Polyethylene: Section Guide

polyethylene
Polyethylene is now in widespread use for industrial

pipework systems, as well as for buried gas and water
pipelines, where it is the dominant material.
section guide
One of the major benefits is that Polyethylene is virtually
unbreakable due to impact at temperatures above 5˚C,
and remains very tough at temperatures as low as -40˚C. It Pipe -
mm Sizes 308
is also exceptionally resistant to abrasion, and will outlast Socket Fusion Fittings -
mm Sizes 310
steel or other hard materials in most slurry handling
applications. Socket Fusion Flanges -
mm Sizes 311
Electrofusion Fittings -
mm Sizes 312
Polyethylene is relatively low in weight, and its flexibility Compression Fittings -
mm Sizes 314
makes it suitable for temporary pipelines which are lain on Fusion Spigot Fittings -
mm Sizes 316
rough ground or where buried in unstable ground
conditions. Fusion Spigot Flanges -
mm Sizes 323
Ball Valve 325
It has very good chemical resistance, and will withstand Electrically Conductive Pipe and Fittings 326
most acids and caustic substances. It is insoluble in all FM Approved Pipe and Fittings 328
organic and inorganic solvents at 20˚C, but it will not resist
strong oxidising acids.
Polyethylene is joined by heat, and both socket fusion and

butt fusion welding equipment is available for sale or hire.
application guide
Wide range of sizes from 10mm to 1400mm
High impact resistance
Temperature range from -40˚C to +60˚C
Exceptionally resistant to abrasion
Non-toxic
Resistant to many acids, alkalis, organic and inorganic solvents
Flexible and therefore suitable for buried or surface pipelines
UV resistant
Not resistant to strong oxidising acids

Special welding equipment required
Above ground pipes require a lot of support
standards and approvals

Pipe : DIN 8074 - dimensions
: DIN 8075 - testing
Fittings : DIN 16963
IPS Flow Systems

Seaham Grange Industrial Estate, Seaham, Co Durham, SR7 0PT, England
Tel: +44+ 191 521 3111 Fax: +44+ 191 521 3222
E-mail: sales@ipsflowsystems.com Website: www.ipsflowsystems.com
about: polyethylene
Polyethylene (PE) is a thermoplastic from the polyolefin group of materials,
characterised by its low density when compared to other thermoplastics. A unique
combination of properties including mechanical strength, chemical resistance and
thermal stability all combine to make polyethylene a popular piping system material.
Polyethylene has excellent resistance against a variety of chemicals, however strong

oxidising acids attack the material. Good chemical resistance is achieved against
contact with solvents, such as alcohols, esters and ketones. Consequently, solvent
cement welding of PE pipes and fittings is not possible. PE has excellent diffusion
resistance, and because of this property, polyethylene has been successfully applied
for the safe transportation of gases for many years.
Black coloured PE is stabilised against the effects of UV radiation, and it may

therefore safely be used outdoors. The stabilisation also counteracts heat fatigue,
increasing the operating life.
There are a number of welding techniques suitable for pressure piping applications.
High quality, reliable joints can be achieved using socket fusion jointing, butt fusion
welding and electrofusion welding. In addition, PE systems can be joined using
flanges, threaded connections and mechanical couplings.
Polyethylene is no longer described by its density (LDPE, MDPE or HDPE), but by its resistance class according to ISO 9080 (PE 63,
PE 80 or PE 100). Polyethylene piping systems are available from IPS in metric dimensions according to DIN 8077/8078 and DIN
16962.
Characteristics
General properties of polyethylene
Chemical resistance
Polyethylene exhibits thermal stability up to 60°C (short-term 70°
for drainage systems). Polyethylene shows excellent impact The chemical resistance of polyethylene is considered
strength, with impact strength rising with increasing temperature. excellent, due to its non-polar nature. It is resistant to dilute
(aqueous) solutions of salts, acids and alkalis and to a large
Some important advantages of polyethylene are: number of organic solvents. Against concentrated
hydrochloric acid and hydrofluoric acid polyethylene is
- Low specific weight of 0.95g/cm3 resistant, however above certain concentration levels
- Favourable transportation methods (can be coiled) diffusion can occur which does not damage the material
- High long term creep resistance but causes secondary damage to surrounding steel
- Very good chemical resistance constructions. In this type of application, double
- Weathering resistance containment piping systems have been found ideally
- Radiation resistance suited.
- Outstanding weldability
- Excellent abrasion resistance Weathering resistance
- Smooth internal surfaces- low friction loss
Piping systems in black polyethylene are UV stabilised, and
- Resistant to freezing
therefore they do not need to be protected against
degradation. To help control the heating effects of UV
radiation, the pipe surface may be protected by the
Properties of Polyethylene (Average values) application of a UV absorbent coating such as AGRU Coat,
Property PE80 PE100 or by adding a layer of insulation.
Density 0.94 g/cm 3

0.95 g/cm3 Electrical characteristics
Tensile Strength 20 MPa 25 MPa Polyethylenee is non-conductive, therefore systems will
Elongation at Break >600% >600% remain free from electrolytic corrosion. Precautions should
be taken to avoid static discharge should any part of a PE
Notched Impact Strength at 23°C 12 kJ/ m2 16 kJ/ m2 piping system pass through an area where explosive gases
Notched Impact Strength at -30°C 4.5 kJ/ m2 6 kJ/ m2 may be present.
Modulus of Elasticity 950 MPa 1100 MPa

Radioactivity resistance
Coefficient of Linear Expansion 0.18 mm/m°C 0.18 mm/m°C
Polyethylene pipes and fittings are well established for
Maximum Operating Temperature 60°C 60°C drainage systems applications handling radioactive waste
Minimum Operating Temperature -40°C -40°C water from laboratories as well as for cooling water piping
systems for the nuclear power industry. PE remains
Crystalline Melting Temperature 128-131°C 127-130°C unaffected by regular exposure to a radiation dose of up to
Melt Flow Index 0.40-0.50g/10min 0.30-0.55g/10min 104 Gray.
Surface Resistance >1013 Ω >1013 Ω Physiological characteristics

Thermal Conductivity 0.43 W/m · K 0.40 W/m · K Polyethylene piping systems from IPS are physiologically
Flammability HB UL94 HB UL94 non-toxic (in accordance with ONORM B5014, Part 1, FDA,
BGA, and KTW guidelines) making them ideally suited as a
Colour Black Black piping material in contact with potable water.
304 IPS Flow Systems l Seaham Grange Industrial Estate l Seaham l SR7 0PT l England l Tel: 0191 521 3111 l www.ipsflowsystems.com
about: polyethylene
Pressure ratings for polyethylene systems
Maximum continuous pressure ratings
Pipes, fittings and valves are designed to operate continuously for 50 years at their maximum rated pressure at 20°C as follows,
unless otherwise stated.
The pressure ratings for Polyethylene pipes according to DIN 8074 and Polyethylene fittings according to DIN 16963 are defined by
the ‘nominal pressure’ method, whereby pipes, fittings and valves are grouped together according to a single nominal pressure
rating. The PN rating is the maximum permitted operational pressure in bars calculated at 20°C, for example PN6 indicates a
maximum working pressure of 6 bars. According to this method the pressure ratings of Polyethylene pipes and fittings according to
the nominal pressure system is as follows:-
PE80 Size Range Max. Operating Pressure PE100 Size Range Max. Operating Pressure
Pipe PN16 10mm to 400mm 16 Bar Pipe PN16 10mm to 630mm 16 Bar
PN10 16mm to 630mm 10 Bar PN10 40mm to 800mm 10 Bar
PN6 20mm to 800mm 6 Bar
PN4 40mm to 1200mm 4 Bar Fittings
PN3.2 50mm to 1400mm 3.2 Bar Socket Fusion PN16 20mm to 110mm 16 Bar*
PN2.5 63mm to 1400mm 2.5 Bar * Unions and threaded fittings PN10
Spigot Fusion PN16 20mm to 500mm 16 Bar
Threaded PN10 1/2” to 2” 10 Bar
Electrofusion PN16 20mm to 500mm 16 Bar
Standard Dimensional Ratio (SDR)

Standard Dimensional Ratio (SDR) is used to define thermoplastic pipes in a variety of materials including polypropylene,
polyethylene, and PVC-U. Taken from ISO 4065, SDR is described as being ‘the ratio of the nominal outside diameter of a pipe to its
nominal wall thickness’. To calculate the SDR according to ISO 4065 the following equation can be used:
SDR = d d SDR = d/e
e
where:
SDR = Value to be calculated
e = Thickness of the pipe wall (mm)
d = Pipe outside diameter (mm) e
Jointing Polyethylene Systems

PE pipe to pipe and pipe to fitting joints are easy to make, using socket fusion, butt fusion or electrofusion welds.
Socket Fusion Butt Fusion Electro-Fusion

Heating Heating Electro-fusion
Element Element Socket
Heating Heating
Socket Spigot Fitting
Pipe Fitting Pipe Pipe Pipe
Individual Parts Individual Parts Individual Parts
Heating Heating Heating
Finished Joint Finished Joint Finished Joint

