Tech Data

COMPRO™
COMPRESSOR FLUID
Introduction FLUID THICKENING WITH OXIDATION
IP 48/97 (modified) Oxidation Test 200°C (392°F)
1,6
Petro-Canada’s COMPRO™ Compressor Fluid 1,4

is a premium quality lubricant specifically

1,2
1,0
designed to provide long and highly reliable 0,8
What is the HT

service life in industrial air compressor 0,6

difference?
0,4
applications. 0,2
TM
Petro-Canada
COMPRO’s unique chemistry starts with a blend 0 Lubricants starts
of 99.9% pure base oils, produced using the HT with the HT purity
Purity Process. These crystal clear fluids are free COMPRO compressor fluid provides stronger resistance to process to produce
of impurities that can hinder lubricant water-white, 99.9%
oxidative breakdown than leading mineral oil based fluids.

performance. Utilizing more than 30 years of pure base oils. The

Stronger oxidation resistance keeps components free of

formulating experience, Petro-Canada fortifies

sludge and varnish for trouble free operation and lower
result is a range of
maintenance costs due to fewer fluid change-outs.

these thermally stable fluids with specially FLUID THICKENING WITH OXIDATION
lubricants, specialty
selected additives to provide strong protection
IP 48/97 (modified) Oxidation Test 200°C (392°F)
fluids and greases
against oxidative breakdown, wear and that deliver maximum
corrosion.
performance for our
With stronger resistance to sludge and customers.
varnish formation versus leading mineral oils,
COMPRO provides worry-free operation and can
TM

reduce overall compressor maintenance costs.

Features and Benefits COMPRO’s stronger oxidation resistance also reduces oil
thickening, which can improve compressor efficiency and
• Resists oxidative breakdown better than lower energy consumption costs.

leading mineral oil based fluids • High thermal stability reduces carbon
deposit formation
• Strong resistance to oxidative breakdown
caused by exposure to • Improves compressor efficiency
air at high discharge temperatures • Extends maintenance intervals for valves
• Keeps compressor components free of and intercoolers
sludge and varnish to ensure trouble free • Excellent protection against wear
operation and lower maintenance costs • Prolongs the service life of working
on fluid change-out components
• Provides oil change intervals of up to • Can extend the time between compressor
2,000 hours service in rotary screw overhauls
compressors, and 500 hours service in
• Reduces overall maintenance costs
reciprocating compressor
• Protects against rust and corrosion
• Reduces oil thickening, which can
improve compressor efficiency and lower • Helps to extend component life, especially
energy consumption costs when running intermittent service in high
humidity conditions
• Low volatility reduces oil carry-over into the
air system
• Reduces fluid consumption cost

lubricants.petro-canada.com
Applications
COMPRO Compressor Fluid is designed to lubricate and cool all types of rotary screw, reciprocating, centrifugal and
lobe compressors. It is available in four ISO viscosity grades: 32, 68, 100 and 150 to cover most compressor
applications.
COMPRO Compressor Fluids are suitable for use in compressors that handle air, and inert gases such as nitrogen,
argon, hydrogen, neon, helium, carbon dioxide, carbon monoxide and blast furnace gas.
COMPRO Compressor Fluids are suitable for use in all makes of compressors, including:
ABAC Copper Industries GrimmerSchmidt MAHLE
Allis Chalmers Cooper-Penjax Ingersoll-Rand Mark
Atlas-Copco Davey Compressors Joy Manufacturing Quincy Compressors
Ceccato Dresser Industries Kaeser Compressors Schramm Inc.
Champion Pacific Elliot Company Kellogg-American Sullair Compressors
Chicago Pneumatic Tool Fuller Company Le Roi Sundstrand Corp.
Compair Canada Gardner-Denver M&D Pneumatics Worthington Compressors
Copper-Bressemer

COMPRO Compressor Fluids are also suitable for use in industrial vacuum pumps operating with a
vacuum of >0.005 mBar.
NOTE: COMPRO Compressor Fluids should not be used in systems compressing wet or sour hydrocarbon gases.
For these applications, Petro-Canada’s Compressor Oil RP, SPX Fluid or NGS Fluid is recommended.
NOTE: COMPRO Compressor Fluids must not be used in the compression of oxygen, or other chemically active
gases such as chlorine or hydrogen chloride.
NOTE: Do not use in breathing air apparatus or medical equipment

Compressor Fluid Grade Selection & Service Life

Compressor Type Recommended Fluid Service Life at Maximum
Viscosity Grades Air Discharge Temperature
Rotary Screw COMPRO 32 2,000 Hours 85OC (185OF)
Reciprocating COMPRO 68, 100, 150 500 Hours 150 C O
(302OF)
Centrifugal / Lobe COMPRO 32 16,000 Hours 50 C
O
(122OF)
Note: The above are general guidelines only. Consult your OEM service manual for specific make/model recommendations.

