Zedprogmanual PDF

ZED–PROG
USER MANUAL
İSTANBUL ELEKTRONİK ANAHTAR
Version 1.4
Istanbul, May 2010
1
CONTENTS Page
1. Zed-Prog and Hardware Features.............................................................................3
2. Zed-Prog Usage............................................................................................................5
3. Zed-Prog Update.........................................................................................................7
4. Loading dump file to Pc software using Zed-Prog...................................................9
5. EEPROM and MCU Applications List...................................................................12
6. Zed – Prog EEPROM and MCU Packs.................................................................15
7. Zed – Prog EEPROM and MCU Adapters............................................................17
8. Zed-Prog EEPROM Applications...........................................................................22
9. Zed-Prog Processor Applications............................................................................80
10. Appendix................................................................................................................126
2
1. Zed-Prog and Hardware Features
Zed-Prog:
Zed-Prog is a tool which can read Eeproms and Processors without removing most of them from
circuit board. It does not need PC connection to operate, it is used with Zed-BULL transponder
programmer. Zed-Prog, can read most of the processors and the Eeproms which Zed-BULL Eeprom
applications have, moreover for most of the modules there is no need for chip removal, it can read
the content of the Eeprom or the processors with a help of test clip. Zed-Prog now can read most of
the processor applications of Zed-BULL Eeprom & Mcu Software.
Zed-Prog Hardware:
Details of Zed-Prog hardware is given below:
1. Update button
2. Communication status leds
3. Status led
4. Clips connection socket
5. On/off button
6. Power in jack
7. Zed-Bull & Zed-Prog connection socket
8. Zed-Prog & PC connection socket(USB)
9. Zed-Bull & Zed-Prog connection cable
10. Zed-Bull connection tip
11. Zed-Prog connection tip
12. Zed-Bull & PC connection(USB) cable
13. PC connection tip
14. Zed-Prog connection tip
15. Zed-Prog EEPROM clips
3
Zed-Prog Hardware:
4
2. Zed-Prog Usage
Zed-Prog can only be used with Zed-BULL transponder programmer device. First Zed-BULL
connection should be done to work with Zed-Prog. Please see the figure 2.1 below to see the Zed-
Prog and Zed-BULL connection.
Figure 2.1 Zed-Prog & Zed-Bull Connection

Warning 1: While making connections of Zed-Prog, On/off button should be in off position.
Warning 2: To read chips without removal, power should be connected to Zed-Prog(Zed-prog can
be feed by Zed-BULL).
After Zed-Prog is connected to Zed-BULL, before turning Zed-Prog on, test clip should be
connected to Zed-Prog and to the chip to be read as well.
Figure 2.2 Connecting Clip to the chip

