Scribd
Upload
84 views1 page

Prestressing Calculation

This document contains calculations to determine stresses in a prestressed concrete member with a prestress force of 1800 KN applied at an eccentricity of 150 mm. The member has dimensions of 500x500 mm and experiences an external moment of 300 KNm. Stresses were calculated at the center line and end and show compression at the top and bottom at the center, and tension at the top and compression at the bottom at the end.

Uploaded by

Jay Parmar
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
Download as xlsx, pdf, or txt
84 views1 page

Prestressing Calculation

This document contains calculations to determine stresses in a prestressed concrete member with a prestress force of 1800 KN applied at an eccentricity of 150 mm. The member has dimensions of 500x500 mm and experiences an external moment of 300 KNm. Stresses were calculated at the center line and end and show compression at the top and bottom at the center, and tension at the top and compression at the bottom at the end.

Uploaded by

Jay Parmar
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
Download as xlsx, pdf, or txt
Download as xlsx, pdf, or txt
You are on page 1/ 1

Prestress force (P) 1800 KN

eccentricity (e) 150 mm


Moment from analysis (M) 300 KNm

DIMENSION OF MEMBER
Width (B) 500 mm
Depth (D) 500 mm

AREA(A) 250000 mm^2


INERTIA (I) 5208333333 mm^4
Z = (I/Ymax) 20833333 mm^3
Moment due to P (Mp) 270 KNm

AT CENTER LINE
Stress at top = (P/A)-(Mp/Z)+(M/Z) 8.64 N/mm^2
Stress at btm = (P/A)+(Mp/Z)-(M/Z) 5.76 N/mm^2

AT END
Stress at top = (P/A)-(Mp/Z) -5.76 N/mm^2
Stress at btm = (P/A)+(Mp/Z) 20.16 N/mm^2

+VE shows compression and -VE shows tension stresses

You might also like