Industry

How to Tamp A Pictorial Guide

1.
David Seng is the head barista trainer at The Espresso School in Melbourne. He has been a barista for over 5 years, competing in coffee competitions at state, interstate and national levels.

Grind and dose it all starts with the perfect grind and dose. Dose to a mound.

2.

Distribute and level strike off any excess coffee with your finger or a hard plastic card.

Take the pressure down

There are many factors that a barista must fully control and understand to achieve the best possible espresso from the beans, grinder and espresso machine he or she is working on everything from controlling the dose and grind coarseness of the coffee to regulating the temperature of the espresso machine. One factor that is often overlooked by baristas is the art of tamping.
as a benchmark for tamping in industry. It gives baristas a baseline to work from 15 kg of downward force is merely a trade off between the compactness of the bed of coffee and preventing RSI (repetitive strain injury) for baristas tamping hundreds of group handles a day. So my answer to the question is often followed with the response: as long as you are consistent, it does not matter how hard you tamp. The reasoning is this: tamping harder or softer will have negligible impact on an extraction flow rate once the coffee bed has been tamped with sufficient pressure to remove any air pockets. 9 bar of extraction pressure is 16 times greater than the pressure of a 15kg tamp. Tamping pressure is immediately alleviated during the period when the dry coffee is wetted. Once the extraction is in full swing, there will always be much less tamping pressure than pump pressure.

hat is tamping and why do we do it? The process of tamping compresses ground coffee into a compacted bed and locks in the distribution of coffee within the group handle. Your objective is to remove any large air pockets and create a level bed of coffee (of equal density), through which hot pressurised water from the espresso machine will penetrate and extract evenly. There are two primary reasons related to tamping that causes uneven extractions: 1.  Water is lazy and if you offer it an easy way to get out, it will take it! This is often referred to as the path of least resistance. 2. I  t would be remiss of me to talk about tamping without mentioning the importance of dose, distribution and grind setting. Correctly choosing a dose and corresponding grind setting are the most important factors that affect how a shot pours even more so than tamping itself. Tamping will not fix inconsistencies related to dosing and distribution. What tamping will do however, is create a coffee bed that offers even resistance to the pressurised water that will result in an even extraction of espresso given a suitable grind setting and dose.

Figure 1. Coffee bed is not level and water flow is uneven causing a sour and thin extraction.

3.

Tamp tamp straight by keeping your arm vertical and in-line with the tamper with your body in close.

4.

Wipe remove any loose coffee sitting on top of the filter basket rim and group handle lugs.

Calibrated Tampers and Accessories

Figure 2. The lack of side adhesion to the filter basket causes water to rush through the gap. This is known as channelling.

This is a question I often face when teaching people to prepare espresso. The magical 15kg of force has often been used

How hard should I tamp?

Calibrated tampers are great training tools especially for someone learning to make coffee for the first time as it allows them to gauge how hard a tamp should be. Whilst great training tools in their own right, there is no reason why calibrated tampers cannot be used in a commercial setting. With multiple baristas on bar with different tamping styles, a

96

BeanScene

BeanScene

97

Industry

calibrated click tamper can be used as a guide for all. Calibrated tampers are essentially the same as regular tampers; the only difference is that these tampers have an internal spring mechanism that allows the tamper to click when youve reached the preset tamping pressure. An advanced barista will have the ability to use a calibrated tamper as he would a regular one, changing tamping styles and pressures depending on the type being used and what the barista wishes to achieve. As a barista, I believe a calibrated tamper can be used in conjunction with regular tampers throughout the day to maintain consistency and build up muscle memory. Simply put, it eliminates one variable in a multi-variable scenario of what could go wrong when preparing an espresso coffee. I believe the key to preparing great coffee, no matter what brewing method, is consistency. Over the last few years I have seen a plethora of tampers come out to the market trying to address one or both of the main issues identified earlier i.e. tamping straight/level and maintaining a consistent tamping pressure.

an amazing fit and finish. The Espro is extremely comfortable to use and a great training companion for any barista of any level. Price: $140 Options available: Flat and convex bases with sizes ranging from 49 to 58mm. Red handle comes in 57mm only. Australian Distributor: Veneziano Coffee

pullman

click mat

Options available: Various handle materials and colours with flat or US convex bases in various sizes. Australian Distributor: Pullman Coffee Tampers

Espresso Gear Attento Click Mat

www.espressogearaustralia.com.au

demaral

Whilst not a tamper, this Swedish built and designed tamping mat is a notable inclusion in this review. The Click Mat is a force adjustable tamping mat that can be set between 10 and 25kg of force. The Click Mat can be used with any machine and any tamper the barista chooses. Price: $49 Australian Distributor: Espresso Gear Australia David would like to thank Will Priestly for co-reviewing the tamping products, Samuel Ho for photography, Ben Lam for graphics and Cafenatics for hosting the review.

unique TrueTamp rings concentric rings running up the side of the base that provide an immediate visual indication of tamp depth and symmetry. The handle length is adjustable with removable spacers and the top of the base is covered

in rubber making it one of the most ergonomic tampers on the market. This tamper has no springs or mechanisms that can break down it is a manual tamper perfect for anyone serious about coffee. Price: From $139.95

All tampers in this review were tested on a La Marzocco GB5 espresso machine paired with ridgeless Synesso filter baskets and a Mazzer Robur E grinder. All technical details of this review are available at http://www. espressoschool.com.au/home/resources/ bean-scene

Review Products

Espro

Australian designed and made, the Dema.RAL is the new kid on the block featuring a depth adjustable base with flanges that sit on top of the filter basket ensuring a 100% level tamp. This tamper is perfect for coffee establishments with high staff turnover. This unit makes tamping easy and provides consistency and level tamping first time, every time. Angelo is the coffee technician who designed and built this tamper. He is currently trialling a new non-stick surface coating on the bases of the tampers to prevent coffee accumulating and sticking to the bottom. Price: $130 (inc. delivery) Options available: Various colours with flat, US convex and Euro convex bases ranging from 50 to 59mm. Australian Distributor: Euro Technology CMR

DemaRAL www.demaral.com

Grow your business.

It doesnt cost the earth
You care about great coffee, you also care about the planet. Choose the cup that shows you care.
The BioCup lining and lid are made using Ingeo a 100% annually renewable plant based bioplastic. The production of Ingeo uses 62-68% fewer fossil fuel resources than traditional plastics. Paper board is sourced from FSC managed plantations. BioCups are recyclable in the waste paper stream and are also compostable in commercial composting facilities.

Together we can make a difference one cup at a time.

Tel: 1300 BIOPAK (246725) / 02 8060 9000 Email: info@biopak.com.au Purchase online: www.biopak.com.au
lete soluti on
vailable inclu d is a

98

BeanScene

lid

Ac

The Espro is a precision engineered Canadian made and built unit. An internal feedback spring mechanism bottoms out at 15kg of force providing a subtle click. The Espro is a solidly built tamper with

Espro www.espro.ca

The Pullman Barista tamper comes in a stunning array of materials, colours, patterns and configurations to match your every whim. The Pullman Barista has been included in this review for its

Pullman Barista www.coffeetamper. com.au

ing

p om

It doesnt cost the earth

BioCup

It doesnt cost the earth

BioPak

compostable