at 2.714 m

Results
Reactions
Self Weight - Local node reactions - Node: (Horiz (kN), Vert (kN), Mom (kNm))
Project Job Ref.

Section Sheet no./rev.


PnE Consultants
#12-09 Manhattan House
2
Singapore 169876 Calc. by Date Chk'd by Date App'd by Date

P 2/9/2018

Load case: Self Weight


Node Force Moment
Fx Fz My
(kN) (kN) (kNm)
2 0 0.1 0
3 0 0.1 0
4 0 0.1 0
5 0 0.1 0
Permanent - Local node reactions - Node: (Horiz (kN), Vert (kN), Mom (kNm))

Load case: Permanent


Node Force Moment
Fx Fz My
(kN) (kN) (kNm)
2 0 10.6 0
3 0 19.1 0
4 0 25.6 0
5 0 15.7 0
Imposed - Local node reactions - Node: (Horiz (kN), Vert (kN), Mom (kNm))

Load case: Imposed


Node Force Moment
Fx Fz My
(kN) (kN) (kNm)
2 0 0 0
3 0 0 0
4 0 0 0
5 0 0 0

You might also like