Infrared Remote Control Receiver Module IRM-2638T: Features

Infrared Remote Control Receiver Module
IRM-2638T
Block Diagram
Vs
OUT
Pin Configuration
IN CGA &
1. OUT filter Demodulator µC
Input
2. GND
1 2 3
3. VCC
Carrier
frequency f0 Oscillator AGC/ATC & digital
control
Modulated IR signal
Features min 10 pulses GND
‧ High protection ability against EMI

‧ Circular lens for improved reception characteristics
‧ Line-up for various center carrier frequencies.
‧ Low voltage and low power consumption.
‧ High immunity against ambient light.
‧ Photodiode with integrated circuit.
‧ TTL and CMOS compatibility.
‧ Long reception distance.
‧ High sensitivity.
‧ Pb free and RoHS compliant.
Description
The IRM-2638T device is miniature type infrared remote control system receiver which has been developed and
designed by utilizing the most updated IC technology.
The PIN diode and preamplifier are assembled onto a lead frame and molded into a black epoxy package which
operates as an IR filter. The demodulated output signal can directly be decoded by a microprocessor..
1 Copyright © 2010, Everlight All Rights Reserved. Release Date : June 06, 2013. Issue No: DMO-0000372 Rev.2
www.everlight.com
DATASHEET
IRM-2638T
Applications
• Light detecting portion of remote control
• AV instruments such as Audio, TV, VCR, CD, MD, etc.
• Home appliances such as Air-conditioner, Fan, etc.
• The other equipments with wireless remote control.
• CATV set top boxes
• Multi-media Equipment
Application Circuit
RC Filter should be connected closely between Vcc pin and GND pin.
℃)
Absolute Maximum Ratings (Ta=25℃
Parameter Symbol Rating Unit
Supply Voltage Vcc 6 V
Operating Temperature Topr -25 ~ +85 ℃

Storage Temperature Tstg -40 ~ +85 ℃
Soldering Temperature
*1
Tsol 260 ℃
*1
4mm from mold body for less than 10 seconds
2 Copyright © 2010, Everlight All Rights Reserved. Release Date : June 06, 2013. Issue No: DMO-0000372 Rev.2 www.everlight.com
DATASHEET
IRM-2638T
℃, Vcc=5.0V)
Electro-Optical Characteristics (Ta=25℃
Parameter Symbol Min. Typ. Max. Unit Condition
Current consumption Icc --- 1.0 1.2 mA No input signal
B.P.F Center Frequency Fo --- 38 --- KHz
Supply voltage VCC 4.5 - 5.5 V
Peak wavelength λp --- 940 --- nm
L0 14 --- ---
Reception range m
L45 6 --- --- At the ray axis
φh --- 45 --- deg *2
Half angle(horizontal)
Half angle(vertical) φv --- 45 --- deg
High level pulse width TH 400 --- 800 µs At the ray axis
TL 400 --- 800 µs *3
Low level pulse width
High level output voltage VH 4.5 --- --- V
Low level output voltage VL --- 0.2 0.5 V
2. The ray receiving surface at a vertex and relation to the ray axis in the range of θ=0° and θ=45°.
3. A range from 30cm to the arrival distance. Average value of 50 pulses.
DATASHEET
IRM-2638T
Test method
The specified electro-optical characteristics is satisfied under the following Conditions at the controllable distance.
1. Measurement place
A place that is nothing of extreme light reflected in the room.
2. External light
Project the light of ordinary white fluorescent lamps which are not high
Frequency lamps and must be less then 10 Lux at the module surface.
≦
(Ee 10Lux)
3. Standard transmitter
A transmitter whose output is so adjusted as to Vo=400mVp-p and the output Wave form shown in
Fig.-1.According to the measurement method shown in Fig.-2 the standard transmitter is specified. However, the
infrared photodiode to be used for the transmitter should be λp=940nm,∆λ=50nm. Also, photodiode is used of
PD438B (Vr=5V). (Standard light / Light source temperature 2856°K).
4. Measuring system According to the measuring system shown in Fig.-3
Fig.-1 Transmitter Wave Form D.U.T output Pulse
Fig.-2 standard transmitter calibration
Fig.-2 standard transmitter calibration Fig.-3 Measuring System
DATASHEET
IRM-2638T
Typical Electro-Optical Characteristics Curves
Fig.-4 Relative Spectral Sensitivity vs. Wavelength Fig.-5 Relative Transmission Distance vs. Direction
Fig.-6 Output Pulse Length vs. Arrival Distance Fig.-7 Arrival Distance vs. Supply Voltage
DATASHEET
IRM-2638T
Fig.-8 Relative Transmission Distance vs Fig.-9 Arrival Distance vs. Ambient Temperature
Center Carrier Frequency
20
Transmission Distance Lc (m)

