SECURE E LEARNING USING DATA MINING TECHNIQUES.

ABSTRACT

Education through the internet, network and a computer is E-learning. This helps in
network enabled transfer of skills and knowledge. E-learning refers to use of electronic
applications and processes to learn. This is a web based application which can be hosted
in the website of any training institute. The students will be able to register online, read
the course material and write online exam.

The objectives of this project are

• To provide distance learning
• To make it convenient for people who have other commitments
• Cost reduction
• Reduced paper work
• Computer evaluated tests
Existing System

Given a set of existing neighborhoods, we would like to select an instance such

that knowing its neighborhood will allow us to gain maximal information about the
underlying clustering structure of the data. Our method is based on the following key
observation. If we can predict with high certainty to which neighborhood an instance
belongs based on our current understanding of the clustering structure, querying about
that instance will not lead to any gain of information. Similar observations have been
used to motivate the widely used uncertainty-based sampling principle for active learning
of classifiers.

To apply uncertainty-based sampling for selecting the most informative instance,

we need to address a number of important issues. First, how can we reliably measure the
uncertainty of a data point? Second, we can only ask pair-wise queries, and it may take
multiple queries to resolve the uncertainty about a data point. How can we take this into
consideration in our decision. Below we present our approach for dealing with these two
issues.

Proposed System

In this work, we consider the semi-supervised clustering algorithm as a black-box

and any existing algorithm can be used here. The key question we aim to answer is how
to select the “most informative from clustered documents” instance to query against; the
design of the function is most Informative.

Instead, our approach estimates the probability of each instance belonging to each
neighborhood using a similarity-based approach where the similarity measure is
discriminatively learned under the supervision of the current clustering solution. That is,
for instances belonging to different clusters (according to the current clustering of the
documents). The documents clustered can’t be removed from the cluster which makes
searching the based on keyword would be efficiency without entering exact keyword for
searching.

1. Description of Project

The system makes it possible for the students to access all learning materials
from home and interact with the teachers and clarify their doubts on different subjects.
They can also assess themselves through online tests.

The system provides a vast digital library for providing learning materials for the
users. The students can access notes on any subject. Notes are available for the students
of all branches and semesters. Students can download all notes, if they want to.

Users can upload videos of lectures into the site. These videos can be viewed by
all registered users of the system. Moreover, powerpoint presentations on all topics can
be uploaded in to the system.

The system provides online tests on all subjects through which the students can
get a regular assessment of themselves. The students can chat with the teachers if they
are online and clarify their doubts. If the teachers are offline, the students can mail them.
 1. Introduction-

1.1 Rationale -

E-Learning has now been adopted and used by various companies to inform & educate
both their employees and customers. E-learning services have evolved since computers
were first used in education. There is a trend to move towards blended learning services,
where computer-based activities are integrated with practical or classroom-based
situations.

1.2 Problem defination and proposed solutions -

Shows educators and trainers how to adapt teaching methods and materials to make use
of the Internet. Including a framework showing how to apply Internet technology
progressively as skills and confidence grow, the project demonstrates the route from
adapting materials to developing a virtual course.

Nowadays, when people are not having time to visit an institute. Therefore, the software
is designed to provide the education through Internet. The project “E – LEARNING”
helps the common world in any field they are to get the knowledge what they want even
sitting at there places. This helps them to spare time in their busy schedule and save their
time during transportation.
The proposed system includes the following:

1.Digital Library
A Digital Library that provides all the learning materials for the students.It should
include notes and questions for each topic.

2.Videos
Videos of lectures can be uploaded into the system.This can be viewed by all registered
users.

3.Power point presentations

Ppts of lectures can be uploaded into the system.This can be viewed by all registered
users.

4.Chatting
The students can chat with the teachers and clarify their doubts.

5.Forum
The students can discuss their doubts with the teachers.

6.Online tests
There are online tests on all subjects for the students to assess themselves regularly
1.3 System Synthesis –

The proposed E-Learning system has the following features

 Only registered students and teachers can access the system.
 Students can view and download all learning materials (notes, ppts, pdf, books).
 Students can take online tests to test their knowledge on different topics. Results
of these tests are saved and can be retrieved when required.
 Teachers can upload all learning materials.
 Teachers can view the test records of any student.
 All users can make use of discussion forum to exchange their ideas on various
topics.
SOFTWARE REQUIREMENTS

Web Server : Apache Tomcat

Web Client : Mozilla Firefox
Tools : Dream Weaver, Net Beans
Front End : PHP
Language : Java
Back End : My SQL
Internet Standard : HTTP
Operating System : Windows 2000 Server

HARDWARE REQUIREMENTS

Processor : Pentium IV
Operating system : Windows 2000
Memory : 512 MB
Hard Disk : 40 GB
Drive : DVD-ROM
Software Environment

Java Technology

Java technology is both a programming language and a platform.

