See discussions, stats, and author profiles for this publication at: https://www.researchgate.

net/publication/230701092

Smart Parking System (SPS) Architecture Using Ultrasonic Detector

Article · July 2012

CITATIONS READS
98 7,556

4 authors, including:

Norlia Mustaffa
Universiti Sains Malaysia
31 PUBLICATIONS   194 CITATIONS   

SEE PROFILE

Some of the authors of this publication are also working on these related projects:

Universiti Sains Malaysia View project

(M) UNESCO Bangkok View project

All content following this page was uploaded by Norlia Mustaffa on 03 June 2016.

The user has requested enhancement of the downloaded file.

 International Journal of Software Engineering and Its Applications
Vol. 6, No. 3, July, 2012

Smart Parking System (SPS) Architecture Using Ultrasonic Detector

Amin Kianpisheh, Norlia Mustaffa, Pakapan Limtrairut and Pantea Keikhosrokiani

Universiti Sains Malaysia(USM), Malaysia
ak11_com040@student.usm.my, norlia@cs.usm.my,
pl11_com003@student.usm.my, pk11_com033@student.usm.my

Abstract
With the increase in vehicle production and world population, more and more parking
spaces and facilities are required. In this paper a new parking system called Smart Parking
System (SPS) is proposed to assist drivers to find vacant spaces in a car park in a shorter
time. The new system uses ultrasonic (ultrasound) sensors to detect either car park occupancy
or improper parking actions. Different detection technologies are reviewed and compared to
determine the best technology for developing SPS. Features of SPS include vacant parking
space detection, detection of improper parking, display of available parking spaces, and
directional indicators toward vacant parking spaces, payment facilities and different types of
parking spaces (vacant, occupied, reserved and handicapped) through the use of specific
LEDs. This paper also describes the use of an SPS system from the entrance into a parking
lot until the finding of a vacant parking space. The system is designed for a four-level parking
lot with 100 parking spaces and five aisles on each floor. The system architecture defines the
essential design features such as location of sensors, required number of sensors and LEDs
for each level, and indoor and outdoor display boards.

Keywords: SPS, Ultrasonic sensors, Car park, Improper parking Directional signage

1. Introduction
Time and cost are two important factors of human life, whether for an individual or a
business. As quality of life increases, more and more people are inhabiting cities. Urban life
requires centralized public facilities. Shopping complexes are an important point of interest
both for a city's inhabitants as well as for visitors. With the emergence of modern shopping
complexes which provide a variety of services, more and more people are attracted to visit
them. Hence, more shop owners prefer to locate their business in shopping complexes to
target more customers and increase revenue [1].
Recently, shopping complexes have begun providing services much more diverse than just
pure selling and buying. Customers can use banking services, post offices, food courts,
cinemas, children's play areas, and so on. The growth of shopping malls has influenced
shopping culture and behavior. For instance, in Malaysia window-shopping, or visiting
shopping complexes simply for looking rather than buying, is a common activity [2].
Providing sufficient parking for visitors is one of the main issues in developing shopping
complexes. Offering safe and secure parking lots with a sufficient number of spaces and
paying attention to handicapped drivers are a few of the factors which can increase customer
loyalty and attract customers to visit a shopping mall more frequently. Among the various
types of parking lots are multilevel parking, roadside, roadside with ticket and barrier gate
and roadside with parking meter; of these, the multilevel parking lot is the most preferred by
patrons [3]. Safety, weather conditions, proximity and car park fees respectively are the main
factors by which patrons choose a specific parking lot. Hence, multilevel parking lots are

51
International Journal of Software Engineering and Its Applications
Vol. 6, No. 3, July, 2012

preferred, and for this reason were selected as the parking lot type for this study. SPS detects
car park occupancy through ultrasonic sensors which are located above each parking space.
Vacant, occupied, handicapped or reserved spaces are indicated by different colors of LEDs.
"Improper parking" is the situation in which one car is parked straddling two vacant spaces
and occupies both. Detection of improper parking and providing directions to vacant spaces
and payment facilities are other services offered by SPS.
The objectives of this study are to highlight parking lots’ importance, indicate the difficulty
drivers have in parking their vehicles at shopping complexes, propose an applicable solution
to solve the aforementioned problems, and outline an SPS architecture design. This paper is
organized as follows: the introduction details the importance of shopping complexes and
parking lots. Part 2 discusses current parking lot problems and the difficulties that customers
encounter in parking lots. Section 3 explains detection technology and compares ultrasonic
sensors with other types of detectors. Section 4 gives a system overview and the features of
SPS. Section 5 outlines SPS architecture and the devices required to implement it. Finally,
the last section offers conclusions and discusses current research.