Warning 3: It is highly recommended to make connections of Zed-Prog when it is off. You can
make connections when it is on, but this may cause unwanted short circuits on the hardware and
5
may cause serious damages.
Zed-Prog Eeprom test clips has 7 black and 1 red connection wire edges. Red edge represents first
reader pin of the test clips and it should be aligned with the first pin of the Eeprom. The tips for
finding first pin of the Eeproms are explained with details in each module description. Again with
the processor clips first pin should be aligned with the red edge of the clip. Detailed information
about Zed-Prog MCU Adapters has been given in Section 7.
After all connections are obtained, now it is safe to turn Zed-Prog on. When Zed-Prog is on status
led will flash quickly. When Zed-prog is on, Zed-Prog menu should be selected in Zed-BULL main
menu. An then software pack and type of IC is selected. Zed-BULL screen will tell the user what to
do in each step.
Figure 2.3 Choosing chip type in Zed-BULL menu
After read process is completed, Zed-Prog should be turned of and the clip should be removed from
the chip.
Important:
Most of the modules with Eeprom can be read without chip removal. But some of the modules with
processor can only be read with chip removal. This manual tells you which modules can be read in
circuit and which modules can be read with chip removal. Please see the explanations for each
module. While reading processors please follow the instructions exactly as it is described and read
the motes for each module carefully. Do not try to read the chips in circuit, which should be
removed and read.
6
3. Zed-Prog Update
Before starting updating Zed-Prog, connect Zed-Prog to PC via USB cable. Then make sure that
on/off button is off and plug-in the Zed-Prog power adapter. The connection configuration is shown
in figure 3.1 below
Figure 3.1 Zed-Prog power in and usb connection
While Zed-Prog on/off button is in off position, press update button and hold your finger on it, turn
on the on/off button, status led should flash, Rx and Tx leds will turn on and then turn off, finally
status led will turn on and will stay on solid. Now you can release your finger and Zed-Prog is in
loader mode.
Ow run Zed-BULL PC software, do not click connect, go to setting >> Module update and choose
Zed-Prog as the module.
Settings >> Update >> Module update
F
Figure 3.2 Updating Zed-prog from Zed-BULL pc software
7
Choose Zed-prog as module. Click open file and choose the Zed-Prog update file with “.zpp”
extension. Click update button, Zed-prog will be updated.
Figure 3.3 Update steps
Figure 3.4 Update status screen
After update process is successful, following warning screen will appear.
Figure 3.5 Update result information screen
8
4. Saving read EEPROM file to your Pc using Zed-BULL PC Software
Zed-Bull and Zed-Prog are sufficient to do EEPROM applications. However, one may need to copy
the EEPROM data to the computer in certain situations. When this is the case, Zed-Prog should be
turned-off after the EEPROM is read. Subsequently, Zed-Prog should be connected to the computer
via USB cable. Also power adapter should be connected. Connections are shown in Figure 4.1.
Figure 4.1 Zed-Prog Power in jack and usb connection
Once the connections are done properly, Zed-Prog can be turned-on. After the device is powered,
the status LED will start flashing rapidly. After Zed-Prog is configured, Zed-Bull computer
program is to be opened. From the program select “Zed-Prog” from the “Help” menu.
Extended Functions >> Zed-PROG
Figure 4.2 Choosing Zed-Prog from Zed-Bull Pc Software
9
After clicking Zed-Prog, following window will appear:
Figure 4.3 Zed-Prog Window
From the Zed-Prog window, select the EEPROM type from the left frame and click “READ” button
in Figure 4.4. EEPROM 24c02 is selected as an example. After clicking READ button you should
see a screen as in Figure 4.4. The EEPROM data is provided in the wide area on the right hand side
while the “EEPROM is read” status notification will appear in the bottom left corner of the window.
Figure 4.4 Zed-Prog window after successful read
In order to save the read EEPROM file, select “Save” from the “File” menu.
File >> Save
10
Figure 4.5 Saving File
Once “Save” option is selected a window should appear. The file is saved after the name and the
directory of the file is entered. It is vital that file extension is selected as “.BIN”
Figure 4.5 Save file options
11
5. Zed-Prog EEPROM and MCU Applications List
1 Opel immo2 - Siemens immobox
2 VW, Seat immo2 - Siemens immobox
3 VW, Seat immo3 - Valeo immobox
4 Fiat,Lancia,Citroen,Peugeot - Delphi immobox
5 Opel immo1 - Siemens immobox
6 Honda, Acura – immobox
7 Honda, Rover - Valeo immobox
8 Fiat, Lancia - imm001.01 magneti marelli immobox
9 Fiat, Lancia - imm110.01 magneti marelli immobox
1 .Mercedes Sprinter, Vito, Vw volt - Temic immobox
11 Fiat, Alfa Romeo, Lancia - magneti marelli BSI
12 Fiat, Citroen, Peugeot code2 - Delphi immobox
13 VW,Skoda,Seat immo1 - Siemens immobox
14 Fiat, Citroen, Peugeot, Iveco code3 - Magneti marelli BSI
15 Daihatsu - immobox 1998-2000
16 Renault, Dacia, Opel - Sagem immobox
17 Renault, Dacia - Siemens UCH
18 Fiat, Lancia, Alfa romeo - Delphi BSI
19 Peugeot, Citroen, Valeo - immobox
20 Toyota, Daihatsu - immobox 1998-99
21 Volvo immo3 - Bosch immobox
22 Toyota - Bosch, Fujitsu ECU
23 Toyota, Rav4 - Denso, Fujitsu ECU
24 Toyota - immobox
25 Renault Laguna2 - Sagem UCH
26 Mercedes TIR - Temic ECU
27 Renault Megane2, Scenic2 - Siemens UCH
28 Alfa Romeo Code2 - Bosch immobox
29 Mitsubishi - Bosch immobox
30 BMW, Range Rover, Mini Cooper - EWS1
33 Iveco Daily, Iveco Truck - Bosch immobox
34 Renault - Valeo immobox
35 Alfa Romeo, Iveco - Bosch immobox
36 Suzuki - immobox
12
37 Toyota - ECU
38 Volvo, Mitsubishi - Bosch immobox
39 Toyota - Denso ECU
40 Nissan, Subaru - Siemens immobox
41 Peugeot motorbike - Marelli immobox
42 Renault - Sagem UCH
43 Peugeot - Siemens BSI
44 Peugeot - Siemens BSI
45 Audi - Delphi immobox
46 Peugeot, Fiat, Lancia, Citroen - Texton immobox
47 Chrysler, Jeep, Dodge - SKIM immobox
48 Mazda, Ford - Temic immobox
49 Suzuki, Mitsubishi - immobox
50 Peugeot, Fiat, Citroen - immobox
51 Toyota - immobox
52 Nissan - Siemens immobox(NATS-4)
53 Volvo - Bosch immobox
54 Daewoo - immobox
55 Opel, Isuzu - immobox
56 Renault - Siemens immobox -98
57 Fiat - Delphi BSI
58 Ford - immobox
59 Ford - immobox
60 Mazda - Lucas immobox
61 Ford - Visteon Dashboard
62 Ford - Visteon ECU
63 Ford, Mazda - Siemens ECU
64 Fiat, Lancia - IMM100.01 Magneti marelli immobox
65 Fiat - Siemens BSI
66 Renault - Siemens UCH
67 Acura – immobox
68 BMW, Range Rover, Mini Cooper – EWS4
69 Yamaha - Moric immobox
70 Renault, Opel - Sagem UCH
71 Opel, Isuzu - immobox
72 Suzuki - Denso immobox
73 Ducati bike - Magneti Marelli Dashboard immobox
74 Honda bike - immobox
13
75 Honda bike - immobox
76 Honda bike – immobox
77 Renault - Johnson UCH
78 Aprilla scooter – Dashboard
79 Mazda - Denso ECU
80 Mazda - Mitsubishi ECU
81 Peugeot, Citroen – BSI
82 Chery – immobox
83 Ford - Delphi ECU
84 Renault - Valeo BSI
85 Toyota - Valeo immobox
86 Nissan - Siemens immobox(NATS-5)
87 Hyundai – immobox
88 Ducati motorbike - Digitek dashboard
89 Nissan – Dashboard
90 Chevrolet - Siemens UCH
14
5. Zed-Prog EEPROM and MCU Packs
EEPROM PACK(STANDART PACKAGE):
All modules with Eeprom (Total 54 Modules)-Almost all of them can be read in circuit
PACK 1 :
Module 8 : Fiat, Lancia – Magnetti Marelli -> Bravo(1998-2001), Marea(1998-), Palio(-1999)-

Read incircuit
Module 50: Peugeot,Fiat, Citroen -> 306, Expert, Ranch-Read incircuit
Module 51: Toyota -> Avensis-Read with chip removal
Module 85: Toyota - Valeo immobox-Read with chip removal
PACK 2 :
Module 30: BMW, Range Rover, Mini Cooper -EWS1-Read with chip removal
Module 31: BMW, Range Rover, Mini Cooper -EWS2-Read with chip removal
Module 32: BMW, Range Rover, Mini Cooper -EWS3-Read incircuit
PACK 3 :
Module 5: Opel immo1- Siemens ->Astra F, Calibra, Combo B, Omega(1996-1999),Sintra(-1999),
Tigra,Vectra B-Read with chip removal
Module 7: Honda Rover – Valeo -> Accord(-1999),Civic(-2001)-Read with chip removal
Module 13: VW, Skoda,Seat immo1-Siemens -> Caddy(-1998,Golf 3, Passat 3, Polo3(-1998),

Transporter(-1998), Vento-Read in circuit
Module 40: Nissan, Subaru – Siemes -> Primer(-1998), Serena(-1998), Sunny, Terrano2(-1998),
Vannete(-1998)-Read with chip removal
Module 44: Peugeot -Siemens BSI -> 206(1998-2001)-Read with chip removal
Module 54: Daewoo -> Espero, Lanos(-2002), Leganza(-2000), Matiz(-2001), Nexia,

