Scribd
Upload
431 views2 pages

Manufacturing Data Sheet: Low Voltage XLPE Cable Design Code: LVIS09AXSFY23.5C070SA002S Date: Rev No.

This document provides specifications for a low voltage XLPE cable with 3.5 mm^2 copper conductors. Key details include the manufacturer, voltage grade of 1100V, conductor and insulation materials, presence of an armour layer, and applicable standards. Electrical parameters like resistance and capacitance are also specified. The cable is rated for continuous current of 164A when buried and 175A in air.

Uploaded by

Jayagurunathan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
431 views2 pages

Manufacturing Data Sheet: Low Voltage XLPE Cable Design Code: LVIS09AXSFY23.5C070SA002S Date: Rev No.

This document provides specifications for a low voltage XLPE cable with 3.5 mm^2 copper conductors. Key details include the manufacturer, voltage grade of 1100V, conductor and insulation materials, presence of an armour layer, and applicable standards. Electrical parameters like resistance and capacitance are also specified. The cable is rated for continuous current of 164A when buried and 175A in air.

Uploaded by

Jayagurunathan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 2

Manufacturing Data Sheet: Low Voltage XLPE Cable

Design Code : LVIS09AXSFY23.5C070SA002S


Date : Rev No. :

S.No Particulars 3.5 X 70 MM²


1 Name of Manufacturer Polycab Wires Pvt. Ltd, Daman
2 Type of cable A2XFY
3 Voltage Grade V 1100
4 No of cores X size in sqmm 3.5 X 70
5 Conductor
H2/H4 Grade Aluminium as per Class 2 of IS:
a) Material
8130/84,latest
Max. d.c. resistance of conductor at 20° C
b) 0.443
(ohm/km) Main
Neutral 0.868
c) Shape of the conductor Stranded Compacted Sector
6 Insulation
a) Material XLPE as per IS 7098(Pt-1)/88, Latest
b) Nominal thickness (mm) Main 1.1
Neutral 0.9
c) Core Identification Red,Yellow, Blue & Black
7 Inner Sheath
a) Material Wrapping of Tapes
b) Minimum thickness (mm) 0.4
8 Armouring
a) Material Galvanised Steel
b) Type of armouring Flat Strip
c) Nominal size of armour (mm) 4.0 x 0.8
9 Outer Sheath
a) Material Extruded PVC Type 'ST2' as per IS:5831/84
b) Thickness (mm) 1.56 (Min.)
c) Colour of outer sheath. Black
10 Electrical Parameters
Max. a.c. resistance of conductor at 90° C
a) 0.568
(ohm/km)
b) Calculated Cable reactance (ohm/km) 0.0742
c) Impedance of cable (ohm/km) 0.573
d Approx. Cable Capacitance (mfd/km) 0.56
S.No Particulars 3.5 X 70 MM²

Maximum conductor temperature under


11 90°C
normal operating conditions
Maximum conductor temperature at the
12 250°C
termination of short circuit
Short Circuit rating of conductor for the
13 6.61
duration of 1 sec (kA)

14 Continuous Current carrying capacities :-


(a) In Ground at 30°C (A) 164
(b) In Air at 40°C (A) 175
IS 8130/84,IS 7098 Part I/88, IS 5831/84, IS
15 Applicable Standard
3975/88 etc. with latest up to date amendments

16 Nominal overall diameter of the cable in mm 31 ± 2.0

17 Minimum bending radius 12 times Overall diameter


18 Max. Tensile strength

(i) for Cables pulled with stocking (Newtons) 9 x D², D is the cable OD in mm

ii) for Cables pulled with pulling eyes (N) 7,350

19 Embossing POLYCAB ELECTRIC 1100 VOLTS GRADE XLPE


YEAR POLYCAB ELECTRIC 1100 VOLTS GRADE
XLPE , CABLE SIZE, CABLE TYPE WITH
20 Printing
SEQUENTIAL MARKING at every one meter
interval.
Note:-The values given above are subject to tolerances as per the relevant standards.

You might also like