Welding equipment is available for sale or hire - see Tools and Installation Equipment.
Detailed installation instructions, as well as free training, is available on request.
IPS Flow Systems l Seaham Grange Industrial Estate l Seaham l SR7 0PT l England l Tel: 0191 521 3111 l www.ipsflowsystems.com 305
PE80 Polyethylene pipe availability
Metric Sizes DIN 8074 PE80 PE80-el: Electro Conductive
Series Ventilation S-20 S-16 S-12.5 S-8.3 S-5 S-3.2 S-16 S-8.3 S-5
SDR - SDR41 SDR33 SDR26 SDR17.6 SDR11 SDR7.4 SDR33 SDR17.6 SDR11
Size Working Pressure - PN2.5 PN3.2 PN4 PN6 PN10 PN16 PN3.2 PN6 PN10
10 O.D. (mm) 10
Wall (mm) 1.8
Weight/m (kg) 0.05
12 O.D. (mm) 12
Wall (mm) 1.8
Weight/m (kg) 0.06
16 O.D. (mm) 16 16
Wall (mm) 1.8 2.2
Weight/m (kg) 0.08 0.10
20 O.D. (mm) 20 20 20
Wall (mm) 1.8 2.5 2.8
Weight/m (kg) 0.11 0.14 0.15
25 O.D. (mm) 25 25 25
Wall (mm) 1.8 2.7 3.5
Weight/m (kg) 1.14 0.19 0.24
32 O.D. (mm) 32 32 32 32
Wall (mm) 1.9 2.9 4.4 2.9
Weight/m (kg) 0.18 0.27 0.38 0.28
40 O.D. (mm) 40 40 40 40 40
Wall (mm) 1.8 2.3 3.7 5.5 3.7
Weight/m (kg) 0.23 0.28 0.43 0.60 0.45
50 O.D. (mm) 50 50 50 50 50 50
Wall (mm) 1.8 2.0 2.9 4.6 6.9 4.6
Weight/m (kg) 0.29 0.31 0.44 0.67 0.94 0.69
63 O.D. (mm) 63 63 63 63 63 63 63
Wall (mm) 1.8 2.0 2.5 3.6 5.8 8.6 5.8
Weight/m (kg) 0.36 0.40 0.49 0.69 1.05 1.47 1.10
75 O.D. (mm) 75 75 75 75 75 75 75
Wall (mm) 1.9 2.3 2.9 4.3 6.8 10.3 6.8
Weight/m (kg) 0.46 0.54 0.68 0.97 1.47 2.09 1.53
90 O.D. (mm) 90 90 90 90 90 90 90 90
Wall (mm) 2.2 2.8 3.5 5.1 8.2 12.3 5.1 8.2
Weight/m (kg) 0.63 0.79 0.98 1.38 2.11 2.99 1.44 2.20
110 O.D. (mm) 110 110 110 110 110 110 110 110 110
Wall (mm) 2.7 3.4 4.2 6.3 10.0 15.1 3.4 6.3 10.0
Weight/m (kg) 0.94 1.16 1.42 2.07 3.14 4.48 1.21 2.15 3.28
125 O.D. (mm) 125 125 125 125 125 125 125 125 125
Wall (mm) 3.1 3.9 4.8 7.1 11.4 17.1 3.9 7.1 11.4
Weight/m (kg) 1.22 1.51 1.84 2.65 4.06 5.76 1.58 2.77 4.23
140 O.D. (mm) 140 140 140 140 140 140
Wall (mm) 3.5 4.3 5.4 8.0 12.7 19.2
Weight/m (kg) 1.54 1.86 2.30 3.34 5.08 7.24
160 O.D. (mm) 160 160 160 160 160 160 160 160 160
Wall (mm) 4.0 4.9 6.2 9.1 14.6 21.9 4.9 9.1 14.6
Weight/m (kg) 2.00 2.42 3.02 4.33 6.67 9.44 2.53 4.51 6.95
180 O.D. (mm) 180 180 180 180 180 180 180 180 180
Wall (mm) 4.4 5.5 6.9 10.2 16.4 24.6 5.5 10.2 16.4
Weight/m (kg) 2.46 3.07 3.79 5.45 8.40 11.90 3.19 5.68 8.75
200 O.D. (mm) 200 200 200 200 200 200 200 200 200
Wall (mm) 4.9 6.2 7.7 11.4 18.2 27.4 6.2 11.4 18.2
Weight/m (kg) 3.05 3.81 4.69 6.76 10.40 14.70 3.97 7.04 10.80
225 O.D. (mm) 225 225 225 225 225 225 225 225 225
Wall (mm) 5.5 6.9 8.6 12.8 20.5 30.8 6.9 12.8 20.5
Weight/m (kg) 3.86 4.77 5.89 8.55 13.10 18.60 4.99 8.91 13.70
250 O.D. (mm) 250 250 250 250 250 250 250 250 250
Wall (mm) 6.2 7.7 9.6 14.2 22.7 34.2 7.7 14.2 22.7
Weight/m (kg) 4.79 5.92 7.30 10.50 16.20 23.00 6.17 11.00 16.80
280 O.D. (mm) 280 280 280 280 280 280
Wall (mm) 6.9 8.6 10.7 15.9 25.4 38.3
Weight/m (kg) 5.98 7.40 9.10 13.20 20.20 28.80
315 O.D. (mm) 315 315 315 315 315 315 315 315 315
Wall (mm) 7.7 9.7 12.1 17.9 28.6 43.1 9.7 17.9 28.6
Weight/m (kg) 7.51 9.37 11.50 16.70 25.60 36.50 9.76 17.40 26.70
355 O.D. (mm) 355 355 355 355 355 355
Wall (mm) 8.7 10.9 13.6 20.1 32.2 48.5
Weight/m (kg) 9.55 11.80 14.60 21.20 32.50 46.30
400 O.D. (mm) 400 400 400 400 400 400 400 400
Wall (mm) 8.0 9.8 12.3 15.3 22.7 36.3 54.7 12.3
Weight/m (kg) 9.93 12.10 15.00 18.50 26.90 41.20 58.80 15.60
450 O.D. (mm) 450 450 450 450 450 450
Wall (mm) 8.0 11.0 13.8 17.2 25.5 40.9
Weight/m (kg) 11.20 15.20 19.00 23.40 34.00 52.30
500 O.D. (mm) 500 500 500 500 500 500
Wall (mm) 8.0 12.3 15.3 19.1 28.3 45.4
Weight/m (kg) 12.50 18.90 23.30 28.90 41.80 64.50
560 O.D. (mm) 560 560 560 560 560 560
Wall (mm) 10.0 13.7 17.2 21.4 31.7 50.8
Weight/m (kg) 17.40 23.60 29.40 36.20 52.50 80.80
630 O.D. (mm) 630 630 630 630 630 630
Wall (mm) 10.0 15.4 19.3 24.1 35.7 57.2
Weight/m (kg) 19.60 29.80 37.00 44.80 66.50 102.00
710 O.D. (mm) 710 710 710 710 710
Wall (mm) 12.0 17.4 21.8 27.2 40.2
Weight/m (kg) 26.40 37.90 47.20 58.30 84.00
800 O.D. (mm) 800 800 800 800 800
Wall (mm) 12.0 19.6 24.5 30.6 45.3
Weight/m (kg) 29.80 48.10 59.70 73.90 107.00
900 O.D. (mm) 900 900 900 900
Wall (mm) 15.0 22.0 27.6 34.4
Weight/m (kg) 41.80 60.70 75.60 93.30
1000 O.D. (mm) 1000 1000 1000 1000
Wall (mm) 15.0 24.5 30.6 38.2
Weight/m (kg) 46.60 75.20 93.10 115.00
1200 O.D. (mm) 1200 1200 1200 1200
Wall (mm) 18.0 29.4 36.7 45.9
Weight/m (kg) 67.00 108.00 134.00 166.00
1400 O.D. (mm) 1400 1400 1400
Wall (mm) 20.0 34.3 42.9
Weight/m (kg) 86.80 147.00 183.00
PE100 Polyethylene pipe availability
Metric Sizes DIN 8074 PE100 PE100 FM Approved
Series S-12.5 S-8 S-5 S-5
SDR SDR26 SDR17 SDR11 SDR11
Size Working Pressure PN6 PN10 PN16 PN12
20 O.D. (mm) 20
Wall (mm) 2.0
Weight/m (kg) 0.12
25 O.D. (mm) 25
Wall (mm) 2.3
Weight/m (kg) 0.17
32 O.D. (mm) 32 32
Wall (mm) 2 2.9
Weight/m (kg) 0.20 0.28
40 O.D. (mm) 40 40
Wall (mm) 2.4 3.7
Weight/m (kg) 0.30 0.43
50 O.D. (mm) 50 50
Wall (mm) 3.0 4.6
Weight/m (kg) 0.46 0.67
63 O.D. (mm) 63 63 63
Wall (mm) 3.8 5.8 5.8
Weight/m (kg) 0.73 1.06 1.05
75 O.D. (mm) 75 75 75
Wall (mm) 4.5 6.8 6.8
Weight/m (kg) 1.03 1.48 1.47
90 O.D. (mm) 90 90 90 90
Wall (mm) 3.5 5.4 8.2 8.2
Weight/m (kg) 0.99 1.47 2.14 2.11
110 O.D. (mm) 110 110 110 110
Wall (mm) 4.2 6.6 10.0 10.0
Weight/m (kg) 1.45 2.19 3.18 3.14
125 O.D. (mm) 125 125 125 125
Wall (mm) 4.8 7.4 11.4 11.4
Weight/m (kg) 1.86 2.79 4.12 4.06
140 O.D. (mm) 140 140 140 140
Wall (mm) 5.4 8.3 12.7 12.7
Weight/m (kg) 2.35 3.50 5.13 5.08
160 O.D. (mm) 160 160 160 160
Wall (mm) 6.2 9.5 14.6 14.6
Weight/m (kg) 3.08 4.57 6.74 6.67
180 O.D. (mm) 180 180 180 180
Wall (mm) 6.9 10.7 16.4 16.4
Weight/m (kg) 3.83 5.77 8.51 8.40
200 O.D. (mm) 200 200 200 200
Wall (mm) 7.7 11.9 18.2 18.2
Weight/m (kg) 4.74 7.12 10.50 10.40
225 O.D. (mm) 225 225 225 225
Wall (mm) 8.6 13.4 20.5 20.5
Weight/m (kg) 5.96 9.03 13.30 13.10
250 O.D. (mm) 250 250 250 250
Wall (mm) 9.6 14.8 22.7 22.7
Weight/m (kg) 7.38 11.10 16.30 16.20
280 O.D. (mm) 280 280 280 280
Wall (mm) 10.7 16.6 25.4 25.4
Weight/m (kg) 9.20 13.90 20.50 20.20
315 O.D. (mm) 315 315 315 315
Wall (mm) 12.1 18.7 28.6 28.6
Weight/m (kg) 11.70 17.60 25.90 25.60
355 O.D. (mm) 355 355 355 355
Wall (mm) 13.6 21.1 32.2 32.2
Weight/m (kg) 14.80 22.40 32.90 32.50
400 O.D. (mm) 400 400 400 400
Wall (mm) 15.3 23.7 36.3 36.3
Weight/m (kg) 18.80 28.30 41.70 41.20
450 O.D. (mm) 450 450 450
Wall (mm) 17.2 26.7 40.9
Weight/m (kg) 23.70 35.80 52.80
500 O.D. (mm) 500 500 500
Wall (mm) 19.1 29.7 45.4
Weight/m (kg) 29.20 44.20 65.20
560 O.D. (mm) 560 560 560
Wall (mm) 21.4 33.2 50.8
Weight/m (kg) 36.60 55.40 81.70
630 O.D. (mm) 630 630 630
Wall (mm) 24.1 37.4 57.2
Weight/m (kg) 46.40 70.20 103.00
710 O.D. (mm) 710 710
Wall (mm) 27.2 42.1
Weight/m (kg) 58.30 89.00
800 O.D. (mm) 800 800
Wall (mm) 30.6 47.4
Weight/m (kg) 73.90 113.00
900 O.D. (mm) 900 900
Wall (mm) 34.4 53.3
Weight/m (kg) 93.40 143.00
1000 O.D. (mm) 1000 1000
Wall (mm) 38.2 59.3
Weight/m (kg) 115.00 176.00
Agru PE 100
Can be supplied with FM Approval for
applications within the fire protection industry.
Please refer to the seperate pages at the end
of the Polyethylene section
pipe PE80
PE80 Pipe
PN2.5/S-20/SDR41 PN3.2/S-16/SDR33
Size Code Price/m Code Price/m

16 - - - -
20 - - - -
25 - - - -
32 - - - -
40 - - - -
50 - - - -
63 - - - -
75 20 705 0075 41 2.55 20 705 0075 33 3.02
90 20 705 0090 41 3.51 20 705 0090 33 4.37
110 20 705 0110 41 5.27 20 705 0110 33 6.41
125 20 705 0125 41 6.83 20 705 0125 33 8.30
140 20 705 0140 41 8.61 20 705 0140 33 10.19
160 20 705 0160 41 11.18 20 705 0160 33 13.29
180 20 705 0180 41 13.76 20 705 0180 33 16.87
200 20 705 0200 41 17.06 20 705 0200 33 20.95
225 20 705 0225 41 21.59 20 705 0225 33 26.13
250 20 705 0250 41 26.79 20 705 0250 33 32.47
280 20 705 0280 41 33.43 20 705 0280 33 40.46
315 20 705 0315 41 42.00 20 705 0315 33 51.28
355 20 705 0355 41 53.41 20 705 0355 33 64.50
400 20 705 0400 41 67.67 20 705 0400 33 82.05
450 20 705 0450 41 92.14 20 705 0450 33 113.39
500 20 705 0500 41 114.57 20 705 0500 33 138.97
560 20 705 0560 41 143.05 20 705 0560 33 175.63
630 20 705 0630 41 180.63 20 705 0630 33 220.58
710 20 705 0710 41 229.72 20 705 0710 33 281.72
800 20 705 0800 41 291.55 20 705 0800 33 356.17
900 20 705 0900 41 428.62 20 705 0900 33 488.24
1000 20 705 1000 41 530.97 20 705 1000 33 601.35
1200 20 705 1200 41 813.20 20 705 1200 33 932.93
1400 20 705 1400 41 1175.76 20 705 1400 33 1364.27
Standard length 5m
Also available:- ventilation pipes - details on request.
Please note that a transportation surcharge may be applied on pipe diameters
250mm or larger - please enquire for details.
*Residual stocks only, please check availability
Non Standard Lengths
i Depending on the quantity and lead time

requirements, PE pipes can be produced in
lengths up to 12 metres.
Please enquire for details.
Electrically Conductive PE
i A range of PE80 pipes and fittings is designed

for the safe discharge of static electricity in
critical environments. Please refer to the
seperate pages at the end of the Polyethylene
section.
pipe PE100
PE100 Pipe
PN10/S-8.3/SDR17.6 PN16/S-5/SDR11
Size Code Price/m Code Price/m

20 25 705 0020 17 0.74 25 705 0020 11 0.95
25 25 705 0025 17 0.93 25 705 0025 11 1.31
32 25 705 0032 17 1.20 25 705 0032 11 1.83
40 25 705 0040 17 1.69 25 705 0040 11 2.53
50 25 705 0050 17 2.68 25 705 0050 11 3.86
63 25 705 0063 17 4.15 25 705 0063 11 6.06
75 25 705 0075 17 5.83 25 705 0075 11 8.43
90 25 705 0090 17 8.43 25 705 0090 11 12.14
110 25 705 0110 17 12.37 25 705 0110 11 18.13
125 25 705 0125 17 15.89 25 705 0125 11 23.33
140 25 705 0140 17 19.82 25 705 0140 11 29.23
160 25 705 0160 17 26.00 25 705 0160 11 38.21
180 25 705 0180 17 32.76 25 705 0180 11 48.20
200 25 705 0200 17 40.46 25 705 0200 11 59.72
225 25 705 0225 17 51.28 25 705 0225 11 75.17
250 25 705 0250 17 62.53 25 705 0250 11 92.87
280 25 705 0280 17 78.54 25 705 0280 11 115.77
315 25 705 0315 17 99.75 25 705 0315 11 146.83
355 25 705 0355 17 126.74 25 705 0355 11 186.86
400 25 705 0400 17 160.87 25 705 0400 11 236.75
450 25 705 0450 17 220.58 25 705 0450 11 325.97
500 25 705 0500 17 273.27 25 705 0500 11 401.84
560 25 705 0560 17 341.42 25 705 0560 11 503.71
630 25 705 0630 17 432.75 25 705 0630 11 635.76
710 25 705 0710 17 547.95 25 705 0710 11 816.40
800 25 705 0800 17 696.89 - -
Please note that a transportation surcharge may be applied on pipe
diameters 250mm or larger - please enquire for details.
Pipework Support Temperature De-Rating Factors

Polyethylene pipework requires more support than for metallic Pressure ratings for Polyethylene pipework systems are always
systems. As working temperature increases, the distance between quoted at 20˚C. As the working temperature increases, the
supports is reduced. maximum working pressure decreases by the factor indicated.
PN10 Support Centres/m
Pipe Working Pressure
Size 20OC 40OC 60OC Temperature (˚C) De-Rating Factor
16 0.5 0.5 0.4 20 1.00
20 0.6 0.5 0.4 30 0.77
25 0.7 0.6 0.5 40 0.53
32 0.8 0.7 0.6 50 0.36
40 0.9 0.8 0.7
50 1.0 0.9 0.8
63 1.2 1.1 0.9
75 1.4 1.2 1.0
90 1.5 1.4 1.2
110 1.7 1.5 1.3
125 1.8 1.6 1.4 Machine Hire
140 1.9 1.8 1.5
160 2.1 1.9 1.6 Don’t have the tools?
180 2.2 2.0 1.8 We have a dedicated fleet of
200 2.3 2.1 1.9 welding equipment available to
225 2.5 2.3 2.1 hire on a weekly basis.
250 2.6 2.4 2.1
280 2.8 2.6 2.2
315 2.9 2.7 2.4
355 3.1 2.9 2.6
400 3.3 3.1 2.7
socket fusion fittings
Tee 90˚ Union

