Scribd
Upload
99 views2 pages

Moment Conn-Fl

This document provides design details for a flush end plate moment connection. It includes dimensions for the section and straining actions. It checks the number and diameter of bolts required and performs calculations for bolt forces, weld sizes, and end plate thickness. Key values checked include tension and shear forces per bolt, utilization coefficients, and minimum weld sizes.

Uploaded by

mahmoud Ibrahem
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
Download as xls, pdf, or txt
99 views2 pages

Moment Conn-Fl

This document provides design details for a flush end plate moment connection. It includes dimensions for the section and straining actions. It checks the number and diameter of bolts required and performs calculations for bolt forces, weld sizes, and end plate thickness. Key values checked include tension and shear forces per bolt, utilization coefficients, and minimum weld sizes.

Uploaded by

mahmoud Ibrahem
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
Download as xls, pdf, or txt
Download as xls, pdf, or txt
You are on page 1/ 2

Flush End Plate Moment Conn.

DAR AL-HANDASAH DESIGN OF MOMENT CONNECTION


SHAIR&PARTNERS Flush End Plate Moment Connection
Project Prepared by Dr.Hany El-Rashidy/Eng.Walaa El-MohandComputed by:
Building Checked by
Subject Approved by

Reference BS 449 Part 2

Section Dimensions

H (Total) t (web) B (fl.) t (fl.)


cm

Straining Actions

Moment (m.t
Shear (t.)Tension (t.)

FY= 2.45 t/cm2 Normal Grade

Check No. and Diameter of Bolts:

NO.OF BOLTS/COL.= 2.00 bolt (up to 10 col's.)


NO.OF BOLTS/ROW.= 4.00 bolt 2 Bolts
4 Bolts
Y1= 6.00 cm I1= -6.00 cm ###
Y2= 16.00 cm I2= -22.00 cm ###

I(bolts)= -346.67 cm

T1= 0.00 ton


T2= 0.00 ton

###

416673731.xls 1/2 04/15/2019


Flush End Plate Moment Conn.

MAX.TENSION FORCE/BOLT= 0.00 ton Grade (8.8) - D


MAX.SHEAR FORCE/BOLT= 0.00 ton
###
USE BOLTS = M24 Grade (10.9) - DIN 6914 - No Torque Tightened M16
F all.ten. (No Torque T.) = 14.47 ton M20
F all.ten. (With Torque T) = 15.40 ton M22
F all.shear = 8.80 ton M24
M27
U.C due to tension = 0.00 < 1 (safe) M30
U.C due to shear = 0.00 < 1 (safe) M36
E70XX
Calculation of Welding Size: E60XX

Allowable weld stress


Electrode specificatio E70XX
Tensile strength = 3.48 t/cm2
f all. = = 0.3*nominal tensile strength of weld metal
1.04 t/cm2
= 0.4*yield stress of base metal
0.98 t/cm2
f all. = 0.98 t/cm2
TENSION FOR FLANGE = #DIV/0! ton
TOP FLANGE WELD SIZE= #DIV/0! cm

Sw(min.) = #DIV/0! mm.

Calculation of End Plate Thickness:

Check on the first bolt in the same row:


g= 0.00 cm
Sw. web = 0.00 cm
m'' = 0.00 cm
2*m''*(3)^0.5 = 0.00 cm
pitch P = 0.00 cm
V' = 6.00 cm
dq = LESS(P/2+V' AND P/2+ m''*3^0.5)

dq = 0.00 cm

Thickness of Head Plate Te= #DIV/0! cm

T1= #DIV/0! mm

Check on the second bolt in the same row:


g1 = 0.00 cm
m=m''+g1 = 0.00 cm
2*m*3^0.5 = 0.00 cm
dq = Min. P/2+V' AND P/2+ m''*3^0.5)
dq = 0.00 cm

Thickness of Head Plate Te= #DIV/0! cm


T2= #DIV/0! mm

Te (final) = #DIV/0! mm

416673731.xls 2/2 04/15/2019

You might also like