Scribd
Upload
49 views

ENT 256 Machine Design Mechanism Design 05/03/2007

This document outlines a lecture on mechanism design. The objective is to describe mechanism synthesis and design various mechanisms including slider-crank, crank-rocker, and four-bar mechanisms using graphical methods. The chapter will cover time ratios, designing slider-crank mechanisms, crank-rocker mechanisms, mechanisms to move a link between two positions, and mechanisms to move a link between three positions. Example problems are provided on time ratio calculations and determining time ratios and stroke times given design parameters.

Uploaded by

Melvin Mhds
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
49 views

ENT 256 Machine Design Mechanism Design 05/03/2007

This document outlines a lecture on mechanism design. The objective is to describe mechanism synthesis and design various mechanisms including slider-crank, crank-rocker, and four-bar mechanisms using graphical methods. The chapter will cover time ratios, designing slider-crank mechanisms, crank-rocker mechanisms, mechanisms to move a link between two positions, and mechanisms to move a link between three positions. Example problems are provided on time ratio calculations and determining time ratios and stroke times given design parameters.

Uploaded by

Melvin Mhds
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

ENT 256 CHAPTER 5 MACHINE DESIGN

LECTURE 8 MECHANISM DESIGN 05/03/2007

MECHANISM DESIGN

OBJECTIVE

1. Describe mechanism synthesis.


2. Design an in-line slider-crank mechanism.
3. Knowing the desired mechanism time ratio, determine an appropriate
imbalance angle.
4. Using graphical methods, design offset slider-crank and crank-rocker
mechanisms.
5. Using graphical methods, design a single-pivoted link to move
between two prescribed positions.
6. Using graphical methods, design a four-bar mechanism in which the
coupler link moves between two prescribed positions.
7. Using graphical methods, design a four-bar mechanism where the
coupler link moves between three prescribed positions.

CHAPTER OUTLINE

1. Time Ratio
2. Design of slider-crank mechanisms.
3. Design of crank-rocker mechanisms.
4. Mechanism to move a link between two position.
5. Mechanism to move a link between three positions.

DR. HAFTIRMAN 1
UNIVERSITI MALYASIA PERLIS
ENT 256 CHAPTER 5 MACHINE DESIGN
LECTURE 8 MECHANISM DESIGN 05/03/2007

DR. HAFTIRMAN 2
UNIVERSITI MALYASIA PERLIS
ENT 256 CHAPTER 5 MACHINE DESIGN
LECTURE 8 MECHANISM DESIGN 05/03/2007

DR. HAFTIRMAN 3
UNIVERSITI MALYASIA PERLIS
ENT 256 CHAPTER 5 MACHINE DESIGN
LECTURE 8 MECHANISM DESIGN 05/03/2007

DR. HAFTIRMAN 4
UNIVERSITI MALYASIA PERLIS
ENT 256 CHAPTER 5 MACHINE DESIGN
LECTURE 8 MECHANISM DESIGN 05/03/2007

DR. HAFTIRMAN 5
UNIVERSITI MALYASIA PERLIS
ENT 256 CHAPTER 5 MACHINE DESIGN
LECTURE 8 MECHANISM DESIGN 05/03/2007

DR. HAFTIRMAN 6
UNIVERSITI MALYASIA PERLIS
ENT 256 CHAPTER 5 MACHINE DESIGN
LECTURE 8 MECHANISM DESIGN 05/03/2007

DR. HAFTIRMAN 7
UNIVERSITI MALYASIA PERLIS
ENT 256 CHAPTER 5 MACHINE DESIGN
LECTURE 8 MECHANISM DESIGN 05/03/2007

DR. HAFTIRMAN 8
UNIVERSITI MALYASIA PERLIS
ENT 256 CHAPTER 5 MACHINE DESIGN
LECTURE 8 MECHANISM DESIGN 05/03/2007

DR. HAFTIRMAN 9
UNIVERSITI MALYASIA PERLIS
ENT 256 CHAPTER 5 MACHINE DESIGN
LECTURE 8 MECHANISM DESIGN 05/03/2007

DR. HAFTIRMAN 10
UNIVERSITI MALYASIA PERLIS
ENT 256 CHAPTER 5 MACHINE DESIGN
LECTURE 8 MECHANISM DESIGN 05/03/2007

DR. HAFTIRMAN 11
UNIVERSITI MALYASIA PERLIS
ENT 256 CHAPTER 5 MACHINE DESIGN
LECTURE 8 MECHANISM DESIGN 05/03/2007

DR. HAFTIRMAN 12
UNIVERSITI MALYASIA PERLIS
ENT 256 CHAPTER 5 MACHINE DESIGN
LECTURE 8 MECHANISM DESIGN 05/03/2007

Problems of time ratio calculations

A quick-return mechanism is to be designed where the outward stroke


consumes t1 and the return stroke t2. Determine the time ratio, imbalance
angle, and speed at which the mechanism should be driven.
t1 = 1.1 sec, t2 = 0.8 sec
Solution
t1 1.1sec
Q= = = 1.375
t 2 0.8 sec
⎛ 1.375 − 1 ⎞
β = 180°⎜ ⎟ = 24.42°
⎝ 1.375 + 1 ⎠
1rev rev
ω= = 0.526 = 31.6rpm
(1.1 + 0.8)sec sec

A quick-return mechanism drives at ω rpm and has an imbalance angles of


β . Determine the time ratio and the time to complete the outward and return
strokes.
ω = 180 rpm, β = 25°
Solution
rev sec
ω = 180rpm = 3 = 0.33
sec rev
180 + 25
Q= = 1.322
180 − 25
t1 0.33Q
Q= => t1 = = 0.188 sec
0.33 −t 1 Q +1
t1 0.188
t2 = = = 0.1422
Q 1.322

DR. HAFTIRMAN 13
UNIVERSITI MALYASIA PERLIS

You might also like