FPM O-Rings
Size Code Price Size Code Price
20 25 056 0020 07 5.09 20 25 024 1120 07 14.46
25 25 056 0025 07 5.76 25 25 024 1125 07 15.78
32 25 056 0032 07 6.96 32 25 024 1132 07 18.95
40 25 056 0040 07 8.63 40 25 024 1140 07 26.66
50 25 056 0050 07 14.58 50 25 024 1150 07 37.79
63 25 056 0063 07 20.95 63 25 024 1163 07 51.30
75 25 056 0075 07 43.47
90 25 056 0090 07 69.33
110 25 056 0110 07 92.66
Reducer
Spigot x Socket
Reducing Tee 90˚
25/20 25 057 2520 07 4.04
32/20 25 057 3220 07 5.04
25/20 25 055 2520 07 6.76
32/25 25 057 3225 07 5.04
32/20 25 055 3220 07 8.28
40/20 25 057 4020 07 5.96
32/25 25 055 3225 07 8.28
40/25 25 057 4025 07 5.96
40/20 25 055 4020 07 9.48
40/32 25 057 4032 07 5.96
40/25 25 055 4025 07 9.48
50/20 25 057 5020 07 6.96
40/32 25 055 4032 07 9.48
50/25 25 057 5025 07 6.96
50/20 25 055 5020 07 15.26
50/32 25 057 5032 07 6.96
50/25 25 055 5025 07 15.26
50/40 25 057 5040 07 6.96
50/32 25 055 5032 07 15.26
63/25 25 057 6325 07 9.54
50/40 25 055 5040 07 15.26
63/32 25 057 6332 07 9.54
63/25 25 055 6325 07 22.26
63/40 25 057 6340 07 9.54
63/32 25 055 6332 07 22.26
63/50 25 057 6350 07 9.54
63/40 25 055 6340 07 22.26
75/63 25 057 7563 07 16.71
63/50 25 055 6350 07 22.26
90/63 25 057 9063 07 23.33
90/75 25 057 9075 07 23.33
Elbow 90˚ 110/63 25 057 1163 07 31.69
110/90 25 057 1190 07 31.69
20 25 051 0020 07 4.38

25 25 051 0025 07 5.30
32 25 051 0032 07 6.44 Female Adaptor
40 25 051 0040 07 8.15 BSP or NPT female threaded
50 25 051 0050 07 15.11 20 x /
1 2 25 034 2020 07 5.96
63 25 051 0063 07 19.62 25 x /
3 4 25 034 2525 07 6.76
75 25 051 0075 07 41.35 32 x 1 25 034 3232 07 8.82
90 25 051 0090 07 51.95 40 x 11/4 25 034 4040 07 10.14
110 25 051 0110 07 78.33 50 x 11/2 25 034 5050 07 15.91
63 x 2 25 034 6363 07 19.68
Code shown is for BSP
Elbow 45˚ Code for NPT on request
20 25 050 0020 07 5.30

25 25 050 0025 07 6.30 Male Adaptor
32 25 050 0032 07 7.09 BSP or NPT threaded
40 25 050 0040 07 9.16 20 x /
3 4 25 035 2025 07 6.10
50 25 050 0050 07 12.65 25 x 1 25 035 2532 07 7.09
63 25 050 0063 07 16.17 32 x 11/4 25 035 3240 07 8.48
75 25 050 0075 07 35.66 40 x 11/2 25 035 4050 07 13.92
90 25 050 0090 07 49.97 50 x 2 25 035 5063 07 17.64
110 25 050 0110 07 74.10
Code shown is for BSP
Code for NPT on request
Socket Cap
20 25 053 0020 07 3.26 20 25 054 0020 07 2.12
25 25 053 0025 07 3.38 25 25 054 0025 07 2.27
32 25 053 0032 07 4.45 32 25 054 0032 07 2.38
40 25 053 0040 07 5.76 40 25 054 0040 07 2.66
50 25 053 0050 07 8.82 50 25 054 0050 07 3.38
63 25 053 0063 07 12.00 63 25 054 0063 07 4.38
75 20 053 0075 07 16.96 75 25 054 0075 07 6.04
90 25 053 0090 07 23.99 90 25 054 0090 07 9.75
110 25 053 0110 07 42.82 110 25 054 0110 07 13.52
socket fusion fittings
Stub Flange Backing Ring Table D/E

Galvanised mild steel
Size Code Price 20 860-005-11E 5.39
20 25 052 0020 07 2.58 25 860-007-11E 6.10
25 25 052 0025 07 2.78 32 860-010-11E 6.41
32 25 052 0032 07 3.07 40 860-012-11E 6.60
40 25 052 0040 07 3.77 50 860-015-11E 8.10
50 25 052 0050 07 4.45 63 860-020-11E 11.49
63 25 052 0063 07 5.83 75 860-025-11E 17.17
75 25 052 0075 07 11.19 90 860-030-11E 17.45
90 25 052 0090 07 17.37 110 D 860-040-11D 22.56
110 25 052 0110 07 25.73 110 E 860-040-11E 22.56
Gasket Backing Ring NP10/16

EPDM
Galvanised mild steel
20 861-_-005 0.47 20 860-005-11NP 6.10
25 861-_-007 0.55 25 860-007-11NP 6.46
32 861-_-010 0.60 32 860-010-11NP 7.67
40 861-_-012 0.75 40 860-012-11NP 8.15
50 861-_-015 0.91 50 860-015-11NP 8.94
63 861-_-020 1.56 63 860-020-11NP 12.63
75 861-_-025 1.91 75 860-025-11NP 17.29
90 861-_-030 2.05 90 860-030-11NP 20.00
110 861-_-040 2.98 110 860-040-11NP 25.58
Complete code when ordering
Insert ‘I’ for NP10/16; ‘A’ for ANSI 150;
‘E’ for Table D/E
Gasket Backing Ring ANSI 150

FPM Galvanised mild steel
20 860-005-11A 6.10
20 862-_-005 2.21
25 860-007-11A 6.46
25 862-_-007 3.28
32 860-010-11A 7.67
32 862-_-010 4.33
40 860-012-11A 8.15
40 862-_-012 6.94
50 860-015-11A 8.94
50 862-_-015 7.59
63 860-020-11A 12.63
63 862-_-020 10.00
75 860-025-11A 17.69
75 862-_-025 14.47
90 860-030-11A 20.00
90 862-_-030 18.88
110 860-040-11A 25.58
110 862-_-040 33.21
Insert ‘I’ for NP10/16; ‘A’ for ANSI 150;
‘E’ for Table D/E
Backing Ring NP10
Polypropylene with steel core
Pressure Ratings 20 11 014 0020 11 6.41
i Maximum working pressures (socket fusion):-

20-110mm PN16
Except for:
Union - PN10
25
32
40
50
11
11
11
11
014
014
014
014
0025
0032
0040
0050
11
11
11
11
7.04
9.01
11.42
13.34
Female adaptor - PN10 63 11 014 0063 11 15.47
Male adaptor - PN10 75 11 014 0075 11 17.17
90 11 014 0090 11 20.28
110 11 014 0110 11 24.12
Backing Ring ANSI 150

Polypropylene with steel core
20 11 013 0020 11 6.41
25 11 013 0025 11 7.04
32 11 013 0032 11 9.01
40 11 013 0040 11 11.42
50 11 013 0050 11 13.34
63 11 013 0063 11 15.47
75 11 013 0075 11 17.17
90 11 013 0090 11 20.28
110 11 013 0110 11 24.12
electrofusion fittings
Electrofusion Coupling Electrofusion Elbow 45˚

PN16 - SDR11
20 25 173 0020 11 4.25 20 25 170 0020 11 11.47

25 25 173 0025 11 4.88 25 25 170 0025 11 11.47
32 25 173 0032 11 5.13 32 25 170 0032 11 12.12
40 25 173 0040 11 5.39 40 25 170 0040 11 14.47
50 25 173 0050 11 8.40 50 25 170 0050 11 18.40
63 25 173 0063 11 8.78 63 25 170 0063 11 20.79
75 25 173 0075 11 12.51 75 25 170 0075 11 29.80
90 25 173 0090 11 16.64 90 25 170 0090 11 39.30
110 25 173 0110 11 20.03 110 25 170 0110 11 57.65
125 25 173 0125 11 28.17 125 25 170 0125 11 79.81
140 25 173 0140 11 33.03 160 25 170 0160 11 156.48
160 25 173 0160 11 38.82 180 25 170 0180 11 213.45
180 25 173 0180 11 55.71 225 25 170 0225 11 339.86
200 25 173 0200 11 65.80
225 25 173 0225 11 84.77 Electrofusion Reducer
250 25 173 0250 11 124.90
280 25 173 0280 11 169.24
315 25 173 0315 11 203.57 25x20 25 177 2520 11 7.91
355 25 173 0355 11 372.21 32x20 25 177 3220 11 8.24
400 25 173 0400 11 466.73 32x25 25 177 3225 11 8.58
450 25 373 0450 11 928.53 40x20 25 177 4020 11 9.88
500 25 373 0500 11 1000.83 40x25 25 177 4025 11 9.88
PN10 - SDR17 40x32 25 177 4032 11 10.96
50x25 25 177 5025 11 13.71
450 25 373 0450 17 795.18
50x32 25 177 5032 11 13.71
500 25 373 0500 17 856.05
50x40 25 177 5040 11 14.98
560 25 373 0560 17 1139.02
63x32 25 177 6332 11 17.88
630 25 373 0630 17 1448.96
63x40 25 177 6340 11 17.88
710 25 373 0710 17 1698.19
63x50 25 177 6350 11 17.88
75x50 25 177 7550 11 23.55
75x63 25 177 7563 11 24.23
Electrofusion Tee 90˚ 90x63 25 177 9063 11 27.97
Fusion Spigot Branch 110x63 25 177 1163 11 45.60
20 25 176 0020 11 11.62 110x90 25 177 1190 11 45.60
25 25 176 0025 11 11.62 160x90 25 177 1690 11 79.55
32 25 176 0032 11 12.76 160x110 25 177 1611 11 81.55
40 25 176 0040 11 14.76 225x160 25 177 2216 11 185.09
50 25 176 0050 11 18.61
63 25 176 0063 11 20.83
75 25 176 0075 11 29.37 Electrofusion Cap
90 25 176 0090 11 37.13
110 25 176 0110 11 59.49
125 25 176 0125 11 74.90 20 25 174 0020 11 8.19
160 25 176 0160 11 138.75 25 25 174 0025 11 8.61
225 25 176 0225 11 378.37 32 25 174 0032 11 9.80
40 25 174 0040 11 10.78
50 25 174 0050 11 16.35
Electrofusion Elbow 90˚ 63 25 174 0063 11 18.06
75 25 174 0075 11 28.38
90 25 174 0090 11 40.37
20 25 171 0020 11 11.47 110 25 174 0110 11 51.79
25 25 171 0025 11 11.47 125 25 174 0125 11 63.65
32 25 171 0032 11 12.12 140 25 174 0140 11 87.41
40 25 171 0040 11 14.47 160 25 174 0160 11 89.42
50 25 171 0050 11 18.40 180 25 174 0180 11 117.41
63 25 171 0063 11 20.79 200 25 174 0200 11 138.76
75 25 171 0075 11 29.80 225 25 174 0225 11 171.29
90 25 171 0090 11 39.30 250 25 174 0250 11 263.22
110 25 171 0110 11 57.65 280 25 174 0280 11 364.09
125 25 171 0125 11 79.81 315 25 174 0315 11 503.81
160 25 171 0160 11 156.47
180 25 171 0180 11 213.45
225 25 171 0225 11 339.86
Pressure Ratings
i Polyethylene electrofusion fittings are suitable

for use handling fluids at pressures up to 16
bar at 20˚C.
electrofusion fittings
Electrofusion Adaptor Electrofusion Elbow 90˚

Electrofusion x Brass BSP Female Electrofusion x Brass BSP Female
20 x /
1 2 25 184 2020 11 34.27 20 x /
1 2 25 187 2020 11 44.60
25 x /
3 4 25 184 2525 11 37.55 25 x /
3 4 25 187 2525 11 46.77
32 x 1 25 184 3232 11 41.21 32 x 1 25 187 3232 11 50.94
40 x 11/4 25 184 4040 11 54.36 40 x 11/4 25 187 4040 11 67.38
50 x 11/2 25 184 5050 11 82.26 50 x 11/2 25 187 5050 11 96.09
63 x 2 25 184 6363 11 111.58 63 x 2 25 187 6363 11 128.45
Electrofusion Elbow 90˚

Electrofusion x Steel BSP Female
Electrofusion Adaptor
Electrofusion x Steel BSP Female 20 x /
1 2 25 187 2021 11 44.52
25 x /
3 4 25 187 2526 11 44.96
20 x /
1 2 25 184 2021 11 34.18 32 x 1 25 187 3233 11 46.98
25 x /
3 4 25 184 2526 11 34.87 40 x 11/4 25 187 4041 11 69.97
32 x 1 25 184 3233 11 37.22 50 x 11/2 25 187 5051 11 90.86
40 x 11/4 25 184 4041 11 56.97 63 x 2 25 187 6364 11 104.39
50 x 11/2 25 184 5051 11 77.08
63 x 2 25 184 6364 11 87.52 Electrofusion Elbow 90˚
Electrofusion x Brass BSP Male
20 x /
1 2 25 186 2020 11 45.07
25 x /
3 4 25 186 2525 11 47.49
Electrofusion Adaptor 32 x 1 25 186 3232 11 58.03
40 x 11/4 25 186 4040 11 72.14
20 x /
1 2 25 185 2020 11 34.73 50 x 11/2 25 186 5050 11 101.44
25 x /
3 4 25 185 2525 11 38.27 63 x 2 25 186 6363 11 111.74
32 x 1 25 185 3232 11 48.28 Electrofusion Elbow 90˚
40 x 11/4 25 185 4040 11 59.13 Electrofusion x Steel BSP Male
50 x 11/2 25 185 5050 11 87.66
63 x 2 25 185 6363 11 94.90 20 x /
1 2 25 186 2021 11 44.52
25 x /
3 4 25 186 2526 11 44.96
32 x 1 25 186 3233 11 46.98
40 x 11/4 25 186 4041 11 66.55
Electrofusion Adaptor 50 x 11/2 25 186 5051 11 90.86
Electrofusion x Steel BSP Male 63 x 2 25 186 6364 11 104.39
20 x /
1 2 25 185 2021 11 34.18 Electrofusion Elbow 45˚
25 x /
3 4 25 185 2526 11 34.87 Electrofusion x Brass BSP Female
32 x 1 25 185 3233 11 37.22
20 x /
1 2 25 189 2020 11 44.60
40 x 11/4 25 185 4041 11 56.97
25 x /
3 4 25 189 2525 11 46.77
50 x 11/2 25 185 5051 11 77.08
32 x 1 25 189 3232 11 50.94
63 x 2 25 185 6364 11 87.52
40 x 11/4 25 189 4040 11 67.38
50 x 11/2 25 189 5050 11 96.09
63 x 2 25 189 6363 11 128.45
Electrofusion Adaptor Electrofusion Elbow 45˚
Spigot x Brass BSP Female Electrofusion x Steel BSP Female
20 x /
1 2 25 180 0020 11 26.67 20 x /
1 2 25 189 2021 11 44.52
25 x /
3 4 25 180 0025 11 28.82 25 x /
3 4 25 189 2526 11 44.96
32 x 1 25 180 0032 11 31.87 32 x 1 25 189 3233 11 46.98
40 x 11/4 25 180 0040 11 44.72 40 x 11/4 25 189 4041 11 69.97
50 x 11/2 25 180 0050 11 67.26 50 x 11/2 25 189 5051 11 90.86
63 x 2 25 180 0063 11 95.91 63 x 2 25 189 6364 11 104.39
Electrofusion Elbow 45˚
Automatic Electrofusion
20 x /
1 2 25 188 2020 11 45.07
Welding Machine 25 x /
3 4 25 188 2525 11 47.49
• Barcode or manual entry 32 x 1 25 188 3232 11 58.03
• Welding is fully monitored throughout 40 x 11/4 25 188 4040 11 72.14
• Illuminated display 50 x 11/2 25 188 5050 11 101.44
• Fault messages displayed plus 63 x 2 25 188 6363 11 111.74
warning signal Electrofusion Elbow 45˚
• Memory records weld
Electrofusion x Steel Male BSP
information
• Data output to 20 x /
1 2 25 188 2021 11 44.52
PC or printer 25 x /
3 4 25 188 2526 11 44.96
• 110v or 230v 32 x 1 25 188 3233 11 46.98
supply 40 x 11/4 25 188 4041 11 66.55
Available for sale 50 x 11/2 25 188 5051 11 90.86
or hire 63 x 2 25 188 6364 11 104.39
compression fittings
Reducing Coupling Male Adaptor
20x16 7110162 5.58 16x3/8 7026163 2.02

