Scribd
Upload
316 views6 pages

Emulator Immo Mercedes Cr2

This device is an emulator immo that replaces a damaged immobilizer or lost car keys for certain Mercedes models including Sprinter, ML, and CR2. It works by making changes to the memory content of the Engine Control Module (ECM) to enable driving the car to a service center. It provides a low-cost alternative to replacing an immo or duplicating car keys. Connecting it to the ECM involves accessing memory 5P08C3 and changing values at specific addresses.

Uploaded by

Jose Luis Toco
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
316 views6 pages

Emulator Immo Mercedes Cr2

This device is an emulator immo that replaces a damaged immobilizer or lost car keys for certain Mercedes models including Sprinter, ML, and CR2. It works by making changes to the memory content of the Engine Control Module (ECM) to enable driving the car to a service center. It provides a low-cost alternative to replacing an immo or duplicating car keys. Connecting it to the ECM involves accessing memory 5P08C3 and changing values at specific addresses.

Uploaded by

Jose Luis Toco
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 6

EMULATOR IMMO

MERCEDES CR2
SPRINTER 2,2 Cdi 2,7 Cdi ML 2,7 Cdi 5
plugs

Thank you for purchasing our device.


Emulator immo to the car group of Mercedes
CR2 replaces damaged immobilizer or the car
key for Mercedes Sprinter, ML 5 plugs.

It function after made changes in memory


content of Engine Control Module ECM.

In case of losing the car keys or a car burglary,


it enable to drive off from the road to the car
service.

Due to a low cost you can leave it in the car


instead of buying a new immo or making car
keys duplicate.
There is a possibility of using it as the
additional security!!
Red LED indicating about transmission: will
light up permanently after properly working.
Connecting emulator to ECM 5 plugs Sprinter
and ML:
GND 1.04, 1.05, 1.06 ACC 2.13
CAN H 2.11 CAN L 2.12
In the ECM of Sprinter, ML CR2 engine, 5
plugs, find memory 5P08C3 (read and type as
SPI 95040).
In memory 5P08C3 in address 1D0 to 1D4
type: 02 02 00 FF FF.
Warning!!

Due to possible construction changes of the


cars, before connecting the device check
signals by multimeter on the ECM plug.

You might also like