UTFT

Multi-Platform Universal TFT display library

Supported display modules

& TFT Controllers

http://www.RinkyDinkElectronics.com/ (C)2016 Rinky-Dink Electronics, Henning Karlsen

IMPORTANT:
Please note that any attempt to use this library with display modules that are not on
this list is done at your own risk. Using this library with display modules not on
this list may work just fine, but there is also a tiny, tiny risk that it may damage
your display module and/or development board. Consider yourself warned.

Do not ask me if a display module that is not on this list will work with the
library. As I have not tested it I simply do not know. You will just have to try for
yourself (at your own risk).

If your exact display module/shield is not on this list, or you have bought it from
another vendor than the one listed as the supplier, you will have to direct any
questions to your vendor. I cannot answer them.

There is also no point in sending me code that will make display modules/shields not
on this list work with the library. I only add support for new display modules and
shields at the request from vendors and manufacturers.

These display modules have been tested, and works with the UTFT library. Please note
that vendors/manufacturers may have changed the display modules since I got my test
module so there are no guarantees. It should also be noted that not all displays have
been tested on all development boards. Compatibility with development boards is tested
with a random selection of displays.
Other modules may work as long as they have one of the supported controllers (see the
section marked important above).

The displays marked as shields below have only been tested on platforms where they
plug directly in (i.e. on standard “Arduino” form factor development boards.)
Supplier: ITead Studio
Website: http://imall.iteadstudio.com/
Module Model for UTFT() Controller Notes Module Shield
ITDB02-1.8SP ITDB18SP ST7735 
ITDB02-2.2 ITDB22 HX8340-B(T) 
ITDB02-2.4E ITDB24E_8 S6D1121 8bit mode 
ITDB02-2.4E ITDB24E_16 S6D1121 16bit mode 
ITDB02-2.8 ITDB28 ILI9325D 8bit version only 
ITDB02-3.2S ITDB32S SSD1289 
ITDB02-3.2WD ITDB32WD HX8352-A 
ITDB02-4.3 ITDB43 SSD1963 
ITDB02-5.0 ITDB50 SSD1963 
ITDB02-2.2SP ITDB22SP HX8340-B(N) Retired 
ITDB02-2.4 ITDB24 ILI9325C Retired 
ITDB02-2.4D ITDB24D ILI9325D Retired 
ITDB02-2.4DWOT ITDB24DWOT ILI9325D Retired 
ITDB02-2.5H ITDB25H S1D19122 Retired 
ITDB02-3.2 ITDB32 HX8347-A Retired 
ITDB02-3.2WC ITDB32WC ILI9327 Retired 

Supplier: ElecFreaks
Website: http://www.elecfreaks.com/store/
Module Model for UTFT() Controller Notes Module Shield
TFT01-1.8SP TFT01_18SP ST7735S May require ext. power 
TFT1.8SP Shield TFT18SHLD ST7735 
TFT01-2.2 TFT01_22 S6D0164 
TFT01-2.2SP TFT01_22SP ILI9341 May require ext. power 
TFT2.2SP Shield TFT22SHLD ILI9341 
TFT01-2.4 v1.2 TFT01_24R2 S6D1121 
TFT01-2.4SP TFT01_24SP ILI9341 
TFT01-2.8 TFT01_28 ILI9325D 
TFT01-3.2 TFT01_32 SSD1289 
TFT01_3.2WD TFT01_32WD HX8352-A 
TFT01-4.3 TFT01_43 SSD1963 
TFT01-5.0 TFT01_50 SSD1963 
TFT01-7.0 TFT01_70 SSD1963 
TFT01-2.4 TFT01_24_8 ILI9325D 8bit model, Retired 
TFT01-2.4 TFT01_24_16 ILI9325D 16bit model, Retired 
TFT01_3.2W TFT01_32W ILI9327 Retired 

Supplier: NKC Electronics

Website: http://store.nkcelectronics.com/
Module Model for UTFT() Controller Notes Module Shield
RGB LCD 65K color module LPH9135 PCF8833 

Page 1
Supplier: Electronics Lee
Website: http://stores.ebay.com/electronics-lee
Module Model for UTFT() Controller Notes Module Shield
Uses 16bit latched mode2
3.2” TFT LCD Arduino
Shield - Revision A
ELEE32_REVA1 SSD1289 Not supported on chipKit 
or Arduino Due
3.2” TFT LCD Arduino 8bit mode3
Shield - Revision B
ELEE32_REVB SSD1289 Not supported on chipKit 
or Arduino Due