25x16 7110165 6.12 16x1/2 7026165 2.02
25x20 7110202 6.12 16x3/4 7026167 2.02
32x20 7110203 10.36 20x1/2 7020205 2.85
32x25 7110253 10.36 20x3/4 7020207 3.05
40x25 97110254 17.55 20x1 7020201 4.25
40x32 97110324 17.55 25x1/2 7020255 3.42
50x25 97110255 20.56 25x3/4 7020257 3.42
50x32 97110325 23.50 25x1 7020251 5.29
50x40 97110405 23.50 32x3/4 7020327 5.29
63x25 97110256 25.10 32x1 7020321 5.29
63x32 97110326 29.75 32x1* 7021322 5.29
63x40 97110406 29.75 32x11/4 7020328 5.29
63x50 97110506 29.75 32x11/2 7020325 5.29
75x50 87110507 39.07 40x1 97020401 10.12
75x63 87110637 39.07 40x11/4 97020408 10.12
90x63 87110639 51.92 40x11/2 97020405 10.12
90x75 87110759 51.92 40x2 97020402 10.12
110x90 87110901 82.89 50x1 97020501 12.93
50x11/4 97020508 12.93
50x11/2 97020505 12.93
90º Reducing Tee 50x2 97020502 12.93
63x11/4 97020638 17.33
63x11/2 97020635 17.33
20x16x20 7340201 6.97 63x2 97020632 17.33
25x20x25 7340252 10.15 63x21/2 7020625 17.33
32x25x32 7340325 14.84 75x2 87020752 26.28
40x32x40 97340403 24.40 75x21/2 87020755 26.28
50x25x50 97340505 35.42 75x3 87020753 26.28
50x32x50 97340503 35.42 90x2 87020902 35.62
50x40x50 97340504 35.42 90x21/2 87020905 35.62
63x32x63 97340633 42.70 90x3 87020903 35.62
63x40x63 97340634 42.70 90x4 87020904 35.62
63x50x63 97340635 42.70 110x2 87020112 60.34
75x63x75 87340756 73.15 110x3 87020113 60.34
110x4 87020114 60.34
* NPT
Female Adaptor
16x1/2 7036165 2.44

16x3/4 7036167 2.44
20x1/2 7030205 3.42
20x3/4 7030207 3.42
20x1 7030201 3.42
25x3/4 7030257 3.74
25x1 7030251 3.74
32x3/4 7030327 5.03
32x1* 7031322 5.03
32x1 7030321 5.03
32x11/4 7030328 5.03
40x1 97030401 11.67
40x11/4 97030408 11.67
40x11/2 97030405 11.67
50x11/4 97030508 15.91
50x11/2 97030505 15.91
50x2 97030502 15.91
63x2 97030632 20.00
75x2 87030752 26.86
75x21/2 87030755 26.86
90x2 87030902 36.76
90x3 87030903 36.76
90x4 87030904 36.76
110x3 87030113 77.19
110x4 87030114 77.19
* NPT
compression fittings
End Plug 90º Tee

Threaded Female Offtake
20 7120020 3.76 16x1/2x16 7146165 3.96

25 7120025 4.82 20x1/2x20 7140205 4.90
32 7120032 7.01 20x3/4x20 7140207 4.90
40 97120040 10.91 25x1/2x25 7140255 8.10
50 97120050 14.56 25x3/4x25 7140257 8.10
63 97120063 24.40 25x1x25 7140251 8.10
75 7120075 31.64 25x11/4x25 7140258 8.10
90 7120090 42.98 32x3/4x32 7140327 10.64
110 7120110 51.18 32x1x32 7140321 10.64
32x11 / 4 x32 7140328 10.64
32x11/2x32 7140325 10.64
Coupling 40x1x40 97140401 17.25
40x11/4x40 97140408 18.65
16x16 7016016 2.44 40x11/2x40 97140405 18.65
20x20 7010020 3.05 40x2x40 97140402 18.65
25x25 7010025 3.27 50x11/2x50 97140505 22.50
32x32 7010032 7.66 50x2x50 97140502 22.50
40x40 97010040 16.25 63x11/4x63 97140638 31.58
50x50 97010050 16.92 63x11/2x63 97140635 31.58
63x63 97010063 24.73 63x2x63 97140632 31.58
75x75 87010075 48.45 75x2x75 87140752 59.36
90x90 87010090 84.46 75x21/2x75 87140755 59.36
110x110 87010110 181.85 75x3x75 87140753 59.36
125x125 7010125 42.00 90x3x90 87140903 70.85
110x4x110 87140114 129.01
90º Tee 90º Elbow

16x16x16 7040016 4.26
16x16 7056016 2.75
20x20x20 7040020 5.34
20x20 7050020 3.78
25x25x25 7040025 8.35
25x25 7050025 5.56
32x32x32 7040032 11.25
32x32 7050032 9.13
40x40x40 97040040 21.80
40x40 97050040 18.10
50x50x50 97040050 24.22
50x50 97050050 19.35
63x63x63 97040063 36.24
63x63 97050063 25.68
75x75x75 87040075 65.11
75x75 87050075 73.15
90x90x90 87040090 91.92
90x90 87050090 93.46
110x110x110 87040110 186.74
110x110 87050110 153.21
45º Elbow
90º Tee
Threaded Male Offtake
32x32 7460032 10.69
20x1/2x20 7840205 4.62 40x40 97460040 12.16
20x3/4x20 7840207 4.62 50x50 97460050 15.14
25x1/2x25 7840255 7.50 63x63 97460063 23.55
25x3/4x25 7840257 7.50 90x90 87460090 111.48
32x1x32 7840321 10.64 110x110 87460110 171.41
40x11/4x40 97840408 15.73
40x11/2x40 97840405 15.73
50x11/4x50 97840508 22.22 Compression Flange
50x11/2x50 97840505 22.22
63x11 / 4 x63 97840638 30.09 Adaptor
63x11/2x63 97840635 30.09 Metal Flange
63x2x63 97840632 30.09 50x40 7220505 32.48
50x50 7220502 32.48
63x50 7220632 50.19
75x65 87220755 58.57
90x80 87220903 68.94
90x100 87220904 68.94
110x100 87220114 86.19
125x125 7220125 132.16
125x150 7220126 132.16
fusion spigot fittings
Tee 90˚ PE100

PN6 PN10 PN16
Size Code Price Code Price Code Price
20 25 006 0020 11 2.02
25 25 006 0025 11 2.02
32 25 006 0032 11 2.54
40 25 006 0040 11 4.02
50 25 006 0050 11 5.44
63 25 006 0063 17 6.56 25 006 0063 11 8.46
75 25 006 0075 17 13.41 25 006 0075 11 17.03
90 25 006 0090 17 19.14 25 006 0090 11 25.43
110 25 006 0110 33 21.15 25 006 0110 17 31.77 25 006 0110 11 37.36
125 25 006 0125 33 25.86 25 006 0125 17 44.03 25 006 0125 11 51.44
140 25 006 0140 33 28.85 25 006 0140 17 51.99 25 006 0140 11 65.18
160 25 006 0160 33 48.16 25 006 0160 17 97.74 25 006 0160 11 109.65
180 25 006 0180 33 57.07 25 006 0180 17 120.06 25 006 0180 11 140.54
200 25 006 0200 33 70.47 25 006 0200 17 163.94 25 006 0200 11 201.40
225 25 006 0225 33 132.12 25 006 0225 17 192.48 25 006 0225 11 239.53
250 25 006 0250 33 204.30 25 006 0250 17 255.42 25 006 0250 11 304.74
280 25 006 0280 33 259.91 25 006 0280 17 288.69 25 006 0280 11 412.01
315 25 006 0315 33 328.14 25 006 0315 17 384.01 25 006 0315 11 585.28
355 25 006 0355 33 459.48 25 006 0355 17 577.40 25 006 0355 11 684.01
400 25 006 0400 33 673.63 25 006 0400 17 789.18 25 006 0400 11 1021.36
450 25 006 0450 33 909.48 25 006 0450 171097.47 25 006 0450 11 1349.34
500 25 006 0500 33 1180.69 25 006 0500 171412.34 25 006 0500 11 1724.56
Tee 90˚
Elongated 20 25 066 0020 11 3.69
25 25 066 0025 11 4.21
32 25 066 0032 11 5.05
40 25 066 0040 11 6.25
50 25 066 0050 11 8.27
63 25 066 0063 17 10.33 25 066 0063 11 11.39
75 25 066 0075 17 16.80 25 066 0075 11 18.91
90 25 066 0090 17 24.16 25 066 0090 11 26.90
110 25 066 0110 17 35.45 25 066 0110 11 39.38
125 25 066 0125 17 48.63 25 066 0125 11 54.05
140 25 066 0140 17 78.16 25 066 0140 11 86.88
160 25 066 0160 17 101.46 25 066 0160 11 112.74
180 25 066 0180 17 133.13 25 066 0180 11 147.91
200 25 066 0200 17 190.65 25 066 0200 11 211.95
225 25 066 0225 17 226.61 25 066 0225 11 251.87
250 25 066 0250 17 289.60 25 066 0250 11 325.19
280 25 066 0280 17 438.93 25 066 0280 11 487.64
315 25 066 0315 17 561.98 25 066 0315 11 624.48
355 on 25 066 0355 11 721.28
25 066 0355 17 application
400 on 25 066 0400 11 on
25 066 0400 17 application application
Tee 90˚
Segmented 560 25 326 0560 17 1103.71 25 326 0560 11 1741.52
630 25 326 0630 17 1565.96 25 326 0630 11 2357.91
710 25 326 0710 17 2167.42 25 326 0710 11 3224.85
800 25 326 0800 17 2831.90
Reducing PE100
Tee 90˚ PN6 PN10 PN16
90 x 32 25 016 9032 11 23.59
90 x 50 25 016 9050 11 24.22
110 x 32 25 016 1132 17 29.64 25 016 1132 11 34.81
110 x 50 25 016 1150 11 35.51
125 x 63 25 016 1263 11 49.71
125 x 90
140 x 63 25 016 1463 17 48.41 25 016 1463 11 62.36
140 x 75 25 016 1475 17 48.62 25 016 1475 11 62.36
140 x 90 25 016 1490 17 49.41 25 016 1490 11 63.36
140 x 110 25 016 1411 17 50.44 25 016 1411 11 63.36
160 x 125 25 016 1612 17 94.05 25 016 1612 11 105.15
180 x 63 25 016 1863 17 111.66 25 016 1863 11 130.55
180 x 75 25 016 1875 17 115.07 25 016 1875 11 130.55
180 x 110 25 016 1811 17 111.66
180 x 125 25 016 1812 17 115.07 25 016 1812 11 134.74
200 x 63
200 x 90
200 x 110
200 x 125
200 x 160
225 x 125 25 016 2212 17 152.37 25 016 2212 11 227.29
250 x 110 25 016 2511 17 154.08 25 016 2511 11 300.01
250 x 160 25 016 2516 17 155.78 25 016 2516 11 306.19
Reducing
Tee 90˚
Elongated 63 x 50 25 065 6350 17 10.99 25 065 6350 11 11.91
75 x 32 25 065 7532 11 18.63
75 x 50 25 065 7550 17 16.67 25 065 7550 11 18.63
75 x 63 25 065 7563 17 16.94 25 065 7563 11 18.99
90 x 63 25 065 9063 17 23.73 25 065 9063 11 26.54
90 x 75 25 065 9075 17 23.93 25 065 9075 11 26.74
110 x 63 25 065 1163 17 35.19 25 065 1163 11 39.35
110 x 75 25 065 1175 17 35.19 25 065 1175 11 39.35
110 x 90 25 065 1190 17 36.03 25 065 1190 11 39.91
125 x 90 25 065 1290 11 54.75
125 x 110 25 065 1211 17 48.87 25 065 1211 11 54.75
160 x 63 25 065 1663 17 96.83 25 065 1663 11 107.64
160 x 75 25 065 1675 17 99.81 25 065 1675 11 108.54
160 x 90 25 065 1690 17 99.81 25 065 1690 11 108.54
160 x 110 25 065 1611 17 100.75 25 065 1611 11 111.27
180 x 90 25 065 1890 17 134.66 25 065 1890 11 149.21
180 x 110 25 065 1811 11 149.21
180 x 160 25 065 1816 17 134.66 25 065 1816 11 149.21
200 x 63 25 065 2063 17 180.95 25 065 2063 11 200.73
200 x 90 25 065 2090 17 180.95 25 065 2090 11 200.73
200 x 110 25 065 2011 17 180.95 25 065 2011 11 200.73
200 x 125 25 065 2012 17 180.95 25 065 2012 11 200.73
200 x 160 25 065 2016 17 180.95 25 065 2016 11 200.73
225 x 75 25 065 2275 17 227.25 25 065 2275 11 252.24
225 x 90 25 065 2290 17 227.25 25 065 2290 11 252.24
225 x 110 25 065 2211 17 228.01 25 065 2211 11 253.25
225 x 160 25 065 2216 17 228.65 25 065 2216 11 254.15
225 x 180 25 065 2218 17 229.04 25 065 2218 11 255.05
315 x 90 25 065 3190 17 590.64 25 065 3190 11 641.99
315 x 110 25 065 3111 17 631.97 25 065 3111 11 686.93
315 x 160 25 065 3116 17 631.97 25 065 3116 11 686.93
315 x 200 25 065 3120 17 590.64 25 065 3120 11 641.99
315 x 225 25 065 3122 17 660.70 25 065 3122 11 718.14
315 x 250 25 065 3125 17 660.70 25 065 3125 11 718.14
Bend 90˚ PE100