Nubira(-2000)-Read with chip removal
Module 56: Renault – Siemens immobox-98 -> Megane(-1999), Twingo(-2000)-Read with chip
removal
Module 60: Mazda – Lucas -> 323(-1999), 626(-1999), MX-5-Read with chip removal
Module 66: Renault – Siemens UCH -> Megane, Scenic-Read with chip removal
Module 90: Chevrolet - Siemens UCH - Read with chip removal
15
PACK 4 :
Module 11: Fiat, Alfa Romeo, Lancia - magneti marelli BSI - Read in circuit
Module 25: Renault Laguna2 - Sagem UCH
Module 27: Renault Megane2, Scenic2 - Siemens UCH
Module 61: Ford - Visteon Dashboard
Module 65: Fiat - Siemens BSI
Module 68: BMW, Range Rover, Mini Cooper - EWS4

Note: In Pack-4, only Module 11 can be read with Version 01.04 – 01.06. The other modules of this
pack are going to be added in next versions.
PACK 5 :
Module 1: Opel immo2 - Siemens immobox-Read with chip removal
Module 2: VW, Seat immo2 - Siemens immobox-Read with chip removal
Module 52: Nissan - Siemens immobox(NATS-4)
Module 58: Ford - immobox-Read with chip removal
Module 59: Ford - immobox-Read with chip removal
Module 86 : Nissan - Siemens immobox(NATS-5)
PACK 6:
Module 9: Fiat, Lancia - imm110.01 magneti marelli immobox-Read with chip removal
Module 10: Mercedes Sprinter, Vito, Vw volt - Temic immobox-Read with chip removal
Module 41: Peugeot motorbike - Marelli immobox-Read with chip removal
Module 47: Chrysler, Jeep, Dodge - SKIM immobox-Read with chip removal
Module 64: Fiat, Lancia - IMM100.01 Magneti marelli immobox-Read with chip removal
Module 82: Chery – immobox-Read with chip removal
Module 84: Renault - Valeo BSI-Read with chip removal
16
7. Zed – Prog EEPROM and MCU Adapters:
EEPROM Pack:
Small EEPROM Adapter: Using this adapter, small pack EEPROMs can be read either in circuit or
with chip removal.
Big EEPROM Adapter: Using this adapter, big pack EEPROMs can be read either in circuit or with
chip removal.
General Purpose EEPROM Adapter:

Using this adapter, small and big pack
EEPROMs can be read with chip removal. Also,
TSSOP8 pack EEPROM which is available on
module 14 can be read.
Be careful with the direction of the EEPROMs.
17
Pack 1 :
Using this adapter, the processors of pack1 modules can be read in circuit or with chip removal. Be
careful with the direction of the MCUs. The detailed information has been given in section 9.
Please read this information before doing application.
Pack 2 :
Using the adapter is shown below, the processors of pack 2 modules can be read with chip removal.
Be careful with the direction of the MCUs. “2D47J” mask numbers processors can not be read
with this adapter. The detailed information has been given in section 9. Please read this information
before doing application.
18
Using the adapter is shown below, EWS3 Module(Module 32) processor can be read in circuit. The
processor need to be cleaned very well, before reading. Be careful with the direction of the
MCUs.“2D47J” mask numbers processors can not be read with this adapter.
Pack 3 :
Using this adapter, the processors of pack 3 modules can be read in circuit or with chip removal.
Be careful with the direction of the MCUs. The detailed information has been given in section 9.
Please read this information before doing application.
19
Pack 4 :
Using this adapter, the processors of pack 4 modules can be read in circuit or. By soldering only
four wires, applications can be done. The detailed information and photos have been given in
section 9. Please read this information before doing application.
Pack 5 :
Using the adapter is shown below, the 28 pins processors of pack 5 modules can be read with chip
removal.
Be careful with the direction of the MCUs:
20
Pack 6 :
Using the adapter is shown below, the 28 pins processors of pack 6 modules can be read with chip
removal. On top side 05B/X processors can be read, and on bottom side 08AZ/AB processors can
be read. Be careful with the direction of the MCUs.
The detailed information has been given in section 9. Please read this information before doing
application.
Top Side:
Bottom Side:
21
8.
Zed-Prog
EEPROM
APPLICATIONS
22
Module 3:
VW, Seat immo3 - Valeo immobox
24c04 8pins, 512 Bytes

VW,SEAT
ID: 44
Transponder Type: Blank PCF7935
Programmed transponder will start the vehicle
Note: Eeprom can be read in circuit in this module. Eeprom pins should be clear for good
conductivity.
23
If there are components which are indicated in rectangle on the back side of the board, the floating
wire in the test clip should be short circuited to the crystal pin which is indicated in circle.
24
Module 4:
Fiat,Lancia,Citroen,Peugeot - Delphi immobox

Fiat,Lancia,Citroen Jumper/Relay,Peugeot Boxer
ID: 13
Transponder Type: T5
conductivity.
25
Module 6:
Honda, Acura – immobox

Honda,Acura
ID: 13
Programmed transponder will start the vehicle.
conductivity.
26
Module 12:
Fiat, Citroen, Peugeot code2 - Delphi immobox
93lc56b 8pins, 256 Bytes

Fiat Ducato2,Citroen Jumper/Relay 2
ID: 48
Transponder Type: Megamos Crypto
Programmed transponder and created image file will start the vehicle.
conductivity.
27
Module 14:
Fiat, Citroen, Peugeot, Iveco code3 - Magneti marelli BSI
95c160/95c320 8pin(SSOP), 2048/4096 Bytes

Ducato3, Boxer3, Jumper3, Daily
ID: 48
Programmed transponder should be programmed into vehicle with a diagnostic tool with the
calculated pin code.
Not: This module has TSSOP8 pack EEPROM. EEPROM has to be removed and read by adapter is
shown below.
28
Module 15:
Daihatsu - immobox 1998-2000
93lc66 8 pin(dip), 512 Bytes

Daihatsu
ID: 4C
Transponder Type: Jma TPX1, Silca Electronic head
conductivity.
29
Module 16:
Renault, Dacia, Opel - Sagem immobox
93c46/93c56 8pin, 128/256 Bytes

