4.2.

2 Being Iron

Again: About 30 % of all the metals, including iron, do not want to be close packed. They feel that having 12 close
neighbors like the vulgar fcc and hcp metals is a bit too much; 8 should be good enough.
Why? You know as soon as you know the true name of those atoms. This is secret, of course, so all I can say is that
those atoms attract other atoms in all directions too, but somewhat more in 8 special directions
How can we take that into account when we start stacking balls once more?
It's easy: Just start with packing your oranges squarely on the bottom layer instead of hexagonally. What you get
then is what we call a "body centered cubic" crystal lattice, or bcc for short, as shown below. Why this type of
crystal lattice is called "body centered" is obvious if you look at the right-hand figure. You also see that the special
bonding directions are not in the plane where we do square packing but in the diagonals.

The body centered cubic (bcc) crystal

How we stack the atoms The resulting body-

when we make an iron centered cubic (bcc)
crystal. crystal lattice. The red
lines show the preferred
bonding directions.

We now covered attractions in all directions, giving close-packed element crystals and attractions in all directions but
with some preferences in special directions, giving (among others) the bcc structure from above. If, just for the hell of it,
we look at the other extreme of attraction only in some special directions, we get, for example, the diamond structure,
the favored structure of most semiconductors. Once more, there is no choice but to form a crystal when those atoms
get together.
Now we have three basic crystal lattice types, and if you find that confusing, consider that there are actually fourteen
fundamentally different lattice types or Bravais lattices.
You better believe me on this; I in turn believe Auguste Bravais who proved that in 1849. Figuring it out by yourself is
quite tedious and involves the hated "new math".
So far I have avoided to explain the subtle but essential difference between the
terms "lattice" and "crystal" but now we need to give this topic a quick look. The
science link gives in-depth information, this link will just illustrate and enlarge on Science
what is following here.
Link
A lattice is a mathematical concept, a repetitive sequence of points in space. A
crystal results when you put atoms on those lattice points. You always can put a
single atom at the lattice points of one of those 14 lattice types, than you get an Lattices,
element crystal. But nobody keeps you from putting more complex objects like Crystals
molecules there, however. Take water (H2O) molecules and you make an ice
crystal, for example.
Considering that you could put your water molecule on some lattice point with the oxygen up or with the hydrogen
up, and that there might be other ways as well, you now realize that there are altogether exactly 230 possibilities to
make different basic arrangements of entities like molecules on the lattice points of the 14 basic lattices.
Haha - just joking. I'm rather sure that you could not figure out that number. I certainly couldn't; at least not off-hand.
I can, however, look it up and check if the good people who are into this, got it right. They did. Just believe me. Use
this link to de-confuse you a bit if you think that's indicated.
If you look at little deeper, and I don't recommend it, even more possibilities emerge that you definitely don't want to
know about. It just serves to show how tremendous complexity—a DNA crystal, a sword blade, a car body—can
emerge from a few very simple principle.

Iron, Steel and Swords script - Page 1

 Mineralogists know all about Bravais lattices and so on, and they like to talk about it. So you should avoid them at
parties if you're not into symmetries, point groups, space groups, sets, intersection of sets, and more stuff from the
"New Math" that you hated so much way back in high school.
And no, it's not almost all the same. If you look at the table below, where some metals and their lattice types are listed,
and compare this to the older list of metals where I differentiated between always ductile behavior, always rather brittle
behavior, or in-between behavior with a brittle-to-ductile transition, you realize that the more ductile metals are fcc, the
more brittle ones are hcp, and the bcc metals are in between.
Do you feel that we are getting closer to some answers? Well, we do, but we also come up with new big questions:

Why do metals crystallize in

different lattice types?

Why does this happen even for metals that are quite similar in all other aspects like nickel (Ni; fcc) and cobalt (Co;
hcp)? If you read on for quite a while, you are eventually going to find out.
Right now let's make a little list of the lattice types that the more prominent metals and elements like to crystallize into.
However, first I must give you a few hints about how to "read" figures like the ones coming up:
The figures show lattices or crystals. The little blue spheres in the figures may represent lattice points in space or
atoms. Since true mathematical points are infinitely small and atoms extremely small, the real things are simply not
visible and we need to represent them by some symbol - a circle for example. It is then up to you how you interpret
the symbol.
The lines are only there to guide the eye so it can see the spatial relation of the points that form the lattice. Sorry,
we can't do better. If I would draw real (tiny) points for the lattice and no lines, you just wouldn't see much; check
here.
A crystal results if you put atoms on lattice points! If you symbolize atoms by circles, the resulting crystal figures
looks just like the lattice figures but is showing something entirely different! More about how to "read" figures like
that in this link

Lattice: fcc Lattice: bcc Lattice: hex

Crystal: fcc, elementary, close- Crystal: bcc, elementary Crystal: hcp, elementary, close
packed packed.
12 next neighbors 8 next neighbors 12 next neighbors

Ag (silver) Fe (iron) Cd (cadmium)

Au (gold) Cr (chromium) Co (cobalt)
Al (aluminum) W (tungsten) Mg (magnesium)
Cu (copper) Ta (tantalum) Ti (titanium)
Si (silicon) Mn (manganese) Zn (Zinc)
Ge (germanium) Ti (titanium) Zr (zirconium)
Co (cobalt) Zr (zirconium) C (carbon)
Fe (iron) Sr (strontium)
Mn (manganese)
Sr (strontium)
C (carbon)

Lattice types / crystal structure of common metals

and some other common elements

Blue circles = atoms and lattice points. Pink circles = atoms only (two atome per lattice point). Note that a
hexagonal close-packed (hcp) crystal results only when you put the "pink" atoms in positions where there are no
lattice points. This is deceiving. You are actually putting an ensemble of 2 atoms onto 1 lattice point. Details can
be found here.

