Scribd
Upload
300 views3 pages

Spring Calculation

This document provides specifications and calculations for a copper spring. It specifies the spring has an outer diameter of 20mm, 331 coils, and a length of 730mm. The calculations determine: - The pitch is 2mm - The inner diameter is 19mm - The maximum compression is 346.95mm - The spring index is 2, which is the ratio of the mean coil diameter to the wire diameter.

Uploaded by

Akshay Jadhav
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
Download as docx, pdf, or txt
300 views3 pages

Spring Calculation

This document provides specifications and calculations for a copper spring. It specifies the spring has an outer diameter of 20mm, 331 coils, and a length of 730mm. The calculations determine: - The pitch is 2mm - The inner diameter is 19mm - The maximum compression is 346.95mm - The spring index is 2, which is the ratio of the mean coil diameter to the wire diameter.

Uploaded by

Akshay Jadhav
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1/ 3

Spring calculation:

Specification:

Material: copper

Outer diameter (Do) =2cm=20mm

Number of coil: 331

Length=73cm=730mm

Calculation:

1. Pitch: The pitch of the coil is defined as the axial distance between adjacent coils in
Uncompressed state. Mathematically,

𝐋𝐟
Pitch=𝐧′−𝟏 …………………………………….(1)

Where;

Lf=Free length (it is the whole length of spring)

730
Pitch=331−1 …………………using equation no.1

730
=330

Pitch=2
2. Free length=Lf=n*d+(n-1)…………………(2)
Where;

n = Number of active turns,


p = Pitch of the coils, and
d = Diameter of the spring wire

n’=number of turns(coils)

 n=n’-2

=331-2

n =329

 730=329(d)+(329-1)…………………………(using equation no.2)

d=1.221 mm

d=1mm

3. Inner diameter(Di)=outer diameter-(d)


=20-1
Di=19mm

4. free length=LF = Solid length + Maximum compression + *Clearance between adjacent


coils (or clash allowance)…………….(3)

where;

Solid length. When the compression spring is compressed until the coils come in contact with
each other, then the spring is said to be solid. The solid length of a spring is the product of total
number of coils and the diameter of the wire. Mathematically,
Solid length of the spring,
LS = n'.d
n' = Total number of coils, and
d = Diameter of the wire.

LF = n'.d + δmax + 0.15 δmax……………(using equation 3)

730=331(1) + (1.15) δmax

δmax=346.95mm

5. Spring index:-The spring index is defined as the ratio of the mean diameter of the coil to
the diameter of the wire. Mathematically
D = Mean diameter of the coil, and
d = Diameter of the wire.

𝐃
C= …………………………………………………(4)
𝐝

2
=
1

C=2

You might also like