Programming - Programming QuickStart Box Set - HTML, Javascript & CSS (Programming, HTML, Javascript, CSS, Computer Programming) (PDFDrive)

HTML: QuickStart Guide
Creating an Effective Website

© Copyright 2015 - All rights reserved.
In no way is it legal to reproduce, duplicate, or transmit any part of this document in either electronic
means or in printed format. Recording of this publication is strictly prohibited and any storage of this
document is not allowed unless with written permission from the publisher. All rights reserved.
The information provided herein is stated to be truthful and consistent, in that any liability, in terms of
inattention or otherwise, by any usage or abuse of any policies, processes, or directions contained within is
the solitary and utter responsibility of the recipient reader. Under no circumstances will any legal
responsibility or blame be held against the publisher for any reparation, damages, or monetary loss due to
the information herein, either directly or indirectly.
Respective authors own all copyrights not held by the publisher.
Legal Notice:
This book is copyright protected. This is only for personal use. You cannot amend, distribute, sell, use,
quote or paraphrase any part or the content within this book without the consent of the author or
copyright owner. Legal action will be pursued if this is breached.
Disclaimer Notice:
Please note the information contained within this document is for educational and entertainment purposes
only. Every attempt has been made to provide accurate, up to date and reliable complete information. No
warranties of any kind are expressed or implied. Readers acknowledge that the author is not engaging in
the rendering of legal, financial, medical or professional advice.
By reading this document, the reader agrees that under no circumstances are we responsible for any losses,
direct or indirect, which are incurred as a result of the use of information contained within this document,
including, but not limited to, —errors, omissions, or inaccuracies.
Introduction
Chapter 1: Basic Tags in HTML
Chapter 2: HTML Elements
Chapter 3: Formatting in HTML
Chapter 4: HTML Phrase Tags
Chapter 5: Meta Tags
Chapter 6: Comments
Chapter 7: HTML Images
Chapter 8: HTML Lists
Chapter 9: HTML Colors
Conclusion
Free Bonus!!!
We would like to offer you our FREE Guide to jump start you on a path to improve your life & Exclusive
access to our Breakthrough Book Club!!! It’s a place where we offer a NEW FREE E-book every week! Also
our members are actively discussing, reviewing, and sharing their thoughts on the Book of The Week and on
topics to help each other Breakthrough Life’s Obstacles! With a Chance to win a $25 Gift Card EVERY
Month! Please Enjoy Your FREE Guide & Access to the Breakthrough Book Club
Introduction
HTML or Hyper Text Markup Language is the most commonly used language for developing web pages. It
was created in the year 1991 Berners-Lee. The standard HTML specification, HTML 2.0, was published in
the year 1995. Another major version of this language, HTML 4.01 was released in late 1999. This was the
most widely used version of HTML and it is now replaced by HTML 5, released in the year 2012. This is
basically an extension to its previous version HTML 4.01.
This is for?
This tutorial on HTML is designed specifically for aspiring developers and web designers. This tutorial is
explained in enough detail with practical examples and a simple overview so that it can be easily
understood by beginners and provides enough knowledge to design their own webpages. You can get a
higher level of expertise with some practice.
Prerequisites
The prerequisites for starting this tutorial are that it should have some basic knowledge of working with
Linux operating system or Windows. In addition, you should also be familiar with:
● Using a text editor like editplus, notepad, notepad++ or any other text editor.
● Creating files and directories on your computer.
● Navigation within different directories.
● Different image formats like PNG, JPG, etc.
● Typing content into a file and saving them.
Heading Tags
Heading is the first thing in a document and every document starts with one. In HTML, you can set your
heading in different sizes. There are six sizes of headings and they can be set using the elements <h1>,
<h2>, <h3>, <h4>, <h5>, and <h6>. The browser will add a line before and after the heading while
displaying. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Heading</title>
</head>
<body>
<h1>This will be heading 1</h1>
</body>
</html>
This code will produce the following output:
This will be heading 1

This will be Heading 6
Paragraph Tag
You can structure your content into paragraphs using the <p> tag. For making your text into a paragraph,
you should place it in between the opening tag <p> and closing tag </p>. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Paragraph</title>
</head>
<body>
<p>This text will be the first paragraph.</p>
<p>This text will be the second paragraph.</p>
<p>This text will be the third paragraph.</p>
</body>
</html>
This text will be the first paragraph.
This text will be the second paragraph.
This text will be the third paragraph.
Line Break Tag

