Scribd
Upload
129 views2 pages

Automatic Static Transfer Switch

dfhuhi

Uploaded by

anoop13
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
129 views2 pages

Automatic Static Transfer Switch

dfhuhi

Uploaded by

anoop13
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 2

Automatic Static Transfer Switch

The Automatic static switch product line is a micro-controller driven


state-of-the-art switch between the AC mains and the inverter to provide
uninterruptible AC power. After an extremely quick detection of a mains
fault, the static switch transfers the load almost without cut off to the
redundant AC line. A communication and synchronization
bus is responsible for the system performance and the Inverters are
synchronized to the public AC mains.

Super Fast (1/4 cycle) SCR Based Static Transfer Switch for high
availability mission critical Transfers for all phase angle differences
between sources.
FEATURES
ON LINE or OFF LINE mode selection
High performance AC line quality monitoring
Quick detection of AC faults
Configurable switching criteria
Load transfer of up to 20 kVA
Synchronization of the UPS and Mains
Convection cooled
Compact and light
Power connectors on the bottom with circuit breakers

APPLICATIONS
Critical Data Centers
Telecommunications Sites
Air Traffic Control Sites
Petrochemical Plants
Semiconductor Fab Plants Controls
Critical Industrial Controls

TYPICAL APPLICATIONS
Data Processing
Telecommunications
Manufacturing Processes
Distributed Computing

TYPICAL INPUT SOURCES


UPS
Inverters
Motor Generators
Dual Substations
AC Regulators
TECHNICAL SPECIFICATIONS
Operation Voltage/frequency : 230+/- 30% Single Phase, 2 Wire, 50-60Hz
Current Rating : 0-100A
Sensing time : 2 ms
Auto transfer : 4 ms (or less)
Reacquisition : 3 cycles
User-defined transfer angle : max 180°
Temperature : 0-40°C (operating), 0-80°C (storage)
Audible noise : <65 dBA (6 ft.)
Overload capability : 125% (30 min.), 150% (1 min.), 1000% (3 cycles)
LED's : Mains
DG Source
Load on Mains
Load on DG
Circiut breakers : Mains
DG
Load
Termination : Common Neutral to load and source
Transfer logic : Load on Mains if present (voltage range
150 to 275Vac)
Load on DG if present (voltage range
150 to 275Vac and Mains absent)
Load on Mains/DG respectively only if these souces
are only present (voltage range 150 to 275Vac)

Intelux Electronics Pvt. Ltd. Tele. +91-20-24223734 /83 /84


Unit No-2, Electronic Co- OP Estate, Fax +91-20-24221258
Pune Satara Road,
Pune 411009, Email: pmumarketing@inteluxindia.com
Maharashtra, India. Website: www.inteluxindia.com
Intelux Electronics Pvt. Ltd. reserves the right to make changes in specifications and / or discontinue any product at any time without notice or obligations and will not be
liable for any consequences resulting from the use of this publication.

© 2010-11 Intelux Electronics Pvt. Ltd. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright holder.

You might also like