The Java Programming Language

The Java programming language is a high-level language that can be characterized by all
of the following buzzwords:

 Simple
 Architecture neutral
 Object oriented
 Portable
 Distributed
 High performance
 Interpreted
 Multithreaded
 Robust
 Dynamic
 Secure

With most programming languages, you either compile or interpret a program so that you
can run it on your computer. The Java programming language is unusual in that a
program is both compiled and interpreted. With the compiler, first you translate a
program into an intermediate language called Java byte codes —the platform-
independent codes interpreted by the interpreter on the Java platform. The interpreter
parses and runs each Java byte code instruction on the computer. Compilation happens
just once; interpretation occurs each time the program is executed. The following figure
illustrates how this works.
You can think of Java byte codes as the machine code instructions for the Java Virtual
Machine (Java VM). Every Java interpreter, whether it’s a development tool or a Web
browser that can run applets, is an implementation of the Java VM. Java byte codes help
make “write once, run anywhere” possible. You can compile your program into byte
codes on any platform that has a Java compiler. The byte codes can then be run on any
implementation of the Java VM. That means that as long as a computer has a Java VM,
the same program written in the Java programming language can run on Windows 2000,
a Solaris workstation, or on an iMac.

The Java Platform

A platform is the hardware or software environment in which a program runs. We’ve
already mentioned some of the most popular platforms like Windows 2000, Linux,
Solaris, and MacOS. Most platforms can be described as a combination of the operating
system and hardware. The Java platform differs from most other platforms in that it’s a
software-only platform that runs on top of other hardware-based platforms.
 The Java platform has two components:
 The Java Virtual Machine (Java VM)
 The Java Application Programming Interface (Java API)
You’ve already been introduced to the Java VM. It’s the base for the Java platform and is
ported onto various hardware-based platforms.
The Java API is a large collection of ready-made software components that provide many
useful capabilities, such as graphical user interface (GUI) widgets. The Java API is
grouped into libraries of related classes and interfaces; these libraries are known as
packages. The next section, What Can Java Technology Do? Highlights what
functionality some of the packages in the Java API provide.
The following figure depicts a program that’s running on the Java platform. As the figure
shows, the Java API and the virtual machine insulate the program from the hardware.

