Guide to Hazardous Locations

Explosive Gas Atmospheres

Ex Marking Protection Concepts Protection
Area Classification
US (NEC 500) and CA (CEC Annex J)
® Type of Protection Code Market Application Standard Principle
Flammable Material Flammable Material Flammable Material
General Requirements US Class I, Division 1 & 2 FM 3600
Present Continuously Present Intermittently Present Abnormally
Type of Protection
(optional except for I.S.) Permitted Class CA Class I, Division 1 & 2 CSA C22.2 No. 0 IEC / EU Zone 0 Zone 1 Zone 2
AEx US Class I, Division 1 & 2 ISA 60079-0 US (NEC® 505) Zone 0 Zone 1 Zone 2
Ex CA Class I, Division 1 & 2 CSA C22.2 No. 60079-0
US (NEC® 506) Division 1 Division 2
Ex EU Category 1G, 2G, & 3G EN 60079-0
Ex IEC EPL Ga, Gb, Gc IEC 60079-0 CA (CEC Section 18) Zone 0 Zone 1 Zone 2
Explosionproof for Class I, Increased Safety AEx e (or AEx eb) US Class I, Zone 1 ISA 60079-7 CA (CEC Annex J) Division 1 Division 2
Ex e CA Class I, Zone 1 CSA C22.2 No. 60079-7
Division 1, Groups A, B, C, D T5
IEC classification per IEC 60079-10-1
Ex e (or Ex eb) EU Category 2G EN E60079-7 EU classification per EN 60079-10-1
US classification per ANSI/NFPA 70 National Electrical Code® (NEC®) Article 500 or Article 505
Ex e (or Ex eb) IEC EPL Gb IEC E60079-7 CA classification per CSAC22.1 Canadian Electrical Code (CEC) Section 18 or Annex J
Ex ec EU Category 3G EN 60079-7
No arcs,
Permitted Division Temperature Class Ex ec IEC EPL Gc IEC 60079-7 sparks or
(optional except for Division 2)
Permitted Group
(T5 and T6 optional) Non-Incendive (NI)
(NI)
US
CA
Class I, Division 2
Class I, Division 2
FM 3611
CSA C22.2 No. 213
hot surfaces
Equipment Grouping
Non-Sparking AEx nA (or AEx nAc) US Class I, Zone 2 ISA 60079-15 US (NEC® 505)
Ambient temperature ranges other than standard (-25°C ≤ Ta ≤ +40°C) must be marked.
Ex nA CA Class I, Zone 2 CSA C22.2 No. 60079-15 CA (CEC Section 18)
US (NEC® 505) Ex nA (or Ex nAc) EU Category 3G EN 60079-15 EU US (NEC® 500)
Ex nA (or Ex nAc) IEC EPL Gc IEC 60079-15 Typical gas IEC CA (CEC Annex J)
American Explosionproof (XP) US Class I, Division 1 FM 3615
National Standard Acetylene Group IIC Class I/Group A
Type of Temperature Class (XP) CA Class I, Division 1 CSA C22.2 No. 30
Permitted Class Group Flameproof Ex da EU Category 1G EN 60079-1
Hydrogen (Group IIB + H2) Class I/Group B
Protection
Ex da IEC EPL Ga IEC 60079-1 Ethylene Group IIB Class I/Group C
AEx d (or AEx db) US Class I, Zone 1 ISA 60079-1
Class I, Zone 1, AEx d [ia] IIC T5 Gb Ex d CA Class I, Zone 1 CSA C22.2 No. 60079-1
Propane Group IIA Class I/Group D

Ex db EN Category 2G EN 60079-1 Methane Group I* Mining*

Explosion-Protected Gas Group Equipment Ex db IEC EPL Gb IEC 60079-1 *Not within scope of NEC . Under jurisdiction of MSHA. Not within scope of CEC.
®
Contain
Protection Level Ex dc EU Category 3G EN 60079-1 the explosion
Permitted Zone I.S. Output (optional) Ex dc IEC EPL Gc IEC 60079-1 and extinguish

