4th Quarter Examination

Technology and Livelihood Education 8

Name: _________________________________ Score: _________

I. Multiple Choice. Write the letter of the correct answer on the space before the number.
_____ 1. A stuff upon which a thing is made.
A. Material B. Tools C. Equipment D. Machine
_____ 2. A simple implement, as a hammer, saw, and spade chisel etc. used in work.
A. Material B. Tools C. Equipment D. Machine
_____ 3. It is a thin cross laminated sheet of wood.
A. Board B. Lumber C. Plywood D. Plank
_____ 4. Made of metal used for fastening woods.
A. Glue B. Screw C. Bolt D. Nails
_____ 5. It is a powdered substance mixed with water.
A. Cement B. Sand C. Gravel D. Powder
_____ 6. It is a fine, dry, gritty substance.
A. Cement B. Sand C. Gravel D. Powder
_____ 7. It is a sawn timber.
A. Board B. Plywood C. Lumber D. Plank
_____ 8. It is used for vertical alignment.
A. Divider B. Try square C. Compass D. Plumb bob
_____ 9. Coarse aggregate.
A. Gravel B. Sand C. Cement D. Powder
_____ 10. It is used for driving and pulling out nails.
A. Electric Drill B. Claw Hammer C. Mallet D. Wrench
_____ 11. It is a tool used for cutting along the grain.
A. Backsaw B. Dovetail C. Ripsaw D. Cross Cut Saw
_____ 12. 12-inch or one foot rule and it is used to take/make simple measurements.
A. Try square B. Caliper C. Meter stick D. Ruler
_____ 13. Tool with two metal legs used to lay-out an arc circle or step off division on a line.
A. Divider B. Compass C. Chalk line D. Pencil
_____ 14. Tool used to trim and shape wood.
A. Plane B. Chisel C. Cabinet Scrapper D. Spoke Shave
_____ 15. A small back saw with a straight chisel type handle used to cut very fine joints.
A. Compass Saw B. Turning Saw C. Dovetail D. Coping Saw
_____ 16. Used for sharpening edge cutting tools such as chisel.
A. Saw Set B. Nail Set C. Files D. Oil Stone
_____ 17. Used to apply paint or varnish on wood surfaces.
A. Paint Brush B. Toothbrush C. Footbrush D. Steel Brush
_____ 18. Hand saw used to cut the wood across the grain.
A. Backsaw B. Cross Cut Saw C. Ripsaw D. Coping Saw
_____ 19. A portable power tool used for sanding furniture pieces.
A. Jigsaw B. Router C. Sander D. Circular Saw
_____ 20. Used to protect the eyes against flying debris and harmful liquids.
A. Ear Protector B. Face Mask C. Gloves D. Goggles
_____ 21. Used to protect the ears against high frequency noise.
A. Ear Protector B. Face Mask C. Gloves D. Goggles
_____ 22. Used to prevent the inhalation of sprayed paint fumes.
A. Ear Protector B. Face Mask C. Gloves D. Goggles
_____ 23. Used to protect the hands while working.
A. Ear Protector B. Face Mask C. Gloves D. Goggles
_____ 24. Used to protect the worker against flying debris.
A. Face Mask B. Ear Protector C. Goggles D. Apron
_____ 25. Used to drive and loose screws.
A. Screwdriver B. Hammer C. Wrench D. Mallet
_____ 26. How many inches are there in 8 feet?
 A. 96 B. 86 C. 76 D. 66
_____ 27. How many inches are there in 3 feet?
A. 26 B. 56 C. 36 D. 16
_____ 28. Convert 1/4 to decimal number.
A. 0.35 B. 0.12 C. 0.25 D. 0.20
_____ 29. Convert 6 3/5 to decimal number.
A. 96 B. 86 C. 76 D. 66
_____ 30. Convert 1 1/3 to decimal number.
A. 2.34 B. 3.66 C. 3.20 D. 4.05

II. Identification. Identify the Alphabet of Lines and choose your answer in the box. Write your answer on the space
provided before the number.

Dimension, Extension & Leader line Center line Visible line Shortbreak line Cutting/Viewing line
Section line Hidden line Phantom line Longbreak line

__________ 31. ___________ 36.

__________ 32. ___________ 37.

__________ 33. ___________ 38.

__________ 34. ___________ 39.

__________ 35.

III. True or False. Write your name if the statement is true and your surname if the statement is false.

__________40. Read and analyze the use of preventive Maintenance Schedule form.
__________41. Determine the types of tools and machine needed to be lubricated.
__________42. Fill out a requisition slip form in releasing the lubricants needed.
__________43. Secure a borrower’s slip from your teacher.
__________44. Fill out the slip form correctly intended for the needed tools.
__________45. Perform the task according to the prescribed schedule and the assigned machine.
__________46. Perform lubricating procedure.
__________47. Determine the parts of the machine needed to be lubricated.
__________48. Apply thin coat of oil on the parts for a long period of time.
__________ 49.Open the bearing cover and apply grease.
__________50. Apply grease on sealed bearing with the use of a grease gun.

IV. Enumeration.
51-55. The 5 S
56-60. The Different Signs

V. Application. Draw the opposite of the given figure. (50pts each)