2. Statement of Parking Lot Problems

2.1. Difficulty in Finding Vacant Spaces
Quickly finding a vacant space in a multilevel parking lot is difficult if not impossible,
especially on weekends or public holidays. One study showed that 86% of drivers face
difficulty in finding a parking space in multilevel parking lots [3]. Finding spaces during
weekends or public holidays can take more than 10 minutes for about 66% of visitors.
Stadiums or shopping malls are crowded at peak periods, and difficulty in finding vacant slots
at these places is a major problem for customers [4]. Insufficient car park spaces \ lead to
traffic congestion and driver frustration [5].

2.2. Improper Parking

If a car is parked in such a way that it occupies two parking slots rather than one, this is
called improper parking. Improper parking can happen when a driver is not careful about
another driver’s rights. Sometimes improper parking occurs when a driver parks on or a bit
outside of the lines of a parking space. The driver may notice his improper parking after
leaving his car, but may not be willing to unlock his car, restart it, and adjust it to be inside
the lines. This matter annoys other drivers and most of the time a driver who wants to park in
a small leftover slot will give up and feel frustrated. Figure1 presents an improper parking
situation.

Figure 1. Improper Parking

52
 International Journal of Software Engineering and Its Applications
Vol. 6, No. 3, July, 2012

2.3. Parking Fee Payment

Parking fee payment can be a time consuming activity for people. Since many current
payment machines just accept small notes and coins, finding the exact amount and queuing
for payment is not pleasant for drivers. Therefore, providing services that make payment
convenient is desirable. One survey showed that queuing up for payment and finding coins
for parking fee payment is troublesome. Moreover, most respondents agreed that using
Touch'n'Go (a system that allows simply swiping a card and deduct fees from inside credit) is
useful and will decrease queue up time[3].

3. Detection Technology Review

The choice of appropriate detection technology depends on the objective and scope of the
project [6]. Two types of detection technology, vision-based and sensor-based, are discussed
in this study. Vision-based methods use closed-circuit television (CCTV) — usually one
camera is responsible for more than one parking space — and image processing software to
detect parking space status. Sensor-based methods use one sensor for each individual parking
space.

3.1. Vision-Based Method

Monitoring parking lot vacancy is a significant technology which can be used for guiding
cars to vacant spaces and for efficient use of parking spaces. Monitoring detection technology
can be divided into two categories. The first estimates the number of remaining vacant spaces
for the entire parking lot by counting incoming and outgoing vehicles. The second monitors
the status of each individual space and can be used to guide a car to a vacant space. To help
drivers find a vacant parking space without much effort, intelligent parking systems should
provide the specific location of vacant spaces and not just the total number of spaces [7]. To
detect the status of an individual parking space different methods have been utilized, such as
ultrasonic sensors placed at each space (thus it requires many sensors), or surveillance
cameras placed at a high position (allowing supervision of a wide area by a few cameras,
which is more useful in outdoor parking lot) [6].
Detection methods based on cameras and image processing suffer from a lack of accuracy
and can be affected by environmental or weather circumstances. Major problems of vision-
based parking detection systems include shadow effects, occlusion effects, vacillation of
lighting conditions and perspective distortion. Light-colored cars in strong sunlight might
mislead detector software into detecting a full space as vacant; in the same way, a shadowed
area may be mistakenly identified as a dark-colored vehicle, leading an empty space to be
mistakenly seen as occupied. When the sun is blocked by a cloud, the change in lighting may
also affect detection performance [7]. Variable light intensity is one of the major challenges
in a camera-based detection system.

3.2. Sensor-Based Method

Another detection technology uses sensors to detect vacant spaces in a parking lot. With
the availability of various types of sensors, selecting a suitable detection system is an
important part of implementing a smart parking system. Different factors play a role in
choosing the proper sensor, including size, reliability, adaptation to environmental changes,
robustness and cost [8].