If you wish to add a line break in between your text, you can use the <br /> element and any text following
it will start in a new line. Some tags do not need closing tags and such tags are called empty elements. The
<br /> element is one such empty element. They are called so because no content goes in between them.
There is a space between br and / characters and if it is not added, older browsers will fail to render the
line break. If the / is not added and just use <br>, it won't work in XHTML, as it is invalid. Here is an
example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Line Break</title>
</head>
<body>
<p>Hey<br />
How are you doing today?.<br />
Good Luck<br />
Peter</p>
</body>
</html>
Hey
How are you doing today?
Good Luck
Peter
Centering Content
Sometimes you'll need to place your content at the center of the table cell or page. For such cases, you can
use the tag <center>. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Centering the Content</title>
</head>
<body>
<p>This text has the default alignment.</p>
<center>
<p>This text is centered.</p>
</center>
</body>
</html>
This code will produce the following the output:
This text has the default alignment.
This text is centered.
Horizontal Lines
You can visually break up the sections present in a document using the Horizontal lines. The <hr> tag is
used for creating a horizontal line from the left margin to the right margin. This will break the line
accordingly. For instance, if you want to insert a line break in between two paragraphs, you can use the
code given below.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Horizontal Line</title>
</head>
<body>
<p>This is the first paragraph. This is on the top of the line break.</p>
<hr />
<p>This is the second paragraph. This is at the bottom of the line break. </p>
</body>
</html>
The above code will produce the following output:
This is the first paragraph. This is on the top of the line break.
This is the second paragraph. This is at the bottom of the line break.
The <hr /> tag is also categorized as an empty element. This doesn't need opening tags and closing tags as
there is no content going in between.
There is a space in between the characters hr and / in the <hr /> element. If the space is omitted, older
versions of browsers will have problem with the rendering the horizontal line and if the / is missed, it won't
be a valid element in XHTML.
Preserve Formatting
In some cases your text should follow the same format as it is entered in the HTML document. You can
make use of the <pre> tag in such cases. It means preformatted text.
Any text entered into between the tags <pre> and </pre> will have the same text format as seen in the
source document. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Preserve Formatting</title>
</head>
<body>
<pre>
int main(void) {
printf("Hello World!\n");
// return 0;
}
</pre>
</body>
</html>
The above code will produce the following output.
int main(void) {
printf("Hello World!\n");
// return 0;
}
Nonbreaking Spaces
In some cases you do not want your browser to split the words across lines. In such cases you can use the
nonbreaking space entity instead of using the normal space. Have a look at the following example
for a better understanding.
Example
Let us use the words James Bond 007 for our example and we do not want the browser to split these
words. We will add to the nonbreaking space entity instead of space.
<!DOCTYPE html>
<html>
<head>
<title>Example for Nonbreaking Spaces</title>
</head>
<body>
<p>
The agent in the movie is "James Bond 007."</p>
</body>
</html>
An element in his family will be defined by starting tag. If other content can be contained within the
element, it will have a closing tag. For the closing tag, the name of the element will be preceded with a /.
Some of such elements are given below.
Start Tag Content End Tag
<i> This is italic font content </i>
<marquee> This is marquee text </marquee>

content.
<p> This is paragraph </p>

content.
<br />
Here, <i> and </i> is an element, <marquee> and </marquee> is another element. There are a few HTML
elements that doesn't need closing tags, such as <br />, <hr />, <img />, etc. The HTML elements which
doesn't require closing tags are called as void elements.
The HTML document has a tree for these elements and this tree specifies on how the documents of HTML
should be built. It also specifies the type of content that is to be placed in what part of the document.
HTML Tag vs. Element

An element of HTML will be defined using a starting tag. If other content is placed inside it, it will have a
closing tag.
For instance, <i> is the starting tag for italic text and </i> is the closing tag for it. But, <i>This text is
italic</i> is a italic text element.
Nested Elements in HTML