Dacia, Opel movano, Renault master
ID: 33
Transponder Type: T5 or PCF7930/31/35
30
conductivity.
31
Module 17:
Renault, Dacia - Siemens UCH
93c66 8pin, 512 Bytes

clio, symbol, logan, sandero, solenzo
ID: 46
Programmed transponder should be programmed into vehicle using a diagnostic tool with
calculated pin code
32
Module 18:
Fiat, Lancia, Alfa romeo - Delphi BSI
93c66b 8pin, 512 Bytes

Doblo, Albea, Alfa 156, Punto
ID: 48
Programmed transponder and created image file will start the vehicle.
conductivity.
33
Module 19:
Peugeot, Citroen, Valeo - immobox
Berlingo, 406
ID: 33
conductivity.
34
Module 20:
Toyota, Daihatsu - immobox 1998-99

Corolla,Camry,Hilux,Daihatsu
ID: 4C
35
Module 20:
conductivity.
36
Module 21:
Volvo immo3 - Bosch immobox
93c56/93c66 8pin, 256/512 Bytes

cars and trucks
ID: 44
conductivity.
37
Module 22:
Toyota - Bosch, Fujitsu ECU
24c02/25020/25040 8pin, 256/256/512 Bytes

Corolla, Yaris
ID: 4C
Transponder Type: Jma TPX1, Silca Electronic Head
38
Module 23:
Toyota, Rav4 - Denso, Fujitsu ECU
95080/93c86/25080 8pin, 1024/2048/1024 Bytes

Corolla, Yaris, Camry
ID: 4C
Transponder Type: Jma TPX1, Silca Electronic Head
39
Module 24:
Toyota - immobox

Corolla, Yaris, Camry
ID: 4C
Note: Eeprom can be read in circuit in this module, but the free wire in the test clip should be short
circuited to the crystal in the circuit board as in the picture above. Eeprom pins should be clear for
good conduction.
40
Module 26:
Mercedes truck - Temic ECU
93C56/93c66/93c86 8pin, 256/512/2048 Bytes

Actros, Atego, Axor
ID: 13
41
Module 28:
Alfa Romeo Code2 - Bosch immobox

146
ID: 44
42
Module 29:
Mitsubishi - Bosch immobox

Carisma, Space Star
ID: 44
43
Module 33:
Iveco Daily, Iveco Truck - Bosch immobox

Iveco Daily,Iveco Truck
ID: 46
Programmed transponder should be programmed into the vehicle using a diagnostic tool with
the calculated pin code
44
Module 34:
Renault - Valeo immobox

Laguna1
ID: 33
45
Module 35:
Alfa Romeo, Iveco - Bosch immobox

145, iveco
ID: 33
46
Module 36:
Suzuki - immobox
93lc66 8pin, 512 Bytes

Swift
ID: 4C
47
Module 37:
Toyota - ECU
25080/95080 8pin, 1024/1024 Bytes

Corolla, Yaris
ID: 4C
conductivity.
48
Module 38:
Volvo, Mitsubishi - Bosch immobox

Carisma
ID: 33
Note: Eeprom can be read in circuit in this module, Eeprom pins should be clear for good
conduction.
49
Module 39:
Toyota - Denso ECU

Corolla
ID: 4C
50
Module 42:
Renault - Sagem UCH
93c66, 8pin, 512 Bytes

Clio hb
ID: 46
calculated pin code
51
Module 43:
Peugeot - Siemens BSI
93c66, 8pin, 512 Bytes

406
ID: 45
52
Module 45:
Audi - Delphi immobox
93c46, 8pin, 128 Bytes

Audi
ID: 13
53
Module 46:
Peugeot, Fiat, Lancia, Citroen - Texton immobox
93c66/95040, 8pin, 512 Bytes

306, Scudo
ID: 33
54
Module 47:
Chrysler, Jeep, Dodge - SKIM immobox
Motorola MC68HC08AB16A(L72A)/MC68HC08AZ32(J66D)/24c02, 64pin/64pin/8pin,

512/512/256 Bytes
Chrysler,Jeep,Dodge
ID: 64
55
Module 49:
Suzuki, Mitsubishi - immobox
24c01, 8pin, 128 Bytes

Grandvitara, Lancer, Pacero, Galand
ID: 4C
56
Module 53:
Volvo - Bosch immobox
93C46, 8pin, 128 Bytes

Volvo
ID: 33
57
Module 55:
Opel, Isuzu - immobox
93c46, 8pin, 128 Bytes

Frontera, Trooper
ID: 13
conductivity.
58
Module 57:
Fiat - Delphi BSI
93c86, 8pin, 2048 Bytes

Grande punto
ID: 46
conductivity.
59
Module 62:
Ford - Visteon ECU
95040, 8pin, 512 Bytes

Focus,Fusion,Mondeo,Transit
ID: 60
Note: The Eeprom which is shown above can be read in circuit in this module. Eeprom pins should
be clear for good conductivity.
60
Module 63:
Ford, Mazda - Siemens ECU
93C56/93C86, 8pin, 256/2048 Bytes

Mazda2,Fiesta
ID: 63
Transponder Tipi: Jma TPX2, Silca Electronic head
conductivity.
61
Module 67:
Acura - immobox
93C46, 8pin, 128 Bytes

Acura
ID: 13
62
Module 69:
Yamaha - Moric immobox
Seiko S29190, 8pin, 128 Bytes

Yamaha
ID: 62
conductivity.
63
Module 70:
Renault, Opel - Sagem UCH
93c66, 8pin, 512 Bytes

Vivaro, Movano, Kango, Trafic,Master
ID: 46
Transponder Type: PCF7936
Calculated pin code can be used while programming transponder with a diagnostic tool
64
Module 71:
Opel, Isuzu - immobox
93C46, 8pin, 128 Bytes

Frontera, Trooper
ID: 48
Programmed transponder and created image file will start the vehicle
conductivity.
65
Module 72:
Suzuki - Denso immobox
93C66, 8pin, 512 Bytes

Suzuki motorbike
ID: 62
66
Module 73:
Ducati bike - Magneti Marelli Dashboard immobox
24c16,24c02, 8pin, 2048/256 Bytes

Ducati motorbike
ID: 11
67
Module 74:
Honda bike - immobox
93c46, 8pin, 128 Bytes

Honda motorbike
ID: 46
Transponder Type: Blank Pcf7936
Programmed transponder andcreated image file will start the vehicle
68
Module 75:
93c56, 8pin, 128 Bytes

