Course Title: Basic Computer Skills Lab Course Code: 15AT12P

Credits (L:T:P) : 0:2:4 Credit:3 Core/ Elective: Core

Type of course: Tutorial, Practice Total Contact Hours: 78
CIE- 25 Marks SEE- 50 marks

Prerequisites: Knowledge of English comprehension.

Course Objectives:

Learn and understand the Basics of Computers and apply the application tools like word
processor, spread sheet and presentation to create documents and presentation in engineering
domain.

On successful completion of the course, the students will be able to attain CO:
CL Experiments Linked PO Teaching
Course Outcome linked Hrs
Understand the basic
organization of the R/U/A 1and 2 of Unit-1 1,2,3,4,8,9,10 03
CO1
computer.
Use the different tools and
utilities of the operating R/U/A 3 to 7 of Unit-1 1,2,3,4,8,9,10 18
CO2
system.
Demonstrate specified skills 1 to 6 of word
of using word processor processor part of 1,2,3,4,8,9,10
R/U/A 18
CO3 Unit-2
module.
Demonstrate specified skills 1 to 5 of spread
R/U/A sheet part of Unit- 1,2,3,4,8,9,10
of using word spread sheet 18
CO4 2
module
Demonstrate specified skills 1 to 3 of
of using presentation R/U/A presentation part 1,2,3,4,8,9,10 09
C05 of Unit-2
module.
Contents mini
Utilize the concepts learned
U/A project part of All ten 12
C06 to create a mini project.
Unit2
Total sessions 78

COURSE PO ATTAINMENT MATRIX

Course Programme Outcomes

1 2 3 4 5 6 7 8 9 10
Basic Computer skills Lab 3 3 3 3 1 1 1 3 3 3

Directorate Of Technical Education Karnataka State 15AT12P Page 1

 Level 3- Highly Addressed, Level 2-Moderately Addressed, Level 1-Low Addressed.
Method is to relate the level of PO with the number of hours devoted to the COs which address the given PO.
If >40% of classroom sessions addressing a particular PO, it is considered that PO is addressed at Level 3
If 25 to 40% of classroom sessions addressing a particular PO, it is considered that PO is addressed at Level 2
If 5 to 25% of classroom sessions addressing a particular PO, it is considered that PO is addressed at Level 1
If < 5% of classroom sessions addressing a particular PO, it is considered that PO is considered not-addressed.

Course Contents:

Tutorials and Practice

Unit – I

Introduction to Computer Hardware and Software

1. Identify and understand the models of Computers, Identify and understand front panel
switches and back panel connections of a Computer system, Identify and understand
the physical components of a Computer.
2. Conduct computer system connection and understand the booting process.
3. Study and Practice of Basic DOS Commands.
4. Familiarization of GUI based Operating System environment.
5. Practice creating Icons and Folders, Creating/Opening of file, Editing and saving the
document, Copy, Cut and Paste operations, in-built utilities of OS like – Text editors,
paint, calculator, etc.
6. Practice browsing of different sites using search engine.
7. Practice Creating E-Mail accounts, Sending, Receiving of E-Mails.

Unit –II

Word Processing

1. Create a Business Letter and Personal Letter.

2. Create a Company Letterhead.
3. Create a Simple Newsletter with minimum three columns. Insert a Clip art in the
newsletter.
4. Create a Resume for a Job Application.
5. Create the cover page of a Project Report (use Word Art, insert Picture Image).
6. Prepare the class time table for your class.

Spreadsheet

1. Create a worksheet with five columns. Enter ten records and find the sum of all
columns using auto sum feature.
2. You have a monthly income of Rs.11000. Your monthly expenditures are Rent- Rs
3500, Food- Rs. 1500, Electricity- Rs.110, Phone- Rs. 160, and Cable TV-Rs. 300.
Prepare a worksheet with the Monthly Income, the Monthly Expenditures listed and
summed, monthly savings amount (what’s left over each month) calculated, and the
amount saved per day (assuming 30 days in a month).