Iron, Steel and Swords script - Page 2

Surprise! Some metals (and many elements not listed) come in more than one crystal type— in the table they are
identified by color. The big word for that is "allotropy" (of course from the old Greek, meaning changing, different kinds,
growing into something else). Those crystals then are "allotropic".
How come?
Before I answer this question, I first need to point out that it is primarily the temperature that determines what
crystal type you will find. The pressure is also important. Carbon provides for a good example of this: a diamond
forms from graphite at high pressure (and temperature).
Pure iron switches from a bcc structure to an fcc structure at 912 oC (1674 oF) and back again to bcc at 1394 oC
(2541 oF), while Cu or Au stick to their fcc structure at all temperatures.
Cobalt (Co), manganese (Mn), titanium (Ti), and so forth also undergo some kind of phase change (also called
phase transition) from one lattice kind to another one, if you change the temperature.
Of course, you now need to vent a big question: "How do you know all that! After
all, you can't possibly look at the atomic structure of some metal at very high
temperatures with an electron microscope. Not to mention that all of this was
Science
known long before electron microscopes even existed". Link
True. You are absolutely right. Even today we do not investigate the basic
crystalline structure of materials with an electron microscope. We use interference X-ray
effects of X- rays.
If you have seen a CD or DVD producing a spectrum of colors whenever you shine
diffraction
some bright light on, you have seen so-called interference effects.
The regular array of tiny grooves on the disc interferes with the light to produce rainbow colors. Come to think of it,
water droplets interfere with light to cause a rainbow. There - you have seen interference effects!
The regular array of atoms in a crystal does exactly the same thing with X-rays that the regular array of tiny grooves
on a DVD does with light. Shine an X-ray beam onto a crystal and it will produce phenomena akin to what produces
all kinds of "rainbows" with visible light. Recording that with proper detectors and throwing a lot of math at the data
allows to compute the structure of a crystal in minute details.
This is called X-ray diffraction. X-ray diffraction machines are a kind of mathematical microscope. They do not
produce some direct picture of the crystal, just abstract data - numbers - about the crystal. The science module will
give details.
But back to the phase changes that we just learned about. The phase change of carbon from diamond to graphite,
come to think of it, is simply a change from carbon atoms arranged in a fcc (diamond) lattice to carbon atoms arranged
in an hex (graphite) lattice. The illustration link shows details.
Nobody doubts anymore that diamonds and
graphite are just two different phases of carbon
Illustr. and not different elements / compounds / atoms Misc.
Link or whatever! Link
Our forebears, however, had a hard time to figure
Carbon out that a diamond is just graphite in disguise. History
Can you imagine a claim harder to believe? Will
phases carbon
your wife believe it? That her diamonds are soot in
drag?
It was not before 1772 that Antoine Lavoisier showed that the only product of the combustion (= burning) of diamonds
was carbon dioxide (CO2), proving that diamonds consist of carbon and nothing else. The story of figuring that out is
interesting enough to rate it's own module.
Of course, nobody believed this kind of nonsense right away. Since Lavoisier committed other grave errors of
judgement, like intervening on behalf of a number of foreign-born scientists including the (now extremely famous)
mathematician Joseph Louis Lagrange, he was tried, convicted, and guillotined on 8 May 1794 in Paris at the age
of 50.
Appeals to spare his life, so that he could continue his important experiments, was cut short by the judge: "La
République n'a pas besoin de savants ni de chimistes; le cours de la justice ne peut être suspendu." ("The Republic
needs neither scientists nor chemists; the course of justice cannot be delayed") is the infamous quote that goes
with it. There are reasons why scientists are not all that fond of lawyers.
To be sure, in our enlightened age something like that can't happen, our modern lawyers will see to that. All those
scientists (and artists, almost same thing) who in many countries are spending time in jail right now are there for
good reasons, we must assume.
Change the lattice type and you change diamond to graphite. We have exactly the same thing for fcc and bcc iron! The
bcc room temperature phase (named ferrite, by the way) is quite different from the high temperature fcc phase (named
austenite), as far as properties are concerned. You are not aware of that because fcc iron only exists at high
temperatures and then everything looks the same (glowing yellow-red) anyway. But properties are very different. Ask a
smith.
But you don't have to ask, you know that. You have witnessed the dire consequences of that phase transition taking
place. When the steel in the World Trade Centers became so hot that the transition from tough bcc-phase steel to
weak fcc-phase steel took place, disaster was unavoidable.
Iron, Steel and Swords script - Page 3
On the other hand, the bcc-fcc phase transition is one of the several reasons why iron is such a wonderful material.
When the sword smith heats up his iron or steel, he makes good use of the phase transition bcc-fcc in iron, as we will
see
We have come to a point where I can't weasel around the really big "why" question anymore.

Why do things happen the way they happen?

What is the guiding principle? I only consider "things to happen" in the inanimate world, of course, since you
already know some of the guiding principles in the animated world. For example, when your wife asks if she should
wear costume A or B to some function, the guiding principle for the ensuing discussion is: You can't win! Never.
Ever.

Iron, Steel and Swords script - Page 4