Supplier: Coldtears Electronics

Website: http://stores.ebay.com/coldtears-electronics-store
Module Model for UTFT() Controller Notes Module Shield
2.2" TFT LCD Module CTE22 S6D0164 Basic support only4 
2.8" TFT LCD Module CTE28 ILI9325D Basic support only4 
3.2" TFT LCD Module (R2) CTE32_R2 ILI9341 Basic support only4 
3.2" HR TFT LCD Module CTE32HR ILI9481 Basic support only4 
3.2" Wide TFT LCD Module CTE32W HX8352-A Basic support only4 
3.5” IPS TFT LCD Module CTE35IPS R61581 Basic support only4 
4.0” TFT LCD Module CTE40 ILI9486 Basic support only4 
5.0" TFT LCD Module CTE50 SSD1963 Basic support only4 
5.0" CPLD TFT LCD Module CTE50CPLD CPLD5 
7.0" TFT LCD Module CTE70 SSD1963 Basic support only4 
7.0" CPLD TFT LCD Module CTE70CPLD CPLD5 
3.2" TFT LCD Module CTE32 SSD1289 Retired 

Supplier: Watterott electronic

Website: http://www.watterott.com/
Module Model for UTFT() Controller Notes Module Shield
Only tested on
MI0283QT-9A MI0283QT9 ILI9341
Arduino Uno 

Supplier: ElecHouse
Website: http://www.elechouse.com/
Module Model for UTFT() Controller Notes Module Shield
5.0" TFT LCD Module EHOUSE50 SSD1963 
5.0" CPLD TFT LCD Module EHOUSE50CPLD CPLD5 
7.0" TFT LCD Module EHOUSE70 SSD1963 

Supplier: DisplayModule
Website: http://www.displaymodule.com/
Module Model for UTFT() Controller Notes Module Shield
DM-TFT18-101 DMTFT18101 HX8353C 
DM-TFT22-102 DMTFT22102 S6D0164 
DM-TFT24-104 DMTFT24104 ILI9325D 
DM-TFT28-103 DMTFT28103 ILI9325D 
DM-TFT28-105 DMTFT28105 ILI9341 Incompatible with chipKit 

1
Changed from INFINIT32
2
Use UTFT myGLCD(ELEE32_REVA,A1,A2,A0,A3,A5); to initialize
3
Use UTFT myGLCD(ELEE32_REVB,A1,A2,A0,99); to initialize
4
UTFT does not make use of the on-board Font and Icon Flash chip.
5
CPLD modules are currently not compatible with chipKit.

Page 2
If you are unsure which module you have you can try these model codes for the
supported controllers instead:

Supported mode
Controller Model for UTFT() 8bit 16bit Serial
CPLD CPLD 
HX8340-B(T) HX8340B_8 
HX8352-A HX8352A 
HX8353-C HX8353C 
ILI9325D ILI9325D_8 
ILI9325D_16 
ILI9325D_16ALT6 
ILI9341 ILI9341_S4P7 
ILI9341_S5P8 
ILI9341_16 
ILI9481 ILI9481 
ILI9486 ILI9486 
PCF8833 PCF8833 
R61581 R61581 
S6D0164 S6D0164 
S6D1121 S6D1121_8 
S6D1121_16 
SSD1289 SSD1289 
SSD1289_8 
SSD1289LATCHED9 LATCHED
SSD1963 SSD1963_480 
SSD1963_800 
SSD1963_800ALT10 
ST7735 ST7735 
ST7735_ALT11 
ST7735S ST7735S 

The following TFT controllers are used by display modules and shields that have been
retired. They are still supported but support may be removed in future versions of the
library. These controllers are disabled by default to save flash memory. To use them
you must enable support for them in “memorysaver.h”.

Supported mode
Controller Model for UTFT() 8bit 16bit Serial
HX8340-B(N) HX8340B_S 
HX8347-A HX8347A 
ILI9325C ILI9325C 
ILI9327 ILI9327 
S1D19122 S1D19122 

6
Alternative initialization for some 2.8” display modules
7
Use this for 4 Pin serial modules
8
Use this for 5 Pin serial modules
9
Currently only supported on 5v Arduino board, and not on chipKit or Arduino Due
10
Alternative initialization for 7” displays
11
Alternative initialization for the ElecFreaks TFT1.8SP Shield

Page 3