COMPRO Compressor Fluids are designed for air • Provides up to 2,000 hours (4X longer) service life
compressors running under moderate conditions. in reciprocating compressors operating at air
For severe service or special compressor applications, discharge temperatures of up to 150OC (302OF)
we recommend the following: • Available in an ISO 68 viscosity grade
COMPRO XL-S Compressor Fluid COMPRO™ Synthetic Compressor Fluid
• Specially formulated to extended fluid life in rotary • Specially formulated to extended fluid life in rotary
screw compressors screw compressors operating under extreme
• Provides up to 8,000 hours (4X longer) service life conditions, or where the risk of compressor
in rotary screw compressors operating at air downtime cannot be compromised
discharge temperatures of up to 85OC (185 OF) • Provides up to 8,000 hours (4X longer) service life
• Available in ISO 32, 46, 68, 100 and 150 in rotary screw compressors operating at air
viscosity grades discharge temperatures of up to 105OC (221 OF)
COMPRO XL-R Compressor Fluid • Available in an ISO 32/46 viscosity grade
• Specially formulated to extend fluid life and
reduce maintenance costs in reciprocating
compressors
Operational Considerations and synthetic compressor fluids, they should not be mixed
or contaminated with fluids containing polyalkylene glycols
The full benefits of a change to COMPRO Compressor or silicones. COMPRO Synthetic Compressor Fluid is
Fluid will only be realized by minimizing contamination compatible with polyalkylene glycols but should not be
with the previously used oil. Certain makes of mixed with mineral oils or silicones.
compressors do not permit complete draining, so if the
drained oil is heavily oxidized (shown by significant For complete instructions on cleaning varnished
increase in the oil’s total acid number and viscosity), compressors, or flushing and recharging your
recharging with COMPRO may not result in optimum compressor with COMPRO Compressor Fluid, consult
performance and fluid service life. with a Petro-Canada Technical Services Advisor.

While COMPRO, COMPRO XL-S and COMPRO XL-R

Compressor Fluids are fully compatible with most mineral

Typical Performance Data

TEST COMPRO COMPRESSOR FLUID

PROPERTY METHOD 32 68 100 150
Viscosity,
cSt @ 40OC (SUS @ 100OF) ASTM D445 36 (186) 68 (352) 101 (527) 150 (788)
cSt @ 100OC (SUS @ 210OF) ASTM D445 5.7 (45) 8.7 (55) 11.2 (65) 14.9 (79)
Viscosity Index ASTM D2270 96 99 97 99
Flash Point, COC, C ( F)O O
ASTM D92 215 (419) 238 (460) 260 (500) 273 (523)
Pour Point, OC (OF) ASTM D5950 -39 (-38) -30 (-22) -18 (0) -12 (10)
Total Acid Number (TAN), mL KOH/g ASTM D664 0.3 0.3 0.3 0.3
Water Separability:
mL at 54OC (129OF), minutes ASTM D1401 42-38-0 (10) 42-38-0 (15) – –
mL at 82OC (180OF), minutes – – 42-38-0 (15) 42-38-0 (15)
Corrosion Protection:
Copper Corrision, 3h @ 100OC ASTM D130 1b 1b 1b 1b
Rust A – Distilled Water ASTM D665 Pass Pass Pass Pass
Rust B – Synthetic Sea Water ASTM D665 Pass Pass Pass Pass
Residue & Ash:
Conradson Carbon Residue, % ASTM D189 <0.1 <0.1 <0.1 <0.1

The values quoted above are typical of normal production. They do not constitute a specification.
 To order product or to learn more about how Petro-Canada Lubricants
can help your business visit: lubricants.petro-canada.com
or contact us at: lubecsr@petrocanadalsp.com

IM-7840E (2013.11)
™ Owned or used under license