Scribd
Upload
74 views1 page

Low Alloy Steel Welding Wire Guide

This document provides information on Automig 80S-B6 and Tigfil 80S-B6 welding wires, which are copper coated low alloy wires for welding creep resistant steels up to 650°C. The wires have a uniform copper coating and are air hardenable. They are recommended for welding applications involving 5 Cr-0.5 Mo steels in power generation and chemical plants. The document provides specifications for the chemical composition and mechanical properties of the wires and welds.

Uploaded by

satnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
74 views1 page

Low Alloy Steel Welding Wire Guide

This document provides information on Automig 80S-B6 and Tigfil 80S-B6 welding wires, which are copper coated low alloy wires for welding creep resistant steels up to 650°C. The wires have a uniform copper coating and are air hardenable. They are recommended for welding applications involving 5 Cr-0.5 Mo steels in power generation and chemical plants. The document provides specifications for the chemical composition and mechanical properties of the wires and welds.

Uploaded by

satnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

AUTOMIG 80S-B6 / GMAW/GTAW

LOW ALLOY STEEL


TIGFIL 80S-B6 (High Temperature)

5Cr-0.5Mo COPPER COATED LOW ALLOY WIRE FOR CREEP RESISTANCE

CLASSIFICATION : EN ISO 21952-A AWS A/SFA 5.28 APPROVALS :


Automig 80S-B6: G CrMo5Si ER80S-B6 -
Tigfil 80S-B6: W CrMo5Si ER80S-B6 -

KEY FEATURES :
• Copper coated low alloy steel solid filler wire & rod • Typical 5 Cr-0.5 Mo weld deposit
• Uniform copper coating • Air hardenable alloy resistant to creep at
• Recommended pre-heat and interpass temperature elevated temperature up to 650°C
350-450°C • Radiographic quality weld
GMAW: DCEP
WELDING POSITION :
GTAW: DCEN
Shielding Gas Gas Flow Rate, LPM Stickout, mm
GMAW: Ar/1-5O2 15-22 10-20
GTAW: Ar 10-15 -

TYPICAL APPLICATIONS :
• Welding of 5 Cr-0.5 Mo creep resistant steels and • Joining P5/T5 materials of similar composition
equivalent grades • Joining P5B materials e.g. SA 336/336M Gr.F5,
• Application in power generation, ammonia SA 387/387M Gr.5
synthesis plants and petrochemical industries

STORAGE / HANDLING :

Keep dry and follow handling instructions mentioned on the box


CHEMICAL COMPOSITION OF BARE SOLID WIRE, Wt% :
C Mn Si Cr Mo Ni Cu* S P
Specification 0.10 max 0.40-0.70 0.50 max 4.50-6.0 0.45-0.65 0.60 max 0.35 max 0.025 max 0.025 max
* Including Cu in the coating

MECHANICAL PROPERTIES OF ALL WELD METAL :


UTS, MPa YS at 0.2% offset, MPa EL%
Condition

Specification PWHT: 745°C for 1 hr 560 min 470 min 17 min


Mechanical properties will vary with the type of shielding gas used.

PACKING DATA :
Ø, mm Kg/Spool
Automig 80S-B6 1.2 15
1.6 15
Ø x L, mm Primary Box, Kg No. of Primary Boxes Net Wt. of Carton, Kg
1.6 x 1000 5 4 20
Tigfil 80S-B6
2.0 x 1000 5 4 20
2.5 x 1000 5 4 20

EQUIVALENT :
SMAW Electrode: Cromoten D

PASSION FOR WELDING SINCE 1951 [Link]

17

You might also like