Freightliner Trucks

C O NSTRUCTI O N
You can just work hard.
Or you can Work Smart.

114SD Set-forward Axle

Construction requires hard work. That’s a given. So whatever Our trucks are designed for a variety of construction site
you have in your toolbox better be tough enough to handle applications, such as dumps, mixers, roll-offs and cranes. They’re
the job, every day without fail. But in today’s business available with an array of options that make tough trucks even
environment, we expect more from our tools. We want smart tougher, like a choice of frame rails and reinforcements to
design, creative innovation and a level of efficiency that truly optimize strength and increase load weight capacity; front and
impacts the bottom line. Because, in the construction business, rear engine power take-offs; and body-specific chassis layouts
there are two words to remember: construction and business. so Truck Equipment Manufacturers (TEMs) have the flexibility
they need. Put simply, we didn’t just make these models tough,
At Freightliner, we build trucks that perform well on the job, we made them smart.
and enhance the financial performance of your business. We’re
proud to offer you an impressive line of vehicles, including the
dependable M2 106 and M2 112, the 108SD and 114SD, and
the Coronado SD.
Constructed for construction.
A lot of smart engineering goes into the structural elements of a Freightliner
construction vehicle. Our cabs are lightweight, yet extremely tough. Corrosion-
resistant aluminum is reinforced with e-coated steel and assembled to precise
manufacturing tolerances with Henrob rivets and welded construction. This
process produces a durable and safe cab that meets stringent A-pillar impact,
rollover and back wall impact tests. Plus, the vocational chassis includes a robust
backbone with a complete offering of single and double channel frame rails. The
result is a tensile strength of up to 120,000 psi and an RBM ratio up to 4.4 million
inch-pounds per rail. So it can handle the abuse of a typical job site, no problem.

Aluminum Structural E-coated Steel Corrosion-resistant

Reinforcements Reinforcements Aluminum Panels

• Corrugated floor, roof and back-of-cab panels for added strength

• Meets Swedish A-pillar test standards and SAE J2422 roof strength requirements
• Available in day cab, extended cab or 4-door crew cab configurations
Components, systems and entire vehicles are subjected to an array
• 2,500 square-inch one-piece windshield for outstanding job site visibility
of virtual and physical tests to ensure our trucks deliver the
• Wide door openings with low step-in height for safe entry and exit expected function, performance and reliability.
• Steel firewall for solid mounting of dash panel and driver controls
We’ve assembled a tough crew
with a ready-to-work attitude.

M2 106 108SD
So many jobs. Rugged and versatile work
One amazing truck. well together.
Freightliner’s M2 106 is one of the most versatile trucks on the job site. Freightliner’s 108SD set-back axle is all-out performance and reliability.
This medium-duty vehicle comes standard with a powerful yet fuel- With its steel-reinforced aluminum cab, 108-inch BBC, 42-inch set-back
efficient Cummins ISB or optional ISC engine for increased efficiency axle position and tilt hood with radiator-mounted stationary grille for
through great fuel economy and easy maintenance. Driving in a bumper-mounted attachments, front frame extensions, front and rear
challenging environment requires a truck that’s agile and easy to engine power take-offs and body-specific chassis layout, this truck is
maneuver, which is why the M2 was engineered with a turning radius that an ideal construction vehicle. The 108SD is offered standard with the
is one of the tightest in the industry. And its automatic transmission is Cummins ISC or optional ISB engine for excellent fuel economy and
easy on new and experienced drivers alike. easy maintenance. Up to 50-degree wheel cut means that you’ll have

Because driver comfort is key for maximum driver performance, this truck the maneuverability you need, even on the toughest job sites. And,

features a spacious cab with low step-in height, an advanced heating with our mid-chassis packaging, the 108SD is an easy upfit for truck

and cooling system and a smooth, quiet ride. With a multiplex wiring equipment manufacturers.