HTML allows you to nest HTML elements within other HTML elements. Here is an example:
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Nested Elements</title>
</head>
<body>
<h2>This is <b>bold</b> heading</h2>
<p>This is <i>italic</i> text</p>
</body>
</html>
The above code will produce the following output
This is bold heading
This is italic text
Attributes
Till now, we have seen some of the tags like paragraph tag <p>, heading tags <h1>, <h2> and a few other
tags in the most simple form. These bags can be given some extra information known as attributes.
The characteristics of an element in HTML can be defined using an attribute. This will be placed inside the
opening tag of the element and they contain two parts, name and value.
● The name of the attribute is nothing but the property that you wish to set. For example, the
font element carries attributes like color, size, type, etc., which are used for indicating the font
color, font size and font type that is to be displayed on the page.
● The value of the attribute is nothing but the value for the property that you wish to set. The
value of an attribute should always be placed inside quotations. The examples below will show you
the values that can be given to the above given name: Red, 3 and Georgia, as font color, size and
type.
You should be careful when using names and values for attributes, as they are case sensitive. However, the
W3C (World Wide Web Consortium), recommends the use of lowercase attributes and attribute values in
their recommendation for HTML 4.
Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Align Attribute Example</title>
</head>
<body>
<p align="right">This content will be aligned to the right</p>
<p align="center">This content will be aligned to the center</p>
<p align="left">This content will be aligned to the left</p>
</body>
</html>
The above code will give us the following output:
This content will be aligned to the right.
This content will be aligned to the center.
This content will be aligned to the left.
Internationalization Attributes
In HTML, there are a total of three internationalization attributes. These are available for most of the
XHTML elements, but not for all.
● dir
● lang
● xml:lang
The dir Attribute
You can specify the text flow direction to the browser by using the dir attribute. This attribute can take two
values, as shown in the table given below.
Value Meaning
ltr Left to right (this will be the default value)
rtl Right to left (for languages such as Hebrew or Arabic that are read right to
left)
Example
<!DOCTYPE html>
<html dir="rtl">
<head>
<title>Display Directions</title>
</head>
<body>
This is how IE 5 renders right-to-left directed text.
</body>
</html>
This is how IE 5 renders right-to-left directed text.
If the dir attribute is placed inside the<html> tag, it will determine how the text of the entire document will
be presented. If this attitude is use the inside another tag, it will just to control the direction of the text
contained in that specific tag.
The lang Attribute

You can indicate the main language that is to be used in your document by using the lang attribute. The
only reason for keeping this attribute is HTML is for the backwards compatibility with previous versions of
HTML. In the new XHTML documents, this attribute is replaced with the xml:lang attribute.
The lang attributes have the values as ISO 639 standard 2-character language codes. You can check the
complete list of language codes with the HTML Language Codes: ISO 639.
Example
<!DOCTYPE html>
<html lang="en">
<head>
<title>English Language Page</title>
</head>
<body>
This page is using English Language
</body>
</html>
The xml:lang Attribute
In XHTML, the xml:lang attribute is used as a replacement for the original lang attribute used in earlier
versions of HTML. As mentioned above, the xml:lang attribute value should be an ISO-639 country code.
Generic Attributes
There are a few other attributes that can be readily used with most of the HTML tags. The list of those
attributes is given in the table below.
Attribute Options Function
align right, left, center Horizontally aligns tags
valign top, middle, bottom Vertically aligns tags within an HTML

element.
bgcolor numeric, hexadecimal, RGB Places a background color behind an

values element
background URL Places a background image behind an

element
id User Defined Names an element for use with

Cascading Style Sheets.
class User Defined Classifies an element for use with

Cascading Style Sheets.
width Numeric Value Specifies the width of tables, images, or

table cells.
height Numeric Value Specifies the height of tables, images, or

table cells.
title User Defined "Pop-up" title of the elements.