PN6 PN10 PN16
50
63
75
90
110 25 001 0110 33 16.13
125 25 001 0125 33 18.17
140 25 001 0140 33 23.49
160 25 001 0160 33 30.68
180 25 001 0180 33 37.41
200 25 001 0200 33 46.40
225 25 001 0225 33 57.11
250 25 001 0250 33 70.17 25 001 0250 17 153.04 25 001 0250 11 225.07
280 25 001 0280 33 86.78 25 001 0280 17 198.90 25 001 0280 11 292.65
315 25 001 0315 33 123.18 25 001 0315 17 274.77 25 001 0315 11 404.00
355 25 001 0355 33 329.20 25 001 0355 17 432.39 25 001 0355 11 590.94
400 25 001 0400 33 460.39 25 001 0400 17 606.32 25 001 0400 11 811.53
450 25 001 0450 33 620.25 25 001 0450 17 792.60 25 001 0450 11 1064.88
500 25 001 0500 33 864.53 25 001 0500 171000.20 25 001 0500 11 1373.67
Multi-Bend 90˚
Elongated 20 25 068 0020 11 2.92
25 25 068 0025 11 3.02
32 25 068 0032 11 3.14
40 25 068 0040 11 4.08
50 25 068 0050 11 5.11
63 25 068 0063 17 6.26 25 068 0063 11 7.34
75 25 068 0075 17 9.15 25 068 0075 11 10.10
90 25 068 0090 17 11.92 25 068 0090 11 14.68
110 25 068 0110 17 25.13 25 068 0110 11 27.93
125 25 068 0125 17 31.92 25 068 0125 11 39.34
140 25 068 0140 17 46.38 25 068 0140 11 52.64
160 25 068 0160 17 51.15 25 068 0160 11 64.10
180 25 068 0180 17 63.25 25 068 0180 11 75.92
200 25 068 0200 17 78.31 25 068 0200 11 113.12
225 25 068 0225 17 96.53 25 068 0225 11 134.91
Elbow 90˚
Elongated 250 25 061 0250 17 213.77 25 061 0250 11 238.34
280 25 061 0280 17 323.90 25 061 0280 11 359.88
315 25 061 0315 17 403.08 25 061 0315 11 450.28
Bend 90˚
Elongated 250 25 011 0250 11 254.40
280 25 011 0280 11 330.29
315 25 011 0315 11 456.27
Bend 90˚
Segmented 560 25 331 0560 17 1111.53 25 331 0560 11 1533.71
630 25 331 0630 17 1374.56 25 331 0630 11 1926.44
710 25 331 0710 17 1962.47 25 331 0710 11 2774.87
800 25 331 0800 17 2675.32
Bend 45˚
Segmented 560 25 330 0560 17 788.15 25 330 0560 11 1088.38
630 25 330 0630 17 983.15 25 330 0630 11 1379.85
710 25 330 0710 17 1423.73 25 330 0710 11 2014.23
800 25 330 0800 17 1799.34
Elbow 45˚ PE100

Elongated PN6 PN10 PN16
20 25 060 0020 11 3.69
25 25 060 0025 11 3.95
32 25 060 0032 11 4.77
40 25 060 0040 11 5.96
50 25 060 0050 11 6.79
63 25 060 0063 17 11.15 25 060 0063 11 12.39
75 25 060 0075 17 13.77 25 060 0075 11 15.38
90 25 060 0090 17 17.38 25 060 0090 11 19.28
110 25 060 0110 17 33.27 25 060 0110 11 36.94
125 25 060 0125 17 41.01 25 060 0125 11 45.64
140 25 060 0140 17 53.76 25 060 0140 11 59.71
160 25 060 0160 17 62.20 25 060 0160 11 69.02
180 25 060 0180 17 67.92 25 060 0180 11 75.54
200 25 060 0200 17 92.91 25 060 0200 11 103.24
225 25 060 0225 17 110.85 25 060 0225 11 123.06
250 25 060 0250 17 213.77 25 060 0250 11 238.34
280 25 060 0280 17 323.90 25 060 0280 11 359.88
315 25 060 0315 17 403.08 25 060 0315 11 450.28
Elbow 30˚
Elongated 90 25 019 0090 17 35.04 25 019 0090 11 39.38
110 25 019 0110 17 43.48 25 019 0110 11 49.41
160 25 019 0160 17 94.00 25 019 0160 11 104.87
Bend 45˚ PN6 PN8 PN12.5

Elongated Size Code Price Code Price Code Price
90 25 397 0090 17 49.74 25 397 0090 11 49.74
110 25 397 0110 17 92.54 25 397 0110 11 94.55
125 25 397 0125 17 91.35 25 397 0125 11 98.84
140 25 397 0140 17 108.85 25 397 0140 11 110.31
160 25 397 0160 17 139.49 25 397 0160 11 140.76
180 25 397 0180 17 149.59 25 397 0180 11 169.80
200 25 397 0200 17 161.36 25 397 0200 11 180.84
225 25 397 0225 17 204.50 25 397 0225 11 217.12
250 25 397 0250 17 305.50 25 397 0250 11 339.58
Bend 30˚
90 25 396 0090 17 54.15 25 396 0090 11 60.84
110 25 396 0110 17 92.54 25 396 0110 11 94.55
125 25 396 0125 17 91.35 25 396 0125 11 98.84
140 25 396 0140 17 108.85 25 396 0140 11 110.31
160 25 396 0160 17 139.49 25 396 0160 11 150.22
180 25 396 0180 17 149.59 25 396 0180 11 169.80
200 25 396 0200 17 161.36 25 396 0200 11 180.84
225 25 396 0225 17 204.50 25 396 0225 11 217.12
250 25 396 0250 17 284.04 25 396 0250 11 330.12
Bend 22˚
90 25 395 0090 17 49.74 25 395 0090 11 60.84
110 25 395 0110 17 92.54 25 395 0110 11 94.55
125 25 395 0125 17 91.35 25 395 0125 11 98.84
140 25 395 0140 17 108.85 25 395 0140 11 110.31
160 25 395 0160 17 139.49 25 395 0160 11 150.22
180 25 395 0180 17 149.59 25 395 0180 11 169.80
200 25 395 0200 17 161.36 25 395 0200 11 180.84
225 25 395 0225 17 204.50 25 395 0225 11 217.12
250 25 395 0250 17 284.04 25 395 0250 11 330.12
Bend 11˚
90 25 394 0090 17 49.74 25 394 0090 11 60.84
110 25 394 0110 17 92.54 25 394 0110 11 94.55
125 25 394 0125 17 94.35 25 394 0125 11 98.84
140 25 394 0140 17 108.85 25 394 0140 11 110.31
160 25 394 0160 17 139.49 25 394 0160 11 150.22
180 25 394 0180 17 149.59 25 394 0180 11 169.80
200 25 394 0200 17 161.36 25 394 0200 11 180.84
225 25 394 0225 17 204.50 25 394 0225 11 217.12
250 25 394 0250 17 284.04 25 394 0250 11 330.12
Reducer PE100
Concentric PN6 PN10 PN16
25 x 20 25 009 2520 11 6.07
32 x 20 25 009 3220 11 7.01
32 x 25 25 009 3225 11 7.01
40 x 20 25 009 4020 11 7.95
40 x 25 25 009 4025 11 7.95
40 x 32 25 009 4032 11 7.95
50 x 25 25 009 5025 11 8.40
50 x 32 25 009 5032 11 8.40
50 x 40 25 009 5040 11 8.40
63 x 32 25 009 6332 11 10.16
63 x 40 25 009 6340 11 10.16
63 x 50 25 009 6350 11 10.16
75 x 32 25 009 7532 11 13.00
75 x 40 25 009 7540 11 13.00
75 x 50 25 009 7550 11 13.00
75 x 63 25 009 7563 17 12.43 25 009 7563 11 13.00
90 x 50 25 009 9050 11 13.89
90 x 63 25 009 9063 17 13.89 25 009 9063 11 14.52
90 x 75 25 009 9075 17 13.89 25 009 9075 11 14.52
110 x 50 25 009 1150 11 18.55
110 x 63 25 009 1163 17 17.67 25 009 1163 11 18.55
110 x 75 25 009 1175 17 17.67 25 009 1175 11 18.55
110 x 90 25 009 1190 17 17.67 25 009 1190 11 18.55
125 x 63 25 009 1263 17 22.73 25 009 1263 11 23.74
125 x 75 25 009 1275 17 22.73 25 009 1275 11 23.74
125 x 90 25 009 1290 17 22.73 25 009 1290 11 23.74
125 x 110 25 009 1211 17 22.73 25 009 1211 11 23.74
140 x 75 25 009 1475 17 27.39 25 009 1475 11 28.78
140 x 90 25 009 1490 17 27.39 25 009 1490 11 28.78
140 x 110 25 009 1411 17 27.39 25 009 1411 11 28.78
140 x 125 25 009 1412 17 32.07 25 009 1412 11 28.78
160 x 90 25 009 1690 17 32.07 25 009 1690 11 33.71
160 x 110 25 009 1611 17 32.07 25 009 1611 11 33.71
160 x 125 25 009 1612 17 32.07 25 009 1612 11 33.71
160 x 140 25 009 1614 17 32.07 25 009 1614 11 33.71
180 x 90 25 009 1890 17 50.37 25 009 1890 11 52.76
180 x 110 25 009 1811 17 47.34 25 009 1811 11 49.74
180 x 125 25 009 1812 17 43.67 25 009 1812 11 45.82
180 x 140 25 009 1814 17 41.53 25 009 1814 11 43.56
180 x 160 25 009 1816 17 39.65 25 009 1816 11 41.53
200 x 140 25 009 2014 17 113.37 25 009 2014 11 118.91
200 x 160 25 009 2016 17 100.11 25 009 2016 11 105.16
200 x 180 25 009 2018 17 89.63 25 009 2018 11 94.17
225 x 140 25 009 2214 17 135.71 25 009 2214 11 142.02
225 x 160 25 009 2216 17 116.14 25 009 2216 11 121.94
225 x 180 25 009 2218 17 110.58 25 009 2218 11 116.00
225 x 200 25 009 2220 17 97.45 25 009 2220 11 102.25
250 x 160 25 009 2516 17 155.27 25 009 2516 11 162.84
250 x 180 25 009 2518 17 143.91 25 009 2518 11 150.85
250 x 200 25 009 2521 17 131.92 25 009 2521 11 138.86
250 x 225 25 009 2522 17 125.10 25 009 2522 11 131.29
280 x 200 25 009 2820 17 172.95 25 009 2820 11 173.59
280 x 225 25 009 2822 17 160.97 25 009 2822 11 169.16
280 x 250 25 009 2825 17 157.16 25 009 2825 11 162.84
315 x 200 25 009 3120 17 220.29 25 009 3120 11 231.65
315 x 225 25 009 3122 17 195.04 25 009 3122 11 205.14
315 x 250 25 009 3125 17 178.63 25 009 3125 11 186.83
315 x 280 25 009 3128 17 166.62 25 009 3128 11 174.85
Reducer 63 x 16 25 007 6316 11 4.80