Native code is code that after you compile it, the compiled code runs on a specific
hardware platform. As a platform-independent environment, the Java platform can be a
bit slower than native code. However, smart compilers, well-tuned interpreters, and just-
in-time byte code compilers can bring performance close to that of native code without
threatening portability.
What Can Java Technology Do?
The most common types of programs written in the Java programming language are
applets and applications. If you’ve surfed the Web, you’re probably already familiar with
applets. An applet is a program that adheres to certain conventions that allow it to run
within a Java-enabled browser.
However, the Java programming language is not just for writing cute, entertaining applets
for the Web. The general-purpose, high-level Java programming language is also a
powerful software platform. Using the generous API, you can write many types of
programs.
An application is a standalone program that runs directly on the Java platform. A special
kind of application known as a server serves and supports clients on a network. Examples
of servers are Web servers, proxy servers, mail servers, and print servers. Another
specialized program is a servlet. A servlet can almost be thought of as an applet that runs
on the server side. Java Servlets are a popular choice for building interactive web
applications, replacing the use of CGI scripts. Servlets are similar to applets in that they
are runtime extensions of applications. Instead of working in browsers, though, servlets
run within Java Web servers, configuring or tailoring the server.
How does the API support all these kinds of programs? It does so with packages of
software components that provides a wide range of functionality. Every full
implementation of the Java platform gives you the following features:
 The essentials: Objects, strings, threads, numbers, input and output, data
structures, system properties, date and time, and so on.
 Applets: The set of conventions used by applets.
 Networking: URLs, TCP (Transmission Control Protocol), UDP (User
Data gram Protocol) sockets, and IP (Internet Protocol) addresses.
 Internationalization: Help for writing programs that can be localized for
users worldwide. Programs can automatically adapt to specific locales and
be displayed in the appropriate language.
 Security: Both low level and high level, including electronic signatures,
public and private key management, access control, and certificates.
 Software components: Known as JavaBeansTM, can plug into existing
component architectures.
 Object serialization: Allows lightweight persistence and communication
via Remote Method Invocation (RMI).
 Java Database Connectivity (JDBCTM): Provides uniform access to a
wide range of relational databases.
The Java platform also has APIs for 2D and 3D graphics, accessibility, servers,
collaboration, telephony, speech, animation, and more. The following figure
depicts what is included in the Java 2 SDK.
How Will Java Technology Change My Life?
We can’t promise you fame, fortune, or even a job if you learn the Java programming
language. Still, it is likely to make your programs better and requires less effort than
other languages. We believe that Java technology will help you do the following:
 Get started quickly: Although the Java programming language is a
powerful object-oriented language, it’s easy to learn, especially for
programmers already familiar with C or C++.
 Write less code: Comparisons of program metrics (class counts, method
counts, and so on) suggest that a program written in the Java programming
language can be four times smaller than the same program in C++.
 Write better code: The Java programming language encourages good
coding practices, and its garbage collection helps you avoid memory leaks.
Its object orientation, its JavaBeans component architecture, and its wide-
ranging, easily extendible API let you reuse other people’s tested code and
introduce fewer bugs.
 Develop programs more quickly: Your development time may be as
much as twice as fast versus writing the same program in C++. Why? You
write fewer lines of code and it is a simpler programming language than
C++.
 Avoid platform dependencies with 100% Pure Java: You can keep
your program portable by avoiding the use of libraries written in other
languages. The 100% Pure JavaTM Product Certification Program has a
 repository of historical process manuals, white papers, brochures, and
similar materials online.
 Write once, run anywhere: Because 100% Pure Java programs are
compiled into machine-independent byte codes, they run consistently on
any Java platform.
 Distribute software more easily: You can upgrade applets easily from a
central server. Applets take advantage of the feature of allowing new
classes to be loaded “on the fly,” without recompiling the entire program.
ODBC
Microsoft Open Database Connectivity (ODBC) is a standard programming interface for
application developers and database systems providers. Before ODBC became a de facto
standard for Windows programs to interface with database systems, programmers had to
use proprietary languages for each database they wanted to connect to. Now, ODBC has
made the choice of the database system almost irrelevant from a coding perspective,
which is as it should be. Application developers have much more important things to
worry about than the syntax that is needed to port their program from one database to
another when business needs suddenly change.
Through the ODBC Administrator in Control Panel, you can specify the particular
database that is associated with a data source that an ODBC application program is
written to use. Think of an ODBC data source as a door with a name on it. Each door will
lead you to a particular database. For example, the data source named Sales Figures
might be a SQL Server database, whereas the Accounts Payable data source could refer
to an Access database. The physical database referred to by a data source can reside
anywhere on the LAN.
The ODBC system files are not installed on your system by Windows 95. Rather, they
are installed when you setup a separate database application, such as SQL Server Client
or Visual Basic 4.0. When the ODBC icon is installed in Control Panel, it uses a file
called ODBCINST.DLL. It is also possible to administer your ODBC data sources
through a stand-alone program called ODBCADM.EXE. There is a 16-bit and a 32-bit
version of this program and each maintains a separate list of ODBC data sources.
From a programming perspective, the beauty of ODBC is that the application can be
written to use the same set of function calls to interface with any data source, regardless
of the database vendor. The source code of the application doesn’t change whether it
talks to Oracle or SQL Server. We only mention these two as an example. There are
ODBC drivers available for several dozen popular database systems. Even Excel
spreadsheets and plain text files can be turned into data sources. The operating system
uses the Registry information written by ODBC Administrator to determine which low-
level ODBC drivers are needed to talk to the data source (such as the interface to Oracle
or SQL Server). The loading of the ODBC drivers is transparent to the ODBC application
program. In a client/server environment, the ODBC API even handles many of the
network issues for the application programmer.
The advantages of this scheme are so numerous that you are probably thinking there must
be some catch. The only disadvantage of ODBC is that it isn’t as efficient as talking
directly to the native database interface. ODBC has had many detractors make the charge
that it is too slow. Microsoft has always claimed that the critical factor in performance is
the quality of the driver software that is used. In our humble opinion, this is true. The
availability of good ODBC drivers has improved a great deal recently. And anyway, the
criticism about performance is somewhat analogous to those who said that compilers
would never match the speed of pure assembly language. Maybe not, but the compiler (or
ODBC) gives you the opportunity to write cleaner programs, which means you finish
sooner. Meanwhile, computers get faster every year.