Directorate Of Technical Education Karnataka State 15AT12P Page 2

 3. Create a worksheet containing the pay details(containing Basic pay, DA, HRA ,Other
Allowance , Deductions- PF,PT, Insurance, Gross and Net salary) of the employees
using formulas.
4. Create a Simple Bar Chart to highlight the sales of a company for three different
periods.
5. Create a Pie Chart for a sample data and give legends.

Presentation

1. Using presentation tool, Create a simple Presentation consisting of 4-5 slides about
Input and Output Devices.
2. Create a presentation about a book containing Title, Author, Publisher and Contents.
3. Create an automated (with timings & animation) Presentation with five slides about
different Models of Computers. Use Presentation tool.
Mini-project [CIE- 05 Marks]

Prepare a mini project using the above concepts of Unit-I and/or Unit-II.
∑ Repair and Overhauling of PC of laboratory
∑ Formatting of PC
∑ Servicing of UPS
∑ Prepare a report using the learned skills on Unit 1 to Unit II

Course Delivery:

The course will be delivered through tutorials of two hours and four hours of hands on
practice per week.

References:

1. Computer Fundamentals Concepts, Systems, Application, D.P.Nagapal, S.Chand

Publication, RP-2014, ISBN: 81-219-2388-3
2. http://www.tutorialsforopenoffice.org/
3. http://www.libreoffice.org/get-help/documentation/
4. http:// www.kingsoftstore.com/

S/w Tools: Any open source tool or equivalent proprietary tools

Directorate Of Technical Education Karnataka State 15AT12P Page 3

Course Assessment and Evaluation Scheme:

When/Where
To Max Evidence Course
Method What (Frequency
whom Marks collected outcomes
in the course)
Two Tests
(Average of 10 Blue books 1,2,3,4,5,6
two tests)
Record
CIE
IA Writing
(Continuous
Tests (Average
Internal 10 Record Book 1,2,3,4,5,6
marks of each
Evaluation)
Students exercise to be
computed)
Mini Project 05 Report 1,2,3,4,5,6
TOTAL 25
SEE
(Semester End End of the Answer scripts
50 1,2,3,4,5,6
End Exam course at BTE
Examination)
1, 2,3
Student Feedback on Middle of the Feedback
Delivery of
course course forms
course
1,2,3, 4,5,6
Effectiveness
Students of Delivery
End of Course End of the of
Questionnaires
Survey course instructions
&
Assessment
Methods
*CIE – Continuous Internal Evaluation *SEE – Semester End Examination
Note:
1. I.A. test shall be conducted as per SEE scheme of valuation. However obtained marks
shall be reduced to 10 marks. Average marks of two tests shall be rounded off to the next
higher digit.
2. Rubrics to be devised appropriately by the concerned faculty to assess Mini project/Student
activities.

Directorate Of Technical Education Karnataka State 15AT12P Page 4

 MODEL OF RUBRICS FOR ASSESSING STUDENT ACTIVITY/MINI PROJECT:

Note: The dimensions and scales have to be decided by the teacher based on the type of activity.

Dimension Scale Students Score

Unsatisfactory Developing Satisfactory Good(4 marks) Exemplary 1 2 3 4 5

(1 marks) (2marks) (3marks) (5marks)

1. Research and gather Does not collect Collects very Collects basic Collects more Collects a great 2
information information relate limited information information, most information, most deals of
to topic ,some relate to topic refer to the topic refer to the topic information, all
refer to the topic

2.Full fills teams roles Does not perform Performs very little Performs nearly all Performs almost all Performs all duties 3
and duties any duties assigned duties duties duties of assigned team
to the team role roles

3.Shares work equally Always relies on Rarely does the Usually does the Always does the Always does the 4
others to do the assigned work, assigned work, assigned work, assigned work,
work often needs rarely needs rarely needs without needing
reminding reminding reminding. reminding

4. listen to other team Is always talking, Usually does most Listens, but Listens and talks a Listens and talks a 5
mates never allows of the talking, rarely sometimes talk too little more than fare amount
anyone to else to allows others to much, needed.
speak speak