Concentric 75 x 32 25 007 7532 17 7.36 25 007 7532 11 7.68
110 x 63 25 007 1163 33 9.16 25 007 1163 17 9.66 25 007 1163 11 10.19
125 x 75 25 007 1275 33 10.49 25 007 1275 17 10.99 25 007 1275 11 11.51
160 x 110 25 007 1611 33 33.25 25 007 1611 17 35.81 25 007 1611 11 38.38
225 x 160 25 007 2216 33 84.09 25 007 2216 17 94.47 25 007 2216 11 104.09
315 x 225 25 007 3122 33 97.04 25 007 3122 17 107.15 25 007 3122 11 114.80
450 x 315 25 007 4531 33 331.83 25 007 4531 17 367.71 25 007 4531 11 408.46
630 X 450 25 007 6345 33 411.36 25 007 6345 17 554.25
Reducer
Eccentric 250/160 25 005 2516 33 97.04 25 005 2516 17 107.15 25 005 2516 11 114.80
355/250 25 005 3525 33 135.27 25 005 3525 17 142.89 25 005 3525 11 152.89
Reducer PE100
Concentric - Elongated PN6 PN10 PN16
25 x 20 25 067 2520 11 2.45
32 x 20 25 067 3220 11 2.74
32 x 25 25 067 3225 11 2.74
40 x 20 25 067 4020 11 3.95
40 x 25 25 067 4025 11 3.95
40 x 32 25 067 4032 11 3.95
50 x 25 25 067 5025 11 4.89
50 x 32 25 067 5032 11 4.89
50 x 40 25 067 5040 11 4.89
63 x 32 25 067 6332 11 6.51
63 x 40 25 067 6340 11 6.51
63 x 50 25 067 6350 11 6.51
75 x 50 25 067 7550 11 10.08
75 x 63 25 067 7563 17 10.08 25 067 7563 11 10.08
90 x 63 25 067 9063 17 14.12 25 067 9063 11 14.12
90 x 75 25 067 9075 17 14.23 25 067 9075 11 14.23
110 x 63 25 067 1163 17 19.01 25 067 1163 11 19.01
110 x 90 25 067 1190 17 19.01 25 067 1190 11 19.01
125 x 63 25 067 1263 17 22.84 25 067 1263 11 22.84
125 x 90 25 067 1290 17 22.84 25 067 1290 11 22.84
125 x 110 25 067 1211 17 22.88 25 067 1211 11 22.88
140 x 125 25 067 1412 17 32.87 25 067 1412 11 32.87
160 x 90 25 067 1690 17 43.86 25 067 1690 11 43.86
160 x 110 25 067 1611 17 42.32 25 067 1611 11 44.01
160 x 125 25 067 1612 17 44.01 25 067 1612 11 44.01
160 x 140 25 067 1614 17 42.54 25 067 1614 11 42.54
180 x 125 25 067 1812 17 57.02 25 067 1812 11 57.02
180 x 160 25 067 1816 17 57.02 25 067 1816 11 57.02
200 x 160 25 067 2016 17 62.51 25 067 2016 11 62.51
225 x 160 25 067 2216 17 100.53 25 067 2216 11 100.53
250 x 160 25 067 2516 17 135.94 25 067 2516 11 135.94
250 x 200 25 067 2521 17 142.19 25 067 2521 11 142.19
250 x 225 25 067 2522 17 142.19 25 067 2522 11 142.19
280 x 250 25 067 2825 17 189.50 25 067 2825 11 189.50
315 x 200 25 067 3120 17 243.81 25 067 3120 11 243.81
315 x 225 25 067 3122 17 243.81 25 067 3122 11 243.81
315 x 250 25 067 3125 17 243.81 25 067 3125 11 243.81
Reducer
Eccentric - Elongated
25 x 20 25 069 2520 11 2.72
32 x 25 25 069 3225 11 3.16
40 x 25 25 069 4025 11 4.32
40 x 32 25 069 4032 11 4.32
50 x 32 25 069 5032 11 5.39
50 x 40 25 069 5040 11 5.39
63 x 32 25 069 6332 11 7.76
63 x 40 25 069 6340 11 7.76
63 x 50 25 069 6350 17 7.21 25 069 6350 11 7.76
75 x 50 25 069 7550 17 11.08 25 069 7550 11 11.98
75 x 63 25 069 7563 17 11.08 25 069 7563 11 11.98
90 x 63 25 069 9063 17 15.55 25 069 9063 11 16.77
90 x 75 25 069 9075 17 15.55 25 069 9075 11 16.77
110 x 63 25 069 1163 17 20.92 25 069 1163 11 22.60
110 x 90 25 069 1190 17 20.92 25 069 1190 11 22.60
125 x 63 25 069 1263 17 25.11 25 069 1263 11 27.11
125 x 90 25 069 1290 17 25.11 25 069 1290 11 27.11
125 x 110 25 069 1211 17 25.11 25 069 1211 11 27.11
140 x 125 25 069 1412 17 36.17 25 069 1412 11 39.02
160 x 90 25 069 1690 17 48.23 25 069 1690 11 52.11
160 x 110 25 069 1611 17 48.23 25 069 1611 11 52.11
160 x 125 25 069 1612 17 48.23 25 069 1612 11 52.11
160 x 140 25 069 1614 17 48.23 25 069 1614 11 52.11
180 x 90 25 069 1890 11 67.76
180 x 125 25 069 1812 17 62.74 25 069 1812 11 74.25
180 x 160 25 069 1816 17 62.74 25 069 1816 11 119.42
200 x 160 25 069 2016 17 68.75 25 069 2016 11 119.42
200 x 180 25 069 2018 17 68.75 25 069 2018 11 67.76
225 x 160 25 069 2216 17 110.57 25 069 2216 11 67.76
225 x 180 25 069 2218 17 110.57 25 069 2218 11 74.25
225 x 200 25 069 2220 17 110.57 25 069 2220 11 119.42
250 x 200 25 069 2521 17 145.12 25 069 2521 11 156.72
250 x 225 25 069 2522 17 145.12 25 069 2522 11 156.72
Union PE100
FPM Seal PN6 PN10 PN16
20 25 024 0120 11 13.92
25 25 024 0125 11 15.16
32 25 024 0132 11 18.23
40 25 024 0140 11 25.76
50 25 024 0150 11 36.44
63 25 024 0163 11 49.58
Cap
Elongated 20 25 064 0020 11 2.86
25 25 064 0025 11 3.13
32 25 064 0032 11 3.95
40 25 064 0040 11 4.89
50 25 064 0050 11 6.41
63 25 064 0063 17 8.43 25 064 0063 11 8.43
75 25 064 0075 17 13.05 25 064 0075 11 13.05
90 25 064 0090 17 20.21 25 064 0090 11 20.21
110 25 064 0110 17 26.90 25 064 0110 11 26.90
125 25 064 0125 17 29.07 25 064 0125 11 29.07
140 25 064 0140 17 36.37 25 064 0140 11 36.37
160 25 064 0160 17 40.75 25 064 0160 11 40.75
180 25 064 0180 17 52.98 25 064 0180 11 52.98
200 25 064 0200 17 66.00 25 064 0200 11 66.00
225 25 064 0225 17 81.17 25 064 0225 11 81.17
250 25 064 0250 17 106.21 25 064 0250 11 118.06
280 25 064 0280 17 150.85 25 064 0280 11 167.70
315 25 064 0315 17 201.75 25 064 0315 11 225.46
Cap
Short Spigot 355 25 004 0355 11 249.60
400 25 004 0400 11 342.18
450 25 004 0450 11 475.03
500 25 004 0500 11 595.80
Ventilation
Cap
Elongated 63 - 25 064 1063 11 44.42
90 25 064 1090 17 54.97 25 064 1090 11 54.96
110 25 064 1110 17 60.18 25 064 1110 11 60.18
125 25 064 1125 17 62.11 25 064 1125 11 62.11
160 25 064 1160 17 74.71 25 064 1160 11 74.70
180 25 064 1180 17 97.87 25 064 1180 11 97.87
200 25 064 1200 17 101.46 25 064 1200 11 101.46
225 25 064 1225 17 108.52 25 064 1225 11 108.52
Adaptor
Spigot x Female BSP 20 x 1/2 25 032 2020 11 4.79
Thread 25 x 3/4 25 032 2525 11 5.42
32 x 1 25 032 3232 11 7.09
40 x 11/4 25 032 4040 11 8.13
50 x 11/2 25 032 5050 11 12.78
63 x 2 25 032 6363 11 16.00
Adaptor
Spigot x Male BSP 20 x 1/2 25 033 2020 11 3.75
Thread 25 x 3/4 25 033 2525 11 4.49
32 x 1 25 033 3232 11 5.69
40 x 11/4 25 033 4040 11 6.84
50 x 11/2 25 033 5050 11 11.20
63 x 2 25 033 6363 11 14.18
fusion spigot flange
Stub Flange PE100

PN6 PN10 PN16
20
25 25 012 0025 11 2.29
32 25 012 0032 11 2.72
40 25 012 0040 11 3.22
50 25 012 0050 11 3.96
63 25 012 0063 17 4.45 25 012 0063 11 4.95
75 25 012 0075 17 5.25 25 012 0075 11 5.86
90 25 012 0090 17 7.68 25 012 0090 11 8.38
110 25 012 0110 33 9.78 25 012 0110 17 9.78 25 012 0110 11 10.79
125 25 012 0125 33 12.01 25 012 0125 17 12.01 25 012 0125 11 13.01
140 25 012 0140 33 13.93 25 012 0140 17 13.93 25 012 0140 11 15.19
160 25 012 0160 33 17.25 25 012 0160 17 17.25 25 012 0160 11 19.15
180 25 012 0180 33 25.20 25 012 0180 17 31.49 25 012 0180 11 32.77
200 25 012 0200 33 32.56 25 012 0200 17 33.86 25 012 0200 11 35.24
225 25 012 0225 33 33.94 25 012 0225 17 35.28 25 012 0225 11 36.50
250 25 012 0250 33 47.89 25 012 0250 17 50.44 25 012 0250 11 55.41
280 25 012 0280 33 51.64 25 012 0280 17 55.41 25 012 0280 11 60.53
315 25 012 0315 33 61.86 25 012 0315 17 67.65 25 012 0315 11 71.31
355 25 012 0355 33 105.81 25 012 0355 17 115.93 25 012 0355 11 126.61
400 25 012 0400 33 219.81 25 012 0400 17 234.27 25 012 0400 11 249.39
450 25 012 0450 33 257.41 25 012 0450 17 276.08 25 012 0450 11 292.13
500 25 012 0500 33 312.63 25 012 0500 17 340.36 25 012 0500 11 369.93
560 25 012 0560 33 369.93 25 012 0560 17 407.41
630 25 012 0630 33 426.08 25 012 0630 17 471.83
Stub Flange
Elongated 20 25 062 0020 11 2.99
25 25 062 0025 11 3.13
32 25 062 0032 11 3.68
40 25 062 0040 11 4.35
50 25 062 0050 11 5.30
63 25 062 0063 17 6.68 25 062 0063 11 6.68
75 25 062 0075 17 9.07 25 062 0075 11 8.65
90 25 062 0090 17 11.28 25 062 0090 11 11.28
110 25 062 0110 17 14.40 25 062 0110 11 14.40
125 25 062 0125 17 17.51 25 062 0125 11 17.51
140 25 062 0140 17 22.58 25 062 0140 11 22.58
160 25 062 0160 17 25.81 25 062 0160 11 25.81
180 25 062 0180 17 39.80 25 062 0180 11 39.80
200 25 062 0200 17 45.38 25 062 0200 11 45.38
225 25 062 0225 17 48.90 25 062 0225 11 48.90
250 25 062 0250 17 67.67 25 062 0250 11 75.17
280 25 062 0280 17 102.45 25 062 0280 11 113.82
315 25 062 0315 17 134.41 25 062 0315 11 144.49
355 25 062 0355 17 244.28 25 062 0355 11 262.52
400 25 062 0400 17 430.95 25 062 0400 11 463.12
Full Face
Flange
Elongated Steel Core 90 25 162 0090 11 78.84
110 25 162 0110 11 104.71
125 25 162 0125 11 107.77
160 25 162 0160 11 147.82
180 25 162 0180 11 207.36
Technical Resources
Try our online technical catalogue
www.ipsflowsystems.com
Or call our technical team on:
0800 975 79 71
flanges
Stub Gasket EPDM FPM

Size Code Price Code Price
20 861-_-005 0.47 862-_-005 2.21
25 861-_-007 0.55 862-_-007 3.28
32 861-_-010 0.60 862-_-010 4.33
40 861-_-012 0.75 862-_-012 6.94
50 861-_-015 0.91 862-_-015 7.59
63 861-_-020 1.56 862-_-020 10.00
75 861-_-075 1.91 862-_-075 14.47
90 861-_-031 2.05 862-_-031 18.88
110 861-_-041 2.98 862-_-041 32.21
125 861-_-040 2.98 862-_-040 32.21
140 861-_-051 3.84 862-_-051 53.75
160 861-_-061 4.40 862-_-061 53.75
180 861-_-180 8.73 862-_-180 64.38
200 861-_-080 8.73 862-_-080 64.38
225 861-_-082 8.73 862-_-082 64.38
250 861-_-100 10.70 862-_-100 87.63
280 861-_-101 10.70 862-_-101 87.63
315 861-_-121 12.13 862-_-121 91.48
355 861-_-141 17.10 862-_-141 142.81
400 861-_-161 18.85 862-_-161 164.40
Insert ‘ISO’ for NP10/16; ‘A’ for ANSI 150; ‘E’ for Table D/E
Backing Ring NP 10 ANSI 150

Polypropylene with steel Size Code Price Code Price
core 20 14 014 0020 11* 6.41 11 013 0020 11 6.41
25 14 014 0025 11* 7.04 11 013 0025 11 7.04
32 14 014 0032 11* 9.01 11 013 0032 11 9.01
40 14 014 0040 11* 11.42 11 013 0040 11 11.42
50 14 014 0050 11* 13.34 11 013 0050 11 13.34
63 14 014 0063 11* 15.47 11 013 0063 11 15.47
75 14 014 0075 11* 17.17 11 013 0075 11 17.17
90 14 014 0090 11* 20.28 11 013 0090 11 20.28
110 14 014 0110 11* 24.12 11 013 0110 11 24.12
125 14 014 0125 11* 24.12
140 14 014 0140 11* 37.15
160 14 014 0160 11* 42.54 11 013 0160 11 42.54
180 14 014 0180 11* 42.54
200 14 014 0200 11* 60.57 11 013 0200 11 60.57
225 14 014 0225 11* 60.57
250 14 014 0250 11* 96.72 11 013 0250 11 96.72
280 14 014 0280 11* 96.72
315 14 014 0315 11* 121.54 11 013 0315 11 121.54
355 14 014 0355 11* 225.98
400 14 014 0400 11* 290.01
450 14 014 0450 11* 358.79
500 14 014 0500 11* 358.79
560 14 014 0560 11* 486.42
630 14 014 0630 11* 486.42
*Black
Backing Ring NP10 ANSI 150