JDBC
In an effort to set an independent database standard API for Java; Sun Microsystems
developed Java Database Connectivity, or JDBC. JDBC offers a generic SQL database
access mechanism that provides a consistent interface to a variety of RDBMSs. This
consistent interface is achieved through the use of “plug-in” database connectivity
modules, or drivers. If a database vendor wishes to have JDBC support, he or she must
provide the driver for each platform that the database and Java run on.
To gain a wider acceptance of JDBC, Sun based JDBC’s framework on ODBC. As you
discovered earlier in this chapter, ODBC has widespread support on a variety of
platforms. Basing JDBC on ODBC will allow vendors to bring JDBC drivers to market
much faster than developing a completely new connectivity solution.
JDBC was announced in March of 1996. It was released for a 90 day public review that
ended June 8, 1996. Because of user input, the final JDBC v1.0 specification was
released soon after.
The remainder of this section will cover enough information about JDBC for you to know
what it is about and how to use it effectively. This is by no means a complete overview of
JDBC. That would fill an entire book.

JDBC Goals
Few software packages are designed without goals in mind. JDBC is one that, because of
its many goals, drove the development of the API. These goals, in conjunction with early
reviewer feedback, have finalized the JDBC class library into a solid framework for
building database applications in Java.
The goals that were set for JDBC are important. They will give you some insight as to
why certain classes and functionalities behave the way they do. The eight design goals
for JDBC are as follows:

1. SQL Level API

The designers felt that their main goal was to define a SQL interface for Java.
Although not the lowest database interface level possible, it is at a low enough level
for higher-level tools and APIs to be created. Conversely, it is at a high enough level
for application programmers to use it confidently. Attaining this goal allows for
future tool vendors to “generate” JDBC code and to hide many of JDBC’s
complexities from the end user.
2. SQL Conformance
SQL syntax varies as you move from database vendor to database vendor. In an effort
to support a wide variety of vendors, JDBC will allow any query statement to be
passed through it to the underlying database driver. This allows the connectivity
module to handle non-standard functionality in a manner that is suitable for its users.
3. JDBC must be implemental on top of common database interfaces
 The JDBC SQL API must “sit” on top of other common SQL level APIs. This
goal allows JDBC to use existing ODBC level drivers by the use of a software
interface. This interface would translate JDBC calls to ODBC and vice versa.
4. Provide a Java interface that is consistent with the rest of the Java system
Because of Java’s acceptance in the user community thus far, the designers feel
that
they should not stray from the current design of the core Java system.
5. Keep it simple
This goal probably appears in all software design goal listings. JDBC is no
exception. Sun felt that the design of JDBC should be very simple, allowing for only
one method of completing a task per mechanism. Allowing duplicate functionality
only serves to confuse the users of the API.
6. Use strong, static typing wherever possible
Strong typing allows for more error checking to be done at compile time; also,
less error appear at runtime.
7. Keep the common cases simple
Because more often than not, the usual SQL calls used by the programmer are
simple SELECT’s, INSERT’s, DELETE’s and UPDATE’s, these queries should be
simple to perform with JDBC. However, more complex SQL statements should also
be possible.

Finally we decided to proceed the implementation using Java Networking.

And for dynamically updating the cache table we go for MS Access database.

Java ha two things: a programming language and a platform.

Java is a high-level programming language that is all of the
following

Simple Architecture-neutral
 Object-oriented Portable
Distributed High-performance
Interpreted multithreaded
Robust Dynamic
Secure

Java is also unusual in that each Java program is both compiled and
interpreted. With a compile you translate a Java program into an intermediate
language called Java byte codes the platform-independent code instruction is
passed and run on the computer.

Compilation happens just once; interpretation occurs each time the program is
executed. The figure illustrates how this works.

Java Interpreter
Program

Compilers My Program

You can think of Java byte codes as the machine code instructions for the Java
Virtual Machine (Java VM). Every Java interpreter, whether it’s a Java
development tool or a Web browser that can run Java applets, is an
 implementation of the Java VM. The Java VM can also be implemented in
hardware.

Java byte codes help make “write once, run anywhere” possible. You can
compile your Java program into byte codes on my platform that has a Java
compiler. The byte codes can then be run any implementation of the Java VM.
For example, the same Java program can run Windows NT, Solaris, and
Macintosh.