53
International Journal of Software Engineering and Its Applications
Vol. 6, No. 3, July, 2012

Sensors technologies are categorized as either intrusive or non-intrusive. Intrusive sensors

need to be installed directly on the pavement surface, so digging and tunneling under the road
surface are required. Magnetometers, pneumatic tubes, inductive loops, weight-in-motion
sensors and piezoelectric cables are considered intrusive sensors[9]. Non-intrusive sensors
only require fixing on the ceiling or on the ground. Ultrasonic sensors are categorized as non-
intrusive sensors, meaning that they require simpler installation compared to intrusive
sensors.
Ultrasonic sensors transmit sound waves between 25 kHz and 50 kHz. They use the
reflected energy to analyze and detect the status of a parking space. Ultrasonic waves are
emitted from the head of an ultrasonic vehicle detection sensor every 60 milliseconds, and the
presence or absence of vehicles is determined by time differences between the emitted and
received signals. Ultrasonic sensors can be used for counting vehicles and assessing the
occupancy status of each parking space [10]. Despite the low cost and easy installation of
ultrasonic sensors, they do have some disadvantages, particularly sensitivity to temperature
changes and extreme air turbulence. Figure 2 shows how ultrasonic sensors work.

Figure 2. How an Ultrasonic Sensor Works [11]

4. Smart Parking System Description

4.1. SPS User Overview
In order to find vacant spaces, drivers look at an LED display board which shows how
many and which type of vacant spaces are available at each level at that time. After
navigating to the desired parking level, drivers look at internal signs hanging from the ceiling
at the end of each aisle. Each internal sign shows two parts: the number of available spaces
and the direction (left, right or forward) of the aisle which has a vacant space. Each individual
parking space is equipped with LED lights which are located above the space and can show
green, red, blue or yellow. The color indicates the status of that space: green means the space
is vacant, red means the space is occupied, blue means the space is assigned for handicapped
drivers and yellow means it has been booked or is a VIP or reserved space for specific
reasons. When a driver enters a vacant space, the green light changes to red. Figure 3 shows
the four steps of utilizing a car park guidance system.

54
 International Journal of Software Engineering and Its Applications
Vol. 6, No. 3, July, 2012

Figure 3. Overview of SPS Car Park Guidance System

4.2. SPS Technical Overview

Our proposed SPS detection system is based on ultrasonic sensors. For each individual car
park, this would require one sensor fixed on the ceiling above each parking space. Ultrasonic
sensors work based on echo-location. The sensor transmits a sound, which hits a solid object
(car or ground) and is reflected back to the sensor. The time between the sent pulse and the
returned echo is used to calculate distance. In a vacant space, the time between transmitted
sound and reflection is longer than in an occupied space, hence the sensor can detect when a
space is occupied. Figure 4 illustrates how it works.

.
Figure 4. Ultrasonic Sensor Detection Area

LED lights can be attached to the detector sensor or mounted separately. SPS uses a
separate LED indicator to be more flexible and make it possible to fix both pieces at the best
position. The LED and the sensor connect to each other through a phone cable. When the
indicator displays green, it means the parking space is available; when the indicator displays
red, it means the space is occupied. In case of a handicapped parking space, a blue LED
indicates vacancy and red indicates occupancy. Reserved spaces are identified by a yellow
LED. Figure 5 shows two LED indicators, red and green.

55
International Journal of Software Engineering and Its Applications
Vol. 6, No. 3, July, 2012

Figure 5. LED Indicators

4.3. SPS Features

Smart Parking System (SPS) consists of main and secondary features for different purposes
and situations. Some of the features mentioned in this paper will be part of future research.
The main features of SPS are:
 Detect occupancy status of each individual space in a multilevel parking lot.
 Display the number of available spaces at entrance of parking lot, at entrance to each
level, and at end of each aisle.
 Display directional signage for each aisle, showing drivers which direction has vacant
spaces.
 Parking monitoring and management software to coordinate and operate the various
features.
 Display different colored LED lights to differentiate between spaces (reserved,
occupied, vacant or handicapped)
 Touch’n’Go module to facilitate payment of parking fees.
 Assign space beside each directional sign for advertising purposes.
 Line detection system to avoid improper parking.
Business logos are shown on the directional signage board, as shown in Figure 6.

Figure 6. Directional Board Advertisement

5. System Architecture
To develop the SPS architecture several pieces of equipment are required: ultrasonic
sensors, LED indicators, indoor display boards, outdoor display board(s), zone control unit
(ZCU), central control unit (CCU), network switch, telephone cable and management
software. The ultrasonic detector transmits its status message through a phone cable to the
zone control unit (ZCU), which collects and forwards the information to the central control
unit (CCU) through Cat5 cables. The CCU processes the data and sends commands to the
ZCU and LED panel. The ZCU is the middle layer of SPS and is responsible for controlling
the ultrasonic detectors. Each ZCU manages a group of 40 to 60 ultrasonic detectors, sending

56
 International Journal of Software Engineering and Its Applications
Vol. 6, No. 3, July, 2012

the relevant information to the CCU. The ZCU connects through an RS-485 port to the indoor
display board and ultrasonic sensors and communicates with the CCU through network
switch and LAN connections. The CCU is responsible for the collection of parking space
information and for processing data for the whole parking lot. The CCU transmits commands
to the LED display board to update the parking space information. Simultaneously, collected
data can be saved in the parking lot server’s database which will allow a supervisor to
monitor, manage and control parking lot information. Each CCU can support around 40 to 60
nodes, include ZCU(s) and outdoor display board(s). For a more efficient system, it is
recommended that a maximum of 40 nodes be connected to each ZCU and each CCU. Figure
7 shows a prototype of a complete SPS.