Temperature Class
Ambient temperature ranges other than standard (-20°C ≤ Ta ≤ +40°C) must be marked.
Powder-Filled AEx q (or AEx qb) US Class I, Zone 1 ISA 60079-5 the flame
EU and IEC Ex q CA Class I, Zone 1 CSA C22.2 No. 60079-5
Ex q (or Ex qb) EU Category 2G EN 60079-5 US (NEC® 505)
Type of Protection Equipment Temperature Ex q (or Ex qb) IEC EPL Gb IEC 60079-5 CA (CEC) Section 18)
Protection Class Marking
Enclosed Break AEx nC (or AEx nCc) US Class I, Zone 2 ISA 60079-15 EU US (NEC® 500)
Level Group Ex nC CA Class I, Zone 2 CSA C22.2 No. 60079-15 IEC CA (CEC Annex J)
Ex nC (or Ex nCc) EU Category 3G EN 60079-15
Ex nC (or Ex nCc) IEC EPL Gc IEC 60079-15 450°C T1 T1
Ex d [ia Ga] IIC T5 Gb Intrinsic Safety (I.S.) US Class I, Division 1 FM 3610 300°C T2 T2
(I.S.) CA Class I, Division 1 CSA C22.2 No. 157
AEx ia US Class I, Zone 0 ISA 60079-11 280°C T2A
Explosion-Protected Gas Group Equipment
I.S. Output Protection Ex ia CA Class I, Zone 0 CSA C22.2 No. 60079-11 260°C T2B
Level Ex ia EU Category 1G EN 60079-11
Ambient temperature ranges other than standard (-20°C < Ta < +40°C) must be marked.
230°C T2C
Ex ia IEC EPL Ga IEC 60079-11
The Equipment Protection Level is not required to be marked if the type of protection code
includes the “a”, “b”, or “c” suffix as part of the type of protection designation, e.g. “Ex eb AEx ib US Class I, Zone 1 ISA 60079-11 215°C T2D
IIC T4” is equivalent to “Ex e IIC T4 Gb”. Ex ib CA Class I, Zone 1 CSA C22.2 No. 60079-11 200°C T3 T3
Ex ib EU Category 2G EN E60079-11 Limit
Additional EU marking per 94/9/EC (ATEX) Ex ib IEC EPL Gb IEC 60079-11 energy of
sparks
180°C T3A

CE Conformity Marking AEx ic US Class I, Zone 2 ISA 60079-11 and surface 165°C T3B
Ex ic CA Class I, Zone 2 CSA C22.2 No. 60079-11 temperature
Explosion Protection Marking 160°C T3C
Ex ic EU Category 3G EN 60079-11
Type of Exposive Atmosphere: Ex ic IEC EPL Gc IEC 60079-11 135°C T4 T4
G (for gas, vapor, mist) Note 1: For associated intrinsically safe apparatus suitable for installation in a hazardous location, the symbols for the type of protection
“ia” or “ib” are enclosed within square brackets, e.g. Class I, Zone 1, AEx d [ia] IIC T4.
120°C T4A
Note 2: For associated intrinsically safe apparatus not suitable for installation in a hazardous location, both the symbol “Ex” or “AEx” and
100°C T5 T5
1725 II 2(1) G
the symbol for the type of protection “ia” or “ib” are enclosed within the same square brackets, e .g. [AEx ia] IIC; in this case, a temperature
class is not included.
85°C T6 T6
Limited Energy AEx nC (or AEx nCc) US Class I, Zone 2 ISA 60079-15
Ex nL CA Class I, Zone 2 CSA C22.2 No. 60079-15

Ingress Protection (IP) Codes

Identification Number of Notified Body Category for I.S. Output Ex nL (or Ex nLc) IEC EPL Gc IEC 60079-15
Involved in Production Control Stage Category Pressurized Type X US Class I, Division 1 FM 3620 (NFPA 496)
Equipment Group 1 (for Zone 0) Type X CA Class I, Division 1 NFPA 496
I (for mines) 2 (for Zone 1) Type Y US Class I, Division 1 FM 3620 (NFPA 496) First characteristic Numeral Second characteristic Numeral
II (for other than mines) 3 (for Zone 2) Type Y CA Class I, Division 1 NFPA 496
Type Z US Class I, Division 2 FM 3620 (NFPA 496) Protection against solid bodies Protection against liquid
Type Z CA Class I, Division 2 NFPA 496
AEx px (or AEx pxb) US Class I, Zone 1 ISA 60079-2 0 No protection No protection