16
12
0
-40 -20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
DATASHEET
IRM-2638T
The Notice of Application:

Transmission of remote control signal consist of four parts: Encode Part, IR Transmitter Source, IRM device, Decode
Part
1. When IRM-2638T code select frequency, it need to well understand the center system of encode part.
2. Strong or weak light of IR Transmitter can affect distance of transmission.
3. When using IRM-2638T device, it requires the composition of code pattern to reach the demand as follows:
Minimum tburst_gap
Minimum tburst
( number of pulses Minimum tpause
( number of pulses per burst)
between two burst)
10 pulses 14 pulses 25 msec
4. It needs to ensure the translation range of decode part if it is applied to the pulse-width range.
If the above items hardly assure of its application, it’ll cause NG(no good) message from the edge
of signal.
DATASHEET
IRM-2638T
Package Dimension
(Dimensions in mm)
Notes:
Tolerances unless dimensions ±0.3mm.
DATASHEET
IRM-2638T
Tapping size
Description Symbol Dimension Tolerance
Component Body Height A 6.95 ±0.3
Component Body Width B 6 ±0.3
Component Body Thickness C 5.60 ±0.3
Component Lead Width d 0.5 ±0.05
Tape Feeding Hole Diameter D 4.0 ±0.2
Lead Pitch F1 / F2 2.54 ±0.2
Feed Hole To Button Of Component H 22 ±0.5
Length From Seating plane H1 20.7 ±0.5
Lead Clinch Height H2 26.25 ±0.5
Body Inclination △h/△P 3 deg ±2.0
Feeding Hold Pitch P1 12.7 ±0.2
Feeding Hold Alignment P2 6.35 ±1.0
Tape Width W1 18.0 ±0.5
Feeding Hold Alignment W2 9.0 ±0.5
Adhesive Tape Width W3 13.1 ±0.5
Adhesive Tape Margin W4 0.5 Min.0
Total Tape Thickness t 0.65 ±0.2
DATASHEET
IRM-2638T
Packing Quantity
2000 pcs / Box

10 Boxes / Carton
Application Restrictions
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for
above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions for use outlined in
these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the
product which does not comply with the absolute maximum ratings and the instructions included in these
specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any form
is prohibited without the specific consent of EVERLIGHT.

Infrared Remote Control Receiver Module IRM-2638T: Features

Uploaded by

Infrared Remote Control Receiver Module IRM-2638T: Features

Uploaded by

Infrared Remote Control Receiver Module

‧ High protection ability against EMI

Parameter Symbol Rating Unit

Supply Voltage Vcc 6 V

Operating Temperature Topr -25 ~ +85 ℃

Parameter Symbol Min. Typ. Max. Unit Condition

Current consumption Icc --- 1.0 1.2 mA No input signal

B.P.F Center Frequency Fo --- 38 --- KHz

Supply voltage VCC 4.5 - 5.5 V

Peak wavelength λp --- 940 --- nm

Half angle(vertical) φv --- 45 --- deg

High level output voltage VH 4.5 --- --- V

Low level output voltage VL --- 0.2 0.5 V

Fig.-1 Transmitter Wave Form D.U.T output Pulse

Fig.-2 standard transmitter calibration

Fig.-2 standard transmitter calibration Fig.-3 Measuring System

Typical Electro-Optical Characteristics Curves

Transmission Distance Lc (m)

The Notice of Application:

10 pulses 14 pulses 25 msec

Description Symbol Dimension Tolerance

Component Body Height A 6.95 ±0.3

Component Body Width B 6 ±0.3

Component Body Thickness C 5.60 ±0.3

Component Lead Width d 0.5 ±0.05

Tape Feeding Hole Diameter D 4.0 ±0.2

Lead Pitch F1 / F2 2.54 ±0.2

Feed Hole To Button Of Component H 22 ±0.5

Length From Seating plane H1 20.7 ±0.5

Lead Clinch Height H2 26.25 ±0.5

Body Inclination △h/△P 3 deg ±2.0

Feeding Hold Pitch P1 12.7 ±0.2

Feeding Hold Alignment P2 6.35 ±1.0

Tape Width W1 18.0 ±0.5

Feeding Hold Alignment W2 9.0 ±0.5

Adhesive Tape Width W3 13.1 ±0.5

Adhesive Tape Margin W4 0.5 Min.0

Total Tape Thickness t 0.65 ±0.2

2000 pcs / Box

You might also like