system, clear frame rails and a variety of exhaust packages, you can get the • Ideal for dump truck applications
configuration you need for the job at hand. • GVWR up to 79,000 pounds
• Horsepower from 200 – 350 hp
• Ideal for stakebed, and lube/service truck applications
• Torque ratings up to 1000 lb-ft
• GVWR up to 56,000 pounds
• Horsepower from 200 – 350 hp
• Torque ratings up to 1000 lb-ft
114SD Coronado® SD
Handles dumping, mixing and This beauty can tackle
heavy lifting. your ugliest jobs.
Freightliner’s 114SD features a 114-inch BBC and is available as a set- Freightliner’s flagship vocational truck, the Coronado SD, is engineered
forward axle (SFA) or set-back axle (SBA) platform. It has a weight- to take on severe environments and extreme conditions. The durable
optimized design to keep pace with your increasing demands and and dependable SD combines time-tested performance with the latest
toughest challenges. The 114SD offers excellent visibility and a range of advances in engineering and technology. Customizable to meet your
options for all regional configurations. Engines, axles and frames can easily specific operational or business needs, the Coronado SD is tough on
be adapted to any job. The workhorse 114SD is available in the widest the outside, comfortable on the inside and, as always, ready for the
range of engine choices, including the Detroit™ DD13,® or Cummins most brutal jobs you’ve got. The Coronado SD has the rugged styling
ISC, ISL and ISL G. And, with our clear back-of-cab chassis, the 114SD is you expect in a work truck. With features like an aluminum cab, up
an easy upfit for equipment manufacturers, allowing greater flexibility. to 50-degree wheel cut, chromed steel front grille and single-piece
Legendary Freightliner quality, insightful industry-specific innovations fiberglass hood, the Coronado SD raises the bar for durability. And, with
and a comprehensive warranty all make the 114SD the perfect vehicle to a 1,900 square-inch radiator to cool engines up to 600 hp, there’s no
meet your most severe duty needs. doubt: the Coronado SD is ready to take on anything, any day. Sure, the
Coronado SD looks good, but make no mistake. It’s the ultimate work
• Ideal for mixer, quad dump and crane applications
truck down to the core.
• GVWR up to 60,000 pounds (single axle),
80,000 pounds (tandem axle) or 91,000 pounds
• Ideal for quad dump trucks, cranes and
(tridem axle)
heavy haul tractor applications
• Horsepower from 260 – 450 hp
• GVWR up to 92,000 pounds
• Torque ratings up to 1650 lb-ft
• Horsepower from 350 – 600 hp
• Torque ratings up to 2050 lb-ft
Configured for comfort
and control.
Every aspect of a Freightliner cab was designed to make the driver’s job easier, leading to increased
productivity. For example, the strategically-designed wide cab provides room between the seats for
easy installation of the control tower. To reduce fatigue, our cab features a low step-in height with
slip-resistant dual steps, a wide door opening and strategically-placed exterior and interior grab handles.
For safety, the cab’s hood slopes downward for better line-of-sight, and a 2,500* square-inch wind-
shield provides excellent visibility for spotting potential hazards. Freightliner construction vehicles
offer a variety of cab configurations.
* M2 106, M2 112, 108SD and 114SD

Cab Configurations AT-A-GLANCE

M2 106 108SD 114SD Coronado SD

GVWR Up to 56k Up to 79k Up to 91k (tridem) Up to 92k

Set-forward Axle • •
Set-back Axle • • • •
Day Cab • • • •
Extended Cab • • •
Crew Cab • • Set-back axle only
34-70 inch mid-roof,
Sleeper Extended cab with bunk Extended cab with bunk Extended cab with bunk mid-roof XT and
raised-roof sleeper cabs

M2 106, 108SD and 114SD

Cab Configurations

Day Cab
• Full width bench seat
• Fixed or air suspension driver and passenger seats
• Passenger seats with storage or locking safe provisions

26" Extended Cab

• 24" liftable bunk with storage
• Full-width rear bench seat or forward-facing rear
jump seats
• Fixed or tip-out tinted side rear windows
• Cab privacy curtain

48" Crew Cab

• Rear bench or individual seats including
air-suspended
• Electric rear door windows
 Tough outside.
Smart inside.
When you step inside a Freightliner truck, you’ll definitely understand what it
means to Work Smart. The driver-friendly dash features controls and switches
within easy reach of the driver. The analog gauges are backlit with LED lights
for easy readability. Even the dash structure is designed with fewer sections,
making it one of the quietest and most durable dashboards we’ve ever made.