Honda motorbike
ID: 46
Transponder Type: Blank Pcf7936]
Programmed transponder and createdimage file will start the vehicle
conductivity.
69
Module 76:
93c66, 8pin, 128 Bytes

Honda motorbike
ID: 46
Transponder Type: Blank Pcf7936
conductivity.
70
Modül 77:
Renault - Johnson UCH
● 95160, 8pin, 2048 Bytes

● Clio3, Modus
● ID: 46
● Transponder Type: Blank Pcf7946/47 - 2 buttons remote key
 Programmed transponder and created image file will start the vehicle
71
Modül 78:
Aprilla scooter - Dashboard
● 24c01,24c16 8pin, 128/2048 Bytes

● Aprilla
● ID: 12
● Transponder Type: T5
 Programmed transponder will start the vehicle
72
Modül 79:
Mazda - Denso ECU
● 93c56 8pin, 256 Bytes

● 323, 626
● ID: 8C
● Transponder Type: Blank 8C
● Calculated pin code can be used while programming transponder manually
Note: The Eeprom which is shown above can be read in circuit in this module. Eeprom pins should
be clear for good conductivity.
73
Modül 80:
Mazda - Mitsubishi ECU
● 24c01 8pin, 128 Bytes

● 323, 626
● ID: 8C
● Transponder Type: Blank 8C
● Calculated pin code can be used while programming transponder manually
74
Modül 81:
Peugeot, Citroen - BSI
● 95c160 8pin, 2048 Bytes

● 206, 307, Berlingo
● ID: 46
● Transponder Type: Blank PCF7936
 Calculated pin code can be used while programming transponder with a diagnostic tool
75
Modül 83:
Ford - Delphi ECU
● 95c160 8pin, 2048 Bytes

● Focus, KA
● ID: 4C
● Transponder Type: Jma TPX1, Silca Electronic head
● Programmed transponder will start the vehicle
76
Modül 87:
Hyundai - immobox
● 93c56, 8pin, 256 Bytes

● Galopper, Atos(99), H200
● ID: 4C
77
Modül 88:
Ducati motorbike - Digitek dashboard
● 24c16 8pin, 2048 Bytes

● 848
● ID: 12
● Transponder Type: T5
78
Modül 89:
Nissan - Dashboard
● 93c66 8pin, 512 Bytes

● Sunny, Almera classic
● ID: 46
● Programmed transponder and created image file will start the vehicle
79
9.
Zed-Prog
MCU (PROCESSOR)
APPLICATIONS
80
Module 1:
Opel immo2 - Siemens immobox
TMS370C702 28pin, 256 Bytes

Agila, AstraG, Combo, CorsaC, Meriva, Omega, Sintra, VectraB, Tigra, Zafira
ID: 40
MCU Pack : PACK 5

This processor can not be read in circuit. Processor should be removed and put to the adapter.
Please be careful with the direction and processor pins should be clean.
81
Module 2:
VW, Seat immo2 - Siemens immobox
TMS370C702 28pin, 256 Bytes

VW,SEAT
ID: 42
MCU Pack : PACK 5

82
Module 5:
Opel immo1 - Siemens immobox
Motorola MC68HC05B6(F10V-B91T-D33J) 52pin, 256 Bytes

OPEL
ID: 33
MCU Pack : PACK 3

This processor can not be read in circuit. Processor should be removed and put to the clip. Please be
careful with the direction and processor pins should be clean.
83
Module 7:
Honda, Rover - Valeo immobox

Honda,Rover600
ID: 33
MCU Pack : PACK 3

This processor can not be read in circuit. Processor should be removed and put to the clip. Please be
careful with the direction and processor pins should be clean.
84
Module 8:
Fiat, Lancia - imm001.01 magneti marelli immobox
Motorola MC68HC05E6(F82B-G72G) 28pin, 160 Bytes

Fiat,Lancia
ID: 11
MCU Pack : PACK 1
This module can be read in circuit with pack 1 clip. To read the chip in circuit first pin of the
processor should be disconnected from the circuit board. To disconnect the pin, the resistor(473 is
written on it) should be removed from the circuit board, this resistor is located at the back side of
the circuit board. Another option is to cut the line which continues through this resistor. Do not
forget to put back the resistor, or connect the way which is cut, after completing the read process.
Processor can be read by removing it from the circuit board and putting to the reader clip as well.
Important: While putting the processor to the reader clip, Zed-Prog should be off. Be careful with
the direction of the processor. Processor pins should be clean.
See the figure below to see disconnecting the resistor from the board for in circuit reading.
85
86
Module 9:
Fiat, Lancia - imm110.01 magneti marelli immobox
Motorola MC68HC908AZ32(J66D) 64pin, 512 Bytes

Fiat,Lancia
ID: 11
MCU Pack : PACK 6

This processor can not be read in circuit. Processor should be removed and soldered the adapter.
Please be careful with the direction of MCU.
87
Module 10:
Mercedes Sprinter, Vito, Vw volt - Temic immobox
Motorola MC68HC05X16(D62J)/AZ32(L52H-J66D) 64 pin, 256/512 Bytes

Mercedes Sprinter,Vito,vw Volt
ID: 12
MCU Pack : PACK 6

88
Module 11:
Fiat, Alfa Romeo, Lancia - magneti marelli BSI
Motorola MC68HC912DG128(3K91D)/MC9S12DP256(1K79X) 112pin, 2048/4096 Bytes

Doblo, Albea, Alfa 156
ID: 48
MCU Pack : PACK 4

This module can be read in circuit with pack 4 clip. This module has three types board which shown
below. Cutting the indicated way and soldering the cables to the right points are very important.
89
Type-1 Board:
90
Type-1 Connection:
91
Type-2 Board:
92
Type-2 Connection:
93
Type-3 Board:
94
Type-3 Connection:
95
Module 13:
VW,Skoda,Seat immo1 - Siemens immobox

VW,Skoda,Seat
ID: 33
MCU Pack : PACK 3

This processor can be read in circuit. Be careful with the direction of the processor. The processor
pins should be clean.
96
Module 25:
Renault Laguna2 - Sagem UCH

Laguna2
ID: 46
Transponder Type: Laguna card
Calculated pin code can be used to programme the card with a diagnostic tool.
97
Module 27:
Renault Megane2, Scenic2 - Siemens UCH

Megane2
ID: 46
Transponder Type: Megane card
Calculated pin code can be used to programme the card with a diagnostic tool.
98
Module 30:
BMW, Range Rover, Mini Cooper - EWS1
MC68HC11EA9(2D47J)(0D46J) 52pin, 512 Bytes