Galvanised Mild Steel Size Code Price Code Price
20 860-005-12NP 6.10 860-005-12A 6.10
25 860-007-12NP 6.46 860-007-12A 6.46
32 860-010-12NP 7.67 860-010-12A 7.67
40 860-012-12NP 8.15 860-012-12A 8.15
50 860-015-12NP 8.94 860-015-12A 8.94
63 860-020-11NP 12.63 860-020-11A 12.63
75 860-025-11NP 17.29 860-025-11A 17.29
90 860-030-11NP 20.00 860-030-11A 20.00
110 860-040-11NP 25.58 860-040-11A 25.58
125 860-125-11NP 35.61 860-125-11A 35.61
140 860-050-12NP 35.61 860-050-12A 35.61
160 860-060-14NP 40.60 860-060-14A 40.60
180 860-180-11NP 46.80 860-180-11A 46.80
200 860-080-11N 57.09 860-080-11A 57.09
225 860-225-12N 57.09 860-225-12A 57.09
250 860-100-13N 79.28 860-100-13A 79.28
280 860-280-11N 79.28 860-280-11A 79.28
315 860-120-15N 107.77 860-120-15A 107.77
355 860-140-12N 300.57 860-140-12A 300.57
400 860-160-12N 368.92 860-160-12A 368.92
valves
AGRU Ball Valve

Description: In-line one-piece ball valve
Mounting: In any position
Maximum Fluid Pressure at 20˚C: 16 bar
Fluid Temperature Range: -20˚C - +50˚C
Construction:
Body: PE100
Seats: PE100
Seals: EPDM
End Connections: Fusion spigots
MM Fusion Spigots
32 25.333.0032.11 127.20
50 25.333.0050.11 164.30
63 25.333.0063.11 280.90
90 25.333.0090.11 371.00
110 25.333.0110.11 397.50
125 25.333.0125.11 443.08
160** 25.333.3160.11 1369.52
180** 25.333.3180.11 1380.12
225** 25.333.3225.11 2014.00
**Supplied with Gear Operation
Pipe Availability
We typically hold over
120 miles of pipe
in stock for immediate despatch
PE80 electrically conductive
y
ricall
pipe and fittings Elect ctive
u
cond de
gra
Pipe PE 80-EL
PN3.2/S-16/SDR33 PN6/S-8.3/SDR17 PN10/S-5/SDR11
Size Code Price/m Code Price/m Code Price/m

32 - - - - 28 705 0032 11 8.40
40 - - - - 28 705 0040 11 13.38
50 - - - - 28 705 0050 11 20.44
63 - - - - 28 705 0063 11 32.45
75 - - - - 28 705 0075 11 45.20
90 - - 28 705 0090 17 42.42 28 705 0090 11 64.89
110 28 705 0110 33 35.73 28 705 0110 17 63.37 28 705 0110 11 96.69
125 28 705 0125 33 46.58 28 705 0125 17 81.43 28 705 0125 11 124.72
160 28 705 0160 33 74.60 28 705 0160 17 133.18 28 705 0160 11 205.14
180 28 705 0180 33 94.05 28 705 0180 17 167.90 28 705 0180 11 258.16
200 28 705 0200 33 117.02 28 705 0200 17 207.66 28 705 0200 11 318.75
225 28 705 0225 33 147.07 28 705 0225 17 262.56 28 705 0225 11 403.96
250 28 705 0250 33 181.78 28 705 0250 17 324.43 28 705 0250 11 495.48
315 28 705 0315 33 287.83 28 705 0315 17 513.16 28 705 0315 11 787.71
400 28 705 0400 33 460.14 - - - -
Standard length 5m
Please note that a transportation surcharge may be applied on pipe diameters 250mm or larger - please enquire
for details.
Tee 90º PN3.2 PN6 PN10

32 - - - - 28 006 0032 11 5.74
40 - - - - 28 006 0040 11 8.65
50 - - - - 28 006 0050 11 11.74
63 - - - - 28 006 0063 11 18.31
75 - - - - 28 006 0075 11 36.74
90 - - - - 28 006 0090 11 54.79
110 - - 28 006 0110 17 68.42 28 006 0110 11 80.42
125 - - 28 006 0125 17 95.05 28 006 0125 11 110.71
160 - - 28 006 0160 17 210.81 28 006 0160 11 236.07
180 - - 28 006 0180 17 258.78 28 006 0180 11 303.61
200 - - 28 006 0200 17 338.32 28 006 0200 11 412.17
225 - - 28 006 0225 17 414.06 28 006 0225 11 516.95
250 - - 28 006 0250 17 549.13 28 006 0250 11 656.43
315 - - 28 006 0315 17 826.84 28 006 0315 11 1259.84
Free Training
We can provide free installer
training either on site or at our
bespoke training facility.
Contact Tony Charlton or
Tom Tate on:
0800 975 79 71
PE80 electrically conductive
Bend 90º PN3.2 PN6 PN10

32 - - - - 28 001 0032 11 5.88
40 - - - - 28 001 0040 11 7.63
50 - - - - 28 001 0050 11 9.60
63 - - - - 28 001 0063 11 13.76
75 - - - - 28 001 0075 11 18.93
90 - - - - 28 001 0090 11 27.39
110 - - 28 001 0110 17 50.75 28 001 0110 11 42.80
125 - - 28 001 0125 17 64.75 28 001 0125 11 73.34
160 - - 28 001 0160 17 103.38 28 001 0160 11 119.54
180 - - 28 001 0180 17 128.14 28 001 0180 11 142.02
200 - - 28 001 0200 17 159.05 28 001 0200 11 211.45
225 - - 28 001 0225 17 195.04 28 001 0225 11 252.47
250 - - 28 001 0250 17 329.48 28 001 0250 11 484.12
315 - - 28 001 0315 17 592.68 28 001 0315 11 781.40
Reducer
Concentric Size Code Price Code Price Code Price
63x16 - - - - 28 007 6316 11 10.45
110x63 - - - - 28 007 1163 11 21.97
160x110 - - 28 007 1611 17 77.13 28 007 1611 11 82.56
225x160 - - 28 007 2216 17 203.25 28 007 2216 11 224.08
315x225 - - 28 007 3122 17 230.39 28 007 3122 11 248.06
Stub Flange
32 - - - - 28 012 0032 11 5.81
40 - - - - 28 012 0040 11 6.74
50 - - - - 28 012 0050 11 8.52
63 - - - - 28 012 0063 11 10.66
75 - - - - 28 012 0075 11 12.62
90 - - - - 28 012 0090 11 18.05
110 28 012 0110 33 21.08 28 012 0110 17 21.08 28 012 0110 11 23.60
125 28 012 0125 33 25.89 28 012 0125 17 25.89 28 012 0125 11 28.02
160 28 012 0160 33 37.24 28 012 0160 17 37.24 28 012 0160 11 41.29
180 28 012 0180 33 54.29 28 012 0180 17 54.29 28 012 0180 11 64.25
200 28 012 0200 33 65.13 28 012 0200 17 67.91 28 012 0200 11 70.70
225 28 012 0225 33 73.34 28 012 0225 17 75.99 28 012 0225 11 78.51
250 28 012 0250 33 103.38 28 012 0250 17 108.43 28 012 0250 11 119.16
315 28 012 0315 33 133.81 28 012 0315 17 146.43 28 012 0315 11 154.00
355 28 012 0355 33 228.49 - - - -
400 28 012 0400 33 474.02 - - - -
Please refer to previous pages for backing rings and gaskets
FM approved polyethylene
metric sizes
AGRU – Frank has become the first european
manufacturer to achieve Factory Mutual (FM)
PE100
Approval for High Density Polyethylene (PE100)
pipes and fittings for underground fire protection PN12
service. The FM approval means that the pipes and
fittings correspond to the highest requirements -
Size Code Price/m
ensuring consistent quality of the product range -
achieved by means of a third party audit undertaken 63 25 705 0063 11FM 7.07
by FM. 75 25 705 0075 11FM 9.85
90 25 705 0090 11FM 14.13
PE100 piping is ideal for buried applications. It has 110 25 705 0110 11FM 21.08
exceptional ductility and will withstand very 125 25 705 0125 11FM 27.14
unfavourable ground conditions. It is also very easy 140 25 705 0140 11FM 33.96
to install using a simple butt fusion or electro-fusion 160 25 705 0160 11FM 44.69
welding technique. 180 25 705 0180 11FM 56.19
200 25 705 0200 11FM 82.66
Many industrial and automotive groups require FM 225 25 705 0225 11FM 87.61
approval for infrastructure piping systems within 250 25 705 0250 11FM 108.32
their factories. This need can now be satisfied with a 280 25 705 0280 11FM 135.21
comprehensive range of approved pipes and fittings. 315 25 705 0315 11FM 171.69
The FM approval has been issued for the dimension 355 25 705 0355 11FM 217.76
range 63mm to 400mm, and it includes a wide and 400 25 705 0400 11FM 275.84
diverse range of fittings. The system is approved for
use at a service pressure of up to 12 bar. Please note that a transportation
surcharge may be applied on pipe
diameters 250mm or larger - please
IPS can supply the complete range of FM approved enquire for details.
AGRU piping systems together with documentation,
as well as welding equipment for butt or electro
fusion jointing. Comprehensive welder training is
readily available on request.
Jointing FM Approved Polyethylene Systems

PE pipe to pipe and pipe to fitting joints are easy to make, using butt fusion or
electrofusion welds.
Butt Fusion Electro-Fusion

Heating Electro-fusion
Element Socket
Fitting
Pipe Pipe Pipe
Individual Parts Individual Parts
Heating Heating
Finished Joint Finished Joint
Welding equipment is available for sale or hire - see Tools and Installation Equipment.
Detailed installation instructions, as well as free training, is available on request.
FM approved electrofusion fittings
Electrofusion Coupling Electrofusion Elbow 45˚
63 25 173 0063 11FM 10.12 63 25 170 0063 11FM 24.05

75 25 173 0075 11FM 14.44 75 25 170 0075 11FM 34.43
90 25 173 0090 11FM 19.24 90 25 170 0090 11FM 42.88
110 25 173 0110 11FM 23.14 110 25 170 0110 11FM 68.76
125 25 173 0125 11FM 32.52 125 25 170 0125 11FM 86.51
140 25 173 0140 11FM 36.47 160 25 170 0160 11FM 160.25
on
160 25 173 0160 11FM 44.85 180 25 170 0180 11FM application
180 25 173 0180 11FM 64.35 225 25 170 0225 11FM 437.02
200 25 173 0200 11FM 76.00
225 25 173 0225 11FM 97.90
250 25 173 0250 11FM 144.27
280 25 173 0280 11FM 194.93 Electrofusion Reducer
315 25 173 0315 11FM 235.16
355 25 173 0355 11FM 429.90
400 25 173 0400 11FM 539.05 90x63 25 177 9063 11FM 32.31
110x63 25 177 1163 11FM 52.67
Electrofusion Tee 90˚ 110x90 25 177 1190 11FM 52.67
on
125x90 25 177 1290 11FM application
Fusion Spigot Branch
160x90 25 177 1690 11FM 91.86
63 25 176 0063 11FM 24.05 160x110 25 177 1611 11FM 94.20
on
75 25 176 0075 11FM 33.85 180x125 25 177 1812 11FM application
90 25 176 0090 11FM 42.88 225x160 25 177 2216 11FM 213.80
110 25 176 0110 11FM 68.70
125 25 176 0125 11FM 86.51
160 25 176 0160 11FM 160.25
on
180 25 176 0180 11FM application
225 25 176 0225 11FM 437.02 Electrofusion Cap
Electrofusion Elbow 90˚ 63 25 174 0063 11FM 20.87

75 25 174 0075 11FM 33.00
90 25 174 0090 11FM 46.63
63 25 171 0063 11FM 24.05 110 25 174 0110 11FM 59.83
75 25 171 0075 11FM 34.43 125 25 174 0125 11FM 73.52
90 25 171 0090 11FM 42.88 140 25 174 0140 11FM 96.50
110 25 171 0110 11FM 68.70 160 25 174 0160 11FM 103.28
125 25 171 0125 11FM 86.51 180 25 174 0180 11FM 135.61
160 25 171 0160 11FM 160.25 200 25 174 0200 11FM 160.34
on
180 25 171 0180 11FM application 225 25 174 0225 11FM 189.01
225 25 171 0225 11FM 437.02 250 25 174 0250 11FM 304.02
280 25 174 0280 11FM 416.75
315 25 174 0315 11FM 519.56
Automatic Electrofusion
Welding Machine
• Barcode or manual entry
• Welding is fully monitored throughout
• Illuminated display
• Fault messages displayed plus
warning signal
• Memory records weld
information
• Data output to
PC or printer
• 110v or 230v
supply
Available for sale or hire
FM approved fusion spigot fittings
Reducing
Tee 90˚ PN12 Tee 90˚ PN12
Size Code Price Size Code Price
63 25 006 0063 11FM 9.78 125x63 25 016 1263 11FM 57.40
75 25 006 0075 11FM 19.67 125x90 25 016 1290 11FM 57.40
90 25 006 0090 11FM 29.38 140x63 25 016 1463 11FM 72.01
110 25 006 0110 11FM 43.16 140x90 25 016 1490 11FM 73.19
125 25 006 0125 11FM 59.41 140x110 25 016 1411 11FM 73.19
140 25 006 0140 11FM 75.29 160x125 25 016 1612 11FM 121.44
160 25 006 0160 11FM 126.65 180x63 25 016 1863 11FM 150.78
180 25 006 0180 11FM 162.31 180x110 25 016 1811 11FM 150.78
200 25 006 0200 11FM 232.68 180x125 25 016 1812 11FM 155.62
225 25 006 0225 11FM 276.65 225x125 25 016 2212 11FM 262.53
250 25 006 0250 11FM 351.97 250x110 25 016 2511 11FM 346.50
280 25 006 0280 11FM 474.11 250x160 25 016 2516 11FM 353.66
315 25 006 0315 11FM 676.00
355 25 006 0355 11FM 790.04
400 25 006 0400 11FM 1179.64
Reducing
Tee 90˚ Tee 90˚
63 25 066 0063 11FM 13.16 Elongated 63x50 25 065 6350 11FM 13.74
Elongated
75 25 066 0075 11FM 21.86 90x63 25 065 9063 11FM 30.65
90 25 066 0090 11FM 31.08 110x63 25 065 1163 11FM 45.47
110 25 066 0110 11FM 45.49 110x90 25 065 1190 11FM 46.11
125 25 066 0125 11FM 62.44 125x90 25 065 1290 11FM 63.24
140 25 066 0140 11FM 100.34 125x110 25 065 1211 11FM 63.24
160 25 066 0160 11FM 130.21 160x63 25 065 1663 11FM 124.32
180 25 066 0180 11FM 170.86 160x90 25 065 1690 11FM 125.37
200 25 066 0200 11FM 244.89 160x110 25 065 1611 11FM 128.53
225 25 066 0225 11FM 290.89 180x90 25 065 1890 11FM 172.34
on
250 25 066 0250 11FM 375.60 180x110 25 065 1811 11FM application
280 25 066 0280 11FM 561.65 180x160 25 065 1816 11FM 172.34
315 25 066 0315 11FM 721.28 225x90 25 065 2290 11FM 291.35
225x110 25 065 2211 11FM 292.52
225x160 25 065 2216 11FM 293.56
225x180 25 065 2218 11FM 294.57
315x110 25 065 3111 11FM 793.40
315x160 25 065 3116 11FM 793.40
315x225 25 065 3122 11FM 829.45
315x250 25 065 3125 11FM 829.45
Pressure Ratings
i FM approved polyethylene fittings are suitable

