Hydraulic Decoking

System Equipment

Experience In Motion
Flowserve has pioneered
many significant advance-
ments in hydraulic decoking
and has transformed it
into an increasingly safe,
efficient and automated
process.

The Decoking Experts

With over 100 years of decoking experience through Continuing to Innovate:
its Worthington ®, Pacific ® and IDP ® heritage brands, Remote and Automated Operation
Flowserve is the undisputed global leader in hydraulic
Improving personnel safety has always been the number
decoking systems. No other company has its depth one goal of DCU managers. Removing operators from
or breadth of expertise and experience. This is why the cutting deck would eliminate their exposure to
Flowserve decoking solutions permit customers to inherent hydraulic decoking dangers, including:
continuously improve key operational drivers: • High-pressure water
• Safety • Hot spot steam eruptions
• Hydrogen sulfide (H2S) vapors
• Productivity
• Fire and mechanical hazards
• Profitability
• System reliability The introduction of drum monitoring through vibration
and the AutoShift tool, along with significant
A Heritage of Innovation and Leadership advancements in associated equipment design, now
make remote operation possible. The addition of modern
In 1938 Flowserve Worthington designed and manufactured instrumentation, controls and software technology can
equipment for Shell Oil’s Wood River, Illinois (USA) refinery, achieve system automation for reduced cutting times
the world’s first hydraulic decoking installation. Flowserve with greater throughput, maximum reliability and lowest
supplied decoking tools, swivel joints, decoking control total cost of ownership.
valves and high-pressure water jet pumps for that system.
In 1940 Flowserve Pacific supplied the jet pumps for a Market Focused Customer Support
hydraulic decoking system at Standard Oil’s El Dorado,
Indiana (USA) refinery. Flowserve decoking specialists provide customer
support to develop effective proposals and solutions
Since then, Flowserve has pioneered many significant directed toward market and customer preferences.
advancements in hydraulic decoking. Integrated systems They offer technical advice and assistance throughout
consisting of decoking equipment, jet pump trains and control each stage of the product life cycle. From inquiry
systems are matched to achieve the guaranteed decoking to installation through start-up and expansion,
performance. Flowserve has transformed hydraulic decoking Flowserve specialists work with customers to achieve
into an increasingly safe, efficient and automated process. their operational goals.

2
 flowserve.com

Serving more
than 160 refineries
throughout the world

• = Refinery
Installations
• = Flowserve
Service Centers
• = Flowserve Decoking
Manufacturing
Operations

Leading the Way in New Equipment

and System Upgrades
A Complete Range of Decoking
Whether new equipment or system upgrades, Flowserve
System Equipment
con­tinues to advance decoking technology. With its AutoShift™
decoking tool, the company revolutionized the way coke is Whether for new equipment, system upgrades or
removed from the coke drum. Capable of remotely chang- replacement parts, Flowserve provides a complete
ing its operating mode from bore to drill and back to bore, proven decoking system:
AutoShift proved to be a significant advancement toward • Cutting tools
decoking automation along with ultimate improvement in • Threaded drill stems
operator safety. • Drill stem guideplates
Flowserve also has made continuous and significant improve- • Rotary joints
ments in the performance and reliability of its integrated • Decoking hoses
hydraulic decoking system. In addition to being the world • Crossheads
leader in barrel pump technology, Flowserve continues to • Free-fall arrestors
advance the development of decoking control valves, rotary • Pulley blocks, sheaves and wire ropes
joints, controls and ancillary equipment. This is why at more • Proximity limit switches
than 160 refineries around the world Flowserve is the • Latching mechanisms
preferred supplier of hydraulic decoking systems. • Tensiometers and instrumentation
• Winch systems, including console
• Isolation and bleed valves
• Decoking control valves
• Jet pump trains
• Lube oil skids
• Tools and accessories
• Control systems
• Drum cutting
monitoring systems