BMW,Range Rover,Mini Cooper
ID: 33 Rolling
Transponder Type: Blank PCF7930/35 or remote key
MCU Pack : PACK 2

“2D47J” mask numbers processors should not be read by this adapter. Otherwise the information in
processor can be erased.
99
Module 31:

ID: 33 Rolling
MCU Pack : PACK 2

100
Module 32:

ID: 33 Rolling
MCU Pack : PACK 2

This module can be read in circuit with pack 2 clip. The processor need to be cleaned very well,
before reading. Be careful with the direction of the MCUs. This processor can also be read with
chip removal.
Read in Circuit: Read with Chip Removal:
101
Module 40:
Nissan, Subaru - Siemens immobox
Motorola MC68HC05B6(F10V-B91T-D33J), 52pin, 256 Bytes

Nissan, Subaru
ID: 33
MCU Pack : PACK 3

This processor CAN NOT BE READ IN CIRCUIT. Processor should be removed from the circuit
board and should be put to the reader clip. Be careful with the direction of the processor. Processor
pins should be clear.
102
Module 41:
Peugeot motorbike - Marelli immobox
Motorola MC68HC05B16(0D60J)-MC68HC05X16(0D62J), 64pin, 256 Bytes

Peugeot bike, Piaggio bike
ID: 11
MCU Pack : PACK 6

103
Module 44:
Peugeot - Siemens BSI
Motorola MC68HC05B16(F10V-B91T-D33J-D60J), 52pin, 256 Bytes

206
ID: 45
MCU Pack : PACK 3

This processor CAN NOT BE READ IN CIRCUIT. Processor should be removed from the circuit
board and should be put to the reader clip. Be careful with the direction of the processor. Processor
pins should be clear.
104
Module 47:
Chrysler, Jeep, Dodge - SKIM immobox
Motorola MC68HC08AB16A(L72A)/MC68HC08AZ32(J66D)/24c02, 64pin/64pin/8pin,

512/512/256 Bytes
Chrysler,Jeep,Dodge
ID: 64
Programmed transponder will start the vehicle.
MCU Pack : PACK 6

105
Module 48:
Mazda, Ford - Temic immobox
Motorola MC68HC705P3(1F75B), 28pin, 128 Bytes

323, Probe
ID: 12
106
Module 50:
Peugeot, Fiat, Citroen - immobox
Motorola MC68HC05E6(F82B-G72G), 28pin, 160 Bytes

306
ID: 33
MCU Pack : PACK 1
This processor can be read in circuit. To read the chip in circuit, first pin of the processor should be
disconnected from the circuit board. To disconnect first pin of the processor from the circuit board,
the line to be cut is shown in figure below. Do not forget to reconnect the line after completing the
process.
The processor can be read by removing it from circuit board and putting to the reader clip.
Important: While putting the processor to the reader clip Zed-Prog should be off. Be careful with
the direction of the processor. Processor pins should be clean.
See the figure below to see which line should be cut from the circuit board to read the processor in
circuit.
107
108
Module 51:
Toyota - immobox
Motorola MC68HC05E6(F82B-G72G), 28pin, 160 Bytes

Avensis
ID: 4C
Mcu Pack : PACK 1

The processor should be removed from circuit board, removed processor should be put to the reader
clip.
Important: While reading the processor Zed-Prog should be off. Be careful with the direction of
the processor. Processor pins should be clean.
109
Module 52:
Nissan - Siemens immobox(NATS-4)
TMS, 44pin, 256 Bytes

Nissan
ID: 41
110
Module 54:
Daewoo - immobox
Motorola MC68HC05B6(F10V-B91T-D33J-D60J), 52pin, 256 Bytes

Daewoo
ID: 13
Mcu Pack : PACK 3

This processor can not be read in circuit. The processor should be removed and put to the reader
clip. Be careful with the direction of the processor. Processor pins should be clear.
111
Module 56:
Renault - Siemens immobox -98
Motorola MC68HC05B16(D54J)/MC68HC05B6(B83T), 52pin, 256/256 Bytes

Megane
ID: 33
Mcu Pack : PACK 3

This processor can not be read in circuit. Processor should be removed from circuit board and put to
the reader clip. Be careful with the direction of the processor. Processor pins should be clear.
112
Module 58:
Ford - immobox
TMS370C702, 28pin, 256 Bytes

Transit, KA
ID: 4C
MCU Pack : PACK 5

113
Module 59:
Ford - immobox
TMS370C702, 28pin, 256 Bytes

Transit,Mondeo
ID: 4C
MCU Pack : PACK 5

114
Module 60:
Mazda - Lucas immobox
Motorola MC68HC05B6(F10V-B91T-D33J-D60J) 52pin, 256 Bytes

626
ID: 33
Mcu Pack : PACK 3

This module can not be read in circuit. The processor should be removed from circuit board and put
to the reader clip. Be careful with the direction of the processor. Processor pins should be clear.
115
Module 61:
Ford - Visteon Dashboard
Motorola MC9s12H256(1K78X), 112pin, 4096 Bytes

Focus, C-Max
ID: 63
116
Module 64:
Fiat, Lancia - IMM100.01 Magneti marelli immobox
Motorola MC68HC908AZ32(J66D), 64pin, 512 Bytes

Idea,Multipla,Lybra
ID: 48
MCU Pack : PACK 6

117
Module 65:
Fiat - Siemens BSI
Motorola MC9S12DG128(L40K)/MC68HC912DG128(3K91D)/MC9S12DP256(1K79X)
112pin, 2048/2048/4096 Bytes
Panda
ID: 46
Programmed transponder should be programmed into the vehcile using a diagnostic tool with
118
Module 66:
Renault - Siemens UCH
Motorola MC68HC705B32(G96A-G41V-D59J), 52pin, 256 Bytes

Megane,Scenic
ID: 60-64
Programmed transponder awill start the vehicle
Mcu Pack : PACK 3

This processor can not be read in circuit. Processor should be removed from the circuit board and
put to the reader clip. Be careful with the direction of the processor. Processor pins should be clear.
119
Module 68:
Motorola MC9S12D64(2L86D), 80pin, 1024 Bytes

