Scribd
Upload
34 views3 pages

List of The Technical Question

This document contains a technical question list with 16 multiple choice questions. The questions cover topics such as types of threads, the purpose of a "Whole Wizard" in Solidworks, uses of "Convert Entities", definitions of factor of safety, Young's modulus, units of force, properties required for spring materials, parts of screw threads, uses of shaft couplings, types of machine parts, advantages of wire ropes over cotton ropes, common groove angles for rope drives, what types of metals continuous chips are formed in, causes of crater wear, operations that require chamfering, and examples of cutting types. The document was prepared by an applied engineer and approved by the head of the Computer Aided Design department.

Uploaded by

Mitul patel
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
Download as docx, pdf, or txt
34 views3 pages

List of The Technical Question

This document contains a technical question list with 16 multiple choice questions. The questions cover topics such as types of threads, the purpose of a "Whole Wizard" in Solidworks, uses of "Convert Entities", definitions of factor of safety, Young's modulus, units of force, properties required for spring materials, parts of screw threads, uses of shaft couplings, types of machine parts, advantages of wire ropes over cotton ropes, common groove angles for rope drives, what types of metals continuous chips are formed in, causes of crater wear, operations that require chamfering, and examples of cutting types. The document was prepared by an applied engineer and approved by the head of the Computer Aided Design department.

Uploaded by

Mitul patel
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1/ 3

(This format is to be used for technical question)

Date : 28/03/2020
TECHNICAL QUESTION
Page : 01 of 02
SIED,Surat
List of the technical question.
1. A bench vise has which types of thread.
a. Acme b. Square
c. Buttress d. Vee

2. What do you understand by a “Whole Wizard” on Solid works?


 Used to save default setting
 Creating standard & customized holes within a part or assembly without using multiple
features
 Creating cut within a part or assembly
 Copy complete assembly with all associated parts, drawings and references

3. What is “Convert Entities” & where is used?


 Used in solid works to draw sketch with reference to any features of a part
 Used in Auto Cad and make one part with reference to another in an assembly
 To copy complete assembly with all associated parts, drawings and references
 Used in solid works to use feature with reference to any assembly

4. What if Factor Of Safety?


 FOS = Max. Stress/Working Stress
 FOS = Min. Stress/Working Stress
 FOS = Working Stress/Min. Stress
 FOS = Max Stress/Min. Stress

5. Young Modulus may be defined as the ratio of-


a. Linear stress to Lateral strain b. Lateral strain to linear strain
c. Linear stress to linear strain d. Shear stress to shear strain

6. One kg force is equal to


a. 7.8 N b. 8.9 N
c. 9.8 N d. 12 N

7. Which of the following property is essential for spring material?


a. Stiffness b. Ductility
c. Resilience d. Plasticity

8. The smallest diameter of an external or internal screw thread is known as -


a. Minor diameter b. Major diameter
c. Pitch diameter d. None of these

9. Shaft coupling is used in machinery to -


a. Introduce mechanical flexibility b. Introduce protection against over loads
c. Reduce transmission of shock loads d. All of these

10. A machine part subjected to ___________ is called strut.


a. An axial tensile force b. An axial compressive force
c. A tangential force d. One of these

11. Wire ropes as compared to cotton ropes.


a. Are lighter in weight b. Offer silent operation
c. Can withstand shock loads d. All of these

12. Groove angle of the pulley fr rope drive is usually.


a. 20 degree b. 30 degree
c. 45 degree d. 60 degree

13. Continuous with built up edge are formed during machining of


a. Brittle metal b. Ductile metal
c. Hard metal d. Soft metal

14. Crater wear is mainly due to the phenomenon known as -


a. Adhesion of metals b. Oxidation of metals
c. Diffusion of metals d. All of these

15. Chamfering is an essential operation after.


a. Knurling b. Rough turning
c. Boring d. Thread cutting

16. Drilling is an example of -


a. Orthogonal cutting b. Oblique cutting
c. Simple cutting d. Uniform cutting

Additional Note:

Prepared By: Approved By:

Mr. M. D. Patel
Appl. Er. Mr. Mahek Mistry
Department of Mechanical Head, SIED
Engineering Department of Mechanical Engineering
(Computer Aided Design Department)

You might also like