Grand Average/Total= (2+3+4+5)/4=14/4=3.5=4 4

Directorate Of Technical Education Karnataka State 15AT12P Page 5

Scheme of Evaluation for End Exam

SN Scheme Max. Marks

2 Testing skills/ abilities from Unit - I 10
3 Writing steps on any one from Unit -II 10
4 Execution with result 15
5 Presentation of result 05
6 Viva voce 10
Total 50
Note:
1. Candidate shall submit Lab Record for the Examination.
2. Student shall be allowed to execute directly even if he/she unable to write
the procedure
3. In case of change in experiment or no write up, marks will not be awarded
for writing procedure/steps.

Resource requirements for Basic Computer Skills Lab

(For an Intake of 60 Students [3 Batches])

Hardware requirement

Sl. No. Equipment Quantity

1 PC systems (latest configurations with speakers) 20
2 Laser Printers 03
3 Networking (Structured) with cat 6e / wireless 03
24 Port switches / Wireless Router
I/O Boxes for networking(as required)
4 Broad Band Connection 01

Software Requirement:

Linux, Libre Office / Open Office / King soft Office / any equivalent software.

Note: Students: Computers ratio in the Lab should be strictly 1:1 for a batch of twenty
Students.

Directorate Of Technical Education Karnataka State 15AT12P Page 6

 MODEL QUESTION BANK

Note: One Question from Unit-I and Unit-II

UNIT-I

1. Identify Physical components of a Computer System.

2. Demonstrate Internal and External DOS Commands and differentiate between them.
3. Create and rename the file using DOS Commands.
4. Create a directory and copy a file inside the directory using DOS Commands.
5. Demonstrate the basic formatting features in Text Editors.
6. Create two file in a folder and place the shortcut of these files on the desktop.
7. Demonstrate how search engine may be used in browsing Internet.
8. Create an email account
9. Create and Send an email with a picture attachment.
10. Demonstrate how documents can be downloaded using Internet.

UNIT-II

1. Using Word Processor Application create a Business Letter.

2. Using Word Processor Application create a Personal Letter.
3. Using Word Processor Application create a letter head for company.
4. Using Word Processor Application create a Simple Newsletter with minimum of three
columns. Insert a Clip art in the newsletter.
5. Using Word Processor Application create a Resume for a Job application.
6. Using Word Processor Application create the cover page of a Project Report (use
Word Art, insert Picture Image).
7. Prepare the class time table for your class using Word Processor Application.
8. Using Spreadsheet Application, create a worksheet with five columns. Enter ten
records and find the sum of all columns using auto sum feature.
9. You have a monthly income of Rs.11000. Your monthly expenditures are Rent- Rs
3500, Food- Rs. 1500, Electricity- Rs.110, Phone- Rs. 160, and Cable TV-Rs. 300.
Prepare a worksheet with the Monthly Income, the Monthly Expenditures listed and
summed, monthly savings amount (what’s left over each month) calculated, and the
amount saved per day (assuming 30 days in a month).Use Spreadsheet Application.

Directorate Of Technical Education Karnataka State 15AT12P Page 7

 10. Using Spreadsheet Application, create a worksheet containing the pay
details(containing Basic pay, DA, HRA ,Other Allowance , Deductions- PF,PT,
Insurance, Gross and Net salary) of the employees using formulas.
11. Using Spreadsheet Application, create a Simple Bar Chart to highlight the sales of a
company for three different periods.
12. Using Spreadsheet Application, create a Pie Chart for a sample data and give legends.
13. Using presentation tool, Create a simple Presentation consisting of 4-5 slides about
Input and Output Devices or other content.
14. Create a presentation about a book or other content containing Title, Author, Publisher
and Contents.
15. Create an automated (timings & animation) Presentation with five slides about
different Models of Computers or other content. Use Presentation tool.

Directorate Of Technical Education Karnataka State 15AT12P Page 8