Networking

TCP/IP stack

The TCP/IP stack is shorter than the OSI one:

TCP is a connection-oriented protocol; UDP (User Datagram Protocol) is a

connectionless protocol.
IP datagram’s

The IP layer provides a connectionless and unreliable delivery system. It considers each
datagram independently of the others. Any association between datagram must be
supplied by the higher layers. The IP layer supplies a checksum that includes its own
header. The header includes the source and destination addresses. The IP layer handles
routing through an Internet. It is also responsible for breaking up large datagram into
smaller ones for transmission and reassembling them at the other end.

UDP

UDP is also connectionless and unreliable. What it adds to IP is a checksum for the
contents of the datagram and port numbers. These are used to give a client/server model -
see later.

TCP

TCP supplies logic to give a reliable connection-oriented protocol above IP. It provides a
virtual circuit that two processes can use to communicate.

Internet addresses

In order to use a service, you must be able to find it. The Internet uses an address scheme
for machines so that they can be located. The address is a 32 bit integer which gives the
IP address. This encodes a network ID and more addressing. The network ID falls into
various classes according to the size of the network address.

Network address

Class A uses 8 bits for the network address with 24 bits left over for other addressing.
Class B uses 16 bit network addressing. Class C uses 24 bit network addressing and class
D uses all 32.
Subnet address

Internally, the UNIX network is divided into sub networks. Building 11 is currently on
one sub network and uses 10-bit addressing, allowing 1024 different hosts.

Host address

8 bits are finally used for host addresses within our subnet. This places a limit of 256
machines that can be on the subnet.

Total address

The 32 bit address is usually written as 4 integers separated by dots.

Port addresses

A service exists on a host, and is identified by its port. This is a 16 bit number. To send a
message to a server, you send it to the port for that service of the host that it is running
on. This is not location transparency! Certain of these ports are "well known".

Sockets

A socket is a data structure maintained by the system to handle network connections. A

socket is created using the call socket. It returns an integer that is like a file descriptor.
In fact, under Windows, this handle can be used with Read File and Write File
functions.

#include <sys/types.h>
#include <sys/socket.h>
int socket(int family, int type, int protocol);

Here "family" will be AF_INET for IP communications, protocol will be

zero, and type will depend on whether TCP or UDP is used. Two processes
wishing to communicate over a network create a socket each. These are similar
to two ends of a pipe - but the actual pipe does not yet exist.

JFree Chart

JFreeChart is a free 100% Java chart library that makes it easy for developers to display
professional quality charts in their applications. JFreeChart's extensive feature set
includes:

A consistent and well-documented API, supporting a wide range of chart types;

A flexible design that is easy to extend, and targets both server-side and client-side
applications;
Support for many output types, including Swing components, image files (including PNG
and JPEG), and vector graphics file formats (including PDF, EPS and SVG);
JFreeChart is "open source" or, more specifically, free software. It is distributed under the
terms of the GNU Lesser General Public Licence (LGPL), which permits use in
proprietary applications.

1. Map Visualizations
Charts showing values that relate to geographical areas. Some examples include: (a)
population density in each state of the United States, (b) income per capita for each
country in Europe, (c) life expectancy in each country of the world. The tasks in this
project include:
Sourcing freely redistributable vector outlines for the countries of the world,
states/provinces in particular countries (USA in particular, but also other areas);
Creating an appropriate dataset interface (plus default implementation), a rendered, and
integrating this with the existing XYPlot class in JFreeChart;
Testing, documenting, testing some more, documenting some more.

2. Time Series Chart Interactivity

Implement a new (to JFreeChart) feature for interactive time series charts --- to display a
separate control that shows a small version of ALL the time series data, with a sliding
"view" rectangle that allows you to select the subset of the time series data to display in
the main chart.

3. Dashboards

There is currently a lot of interest in dashboard displays. Create a flexible dashboard

mechanism that supports a subset of JFreeChart chart types (dials, pies, thermometers,
bars, and lines/time series) that can be delivered easily via both Java Web Start and an
applet.

4. Property Editors

The property editor mechanism in JFreeChart only handles a small subset of the
properties that can be set for charts. Extend (or reimplement) this mechanism to provide
greater end-user control over the appearance of the charts.

Tomcat 6.0 web server

Tomcat is an open source web server developed by Apache Group. Apache Tomcat is the
servlet container that is used in the official Reference Implementation for the Java Servlet
and JavaServer Pages technologies. The Java Servlet and JavaServer Pages specifications
are developed by Sun under the Java Community Process. Web Servers like Apache
Tomcat support only web components while an application server supports web
components as well as business components (BEAs Weblogic, is one of the popular
application server).To develop a web application with jsp/servlet install any web server
like JRun, Tomcat etc to run your application.