3
 Simplified Two-Drum
Hydraulic Decoking System

Audio / Video Drum

Isolation Valves Monitoring

Coke Drum
Vibration Monitoring
Lube Oil Skid

Decoking Control Valve

Control System Panels

Bleed Valve

Modular Operator
Enclosures

Jet Pump Train

4
 flowserve.com

Decoking Hose Latching Mechanism Pulley Blocks Arrestor Springs

Rail Gripping Crosshead

Winch Console

Cable Gripping Crosshead

Winch

Rotary Joint

Tensiometer

Drill Stem Assembly

Tool Enclosure
and Guide Plate

Cutting Tool
Removing Operating
Personnel From the
Cutting Deck

Automated Decoking Systems

Advancements in remotely operated cutting tool design
coupled with smart monitoring and control technology have Flowserve Intelligent Cutting Control
made automated coke cutting achievable. Automation options
The Flowserve intelligent cutting control combines
range from pre-programmed cutting to full automation.
the reliability of the PLC-based controls with an
Fully automated systems feature cutting control with intelligent algorithm that not only continuously
continuous feedback signals as to equipment and drum monitors and records multiple process variables
status. These systems include embedded intelligence to and equipment conditions, but also automatically
process signals for monitoring and control so operator makes adjustments to operating parameters to
interface is only required for sequence exceptions. Operator reliably control the equipment in the field. The goal
and plant safety are further enhanced by integrating an is to optimize cutting time. In effect, this interactive
automated cutting system with PLC interlocks for fail-safe system replaces the operator decision-making
control of crucial equipment and operating parameters. interface.
The intelligent control system is programmed
Key System Elements to monitor the cleanliness of the drum to
ensure a complete clean regardless of coke type
• AutoShift™ remotely shifted cutting tool with automated
through the process and provides a signal to
drum unheading equipment, self-aligning tool guide plates the operator and DCS once the drum is ready
and hydraulically powered winches and rotary joints to rehead. The system is flexible in the type of
• Flowserve intelligent coke drum vibration monitoring coke being produced by the DCU on any given
and coke cutting control completely integrated with the crude slate and responds to mechanical issues
decoking control system within the system as well as the most common
–– Coker drum display indicates: cutting problems, including slack cable coke bed
• Drum cleanliness collapses.
• Cutting tool position
• Control valve position
• Diagnostic information
–– Coke cutting display indicates:
• Crosshead latch/unlatch
• Rotary joint and winch speed
• Cutting pressure and dwell time
• Wire rope tension
• Local “podium” control panel on the cutting deck for
maintenance and emergency situations
• Video equipment enabling operator to view cutting deck
and chute operations
• Acoustic devices to audibly monitor cutting deck and/or
chute conditions

6 Critical process information is displayed in real time on

the operator’s control panel.
 flowserve.com

Decoking Flowserve engineers

Equipment, develop proposals
System Upgrades that result in
and Service reduced operational
costs, increased
coker efficiency and
improved system
reliability.

Complete Upgrade Solutions for the Future

Whether converting to heavier coker feed stock to reduce Unequaled Product and System Support
costs and increase production or revamping systems to
With the industry’s most comprehensive portfolio of
address safety, environmental and maintenance needs,
fluid motion and control products, including pumps,
Flowserve works closely with refinery personnel to develop
seals, valves and actuation, Flowserve is well posi-
proposals for upgrading existing coking equipment. These
tioned to attend to its decoking customers’ product
proposals result in reduced operational costs, increased
and support needs.
coker efficiency and improved system reliability.
• Service
Flowserve offers numerous safety and performance upgrades
–– Start-up and commission
for vintage equipment of all types, including:
• Repair
• Cutting tools –– Local repair center
• Decoking valves –– On-site repair
• Rotary joints • Technical support
• Jet pumps –– Decoking specialists
• Control systems –– Plant evaluations (walk-throughs)
–– Site-specific training
Field Service and Technical Support • Spare parts
• Auxiliary equipment
Flowserve customer service technicians are on call 24 hours
• Training
a day, seven days a week to respond to scheduled or
• Alliance agreements
un­scheduled outages, construction, installation and start-up
service needs. Technicians are specifically trained to evaluate In addition, Flowserve is an authorized repair center
and troubleshoot problems with decoking systems and for the isolation, bleed and unheading valves.
equipment. Backed by Flowserve design and engineering
groups, technicians have access to manufacturing drawings,
bills of material and performance data so they can develop
practical and reliable solutions to decoking problems.

7
 USA and Canada
Flowserve Corporation
5215 North O’Connor Blvd.
Suite 2300
Irving, Texas 75039-5421 USA
Telephone: +1 937 890 5839

Europe, Middle East, Africa

Flowserve Corporation
Parallelweg 13
4878 AH Etten-Leur
The Netherlands
Telephone: +31 76 502 8100

Latin America
Flowserve Corporation
Martín Rodriguez 4460
B1644CGN-Victoria-San Fernando
Buenos Aires, Argentina
Telephone: +54 11 4006 8700
Telefax: +54 11 4714 1610

Asia Pacific
Flowserve Pte. Ltd.
10 Tuas Loop
Singapore 637345
Telephone: +65 6771 0600
Telefax: +65 6862 2329

Bulletin PS-90-6j (E) April 2016. © 2016 Flowserve Corporation

To find your local Flowserve representative:

For more information about Flowserve Corporation,

visit www.flowserve.com or call +1 937 890 5839.

flowserve.com