EPL/Category Ex px
Ex px (or Ex pxb)
CA
EU
Class I, Zone 1
Category 2G
CSA C22.2 No. 60079-2
EN 60079-2
1
2
Objects greater than 50mm
Objects greater than 12mm
Vertical (90˚) dripping water
75˚ to 90˚ dripping water
Typical Zone Ex px (or Ex pxb) IEC EPL Gb IEC 60079-2
Definition IEC EU (ATEX) 3 Objects greater than 2.5mm Sprayed water
AEx py (or AEx pyb) US Class I, Zone 1 ISA 60079-2
EPL Group Category Group of Application Ex py CA Class I, Zone 1 CSA C22.2 No. 60079-2 4 Objects greater than 1mm Splashed water
Mines, “very high” Ex py (or Ex pyb) EU Category 2G EN 60079-2
Ma M1 5 Dust-protected Water jets
level of protection Ex py (or Ex pyb) IEC EPL Gb IEC 60079-2
I I N/A
Mines, “high”
Mb M2
AEx pz (or AEx pzc) US Class I, Zone 2 ISA 60079-2 6 Dust-tight Heavy seas
level of protection Ex pz CA Class I, Zone 2 CSA C22.2 No. 60079-2
Ex pz (or Ex pzc) EU Category 3G EN 60079-2
7 Temporary immersion
Gas atmospheres,
“very high” level Ga 1G 0 Ex pz (or Ex pzc) IEC EPL Gc IEC 60079-2 8 Continuous immersion
of protection Note 3: For associated equipment used with pressurized equipment, such as a pressurization control system installed within the hazardous
9 High pressure/temperature water jet
location, the symbol for the Type of Protection is enclosed within square brackets e.g. Ex d [p] IIC T4 Gb.
Gas atmospheres, Note 4: The associated equipment not suitable for installation in a hazardous location, both the symbol “Ex” or “AEx” and the symbol “p”
“high” level of Gb II 2G II 1 are enclosed within the same square brackets, e.g. [Ex p]. In this case, a temperature class is not included. Keep
protection
Restricted Breathing AEx nR (or AEx nRc) US Class I, Zone 2 ISA 60079-15
flammable Approximate U.S. enclosure type equivalent to IPXX
gas out
Gas atmospheres, Ex nR CA Class I, Zone 2 CSA C22.2 No. 60079-15
“enhanced” level Gc 3G 2 Type IP Type IP Type IP
Ex nR (or Ex nRc) EU Category 3G EN 60079-15
of protection
Ex nR (or Ex nRc) IEC EPL Gc IEC 60079-15 1 10 3S 54 6 and 6P 67
Level of protection assigned to equipment based on its likelihood of
becoming a source of ignition Encapsulation AEx ma US Class I, Zone 0 ISA 60079-18
Ex ma CA Class I, Zone 1 CSA C22.2 No. 60079-18 2 11 4 and 4X 55 12 and 12K 52
Ex ma EU Category 1G EN 60079-18
3 54 5 52 13 54
Ex ma IEC EPL Ga IEC 60079-18
AEx m US Class I, Zone 1 ISA 60079-18 3R 14
AEx mb US Class I, Zone 1 ISA 60079-18
Ex mb CA Class I, Zone 1 CSA C22.2 No. 60079-18
Ex mb IEC EPL Gb IEC 60079-18
Ex mb
AEx mc
EU
US
Category 2G
Class I, Zone 2
EN 60079-18
ISA 60079-18
Acronyms
Ex mc CA Class I, Zone 2 CSA C22.2 No. 60079-18 ATEX Atmosphère explosible
Ex mc EU Category 3G EN 60079-18 CA Canada
Ex mc IEC EPL Gc IEC 60079-18
CEC Canadian Electrical Code (CSA C22.1)
Oil Immersion AEx o (or AEx ob) US Class I, Zone 1 ISA 60079-6
Ex o CA Class I, Zone 1 CSA C22.2 No. 60079-6 EPL Equipment Protection Level
Ex o (or Ex ob) EU Category 2G EN 60079-6 EU European Union
Ex o (or Ex ob) IEC EPL Gb IEC 60079-6
Ex oc EN Category 3G EN 60079-6 IEC International Electrotechnical Commission
Ex oc IEC EPL Gc IEC 60079-6 I.S. Intrinsic Safety
MSHA Mine Safety and Health Administration
FM Approvals
1151 Boston-Providence Turnpike, Norwood, MA 02062-9102 FM Approvals is your global conformity assessment solution NFPA
NEC
National Fire Protection Association
National Electrical Code (NFPA 70)
Phone: +1 (1)781 255 4851 Fax: +1 (1)781 762 9375
US United States of America
E-mail: [email protected] Market Recognized product certification marks
In the United Kingdom: FM Insurance Company Limited
1 Windsor Dials, Windsor, Berkshire, SL4 1RS U.S. C US

Authorized by the Prudential Regulation Authority and regulated by the

Financial Conduct Authority and the Prudential Regulation Authority.
Canada C C US
P0296 © 2013 FM Approvals
(05/2015) All rights reserved.
fmapprovals.com EU (ATEX)
FM Approvals can also issue IECEx Test Reports, Quality Assessment Reports and Certificates of Conformity.