Fig Tomcat Webserver

 SYSTEM STUDY

FEASIBILITY STUDY

The feasibility of the project is analyzed in this phase and business proposal is put forth

with a very general plan for the project and some cost estimates. During system analysis

the feasibility study of the proposed system is to be carried out. This is to ensure that the

proposed system is not a burden to the company. For feasibility analysis, some

understanding of the major requirements for the system is essential.

Three key considerations involved in the feasibility analysis are

 ECONOMICAL FEASIBILITY

 TECHNICAL FEASIBILITY

 SOCIAL FEASIBILITY

ECONOMICAL FEASIBILITY

This study is carried out to check the economic impact that the system will have on the

organization. The amount of fund that the company can pour into the research and

development of the system is limited. The expenditures must be justified. Thus the

developed system as well within the budget and this was achieved because most of the

technologies used are freely available. Only the customized products had to be purchased.
TECHNICAL FEASIBILITY

This study is carried out to check the technical feasibility, that is, the technical

requirements of the system. Any system developed must not have a high demand on the

available technical resources. This will lead to high demands on the available technical

resources. This will lead to high demands being placed on the client. The developed

system must have a modest requirement, as only minimal or null changes are required for

implementing this system.

SOCIAL FEASIBILITY

The aspect of study is to check the level of acceptance of the system by the user. This

includes the process of training the user to use the system efficiently. The user must not

feel threatened by the system, instead must accept it as a necessity. The level of

acceptance by the users solely depends on the methods that are employed to educate the

user about the system and to make him familiar with it. His level of confidence must be

raised so that he is also able to make some constructive criticism, which is welcomed, as

he is the final user of the system.

3. Process Model Adopted -

3.1 Analysis –

Object Oriented analysis can be defined as investigation and to be more specific it is the
investigation of objects. Design means collaboration of identified objects.

3.1.2 Object Oriented Analysis-

Object Oriented analysis can be defined as investigation and to be more specific it is the
investigation of objects. Design means collaboration of identified objects. So it is
important to understand the OO analysis and design concepts. Now the most important
purpose of OO analysis is to identify objects of a system to be designed. This analysis is
also done for an existing system. Now an efficient analysis is only possible when we are
able to start thinking in a way where objects can be identified. After identifying the
objects their relationships are identified and finally the design is produced.

So the purpose of OO analysis and design can described as:

 Identifying the objects of a system.

 Identify their relationships.
 Make a design which can be converted to executables using OO languages.

There are three basic steps where the OO concepts are applied and implemented. The
steps can be defined as

OO Analysis --> OO Design --> OO implementation using OO languages

Now the above three points can be described in details:

  During object oriented analysis the most important purpose is to identify objects
and describing them in a proper way. If these objects are identified efficiently
then the next job of design is easy. The objects should be identified with
responsibilities. Responsibilities are the functions performed by the object. Each
and every object has some type of responsibilities to be performed. When these
responsibilities are collaborated the purpose of the system is fulfilled.
 The second phase is object oriented design. During this phase emphasis is given
upon the requirements and their fulfilment. In this stage the objects are
collaborated according to their intended association. After the association is
complete the design is also complete.
 The third phase is object oriented implementation. In this phase the design is
implemented using object oriented languages like Java, C++ etc.

3.2 Design-

3.2.1 UseCase Diagram- Use case represents a set of actions performed by a system for
a specific goal. the purposes of use case diagrams can be as follows:

 Used to gather requirements of a system.

 Used to get an outside view of a system.
 Identify external and internal factors influencing the system.
 Show the interacting among the requirements are actors.

The primary actors of the system are administrator, teacher and student.

(a) Use case: Administrator

(b) Use case: Student
(c) Use case: Teacher
3.2.3 Activity Diagram- Activity diagrams are mainly used as a flow chart consists of
activities performed by the system. But activity diagram are not exactly a flow chart as
they have some additional capabilities. These additional capabilities include branching,
parallel flow, swimlane etc.

System activity diagram

2. Class Diagram
3. Sequence Diagram
(a)Student
(b) Teacher
(c) Administrator
 Data Flow Model: DFD is very useful in understanding a system and can be effectively
used during analysis. A DFD shows the flow of data through a system. It views a system
as a function that transforms the inputs into desired outputs. Any complex systems will
not perform this transformation in a single step, and a data will typically undergo a series
of transformations before it becomes the output. The DFD aims to capture the
transformations that take place within a system to the input data so that eventually the
output data is produced. The agent that performs the transformation of data from one
state to another is called a process (or a bubble). So a DFD shows the movement of data
through the different transformations or the processes in the system. Named circles show
the process and named arrows entering or leaving the bubbles represent data flows. A
rectangle represents a source or sink and is a net originator or consumer of data. A source
or sink is typically outside the main system of study.

