Vision Line
Vision Line
be extended access to their rooms automatically from reception, locks that have low battery, instead of walking to each lock to
to avoid guests having to come to reception to re-encode the check it.
keycard. 13) Insert maintenance report cards: By maid inserting
6) Remote “change my room” function: Guest can auto- maintenance report cards into the lock, it will remotely inform
matically be assigned a different room from reception, without VISIONLINE reception that room needs maintenance.
needing to come to reception to re-encode the keycard. 14) Auto SMS/e-mail alert option: Lock actions may be sent
•• More Efficient and Cost Effective Hotel Operations: to person in charge automatically.
7) Online passage mode activation: Locks can be remotely 15) ... and many more.
configured in passage mode from VISIONLINE server.
8) Live tracking of card users: You can follow up individual
VISIONLINE by VingCard Network Architecture
•• Standalone electronic locks with RF-end nodes communicating to the VISIONLINE server through the Zigbee
network.
•• Gateways connecting to hotel Ethernet network for direct communication with VISIONLINE server.
•• Routers that relay communication between locks and gateways.
Based on IEEE 802.15.4 (Open ISM 2.4GHz-band; ISM = industrial, scientific and medical) •
16 Channels spread spectrum (DSSS, Direct Sequence Spread Spectrum) • 250kbit (~20kbit @ 1% duty-cycle)
VISIONLINE by VingCard Software
In addition to the basic offline software for VISIONLINE, additional modular online packages are available in order to match the
specific needs of your property. These modules can be added on at a later stage if needed. The online software modules are:
Encoders
For VISIONLINE combo systems there are several options:
•• A motorized dual card encoder (encodes both magnetic- and smart card)
with display (Fig. 1).
:: Dimensions (HxWxD): 124 mm/4,88 inch x 110 mm/4,33 inch x 233 mm/9,17 inch
Fig. 2
Service equipment
Lock programming and interrogation in VISIONLINE is done with a special service terminal with
dedicated software, and cable interface towards the different lock types. Combo- and RFID locks
have two different cable interfaces.
Accessories by VingCard
Remote Controller
For areas such as common doors, vehicle barriers, health clubs, conference suites, staff entrances, sliding doors, revolving doors
and more, VingCard’s Remote Controller may be used to manage access control.
A complete Remote Controller consists of a card reader for card verification and an special TCP/IP Gateway for secure
communication and online connection. All external devices to be controlled are connected to the TCP/IP Gateway.
RFID remote controller Remote controller dimensions Configuration overview of Remote Controller in
Zigbee network
Elevator Controller
VingCard’s Elevator Controller (or Multi Output Controller - MOC) is designed to fit into the elevator panel. The security level of the
hotel will increase, as only guests with a valid keycard will have access to the elevators. The units can be delivered as smart/
magnetic stripe or RFID version.
The MOC is designed for installing inside the lift, connected to the lift electronics, or outside the lift, connected to the call button
electronics.
A complete MOC system consists of a card reader for card verification, an electronics box for installing behind the elevator
control panel and a special TCP/IP Gateway, optionally in combination with additonal relay modules. This depends on how many
outputs that are required for the elevator installation. Maximum number of outputs for a MOC is 128, dependent on number of
relay modules added.
Elevator Controller mounted in (elevator) wall MOC Dimensions Configuration overview of MOC in Zigbee network
1) please see Remote Controller datasheet for more details on VingCard Remote Controllers.
VISIONLINE by VingCard lock compatibility
VISIONLINE is available with Signature RFID as well as Classic and Signature electronic locks with
a specific combo reader.
RFID Specifications
• 13,56MHz technology
• Compatible with the following standards:
ISO 14.443 A (MIFARE)
ISO 14.443 B
ISO 15.693
• Compatible with Near Field Communication (NFC) standards.
78 / 3,071"
139 / 5,472"
305 / 12,008"
240 / 9,449"
•• Use of mechanical override is registered in the lock memory for audit trail.
•• Mechanical cylinder can be either visible or not visible with a cylinder concealer (not
applicable for Classic).
•• Superior pick resistance through its 7 pin high security profiles and narrow channel
paracentric keyway anti pick drivers.
•• Unique cylinder fixing for added security.
•• 5 times recodable cylinder (incl. 2 construction levels).
•• Cylinder is available in all lock finishes. (Satin finishes may vary from lock finish).
(1) Features and functionality may vary depending on the lockcase. For lock specific features, please see our separate
datasheets for Classic, Signature or Signature RFID by VingCard.
Specifications
* Signature ANSI DB lockcase: * Classic ANSI DB lockcase:
ANSI: EURO:
• 25 mm front • 20 mm front
• 28 mm front • 22 mm front
Art. no: 4819031/December 2009 • Copyright VingCard Elsafe 2009 ©
• 32 mm front • 24 mm front
Backset: 70 mm Backset: 65 mm/80 mm
VingCard Elsafe AS
P.O. Box 511 • 1522 Moss • Norway
Tel: +47 69 24 50 00 • Fax: +47 69 24 50 50
E-mail: info@vcegroup.com • www.vcegroup.com