If you are familiar with using the word processor, you probably must also be similar with making text bold,
italicized or underlined. There are a total of 10 options available in HTML and XHTML, which will indicate
your text will appear.
Bold Text
Any content that is placed in between <b>...</b> element will be displayed as bold text. Here is an
example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Bold Text</title>
</head>
<body>
<p>The following word will be in a <b>bold</b> typeface.</p>
</body>
</html>
The following word will be in a bold typeface.
Italic Text
Any content that is placed in between <i>...</i> element will be displayed as italicized text. Here is an
example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Italic Text</title>
</head>
<body>
<p>The following word will be in a <i>italicized</i> typeface.</p>
</body>
</html>
The following word will be in an italicized typeface.
Underlined Text
Any content that is placed in between <u>...</u> element will be displayed as underlined text. Here is an
example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Underlined Text</title>
</head>
<body>
<p>The following word will be in an <u>underlined</u> typeface.</p>
</body>
</html>
The following word will be in an underlined typeface.
Strike Text
Any content that is placed in between <strike>...</strike> element will be displayed as struck text, is a thin
line through the text. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Strike Text Example</title>
</head>
<body>
<p>The following word uses a <strike>strikethrough</strike> typeface.</p>
</body>
</html>
The following word uses a strikethrough typeface.
Monospaced Font
Any content placed in between the <tt>...</tt> element will be displayed as monospaced font. Most of the
available fonts are variable width fonts. This is because different letters have different widths. For instance
the letter w is wider than i. With a monospaced font, every letter will have the same width. Here is an
example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Monospaced Font</title>
</head>
<body>
<p>The following word uses a <tt>monospaced</tt> typeface.</p>
</body>
</html>
The following word uses a monospaced typeface .
Superscript Text
You can use the <sup>...</sup> element for adding a superscript on your web page. A superscript is
nothing but the text with the same font with the same font size as the text surrounding it, but it will be
displayed half a character's height above the surrounding text. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Superscript Text</title>
</head>
<body>
<p>The following word uses a <sup>superscript</sup> typeface.</p>
</body>
</html>
The following word uses a superscript typeface.
Subscript Text
You can use the <sub>...</sub> element for adding a subscript on your web page. A subscript is nothing but
the text with the same font with the same font size as the text surrounding it, but it will be displayed half a
character's height below the surrounding text. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Subscript Text</title>
</head>
<body>
<p>The following word uses a <sub>subscript</sub> typeface.</p>
</body>
</html>
The following word uses a subscript typeface.
Inserted Text
Any text that is placed in between the <ins>...</ins> element will be shown as inserted text. Here is an
example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Inserted Text</title>
</head>
<body>
<p>I want to drink <del>cola</del> <ins>wine</ins></p>
</body>
</html>
I want to drink cola wine
Deleted Text
Any text that is placed in between the <del>...</del> element will be shown as deleted text. Here is an
example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Deleted Text</title>
</head>
<body>
<p>I want to drink <del>cola</del> <ins>wine</ins></p>
</body>
</html>
I want to drink wine
Larger Text
Any content placed inside the element <big>...</big> will be displayed as a one size larger font than the
rest of the content surrounding it. Here is an example explaining larger text.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Larger Text</title>
</head>
<body>
<p>You can add<big>larger</big> text in middle of a sentence using this.</p>
</body>
</html>
This above code will produce the following output:
You can add larger text in middle of a sentence using this.
Smaller Text
Any content placed inside the element <small>...</small> will be displayed as a one size smaller font than
the rest of the content surrounding it. Here is an example explaining smaller text.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Smaller Text</title>
</head>
<body>
<p> You can add <small>smaller</small> text in middle of a sentence using this.</p>
</body>
</html>
This above code will produce the following output:
You can add smaller text in middle of a sentence using this.
Grouping Content
You can use the elements <div> and <span> for grouping several elements together for creating sections or
subsections in a page. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Div Tag</title>
</head>
<body>
<div id="menu" align="middle" >
<a href="/index.htm">HOME</a> |
<a href="/about/contact_us.htm">CONTACT</a> |
<a href="/about/index.htm">ABOUT</a>
</div>
<div id="content" align="left" bgcolor="white">

