®

Circular Knurling Information

TPI and Circular Pitch Calculations General Purpose Knurling

The formula for finding the Transverse Teeth Per Inch (TPIt), if For general purpose knurling, only limited dimensions are
the Normal Teeth Per Inch (TPIn) is known, is shown below. necessary.

• TPI (Teeth Per Inch)

TPIt=TPIn x Cos 30° (.86603) • Work Blank Diameter
• Knurled Diameter

The formula for finding the Transverse Circular Pitch (Pt), if the
Circular Pitch (P) is known, is shown below.

P
Pt=
Cos 30° (.86603)

TPI and Circular Pitch Examples

Find the Transverse Pitch if the Normal Pitch is 20 TPI.
Precision Knurling
Knurled diameters and the circular pitch of the knurl are
TPIt = TPIn x Cos 30° = 20 x .86603 = 17.32 TPIt
related. The circumference of the work blank should be an
approximate multiple of the circular pitch for straight knurling
Find the Transverse Circular Pitch if the Normal Circular Pitch and transverse circular pitch for diagonal and diamond knurling.
is .0500. Blank diameters vary with the circular pitch of the knurling
selected, and should only be specified after the proper diameter
Where .0500 is the Normal Circular Pitch of 20 TPI. of blank is determined by experimentation.

Pt = Pn ÷ Cos 30° = .0500 ÷ .86603 = .0577 Circular Transverse

Pitch

Straight Knurl - Tooth and Pitch Calculations

Tooth Depth
Depth of tooth is in direct relationship with circular pitch knurl
with approximate percentages which will vary, accordingly to P= 1.000 Nw= 3.1416 x Dw
material, speed, and feed used in knurling. TPI P

Tool Depth with

P x Nw Nw
Standard Circular Pitch Knurl D w= TPI=
3.1416 3.1416 x Dw
Type of Knurl Percentage affecting Depth of Knurl
Straight Tooth 35% of circular pitch (P)
Diagonal 35% of normal circular pitch (Pn)
Where: Dw=Theoretical work blank diameter.
Diamond Male 40% of normal circular pitch (Pn)
Diamond Female 25% of normal circular pitch (Pn) Nw=Number of teeth on work.
P=Circular pitch.
TPI=Number of teeth per inch measured
1.000
Where circular pitch= on circumference of blank diameter.
TPI

Tooth Depth Examples

Find the circular pitch and depth of tooth for a straight tooth knurl
and has 20 TPI.

P= 1.000 = .0500 Circular Pitch

20 TPI

Tool Depth= .0500 x 35%= .0175

DORIAN TOOL INT'L P.O. BOX 770785 HOUSTON, TX 77215 1-800-627-0266 713-341-5267 409-282-2861 FAX: 409-282-2951

B-IX
 ®

Circular Knurling Information

Diagonal & Diamond Knurl Work Blank Diameters

Tooth & Pitch Calculations The diameter of the blank has a definite relation to the proper
tracking of the knurl on its original contact with the work. The
Nw Nw TPIt
TPIt= or TPIn x cos Ø TPIn= or circumference of the work blank should be an approximate
3.1416 x Dw 3.1416 x Dw x cos Ø cos Ø multiple of the circular pitch of straight knurls and the transverse
circular pitch of diagonal knurls. With improper blank diameters,
the teeth of the knurl as they continue to feed into the work fail
Nw=3.1416 x D w x TPIt
or 3.1416 x Dw x TPIn x cos Ø to mesh with the indentations made during the first revolution of
the blank. Blanks for straight knurling should be free of taper
and the surface of the blank reasonably smooth. Blank diameters
also differ with knurling conditions such as materials and
variations of practice.
Improper and varying blank diameters result in reduced knurl
life, poor finish, double teeth, uneven tooth profile, and inability
to obtain uniformity of number of teeth and knurled diameter on
the work.
The knurled diameter is larger than the unknurled blank by an
amount approximately equal to the tooth depth of the knurl used.
Blank diameters for knurling are therefore approximately equal
to the knurled diameter minus the depth of the tooth. It is
important, therefore, that the work blank does not contain more
than the correct amount of material required to form the finished
knurled diameter. As variation in the blank diameter results in
variation of knurled diameter, it is necessary that the blank
diameter tolerances be controlled according to the accuracy of
the knurling to be produced. Uniformity of blanks is required to
produce uniform knurling.
P x Nw
Dw= Theoretical work blank diameter. Dw=
3.1416
Pt x N Pn x N w Nw= Number of teeth on work.
3.1416 x Dw 3.1416 x Dw x cos Ø Dw= or
N w= or 3.1416 3.1416 x cos Ø
Pt Pn P= Circular pitch on the work blank diameter 3.1416 x Dw
N w=
for straight knurling. The transverse P
circular pitch is used for diagonal and
diamond knurling. 3.1416 x Dw
P=
Nw

Work Blank Diameter Examples

Determine the approximate blank diameter for rolling 60
straight teeth on a knurled surface with a 20 TPI knurl.