ID: 33 Rolling
120
Modül 82:
Chery - immobox
● MC68HC908AB16A 64pin, 512 Bytes

● Fora, A1, A5, Elera, QQ, Tiggo
● ID: 40
MCU Pack : PACK 6

121
Modül 84:
Renault - Valeo BSI
● Motorola MC68HC908AZ32, 64pin, 512 Bytes

● Espace
● ID: 33
● Transponder Type: T5 or PCF7930/31/35
MCU Pack : PACK 6

122
Modül 85:
Toyota - Valeo immobox
● Motorola MC68HC05E6, 28pin, 160 Bytes

● Avensis, Corolla
● ID: 60
Mcu Pack : PACK 1

The processor should be removed from circuit board, removed processor should be put to the reader
clip.
Important: While reading the processor Zed-Prog should be off. Be careful with the direction of
the processor. Processor pins should be clean.
123
Modül 86:
Nissan - Siemens immobox(NATS-5)
● TMS, 44pin, 256 Bytes

● Nissan
● ID: 60
124
Modül 90:
Chevrolet - Siemens UCH
● Motorola MC68HC705B32(G96A-G41V-D59J), 52pin, 256 Bytes

● Epica, Evenda
● ID: 60
Mcu Pack : PACK 3

This module can not be read in circuit. The processor should be removed from circuit board and put
to the reader clip. Be careful with the direction of the processor. Processor pins should be clear.
125
APPENDIX:
Some of Motorola processors and matching mask numbers are given as below.
Motorola processors and Mask Numbers:

A75H MC68HC811A2
B16B MC68HC805C4
B19C MC68HC811E2
B36T MC68HC805B6
B46E MC68HC11A8
B60R MC68HC11E9
B65H MC68HC11A8
B76T MC68HC11A8
B83T MC68HC05B6
B84N MC68HC11A1
B91T MC68HC05B6
B95T MC68HC11A8
B96D MC68HC11A8
B96T MC68HC05C8
C11W MC68HC11A1
C13W MC68HC11L6
C14H MC68HC05B6
C16J MC68HC811E2
C16W MC68HC705C8
C27B MC68HC11E9
C28M MC68HC11G5FN1
C35N MC68HC05B16
C40H MC68HC05J1
C45A XC68HC711D3
C47M MC68HC711E9
C83W MC68HC11E9
C85W XC68HC711L6
C91F MC68HC11E1
C92K MC68HC05C12A
C95K MC68HC05E0
C96N MC68HC11A1
D20J MC68HC05B16
D26E MC68HC11A8
126
D28J MC68HC705B16
D33J MC68HC05B6
D35E MC68HC11E9
D37R MC68HC05C12A
D40J MC68HC705B32
D40J MC68HC705X32
D41V XC68HC705BE12
D45R MC68HC11ED0
D46J MC68HC11A8
D47J MC68HC11EA9
D48J MC68HC11PH8
D53J MC68HC05X32
D54E MC68HC705P9
D54J MC68HC05B16
D58J MC68HC11PA8
D59J MC68HC705B32
D59J MC68HC705X32
D60J MC68HC05B16
D61N XC68HC711KA4
D62J MC68HC05X16
D64J MC68HC(7)11P2
D67F MC68HC711K4
D69F PC68HC711N4
D69J MC68HC05X32
D82R MC68HC11E9
D86B MC68HC705J2
D99H MC68HC711P2
E11P MC68HC16Z2
E20T MC68HC705C4A
E20Y MC68HC705P6CP
E22B MC68HC11E20
E28B MC68HC11E9
E31M MC68HC705K1
E32B MC68HC05C8
E41C PC68HC916Y1
E50H MC68HC05B16
E53M MC68HC711P2
E54F MC68HC16Z1
127
E57S MC68HC11KA4
E59B MC68HC11KA4
E61R MC68HC705C8
E61W MC68HC705F8
E62H MC68HC11K4
E62W MC68HC16Z1
E69W MC68HC16Z1
E74J MC68HC11P2
E75J MC68HC11K4
E78C MC68HC05J1A
E79R MC68HC705C8A
E82K MC68HC11E20
E88N MC68HC711KA2
F10V MC68HC05B6
F10W MC68HC705SR3
F11N MC68HC11L6
F12A MC68HC05J1A
F17V MC68HC11F1B4
F23H MC68HC05P4A
F33P PC68HC16V1
F37E MC68HC11F1
F41E MC68HC05L28
F41J MC68HC05L28
F44T MC68HC705J1A
F49K MC68HC705C8A
F52E MC68HC11E32
F53E MC68HC11KG4
F56K MC68HC705B16
F62A MC68HC05C8
F62J MC68HC05B16
F63J MC68HC705C9A
F67V MC68HC16Z1
F68K MC68HC912D60
F71L MC68HC05C8 or 705C8
F73K MC68HC912D60
F73T MC68HC16Z1
F88B MC68HC705X4
F92J MC68HCP11A1
128
F96J MC68HC11E9
F97J MC68HC11E9
F98Y MC68HC708AS48
G10V MC68HC(7)11P2
G11D MC68HC16Z2
G23V MC68HC08AZ32
G26C MC68HC16Z3
G28F MC68HC05B16
G32V MC68HC11KG4
G33P XC68HC705P6ACP
G35N MC68HC05B16
G39Y MC68HC08AS20
G40G MC68HC805K3
G41V MC68HC705B32
G47V MC68HC705X32
G49V MC68HC08AZ32
G53F MC68HC05J1A
G54K MC68HC05TB
G58F MC68HC705J1A
G59F MC68HC711E20
G62K MC68HC708AS48
G63P MC68HC705J1A
G78M MC68HC705V12
G96A MC68HC705B32
G96Y MC68HC705V12
H14A MC68HC708AS48
H19S MC68HC711E20
H24M MC68HC05V12
H42K MC68HC705C8A
H48T XC68CM16Z1
H50W MC68HC711E9
H52P MC68HC705V12
H54T MC68HC12BE32
H55B MC68HC705BD9
H55F MC68HC805K3
H55W MC68HC912DG128
H56A MC68HC08AZ32
H57A MC68HC05H12
129
H62A MC68HC908AS60 or AZ60
H62P MC68HC908AT32
H70H MC68HC705SJ7
H72J MC68HC705C8A
H86A MC68HC711KG2
H86X MC68HC(7)11KG2
H91F MC68HC912B32
H94K MC68HC08AS20
H95B MC68HC(7)11K4
H96J MC68HC05JJ6
J20X MC68HC908GP32
J26R MC68HC08AS20
J27F MC68HC08AS32
J34P MC68HC12BE32
J35D MC68HC08AZ60
J38M MC68HC12BE32
J54E MC68HC912B32
J56W MMC2001 or 2003
J61D MC68HC908AS60
J64Y MC68HC912B32
J66D MC68HC08AZ32
J66H MC68HC705J1A
J73R MC68HC705C8A
J74Y MC68HC908AS60
J79Y MC68HC908BD48
J88Y MC68HC908JK3
K00J MC68HC908RK2
K02S MC68HC05P4A
K03B MC68HC705C9A
K05W MC68HC711D3
K07E MC68HC11KS2
K08B MC68HC705C8A
K08S MC68HC908GP32
K08W MC68HC711KS2
K11N MC68HC908LD64
K13J MC68HC12D60
K20C MC68HC705B16
K20R MC68HC05PV8A
130
K22K MMC2001 or 2003
K25E MC68HC912BC32
K36N MC9S12DP256
K38K M68HC912D60
K39K MC68HC908SR12
K45D MC68HC908KX8
K45H MC68HC908JB8
K50E MC68HC912DG128
K54X MC68HC711K4
K56G MC68HC908AB32
K59D MC68HC08JB8
K59H PC527283MFU
K75F MC68HC912D60
K78X MC9S12H256
K79X MC9S12DP256 or A256
K81H MC68HC711E9
K85K MC68HC908AZ60A or AS60A
K85V MC68HC908AZ60A
K91D MC68HC912DG128
L02H M68HC912D60
L05H M68HC912DT128
L06H MC68HC908SR12
L09H MC68HC908KX8 or KX2
L45J MC9S12C32
L51J M68HC912D60
L52H MC68HC08AZ32A
L53J MC68HC908GR8
L54J MC68HC908MR32 or 16
L69J MC68HC908QT1-4 or QY1-4
L85D MC9S12A128 or DTB128
L87J MC68HC908AZ60A or AS60A
131