108SD and 114SD interior with standard wing dash (shown above)

Coronado SD
Cab Configurations

Available
cab configurations:
• Day Cab
• 34" Mid-roof
• 48" Mid-roof
• 58" Mid-roof
• 70" Mid-roof
• 58" Mid-roof XT
• 70" Mid-roof XT
• 58" Raised Roof
• 70" Raised Roof

Available
axle configurations:
• 122" BBC Set-forward Axle
• 122" BBC Set-back Axle
Coronado SD dash and interior (shown above)
Better performance is
smart business.
Coronado
M2 106 108SD 114SD
SD
Power and efficiency.
Engines
A broad range of engine and transmission choices
Cummins ISB*
allows you to select the optimum combination 200 - 325 hp / 520 - 750 lb-ft torque • •
to match virtually any construction application. Cummins ISC*
Because we’re committed to helping you make the 260 - 350 hp / 660 - 1000 lb-ft torque • • •
best overall decisions. Cummins ISL
up to 380 hp / 1300 lb-ft torque •
Freightliner Trucks has embraced proven SCR emissions Cummins Westport ISL G (natural gas)
technology. Based on environmental advantages and up to 320 hp / 1000 lb-ft torque •
payback to owners in less maintenance, increased fuel Detroit™ DD13®
350 - 450 hp / 1250 - 1650 lb-ft torque •
economy, better reliability and more uptime, SCR has
clearly been proven as a successful platform for EPA Detroit™ DD13®
350 - 470 hp / 1250 - 1650 lb-ft torque •
2010 and beyond.
Detroit™ DD15®
455 - 560 hp / 1550 - 1850 lb-ft torque •
We made this job easy.
Detroit™ DD16®
For starters, we offer several sizes of Diesel Exhaust 475 - 600 hp / 1750 - 2050 lb-ft torque •
Fluid (DEF) tanks, so you can incorporate filling Cummins ISX15
400 - 600 hp / 1450 - 2050 lb-ft torque •
into your standard maintenance intervals. Next, we
* Higher ratings are available for approved applications
integrated the DEF gauge into the diesel fuel gauge.
The gauge indicates the level of DEF in the tank and Transmissions
has a series of alerts when the tank is running low. Eaton Fuller Manual • • • •
A driver who ignores their DEF low level warnings
Eaton Fuller Automated • • •
will see de-rates and restrictions on their vehicle, but
Allison Automatic • • • •
will never be stranded.
Freightliner AMT3

Automated-Manual Transmission •
AXLES (up to)

Steer 16k 20k 22k 22k

Single Drive 30k 38k 38k 26k
Tandem 40k 46k 58k 70k
Tridem 69K 69k

Detroit™ DD13® Engine

The power of going green.
As the demand for environmentally-conscious products and services continues to grow, the
M2 106 Hybrid and the M2 112, 114SD LNG or CNG Natural Gas options are perfect for
stop-and-go and high-idling vocational operations. Driving
a hybrid or a natural gas-fueled vehicle delivers economic
advantages today and environmental benefits for future
generations. And, as a domestic fuel source, natural gas
reduces our dependency on foreign oil.

Thanks to federal and state government incentives, your

alternative fuels vehicle can save you money even before
Cummins ISC Engine
you get it on the road. Contact your local Freightliner Dealer to find out which state and
federal rebates and incentives are available to you, so you can work smart from day one.
 Trucks Built for builders.
Truck Equipment Manufacturers (TEMs)
love the efficient design of our trucks.
Electrical, pneumatic and fuel lines
have been neatly organized inside the
left-hand rail for most applications. This
relieves congestion at the back-of-cab, making access easier for body
builders and service technicians.

We’ve also spent a decade developing and refining multiplex electrical

wiring. Our latest evolution is the SmartPlex™ Electrical System.
SmartPlex provides TEMs with the most efficient and reliable
solution that will increase the ease of body integration and
application programming, keeping customers on the road
and working smarter.

Primary Benefits of the

SmartPlex Electrical System:
• Improved Reliability - The multiplex wiring system reduces the
number of wires by more than 40 percent, from 650 to 350. That
means 300 fewer possible failure points, as well as fewer connectors,
relays and fuses. Advanced solid-state components further enhance
the reliability of the multiplex system, as does the relocation of the
Power Distribution Modules inside the cab for corrosion prevention. Designed for easy body upfit.
• Greater Flexibility - Configuring a truck’s wiring system is easier
than ever. Simply install specific switches where they are most
convenient, then use ServiceLink to program them to do what you
want them to do. If you want to move a switch from the dash to
the overhead or vice versa, go ahead, there’s no need to rewire or
reprogram.