<h4>Some Content</h4>
<p>The content will go here.....</p>
</div>
</body>
</html>
This will produce the following output:
HOME | CONTACT | ABOUT
SOME CONTENT
The content will go here.....
On the other hand, the <span> element can only be used for grouping inline elements. In cases where you
need to group a part of a paragraph or a sentence together, you can make use of the <span> element. Here
is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Span Tag</title>
</head>
<body>
<p>This is the example of <span style="color:green">span tag</span> and the <span style="color:red">div
tag</span> along with CSS</p>
</body>
</html>
The above code will produce the following output.
This is the example of span tag and the div tag along with CSS
The above tags are used alongside CSS, which allow you to attach a style to a particular section of a page.
The phrase tags in HTML are designed for performing specific purposes. They look similar to other tags like
<b>, <i>, <pre>, and <tt>, which we have already seen in our previous chapters. In this chapter we will go
through the important phrase tags in HTML.
Emphasized Text
Any content that is placed in between the <em>...</em> element will be shown as emphasized text. Here
is an example.
Example:
<!DOCTYPE html>
<html>
<head>
<title>Example for Emphasized Text</title>
</head>
<body>
<p>The following word uses a <em>emphasized</em> typeface.</p>
</body>
</html>
The following word uses an emphasized typeface.
Marked Text
Any content that is placed in between the <mark>...</mark> element will be shown as marked text, with a
yellow link. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Marked Text Example</title>
</head>
<body>
<p>The following word has been <mark>marked</mark> with yellow</p>
</body>
</html>
The following word has been marked with yellow.
Strong Text
Any content that is placed in between the <strong>...</strong> element will be shown as important text.
Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Strong Text Example</title>
</head>
<body>
<p>The following word uses a <strong>strong</strong> typeface.</p>
</body>
</html>
The following word uses a strong typeface.
Text Abbreviation
In HTML, you are allowed to abbreviate your text. You can do it by placing the text inside the opening
<abbr> and closing</abbr> tags. The full description should be added in the title attribute and nothing else,
if present. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Text Abbreviation</title>
</head>
<body>
<p>My best friend's name is <abbr title="Abigail">Abi</abbr>.</p>
</body>
</html>
My best friend's name is Abi.
Acronym Element
You can indicate your text as an acronym in HTML by using the<acronym> element. You should place your
text in between the opening tag <acronym> and closing tag </acronym> for indicating it as an acronym.
Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Acronym Example</title>
</head>
<body>
<p>This chapter covers marking up text in <acronym>XHTML</acronym>.</p>
</body>
</html>
This chapter covers marking up text in XHTML.
Text Direction
The element <bdo>...</bdo> stands for Bi-Directional Override. You can override the text direction using
this element. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Text Direction</title>
</head>
<body>
<p>This text goes from left to right.</p>
<p><bdo dir="rtl">This text goes from right to left.</bdo></p>
</body>
</html>
This text goes from left to right.
This text goes from right to left.
Special Terms
You can introduce special terms on your web page on for doing it; you can use the element <dfn>...</dfn>.
This is very much similar to italicized text in the middle of a paragraph.
You would typically use the element <dfn> when you introduce a key term for the first time. The recent
browsers will render the text of the <dfn> element in and italicized format. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Special Terms Example</title>
</head>
<body>
<p>The following word is a <dfn>special</dfn> term.</p>
</body>
</html>
The following word is a special term.
Quoting Text
In HTML, you can quote a passage from a different source. For doing it, you should place the content in
between the opening tag <blockquote> and closing tag </blockquote>.
Any text placed inside this element will usually be intended from left and right edges of the text surrounding
it. Sometimes it uses italicized font. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Blockquote Example</title>
</head>
<body>
<p>The following description of XHTML is taken from the W3C Web site:</p>
<blockquote>XHTML 1.0 is the W3C's first Recommendation for XHTML, following on from earlier work on
HTML 4.01, HTML 4.0, HTML 3.2 and HTML 2.0.</blockquote>
</body>
</html>
The following description of XHTML is taken from the W3C Web site:
XHTML 1.0 is the W3C's first Recommendation for XHTML, following on from earlier work on HTML 4.01,
HTML 4.0, HTML 3.2 and HTML 2.0.
Short Quotations
You can add double quotes inside a sentence by using the <q>...</q> element. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Double Quote</title>
</head>
<body>
<p>Paul is in Spain, <q>I think I am right</q>.</p>
</body>
</html>
Paul is in Spain, I think I am right.
Text Citations
When you are quoting some text, by placing the source between the opening and closing tags <cite>
</cite>, you can indicate the source. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Citations</title>
</head>
<body>
<p>This HTML tutorial is derived from <cite>W3 Standard for HTML</cite>.</p>
</body>
</html>
This HTML tutorial is derived from W3 Standard for HTML.
Computer Code
If you are adding any programming code to your web page, you should place it inside the opening tag
<code> and closing tag </code>. The content placed inside this element will usually be presented in the
monospaced font, like any other called in other programming books. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example Computer Code</title>
</head>
<body>
<p>This is regular text. <code>This is code.</code> This is regular text.</p>
</body>
</html>
This is regular text. This is code . This is regular text.
Keyboard Text
In some situations, you will need your reader to type text using his keyboard. In such situations you can
make use of the element <kbd>...</kbd>. This element will indicate a text that is to be typed. Here is an
example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Keyboard Text</title>
</head>
<body>
<p>Regular text. <kbd>This is inside kbd element</kbd> Regular text.</p>
</body>
</html>
Regular text. This is inside kbd element Regular text.
Programming Variables
Usually, this element will be used along with the elements <code> and <pre> for indicating that the content
placed inside this element is variable. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example Variable Text</title>
</head>
<body>
<p><code>document.write("<var>user-id</var>")</code></p>
</body>
</html>
document.write("user-id")
Program Output
The sample output of a program can be indicated using the element <samp>...</samp>. Script can also be
indicated using this. However, it is usually used for documenting coding concepts or programming. Here is
an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example Program Output</title>
</head>
<body>
<p>The result of the program is <samp>Hello World!</samp></p>
</body>
</html>
The result of the program is Hello World!
Address Text
You can give the address using the <address>...</address> element. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Address</title>
</head>
<body>
<address>1719 c, David Drive, Marietta, Atlanta, Georgia </address>
</body>
</html>
1719 c, David Drive, Marietta, Atlanta, Georgia
In HTML, you are allowed to specifying metadata, which is the additional important information regarding
the document, in different ways. You can use the META elements for including name/value pairs for
describing the properties of the document, such as document author, author, expiry date, the list of
keywords, etc.,
Such additional information can be provided using the <meta> tag. There are no closing tags for the Meta
tag and hence it is an empty element. Though it is an empty element, but the information can be passed
through its attributes.
In general, you can add more than one meta tags to your document, basing on the information that you are
adding to your document. The physical appearance of your document will not have any effect because of
meta tags. From the application point of view, it doesn't matter if meta tags are included or not.
Adding Meta Tags to Your Documents