Figure 7. Prototype of SPS

In this paper, we assume a sample parking lot of four levels with 100 spaces on each floor.
Each floor has five aisles. Figure 8 shows the position of sensors, indoor display boards,
outdoor display boards, LED lights, ZCU and network switch at one level of the sample
parking lot.

Figure 8. Position of SPS Hardware at One Level of Parking Lot

The line detection system, or improper parking detection system, consists of two extra
sensors for each parking space, oriented horizontally along the lines demarcating the left and
right boundaries of the space. If any car is parked on the line the sensor triggers an alarm and
the driver should adjust his car within the lines until the beeping sound stops. Although some
parking lots are using ultrasonic sensors and LED indicators at present, improper parking
systems are not in place. Figure 9 presents how SPS’s line detection feature works.

57
 International Journal of Software Engineering and Its Applications
Vol. 6, No. 3, July, 2012

Figure 9. SPS Line Detection System Demo

6. Conclusion
The main contribution of this study is to introduce the most significant parking problem —
i.e., finding an empty space — and propose a solution. Ultrasonic sensors can be used both
for parking space detection and improper parking detection. The proposed architecture for a
parking detection system would decrease searching time for vacant spaces and reduce
instances of single cars improperly parking across two spaces. Future research might examine
car park booking procedures and optimization of sensor usage. Cost effectiveness and
marketing could be studied as well.

Acknowledgements
The authors would like to acknowledge the financial support of the Institute of Graduate
Study (IPS), Universiti Sains Malaysia (USM) for this research, under APEX Incentive Grant.
Special thanks to our supervisor Puan Norlia Mustaffa for all her support and assistance.

References
[1] M. Fishbein and I. Ajzen, “Belief, Attitude, Intention and Behaviour: An Introduction to Theory and
Research”, (1975).
[2] P. W. H. Coopers, “From Beijing to Budapest - Winning Brands. Winning Formats”, (2005), pp. 126.
[3] A. Kianpisheh, N. Mustaffa, J. M. Y. See and P. Keikhosrokiani, “User Behavioral Intention toward Using
Smart Parking System”, Proceeding of ICIEIS, (2011) Kuala Lumpur, Malaysia, pp. 732-747.
[4] D. B. L. Bong, K. C. Ting and K. C. Lai, “Integrated Approach in the Design of Car Park Occupancy
Information System (COINS)”, IAENG International Journal of Computer Science, IJCS, vol. 35, no. 1,
(2008).
[5] M. Y. I. Idris, E. M. Tamil, N. M. Noor and K. W. Fong, “Parking Guidance System Utilizing Wireless
Sensor Network and Ultrasonic Sensor”, Information Technology Journal, ISSN 1812-5638, (2009).
[6] K. Yamada and M. Mizuno, “A Vehicle Parking Detection Method Using Image Segmentation”, Electronics
and Communications in Japan, Part III: Fundamental Electronic Science (English translation of Denshi
Tsushin Gakkai Ronbunshi), vol. 84, (2001), pp. 25-34.
[7] C. C. Huang and S. J. Wang, “A Hierarchical Bayesian Generation Framework for Vacant Parking Space
Detection”, Circuits and Systems for Video Technology, IEEE Transactions, (2001), pp. 1.
[8] I. Masaki, “Machine-vision Systems for Intelligent Transportation Systems”, Intelligent Systems and their
Applications, IEEE, vol. 13, (1998), pp. 24-31.
[9] J. Scheeling, “Car Park Monitoring System”, University of Queensland, (2002).
[10] L. E. Y. Mimbela and L. A. Klein, “A Summary of Vehicle Detection and Surveillance Technologies used in
Intelligent Transportation Systems”, Southwest Technology Development Institute (SWTDI) at New Mexico
State University (NMSU),(2000).
[11] Parking Consultants International, Parking Guidance Systems [Online]. Sydney: Parking Consultants
International, (2009).

58

View publication stats