for use handling fluids at pressures up to 12
bar at 20˚C.
Reducer PN12 Cap PN12

Concentric Size Code Price Elongated Size Code Price
90x63 25 009 9063 11FM 15.99 63 25 064 0063 11FM 9.75
110x63 25 009 1163 11FM 20.32 75 25 064 0075 11FM 15.03
110x90 25 009 1190 11FM 20.32 90 25 064 0090 11FM 22.92
125x63 25 009 1263 11FM 26.11 110 25 064 0110 11FM 31.08
125x90 25 009 1290 11FM 26.11 125 25 064 0125 11FM 33.58
125x110 25 009 1211 11FM 26.11 140 25 064 0140 11FM 42.00
140x90 25 009 1490 11FM 31.61 160 25 064 0160 11FM 47.07
140x110 25 009 1411 11FM 31.61 180 25 064 0180 11FM 61.18
140x125 25 009 1412 11FM 36.94 200 25 064 0200 11FM 76.28
160x90 25 009 1690 11FM 36.94 225 25 064 0225 11FM 91.01
160x110 25 009 1611 11FM 36.94 250 25 064 0250 11FM 136.35
160x125 25 009 1612 11FM 36.94 280 25 064 0280 11FM 193.15
160x140 25 009 1614 11FM 36.94 315 25 064 0315 11FM 260.41
180x90 25 009 1890 11FM 58.03
180x110 25 009 1811 11FM 54.64
180x125 25 009 1812 11FM 50.37
180x140 25 009 1814 11FM 47.83 Cap
180x160 25 009 1816 11FM 45.64 Short Spigot 355 25 004 0355 11FM 193.68
225x140 25 009 2214 11FM 156.15 400 25 004 0400 11FM 260.41
225x160 25 009 2216 11FM 134.03
225x180 25 009 2218 11FM 127.62
250x160 25 009 2516 11FM 178.94
250x180 25 009 2518 11FM 165.57
250x225 25 009 2522 11FM 144.46
280x200 25 009 2820 11FM 208.47
280x225 25 009 2822 11FM 194.36
280x250 25 009 2825 11FM 187.15
315x225 25 009 3122 11FM 224.99
315x250 25 009 3125 11FM 205.66
Reducer
Concentric - Elongated Size Code Price
90x63 25 067 9063 11FM 16.33
110x63 25 067 1163 11FM 21.96
110x90 25 067 1190 11FM 21.96
125x63 25 067 1263 11FM 26.37
125x90 25 067 1290 11FM 26.37
125x110 25 067 1211 11FM 26.42
140x125 25 067 1412 11FM 37.96
160x90 25 067 1690 11FM 50.67
160x110 25 067 1611 11FM 50.82
160x125 25 067 1612 11FM 50.82
160x140 25 067 1614 11FM 49.15
180x125 25 067 1812 11FM 65.87
180x160 25 067 1816 11FM 65.87
225x160 25 067 2216 11FM 116.12
250x160 25 067 2516 11FM 157.02
250x225 25 067 2522 11FM 164.23
280x250 25 067 2825 11FM 218.87
315x225 25 067 3122 11FM 281.61
315x250 25 067 3125 11FM 281.61
Machine Hire
Don’t have the tools?
We have a dedicated fleet of
welding equipment available to
hire on a weekly basis.
Bend 90˚ PN12 Bend 60˚ PN12

Size Code Price Elongated Size Code Price
250 25 001 0250 11FM 259.96 90 25 398 0090 11FM
280 25 001 0280 11FM 336.76 110 25 398 0110 11FM
315 25 001 0315 11FM 466.61 125 25 398 0125 11FM
355 25 001 0355 11FM 682.53 140 25 398 0140 11FM
400 25 001 0400 11FM 937.32 160 25 398 0160 11FM
180 25 398 0180 11FM on tion
lica
200 25 398 0200 11FM app
225 25 398 0225 11FM
250 25 398 0250 11FM
280 25 398 0280 11FM
315 25 398 0315 11FM
Multi-Bend 90˚
Elongated 63 25 068 0063 11FM 8.64
75 25 068 0075 11FM 11.89 Bend 45˚
90 25 068 0090 11FM 17.27 Elongated Size Code Price
110 25 068 0110 11FM 32.85 90 25 397 0090 11FM 62.12
125 25 068 0125 11FM 46.29 110 25 397 0110 11FM 118.22
on
160 25 068 0160 11FM 75.42 on
180 25 068 0180 11FM 89.32 160 25 397 0160 11FM 175.35
200 25 068 0200 11FM 133.08 180 25 397 0180 11FM 211.94
225 25 068 0225 11FM 158.73 on
225 25 397 0225 11FM 271.53
250 25 397 0250 11FM 424.71
on
Elbow 90˚ 280 25 397 0280 11FM application
on
Elongated 250 25 061 0250 11FM 275.27 315 25 397 0315 11FM application
280 25 061 0280 11FM 414.49

315 25 061 0315 11FM 520.08
Bend 30˚
Elongated Size Code Price
90 25 396 0090 11FM 62.12
110 25 396 0110 11FM 118.22
on
on
160 25 396 0160 11FM 187.55
180 25 396 0180 11FM 211.94
on
225 25 396 0225 11FM 271.53
Elbow 45˚ 250 25 396 0250 11FM 412.79
Elongated Size Code Price on
63 25 060 0063 11FM 14.30 on
90 25 060 0090 11FM 22.26

110 25 060 0110 11FM 42.67
125 25 060 0125 11FM 52.71
Bend 22˚
140 25 060 0140 11FM 68.96 Elongated Size Code Price
160 25 060 0160 11FM 79.72 90 25 395 0090 11FM 62.12
180 25 060 0180 11FM 87.26 110 25 395 0110 11FM 118.22
on
on
250 25 060 0250 11FM 275.27 160 25 395 0160 11FM 175.35
280 25 060 0280 11FM 414.48 180 25 395 0180 11FM 211.94
315 25 060 0315 11FM 520.08 200 25 395 0200 11FM on
application
225 25 395 0225 11FM 271.53
250 25 395 0250 11FM 424.71
on
on
Bend 11˚
Elongated Size Code Price
90 25 394 0090 11FM 62.12
110 25 394 0110 11FM 118.22
on
on
160 25 394 0160 11FM 175.35
180 25 394 0180 11FM 211.94
on
225 25 394 0225 11FM 271.53
250 25 394 0250 11FM 424.71
on
on
Stub Flange PN12 Backing Ring NP10

Size Code Price Polypropylene with Steel 63 14 014 0063 11* 15.47
63 25 012 0063 11FM 5.72 Core 75 14 014 0075 11* 17.17
75 25 012 0075 11FM 6.75 90 14 014 0090 11* 20.28
90 25 012 0090 11FM 9.68 110 14 014 0110 11* 24.12
110 25 012 0110 11FM 12.45 125 14 014 0125 11* 24.12
125 25 012 0125 11FM 15.03 140 14 014 0140 11* 37.15
140 25 012 0140 11FM 17.55 160 14 014 0160 11* 42.54
160 25 012 0160 11FM 22.13 180 14 014 0180 11* 42.54
180 25 012 0180 11FM 34.38 200 14 014 0200 11* 60.57
200 25 012 0200 11FM 37.84 225 14 014 0225 11* 60.57
225 25 012 0225 11FM 42.15 250 14 014 0250 11* 96.72
250 25 012 0250 11FM 63.99 280 14 014 0280 11* 96.72
280 25 012 0280 11FM 69.73 315 14 014 0315 11* 121.54
315 25 012 0315 11FM 82.36 355 14 014 0355 11* 255.98
355 25 012 0355 11FM 146.22 400 14 014 0400 11* 290.01
400 25 012 0400 11FM 288.05
*Black
Stub Flange Blind Flange NP10

Elongated 63 25 062 0063 11FM 7.72 Polypropylene with steel 63 14 045 0063 11 61.24
75 25 062 0075 11FM 10.02 insert 75 14 045 0075 11 71.67
90 25 062 0090 11FM 13.02 90 14 045 0090 11 78.92
110 25 062 0110 11FM 16.63 110 14 045 0110 11 107.72
125 25 062 0125 11FM 20.23 125 14 045 0125 11 107.72
140 25 062 0140 11FM 26.09 140 14 045 0140 11 132.36
160 25 062 0160 11FM 29.82 160 14 045 0160 11 167.00
180 25 062 0180 11FM 45.96 180 14 045 0180 11 167.00
200 25 062 0200 11FM 52.43 200 14 045 0200 11 185.81
225 25 062 0225 11FM 56.47 225 14 045 0225 11 185.81
250 25 062 0250 11FM 86.82 250 14 045 0250 11 242.87
280 25 062 0280 11FM 131.09 280 14 045 0280 11 242.87
315 25 062 0315 11FM 166.89 315 14 045 0315 11 354.20
355 14 045 0355 11 691.71
Stub Flange 400 14 045 0400 11 790.52
To adapt to cast iron 63 25 912 0063 11FM
flanges 90 25 912 0090 11FM
110 25 912 0110 11FM
125 25 912 0125 11FM
140 25 912 0140 11FM
160 25 912 0160 11FM on tion
180 25 912 0180 11FM lica
app
225 25 912 0225 11FM
250 25 912 0250 11FM
280 25 912 0280 11FM
315 25 912 0315 11FM
355 25 912 0355 11FM
400 25 912 0400 11FM
Connection to other materials
i Connecting to metal pipe systems, particularly cast or

ductile iron, requires care as the pipe diameters differ
widely. We can advise on the selection of the correct
flange components.

Polyethylene: Section Guide

Uploaded by

Polyethylene: Section Guide

Uploaded by

polyethylene

Polyethylene is now in widespread use for industrial

Polyethylene is joined by heat, and both socket fusion and

 Not resistant to strong oxidising acids

standards and approvals

IPS Flow Systems

Polyethylene has excellent resistance against a variety of chemicals, however strong

Black coloured PE is stabilised against the effects of UV radiation, and it may

Density 0.94 g/cm 3

Modulus of Elasticity 950 MPa 1100 MPa

Surface Resistance >1013 Ω >1013 Ω Physiological characteristics

Standard Dimensional Ratio (SDR)

Jointing Polyethylene Systems

Socket Fusion Butt Fusion Electro-Fusion

Pipe Fitting Pipe Pipe Pipe

Individual Parts Individual Parts Individual Parts

Heating Heating Heating

Finished Joint Finished Joint Finished Joint

Size Code Price/m Code Price/m

Non Standard Lengths

i Depending on the quantity and lead time

i A range of PE80 pipes and fittings is designed

Size Code Price/m Code Price/m

Pipework Support Temperature De-Rating Factors

Tee 90˚ Union

20 25 051 0020 07 4.38

20 25 050 0020 07 5.30

Stub Flange Backing Ring Table D/E

Gasket Backing Ring NP10/16

Gasket Backing Ring ANSI 150

i Maximum working pressures (socket fusion):-

Backing Ring ANSI 150

Electrofusion Coupling Electrofusion Elbow 45˚

20 25 173 0020 11 4.25 20 25 170 0020 11 11.47

i Polyethylene electrofusion fittings are suitable

Electrofusion Adaptor Electrofusion Elbow 90˚

Electrofusion Elbow 90˚

Reducing Coupling Male Adaptor

20x16 7110162 5.58 16x3/8 7026163 2.02

16x1/2 7036165 2.44

End Plug 90º Tee

20 7120020 3.76 16x1/2x16 7146165 3.96

90º Tee 90º Elbow

Tee 90˚ PE100

Bend 90˚ PE100

Elbow 45˚ PE100

Bend 45˚ PN6 PN8 PN12.5

Reducer 63 x 16 25 007 6316 11 4.80

Stub Flange PE100

Stub Gasket EPDM FPM

Backing Ring NP 10 ANSI 150

Backing Ring NP10 ANSI 150

AGRU Ball Valve

PN3.2/S-16/SDR33 PN6/S-8.3/SDR17 PN10/S-5/SDR11

Size Code Price/m Code Price/m Code Price/m

Tee 90º PN3.2 PN6 PN10

Bend 90º PN3.2 PN6 PN10

Jointing FM Approved Polyethylene Systems

Butt Fusion Electro-Fusion

Pipe Pipe Pipe

Individual Parts Individual Parts

Finished Joint Finished Joint

Electrofusion Coupling Electrofusion Elbow 45˚

63 25 173 0063 11FM 10.12 63 25 170 0063 11FM 24.05

Electrofusion Elbow 90˚ 63 25 174 0063 11FM 20.87

i FM approved polyethylene fittings are suitable

Reducer PN12 Cap PN12

Bend 90˚ PN12 Bend 60˚ PN12

280 25 061 0280 11FM 414.49

90 25 060 0090 11FM 22.26

Stub Flange PN12 Backing Ring NP10

Stub Flange Blind Flange NP10

Connection to other materials

i Connecting to metal pipe systems, particularly cast or

You might also like

Not resistant to strong oxidising acids