P x Nw .0500 x 60
Dw= = = .955 approx. blank diameter
3.1416 3.1416

Where P=.0500 (circular pitch for 20 TPI)

Determine the approximate number of diagonal teeth that

can be rolled on a blank .625" diameter, with a 30 normal TPI
knurl, and having a 30° helix angle.

3.1416 x Dw 3.1416 x .625

Nw= = = 51 teeth
P .0385

Where P=.0385 (transverse circular pitch for 30 TPI)

Where: Dw=Theoretical work blank diameter. 1.000 A proportional formula frequently used for selecting the
P=
Nw=Number of teeth on work. TPI
diameter and number of teeth on a given work blank is shown
P=Circular pitch. below. It enables one to easily visualize the relationships of the
Pn=Normal circular pitch. Pn diameters and teeth on both the knurling of the work and the
Pt = knurl. With several of these elements as variables, proportions
Pt=Transverse circular pitch. .86603
TPI=Number of teeth per inch measured can be quickly established that permit a single solution of
on circumference of blank diameter. knurling problems.
TPIn=Normal teeth per inch. Where: Dw=Diameter of the work blank. Dk
Dw
TPIt=Transverse teeth per inch. Nw=Number of teeth on the work blank. =
Dk=Outside diameter of the knurl. Nw Nk
Ø =Helix angle (cos 30°=.86603).
Nk=Number of teeth on the knurl.

DORIAN TOOL INT'L P.O. BOX 770785 HOUSTON, TX 77215 1-800-627-0266 713-341-5267 409-282-2861 FAX: 409-282-2951

B-X
 ®

Circular Knurling Information

Knurled Diameters Dimensioning of Diametral and

The approximate increase in blank diameters for different Circular Pitch Knurling
teeth per inch with straight, diagonal, and diamond pattern Uniform drafting practice is desirable and dimensioning
knurling is shown below. The amount of increase shown is should include length and knurled diameter of the knurling and
based on knurling soft steels and should be used as a guide specifications of the teeth. The method of dimensioning diameters
only. The amount of increase varies slightly with different and tooth specifications is important as improper use of
materials. dimensions may result in considerable confusion.
When the full depth of the knurl is not required (no sharp
points), penetrate the work blank to displace at least 75% of the Always specify the tooth pattern of the knurling, stating
knurl tooth depth. This insures proper tracking of the knurl on whether it is straight, diagonal, or diamond pattern. Mention
the work. whether the diagonal knurling is right or left hand, and indicate
Care should be exercised not to specify knurled diameters the angle of the helix.
with too few teeth. Consideration should be also given to the
length of the knurling and the pressure required to force the knurl
into the work. The greatest pressures are exerted by the coarser
pitches with in-feed knurling using single knurls. Wide knurls
require more pressure than narrow knurls. The following
tabulation may be used as a guide in selecting the smallest
knurled diameters to use for knurling with different number of
teeth per inch (TPI) and widths of knurl faces.

Minimum Knurled Diameters

For In-feed Rolling with Circular Pitch Knurls on General Applications
*†TPI Standard Width of Knurl Face
(Teeth Per Inch) 3/16 1/4 3/8
16 — 13/32 1/2
20 5/16 11/32 7/16
25 1/4 9/32 3/8
30 7/32 1/4 5/16
35 3/16 7/32 9/32
40 5/32 3/16 1/4
50 1/8 5/32 7/32
80 5/64 7/64 11/64

* Based on rolling conditions satisfactory for knurling and work

being right and properly supported.
† Refers to normal TPI on diagonal knurling.

Approximate Diameter Increase of Blank

with Standard Circular Pitch Knurls
*Teeth **Diamond Knurling
Straight and Diagonal**
Per
Knurling
Inch Male (Raised Points) Female (Depressed Points)
12 .034 .038 —
16 .025 .029 —
20 .020 .023 .014
25 .016 .018 .011
30 .013 .015 .009
35 .011 .013 —
40 .009 .010 —
50 .009 .010 .007
80 .005 .006 —
* Refers to normal teeth per inch on diagonal and diamond knurling.
** With 30° helix angle.

DORIAN TOOL INT'L P.O. BOX 770785 HOUSTON, TX 77215 1-800-627-0266 713-341-5267 409-282-2861 FAX: 409-282-2951

B-XI