General Rules

 Named circles represent processes in the system.

 Named arrows represent data Flows.
 A Rectangle represents a source or sink and is the net originator or consumer of data. A
source or sink is typically outside the system of study.
 All external files are shown as labeled straight lines.
 The need for multiple data values is represented by a “*” between the data flows. This
symbol represents the AND relationships. OR relationships is represented by a “+”.

It should be pointed that DFD is not a flowchart. A DFD represents the flow of
data, while a flowchart shows the flow of control. A DFD does not represent procedural
information. So while drawing a DFD, one must not get involved in procedural details, and
procedural thinking must be consciously avoided. The steps to construct a DFD start by
identifying the major inputs and outputs. Then starting from the inputs, work towards the
outputs, identifying the major transforms in the way. An alternative is to work down from
the outputs towards the inputs. Many systems are too large for a single DFD to describe the
data processing clearly. It is necessary that some decomposition and abstraction mechanism
be used for such systems. DFDs can be hierarchically organized, which helps in
progressively partitioning and analyzing large systems. Such DFDs together are called a
leveled DFD set.
DFD WITH DETAILED EXPLANATION

Context level DFD

This shows the context level diagram of the system. The users of the system are
administrator, teachers and students.
Administrator
This shows the different functions of administrator.

User functions:
a) Learner and tutor enrollment: add user, delete user.
b) curriculum and content management: add topic, delete topic, delete file.
c) User privileges management: change pwd.
Teacher

This shows the different functions of teacher.

User functions:
a) Content creation: upload file
b) question bank creation: add question
c) view learner’s progress: view student record.
d) Communicates with learners: chat, posting forum.
Student

This shows the different functions of student.

User functions:
a) View learning materials: view file.
 b) View personal progress: view test record
c) Take online tests: Take test.
d) Interactive discussions: chat, forum.

SYSTEM TESTING

The purpose of testing is to discover errors. Testing is the process of trying to discover
every conceivable fault or weakness in a work product. It provides a way to check the
functionality of components, sub assemblies, assemblies and/or a finished product It is
the process of exercising software with the intent of ensuring that the Software system
meets its requirements and user expectations and does not fail in an unacceptable manner.
There are various types of test. Each test type addresses a specific testing requirement.

TYPES OF TESTS

Unit testing
Unit testing involves the design of test cases that validate that the internal program logic
is functioning properly, and that program inputs produce valid outputs. All decision
branches and internal code flow should be validated. It is the testing of individual
software units of the application .it is done after the completion of an individual unit
before integration. This is a structural testing, that relies on knowledge of its construction
and is invasive. Unit tests perform basic tests at component level and test a specific
business process, application, and/or system configuration. Unit tests ensure that each
unique path of a business process performs accurately to the documented specifications
and contains clearly defined inputs and expected results.
Integration testing

Integration tests are designed to test integrated software components to determine if they
actually run as one program. Testing is event driven and is more concerned with the
basic outcome of screens or fields. Integration tests demonstrate that although the
components were individually satisfaction, as shown by successfully unit testing, the
combination of components is correct and consistent. Integration testing is specifically
aimed at exposing the problems that arise from the combination of components
Functional test
Functional tests provide systematic demonstrations that functions tested are available as
specified by the business and technical requirements, system documentation, and user
manuals.
Functional testing is centered on the following items:
Valid Input : identified classes of valid input must be accepted.
Invalid Input : identified classes of invalid input must be rejected.
Functions : identified functions must be exercised.
Output : identified classes of application outputs must be exercised.
Systems/Procedures : interfacing systems or procedures must be invoked.

Organization and preparation of functional tests is focused on requirements, key

functions, or special test cases. In addition, systematic coverage pertaining to identify
Business process flows; data fields, predefined processes, and successive processes must
be considered for testing. Before functional testing is complete, additional tests are
identified and the effective value of current tests is determined.
System Test
System testing ensures that the entire integrated software system meets requirements.
It tests a configuration to ensure known and predictable results. An example of system
testing is the configuration oriented system integration test. System testing is based on
process descriptions and flows, emphasizing pre-driven process links and integration
points.