Zedprogmanual PDF

Uploaded by

Zedprogmanual PDF

Uploaded by

ZED–PROG

İSTANBUL ELEKTRONİK ANAHTAR

Istanbul, May 2010

1. Zed-Prog and Hardware Features.............................................................................3

4. Loading dump file to Pc software using Zed-Prog...................................................9

5. EEPROM and MCU Applications List...................................................................12

6. Zed – Prog EEPROM and MCU Packs.................................................................15

7. Zed – Prog EEPROM and MCU Adapters............................................................17

8. Zed-Prog EEPROM Applications...........................................................................22

9. Zed-Prog Processor Applications............................................................................80

Figure 2.1 Zed-Prog & Zed-Bull Connection

Figure 2.2 Connecting Clip to the chip

Figure 2.3 Choosing chip type in Zed-BULL menu

Figure 3.1 Zed-Prog power in and usb connection

Settings >> Update >> Module update

Figure 3.3 Update steps

Figure 3.4 Update status screen

After update process is successful, following warning screen will appear.

Figure 3.5 Update result information screen

Figure 4.1 Zed-Prog Power in jack and usb connection

Extended Functions >> Zed-PROG

Figure 4.2 Choosing Zed-Prog from Zed-Bull Pc Software

Figure 4.3 Zed-Prog Window

Figure 4.4 Zed-Prog window after successful read

Figure 4.5 Save file options

EEPROM PACK(STANDART PACKAGE):

Module 8 : Fiat, Lancia – Magnetti Marelli -> Bravo(1998-2001), Marea(1998-), Palio(-1999)-

Module 50: Peugeot,Fiat, Citroen -> 306, Expert, Ranch-Read incircuit

Module 51: Toyota -> Avensis-Read with chip removal

Module 85: Toyota - Valeo immobox-Read with chip removal

Module 32: BMW, Range Rover, Mini Cooper -EWS3-Read incircuit

Module 13: VW, Skoda,Seat immo1-Siemens -> Caddy(-1998,Golf 3, Passat 3, Polo3(-1998),

Module 54: Daewoo -> Espero, Lanos(-2002), Leganza(-2000), Matiz(-2001), Nexia,

Module 90: Chevrolet - Siemens UCH - Read with chip removal

Module 25: Renault Laguna2 - Sagem UCH

Module 27: Renault Megane2, Scenic2 - Siemens UCH

Module 61: Ford - Visteon Dashboard

Module 65: Fiat - Siemens BSI

Module 68: BMW, Range Rover, Mini Cooper - EWS4

Module 2: VW, Seat immo2 - Siemens immobox-Read with chip removal

Module 52: Nissan - Siemens immobox(NATS-4)

Module 58: Ford - immobox-Read with chip removal

Module 59: Ford - immobox-Read with chip removal

Module 86 : Nissan - Siemens immobox(NATS-5)

Module 41: Peugeot motorbike - Marelli immobox-Read with chip removal

Module 82: Chery – immobox-Read with chip removal

Module 84: Renault - Valeo BSI-Read with chip removal

General Purpose EEPROM Adapter:

Be careful with the direction of the MCUs:

24c04 8pins, 512 Bytes

93c46 8pins, 128 Bytes

93c46 8pins, 128 Bytes

93lc56b 8pins, 256 Bytes

95c160/95c320 8pin(SSOP), 2048/4096 Bytes

93lc66 8 pin(dip), 512 Bytes

93c46/93c56 8pin, 128/256 Bytes

93c66 8pin, 512 Bytes

93c66b 8pin, 512 Bytes

93c66 8pin, 512 Bytes

93c56/93c66 8pin, 256/512 Bytes

24c02/25020/25040 8pin, 256/256/512 Bytes

95080/93c86/25080 8pin, 1024/2048/1024 Bytes

24c04 8pin, 512 Bytes

93C56/93c66/93c86 8pin, 256/512/2048 Bytes

93c56 8pin, 256 Bytes

93c56 8pin, 256 Bytes

93c56 8pin, 256 Bytes

93c46 8pin, 128 Bytes

93c46 8pin, 128 Bytes

93lc66 8pin, 512 Bytes

25080/95080 8pin, 1024/1024 Bytes

93c46 8pin, 128 Bytes

93c56 8pin, 256 Bytes

93c66, 8pin, 512 Bytes

93c66, 8pin, 512 Bytes

93c46, 8pin, 128 Bytes