You can provide a Meta data to your pages by adding <meta> tags within The document’s header,
represented by the tags <head> and </head>. In addition to their core attributes, they can have the
following attributes:
Attribute Description
Name Name for the property. Can be anything. Examples include, keywords,
description, author, revised, generator etc.
content Specifies the property's value.
scheme Specifies a scheme to interpret the property's value (as declared in the
content attribute).
http-equiv Used for http response message headers. For example http-equiv can
be used to refresh the page or to set a cookie. Values include content-
type, expires, refresh and set-cookie.
Specifying Keywords
Important keywords that are related to the document can be specified using <meta> tag. These keywords
will be later used by various search engines. They will also be used for indexing your page for search. Here
is an example.
Example
In the below example, we will add the words Ducati, Aprilia and BMW as the important keywords related to
the document.
<!DOCTYPE html>
<html>
<head>
<title>Meta Tags Example</title>
<meta name="keywords" content="Ducati, Aprilia, BMW" />
</head>
<body>
<p>Hello World!</p>
</body>
</html>
Hello World!
Document Description
You can provide a short description of your document by using <meta> tags. Similar to keywords, the
subscription will also be used by search engines while indexing the web page for searching purposes. Here is
an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Example for Meta Tags</title>
<meta name="description" content="Learning about Meta Tags." />
</head>
<body>
<p>Hello World!</p>
</body>
</html>
Document Revision Date

The <meta> tag can be used for providing information regarding the last updation of the document.
Various web browsers use this information while refreshing your web page. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<meta name="revised" content="Topgear, 7/7/15" />
</head>
<body>
<p>Hello HTML5!</p>
</body>
</html>
Document Refreshing
You can use the <meta> tag for specifying the duration on when to auto refresh your page. Here is an
example.
Example
If you wish to make your web page refreshed automatically for every 10 seconds, use the below syntax.
Syntax:
<!DOCTYPE html>
<html>
<head>
<meta http-equiv="refresh" content="10" />
</head>
<body>
<p>Hello HTML5!</p>
</body>
</html>
Page Redirection
Using <meta> tag, you can redirect your web page to other web pages. You can actually specify the
duration when you want to redirect the page by specifying the number of seconds. Here is an example.
Example
In the following example, the current page will be redirected to another page after 10 seconds. If you leave
the content attribute unspecified, the current web page will be redirected immediately.
<!DOCTYPE html>
<html>
<head>
<meta http-equiv="refresh" content="5; url=http://www.topgear.com" />
</head>
<body>
<p>Hello HTML5!</p>
</body>
</html>
Setting Cookies
Cookies are nothing but a data that is stored on your computer in the form of small text files. Cookies are
exchanged between the web server and the web browser for keeping track on the information that the
web application needs.
Using <meta> tag, the cookies can be stored on the client side and of this information can be later used by
the web server for tracking the visitor of its site.
Example
In the following example, the current page will be redirected to another page after 10 seconds. If you leave
the content attribute unspecified, the current web page will be redirected immediately.
<!DOCTYPE html>
<html>
<head>
<meta name="revised" content="Topgear, 7/Jul/15" />
<meta http-equiv="cookie" content="userid=xyz; expires=Wednesday, 08-Aug-15 23:59:59 GMT;" />
</head>
<body>
<p>Hello HTML5!</p>
</body>
</html>
If the expiration date and time are not included, the cookie will then be considered as a session cooking.
Session cookies will be deleted when the browser is closed.
Setting Author Name

You can set an author name in a web page using meta tag. See an example below:
Example
<!DOCTYPE html>
<html>
<head>
<meta name="author" content="Mahnaz Mohtashim" />
</head>
<body>
<p>Hello HTML5!</p>
</body>
</html>
Specify Character Set