White Box Testing

White Box Testing is a testing in which in which the software tester has knowledge of
the inner workings, structure and language of the software, or at least its purpose. It is
purpose. It is used to test areas that cannot be reached from a black box level.
Black Box Testing
Black Box Testing is testing the software without any knowledge of the inner workings,
structure or language of the module being tested. Black box tests, as most other kinds of
tests, must be written from a definitive source document, such as specification or
requirements document, such as specification or requirements document. It is a testing in
which the software under test is treated, as a black box .you cannot “see” into it. The test
provides inputs and responds to outputs without considering how the software works.

Unit Testing:
Unit testing is usually conducted as part of a combined code and unit test phase of the
software lifecycle, although it is not uncommon for coding and unit testing to be
conducted as two distinct phases.
Test strategy and approach
Field testing will be performed manually and functional tests will be written in detail.

Test objectives
 All field entries must work properly.
 Pages must be activated from the identified link.
  The entry screen, messages and responses must not be delayed.

Features to be tested
 Verify that the entries are of the correct format
 No duplicate entries should be allowed
 All links should take the user to the correct page.

Integration Testing
Software integration testing is the incremental integration testing of two or more
integrated software components on a single platform to produce failures caused by
interface defects. The task of the integration test is to check that components or software
applications, e.g. components in a software system or – one step up – software
applications at the company level – interact without error.
Test Results: All the test cases mentioned above passed successfully. No defects
encountered.

Acceptance Testing

User Acceptance Testing is a critical phase of any project and requires significant
participation by the end user. It also ensures that the system meets the functional
requirements.
Test Results: All the test cases mentioned above passed successfully. No defects
encountered.
Conclusion:-

Any system, which has been in use for a number of years, gradually, decays and become
less effective because of the change in environment to which one has to adapt. For a time
it is possible to overcome problems by amendments and minor modification to
acknowledge the need of fundamental changes. Computerization was proposed as a
solution to the problem of being outdated with the fast present technologies. In this
project, our aim was to provide online registration.
 BIBLIOGRAPHY

Good Teachers are worth more than thousand books, we have them in Our
Department

REFERENCES

[1] S. Basu, A. Banerjee, and R. Mooney, “Active semi-supervision for pairwise

constrained clustering,” in SIAM International Conference on Data Mining, pp.
333–344, 2004.

[2] S. Basu, I. Davidson, and K. Wagstaff, Constrained Clustering: Advances in

Algorithms, Theory, and Applications. Chapman & Hall,2008.

[3] M. Bilenko, S. Basu, and R. Mooney, “Integrating constraints and metric

learning in semi-supervised clustering,” in International Conference on Machine
learning, pp. 11–18, 2004.

[4] I. Davidson, K. Wagstaff, and S. Basu, “Measuring constraint-set utility for

partitional clustering algorithms,” Knowledge Discovery in Databases, pp. 115–
126, 2006.
[5] D. Greene and P. Cunningham, “Constraint selection by committee: An
ensemble approach to identifying informative constraints for semi-supervised
clustering,” European Conference on Machine Learning, pp. 140–151, 2007.

[6] D. Cohn, Z. Ghahramani, and M. Jordan, “Active learning with statistical

models,” Journal of Artificial Intelligence Research, vol. 4, pp. 129–145, 1996.

[7] Y. Guo and D. Schuurmans, “Discriminative batch mode active learn- ing,”
Advances in Neural Information Processing Systems, pp. 593– 600, 2007.

[8] S. Hoi, R. Jin, J. Zhu, and M. Lyu, “Batch mode active learning and its
application to medical image classification,” in International Conference on
Machine learning, pp. 417–424, 2006.

[9] S. Hoi, R. Jin, J. Zhu, and M. Lyu, “Semi-supervised SVM batch mode active
learning for image retrieval,” in Computer Vision and Pattern Recognition, pp. 1–
7, 2008.

[10] S. Huang, R. Jin, and Z. Zhou, “Active learning by querying informative and
representative examples,” Advances in Neural Information Processing Systems,
pp. 892–900, 2010.

[11] B. Settles, “Active learning literature survey,” tech. rep., 2010.

[12] R. Huang and W. Lam, “Semi-supervised Document Clustering via Active

Learning with Pairwise Constraints,” in International Conference on Date Mining,
pp. 517–522, 2007.
Sites Referred:

http://java.sun.com
http://www.sourcefordgde.com
http://www.networkcomputing.com/
http://www.roseindia.com/
http://www.java2s.com/