Scribd
Upload
195 views2 pages

Crack Stitching PDF

An effective, successful and permanent structural repair method, crack stitching is ideal for buildings suffering from cracks in the masonry and mortar bed joints.

Uploaded by

Paul Lawless
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
195 views2 pages

Crack Stitching PDF

An effective, successful and permanent structural repair method, crack stitching is ideal for buildings suffering from cracks in the masonry and mortar bed joints.

Uploaded by

Paul Lawless
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 2

Crack Stitching

& Lintel Reinforcement


Problem
Many houses constructed with cavity walls did
not have a lintel over the windows in the outer
leaf. The brickwork - often referred to as
soldier coursing, was supported by the load
bearing window frame. Over time, the brickwork
loading slumps, and causes the frame to bend
and cracks appear in the mortar pointing.
A secondary problem to movement in a building
is cracking of both the masonry itself and cracks
in the mortar bed joints. This can either be
horizontal cracking or ‘stepped’ cracking, or a
combination of both.
It is important that the cause of the cracking is
identified before works commence and you may
need the assistance of a qualified person, such
as a Structural Engineer.

Solution
To strengthen the masonry, high grade stainless
helical bars are inserted into the bed joints.
These act as new beams in the case of lintel
reinforcement. Additional helical bars may also be
installed vertically up through the ‘soldier’ coursing
to tie the bricks to the newly created beam.

Features & Benefits


Easily fixed, even in weak materials
Invisible when installed
Very cost effective, saves having to install
traditional lintels
Versatile applications, designed for the job
Cementitious based and therefore
sympathetic to the original structure
Crack Stitching &
Lintel Reinforcement
Cutting Grouting

Deep chase made into mortar joint to remove the bed joint. After the chase has been cleaned out, a bead of grout or
two-part epoxy resin is inserted.

Cut Bars to Size Bars in the Cavity

Helical stainless steel bars are cut to the precise length to The bars are set into the chase and pushed home into the
create the repair and provide strength. grout. A second bead of grout is applied.

Lintel Reinforcement Crack Stitching

Two ‘Chords’ or beams are created over the window. Bars are set in the mortar joints, typically every 450mm
Supplementary bars ‘pin’ the brick to the beam. horizontal centres, and they extend 450mm either side of
the crack.

Peter Cox Ltd


Freephone 0800 789 500 Aniseed Park, Broadway Business Park
Chadderton, Manchester, OL9 9XA
www.petercox.com Email: enquiries@petercox.com

You might also like