You can use <meta> tag to specify character set used within the webpage.
Example
By default, Web servers and Web browsers use ISO-8859-1 (Latin1) encoding to process Web pages.
Following is an example to set UTF-8 encoding:
<!DOCTYPE html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
</head>
<body>
<p>Hello HTML5!</p>
</body>
</html>
To serve the static page with traditional Chinese characters, the webpage must contain a <meta> tag to set
Big5 encoding:
<!DOCTYPE html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=Big5" />
</head>
<body>
<p>Hello HTML5!</p>
</body>
</html>
Chapter 6: Comments
Comments are nothing but pieces of code that are ignored by web browser. Adding comments to the HTML
code is a very good practice, especially for complex documents. Comments indicate different sections of a
document. They can also be used for indicating other notes to other persons looking at the code. By
increasing the code readability, comments help users to understand code easily.
For adding a comment in HTML, you need to place the content in between the tags . Any content
that is placed inside these tags will be considered as comments and the browser will completely ignore
them. Here is an example
Example
<!DOCTYPE html>
<html>
<head> 
<title>This is document title</title>
</head> 
<body>
<p>The content of the document goes here.....</p>
</body>
</html>
This code will produce the output which displays the content placed inside the paragraph tag but it will hide
the content placed inside the comment tags.
The content of the document goes here…..
Valid vs. Invalid Comments

Comments cannot be nested; this means that you cannot place a comment inside another comment. You
should always ensure that there are no spaces given at the start of the comment string. The ‘--’ (double
dash sequence) may not appear within a comments except in the closing tag (-->). Here is an example.
Example
In this example, we will give a valid comment and it will be ignored by the browser.
<!DOCTYPE html>
<html>
<head>
<title>Example for Comment</title>
</head>
<body>

</body>
</html>
The content of the document goes here…..
The following example will have an invalid comment. Browsers do not hide invalid comments and they
display them as content. We will add an extra space in between the opening < and !.
<!DOCTYPE html>
<html>
<head>
<title>Example for Invalid Comment</title>
</head>
<body>
< !-- This comment is not a valid one -->
</body>
</html>
< !-- This comment is not a valid one -->
The content of the document goes here.....
Multiline Comments
So far, we have only discussed about single line comments. However, HTML also supports the multi-line
comments.
You can increase the code readability by adding comments in multiple lines by using a special beginning and
ending tags  that are placed in front of the first line and after the last line as given in the
example shown below.
Example
<!DOCTYPE html><html>
<head>
<title>Multiline Comments</title>
</head>
<body>

</body>
</html>
The content of the document goes here.....
Conditional Comments
The conditional comments do not work on any other browser other than Internet Explorer. Other browsers
ignore conditional comments. The support for conditional comments started from Internet Explorer 5.
They can be used for giving conditional instructions for different Internet Explorer versions. Here is an
example.
Example
<head>
<title>Example for Conditional Comments</title>

</head>
<body>
</body>
</html>
Conditional comments can be helpful in situations where you will need to use different style sheets,
depending on the version of IE.
Using Comment Tag

A part of the HTML code can be made as a comment and there are a few browsers supporting the
<comment> tag. Here is an example.
Example
<head>
<title>Using Comment Tag</title>
</head>
<body>
<p>This is <comment>not</comment> Internet Explorer.</p>
</body>
</html>
The above code will produce the following output if you're using IE:
This is Internet Explorer.
The above code will produce the following output if you're using a different browser other than IE:
This is not Internet Explorer.
Commenting Script Code

In cases where you are using VBScript or JavaScript with your HTML code, it is wise to place the script code
inside proper comments. This will make sure that they can be used with older browsers. Here is an
example.
Example
<head>
<title>Commenting Script Code</title>
<script>

</script>
</head>
<body>
<p>Hakuna, Matata!</p>
</body>
</html>
Hakuna Matata!
Hakuna, Matata!
Commenting Style Sheets

In cases where you are using style sheets with your HTML code, it is wise to place the style sheet code
inside proper comments. This will make sure that they can be used with older browsers. We will learn
about style sheets in a different chapter. Here is an example.
Example
<head>
<title>Commenting Style Sheets</title>
<style>

</style>
</head>
<body>
<div class="example">Good, Morning!</div>
</body>
</html>
Good, Morning!
Images can be very helpful to beautify and to explain the complex concepts of your web page in a simple
way. In this chapter, we will add images to your webpages in simple steps.
Insert Image
In HTML, you can add any image to your web page with the <img> tag. The syntax for using the <img> tag
is given below.
Syntax:
<img src="Image URL" ... attributes-list/>
The <img> tag is an empty one, it means that there will be no closing tag for it. You can only give the list of
attributes to this tag. Here is an example.
Example
For trying the below example, you need to keep the .htm file and the image within the same directory.
<!DOCTYPE html>
<html>
<head>
<title>Using Image in Webpage</title>
</head>
<body>
<p>Simple Image Insert</p>
<img src="/html/images/test.png" alt="Test Image" />
</body>
</html>
The above code will produce an output with the image used.
Simple Image Insert
HTML supports image formats like JPEG, PNG or GIF. You can use any of these image formats basing on
your comfort. You should always ensure that you specify the correct file name of the image in src
attribute. Always remember that the image names are case sensitive.
There is a mandatory attribute called the alt attribute, which will specify an alternate text for the image, in
cases where the image fails to be displayed.
Set Image Location

