The document describes an InteliLite controller for single generator applications. It provides key features, technical specifications, and dimensions of the controller. Extension modules are also available to add functionality to the controller.
The document describes an InteliLite controller for single generator applications. It provides key features, technical specifications, and dimensions of the controller. Extension modules are also available to add functionality to the controller.
The document describes an InteliLite controller for single generator applications. It provides key features, technical specifications, and dimensions of the controller. Extension modules are also available to add functionality to the controller.
The document describes an InteliLite controller for single generator applications. It provides key features, technical specifications, and dimensions of the controller. Extension modules are also available to add functionality to the controller.
Datasheet Product description Compact gen-set controller for single gen-set Application overview operating in standby mode Meets all requirements for Auto Mains Failure (AMF) applications Full gen-set monitoring and protection
Key features Outstanding EFI engine support with diagnostic messages in plain text via J1939 Running hours event and performance log Plug-in extension modules capability Supports prime power (MRS) applications Automatic and manual GCB and MCB control D+ preexcitation terminal True RMS measurement 3 phase power measurement of gen-set and mains
| InteliLite NT Datasheet | Related HW ver: 1.6 | Related SW ver: 2.2 | Date of issue: 2019-02-04 Technical data Power supply Max. measured 9A current Power supply 8-36 V DC Max. allowed range 10 A continuous, 50 A/1 s current Power supply 100 ms (from min. 10 V) Current accuracy 2 % from nominal current drop-out immunity Power approx. 100 mA / 8 V; 40 mA / 36 Binary inputs consumption V Number 4 non-isolated Peak power approx. 0,33 A / 8 V; 0,18 A / 36 V Input resistance 4.2 kΩ consumption (LT) Common pole Positive, V = 8-36 V DC Backup battery s CR 1225 type Close/Open 0-0.8 V close contact
Estimated backup indication 2 - 36 V - V open contact
s 10 years battery lifetime Binary outputs Operating conditions Number 6 non-isolated Operating Operating voltage 8-36 V DC -20 ˚C to +70 ˚C temperature Switching to Negative supply terminal Operating Max current 0.5 A (2 A per group) temperature (LT -40 ˚C to +70 ˚C version) Analog inputs Operating 95 % w/o condensation Number 3, non-isolated humidity (IEC/EN 60068-2-30) Electrical range 0-2500 Ω Protection degree IP 65 10 bits, 4 digits (front panel) Resolution
5-25 Hz, ± 1.6 mm Precision 2 % from measured value
Vibration 25-100 Hz, a = 4 g Predefined: VDO 10Bar, VDO Shocks a 500 m/s2 Supported sensor Temperature, VDO Fuel level max types User-defined: 10 points non-linear Storage sensors can be defined by the user -30 ˚C to +80 ˚C temperature Communication Voltage measurement External modules, 250 kbps, max Measurement 3 ph-n Gen voltage CAN1 200 m inputs 3 ph mains voltage
Measurement type True RMS Magnetic pick-up
Voltage range 480 V Ph-Ph (277 V Ph-N) Voltage input 2–70V range pp Max. measured 340 V Ph-N voltage 4 Hz to 10 kHz Frequency input Voltage accuracy 2 % from nominal voltage (min 2 V @ 4 Hz, 6 V @ 10 range pp pp kHz) Frequency range 30-70 Hz, measured from L3
Frequency Frequency 0.05 Hz 0.2 % accuracy measurement tolerance Current measurement D+ Measurement 3 ph generator current 250 mA, during the engine start inputs Excitation current only Measurement type True RMS Charging fail Current range 5A 80 % of Usupply threshold
InteliLite NT Datasheet 2 Display Type Build-in monochromatic Resolution 128 × 64 px
InteliLite NT Datasheet 3 Dimensions, terminals and mounting
Note: Parameter x includes reserve for connectors of plug-in modules.
Note: The controller is to be mounted onto the switchboard door. The requested cut-out size is 175x115 mm. Use the screw holders delivered with the controller to fix the controller into the door.
InteliLite NT Datasheet 4 Available extension modules Product Description Order code
IL-NT AOUT8 8 analog outputs packed in a unit IL-NT-AOUT8
IL-NT BIO8 8 binary inputs in a unit (HW switchable to 8 binary outputs) IL-NT-BIO8 IL-NT RS232 Communication module which provides additional RS232 interface for controller IL-NT-RS232 IL-NT RS232-485 Communication module which provides additional RS232 and RS485 interface for controller IL-NT-RS232-485 IL-NT GPRS Communication module with integrated GSM modem with GPRS Internet connection IL-NT-GPRS IL-NT S-USB Communication module which provides additional USB interface for controller IL-NT-S-USB
Related products Product Description Order code
IL-NT RD (SW) Remote Display Software for InteliLite NT IL-NT RD
Functions and protections
Description ANSI code Descritption ANSI code
Overvoltage 59 Overfrequency 81H
Undervoltage 27 Underfrequency 81L
Gas (Fuel) Level 71 Overload 32
Phase Rotation 47 Overcurrent 50+51
Certificates and standards
EN 61010-1:95 +A1:97
EN 61000-6-3:2006
EN 61000-6-3:2006
EN 61000-6-1:2005
EN 61000-6-2:1999
List of standards is available on: https://webstore.iec.ch/
