Product Specifications
E14F05P16
Twin Diplexer, 1695-2200/2300-2700 MHz, dc bypass all ports, 4.3-10 connectors
l Industry leading PIM performance
l New 4.3-10 connectors for improved PIM performance and size reduction
l Twin configuration
l Designed for network Modernization, introduction of LTE1800 on existing site
l Designed for network modernization application, introduction of LTE2300 and
LTE2600 on existing site
l dc/AISG pass-through on all frequency ports
General Specifications
Product Type Diplexer
Product Family CBC1726
Modularity 2-Twin
Includes Mounting hardware
Electrical Specifications
Sub-module 1|2 1|2
Branch 1 2
Port Designation 1695-2200 2300-2690
AWS 1700
DCS 1800 IMT 2600
License Band
IMT 2100 WCS 2300
PCS 1900
Electrical Specifications, Band Pass
Frequency Range 1695–2200 MHz 2300–2700 MHz
Insertion Loss, typical 0.20 dB 0.20 dB
Total Group Delay, maximum 30 ns 30 ns
Return Loss, typical 20 dB 20 dB
Isolation, minimum 50 dB 50 dB
Input Power, RMS, maximum 300 W 300 W
Input Power, PEP, maximum 3500 W 3500 W
3rd Order PIM, typical -160 dBc -160 dBc
3rd Order PIM Test Method Two +43 dBm carriers Two +43 dBm carriers
Product Classification
Product Type Diplexer
dc Power/Alarm Electrical Specifications
dc/AISG Pass-through Path Branch 1 | Branch 2
dc/AISG Pass-through, combiner Branch 1 | Branch 2
Lightning Surge Current 3 kA
©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 4
All specifications are subject to change without notice. See [Link] for the most current information. Revised: May 16, 2018 June 18, 2018
Product Specifications
E14F05P16
Lightning Surge Current Waveform 10/350 waveform
Electrical Specifications
Impedance 50 ohm
©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 2 of 4
All specifications are subject to change without notice. See [Link] for the most current information. Revised: May 16, 2018 June 18, 2018
Product Specifications
E14F05P16
Block Diagram
Mechanical Specifications
RF Connector Interface 4.3-10 Female
RF Connector Interface Body Style Long neck
RF Connector Length 35 mm
Ground Screw Diameter 6.00 mm
Color Gray
Mount Type Pole | Wall
Mounting Pipe Diameter 42.6–122 mm
Mounting Pipe Hardware Band clamps (2)
Dimensions
Height 152.0 cm | 59.8 in
Width 119.0 cm | 46.9 in
Depth 123.0 mm | 4.8 in
Volume 2.3 L
Weight 3.8 kg | 8.4 lb
Weight, without mounting hardware 3.3 kg | 7.3 lb
Environmental Specifications
Operating Temperature -40 °C to +60 °C (-40 °F to +140 °F)
Relative Humidity Up to 100%
Ingress Protection Test Method IEC 60529:2001, IP67
©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 3 of 4
All specifications are subject to change without notice. See [Link] for the most current information. Revised: May 16, 2018 June 18, 2018
Product Specifications
E14F05P16
Outline Drawing
©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 4 of 4
All specifications are subject to change without notice. See [Link] for the most current information. Revised: May 16, 2018 June 18, 2018