• Easier Maintenance - Onboard computers capture data, providing

better diagnostic capability. If a problem occurs, the data is relayed
to the dashboard alerting the operator. This data also can be
accessed using Freightliner’s ServiceLink® software for diagnosis by Under-cab storage for up to three batteries allows for clear
back-of-cab packaging.
a technician.
* M2 106, M2 112, 108SD and 114SD

1-Box exhaust aftertreatment system allows for clear

back-of-cab packaging
Maintenance made easy.
We’ve designed these vehicles to be easy to maintain, with quick There’s a lube-free
access to critical maintenance points. The hood opens easily and steering shaft, a self-
features integrated splash shields that lift out of the way for better adjusting hydraulic clutch
accessibility. Frequently inspected components are strategically and suspensions that require no
placed, allowing for faster repairs and adjustments. See-through maintenance or lubrication. The truck’s
fluid reservoirs reduce the time spent checking fluid levels, and a multiplex electrical system* has about half the
removable floor section allows access to the transmission without wires of a traditional electrical system, which reduces possible failure
removing the floor covering. points and allows technicians to more quickly pinpoint electrical
problems. With Virtual Technician on board 24/7 monitoring your
The standard proprietary Donaldson PowerCore® air cleaner is truck’s Detroit™ engine and automatically diagnosing engine fault
designed to last longer between replacements, yet still traps codes, you’re able to stay on the road longer, be more productive
99.85 percent of airborne particles before they reach the engine. on the job and remain in control of your business.
An optional pre-cleaner is available for the harshest environments.

* M2 106, M2 112, 108SD and 114SD

114SD Set-back Axle

 Coronado SD Set-back Axle

114SD Set-back Axle

114SD Set-forward Axle

M2 112
We’ve got you
covered.
Unmatched service and support.
With more than 300 Freightliner dealer locations across North
America, you’re never far from the convenient service and support
you have come to expect from the industry leader. In addition,
more than 300 Freightliner ServicePoint® facilities located at
TravelCenters of America and Petro Stopping Centers offer
certified repair and warranty work. When you need a factory-
certified technician, Detroit offers more than 800 locations in
North America.

Freightliner also maintains strategically located parts distribution

centers throughout North America, ensuring fast parts delivery to
keep customers up and running.

Freightliner’s Customer Assistance Center provides customers

a hotline that’s available 24 hours a day, seven days a week.
Customers may call the toll-free number (1-800-FTL-HELP) for
technical support, to arrange roadside assistance or towing
services, or to locate the nearest dealer or service center.

A simple purchase process that’s Comprehensive warranties for

second to none. added peace of mind.
Purchasing a truck is one of the most important decisions Freightliner stands behind its trucks every step of the way.
you make. Freightliner makes the buying process easy, with We offer one of the most comprehensive warranties in the busi-
highly trained sales consultants and one of the largest dealer ness, as well as a variety of extended warranties.
networks in the industry, so businesses don’t have to look far
for their next purchase. Count on Freightliner dealers for reli- Better Parts. Good Prices.
able product information, truck parts and service, and ongoing
Alliance Truck Parts offers a range of new and remanufactured
customer support.
maintenance, repair and replacement parts and accessories for
virtually all types of heavy-duty trucks at
Financing is easy.
an affordable price. Alliance Truck Parts
Daimler Truck Financial (DTF) are sold at Freightliner dealers throughout
offers a variety of options, includ- the U.S. and Canada.
ing loans and leases tailored to the
trucking industry, that make financing go smoothly. DTF has been
meeting the financing challenges of owner-operator and vocational
customers for more than 30 years. It offers finance solutions includ-
ing conventional retail financing at attractive and competitive rates,
a variety of terms to match cash flow, and up to 100% financing for
qualified customers.

f r e ig h t l in e rt r u c k s.com/worksm art

Competitive financing available through Daimler Truck Financial. For the Freightliner Trucks Dealer nearest you, call 1-800-FTL-HELP.
www.freightlinertrucks.com. 15M, 12/2011. FTL/MC-B-1101. Specifications are subject to change without notice. Freightliner Trucks is
registered to ISO 9001:2000 and ISO 14001:2004. Copyright © 2011. Daimler Trucks North America LLC. All rights reserved.
Freightliner Trucks is a division of Daimler Trucks North America LLC, a Daimler company.