It is recommended that you keep your images in a specific directory separately. We will put our .htm file in
the home directory and the images in a subdirectory called images, within the home directory. Here is an
example.
Example
Here, we will assume the image location to be "/html/image/test.png", for this example.
<!DOCTYPE html>
<html>
<head>
<title>Using Image in Webpage</title>
</head>
<body>
<p>Simple Image Insert</p>
<img src="/html/images/test.png" alt="Test Image" />
</body>
</html>
The above code will produce an output with the specified image.
Set Image Width/Height

Depending on your requirements, you can set the height and width of an image with the help of the height
and width attributes. The height and width for the image can either be specified in terms of its percentage
with its actual size or in terms of pixels. Not that the original resolution of the image will change if the
ratios are not maintained. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Set Image Width and Height</title>
</head>
<body>
<p>Setting image width and height</p>
<img src="/html/images/test.png" alt="Test Image" width="200" height="150"/>
</body>
</html>
The above code will produce an output image with the width 200 and height 150.
Set Image Border

Every image by default will have a border surrounding it. You can specify the thickness of the border using
the border attribute, in terms of pixels. If you wish to remove the border around your image, you should
set the thickness to 0. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Set Image Border</title>
</head>
<body>
<p>Setting image Border</p>
<img src="/html/images/test.png" alt="Test Image" border="3"/>
</body>
</html>
The above code will produce an output with the border 3.
Set Image Alignment
All the images, by default, will be aligned to the left. You can specify the alignment of the image using the
align attribute to set the image to the right or center. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>Set Image Alignment</title>
</head>
<body>
<p>Setting image Alignment</p>
<img src="/html/images/test.png" alt="Test Image" border="3" align="right"/>
</body>
</html>
The above code will produce an output image aligned to the right, with a border 3.
In HTML, information can be specified using three types of lists. A list must contain at least one list
element. Lists contain:
<ul> - This is an unordered list. The list items will be listed using plain bullets.
<ol> - This is an ordered list. The list items in this list will be listed with different schemes of numbers.
<dl> - This is a definition list. The items in the definition list will be arranged in the same way as they are in
a dictionary.
HTML Unordered Lists
And unordered list can be defined as a collection of items with no special sequence or order. You can
create this list by using the <ul> tag. All the items in this list will be marked using bullets. Here is an
example.
Example
<!DOCTYPE html>
<html>
<head>
<title>HTML Unordered List</title>
</head>
<body>
<ul>
<li>Apple</li>
<li>Mango</li>
<li>Banana</li>
<li>Pear</li>
</ul>
</body>
</html>
Apple
Mango
Banana
Pear
The type Attribute

You can actually specify the type of bullet to be used by using the type attribute of the <ul> tag. The
default a bullet time is a disc. The other possible options are:
<ul type="disc">
<ul type="square">
<ul type="circle">
Example
Following is an example where we used <ul type="square">
<!DOCTYPE html>
<html>
<head>
</head>
<body>
<ul type="square">
<li>Apple</li>
<li>Mango</li>
<li>Banana</li>
<li>Pear</li>
</ul>
</body>
</html>
Apple
Mango
Banana
Pear
Example
Following is an example where we used <ul type="disc"> :
<!DOCTYPE html>
<html>
<head>
</head>
<body>
<ul type="disc">
<li>Apple</li>
<li>Mango</li>
<li>Banana</li>
<li>Pear</li>
</ul>
</body>
</html>
Apple
Mango
Banana
Pear
Example
Following is an example where we used <ul type="circle"> :
<!DOCTYPE html>
<html>
<head>
</head>
<body>
<ul type="circle">
<li>Apple</li>
<li>Mango</li>
<li>Banana</li>
<li>Pear</li>
</ul>
</body>
</html>
Apple
Mango
Banana
Pear
HTML Ordered Lists
You can use the order list in HTML when you are required to place the list items in a numbered list, instead
of using the regular bulleted list. You can place the items in an ordered list by using the <ol> tag. The
number in for an ordered list starts with 1 and it will be incremented by 1 with each element added to this
list using <li>. Here is an example.
Example
<!DOCTYPE html>
<html>
<head>
<title>HTML Ordered List</title>
</head>
<body>
<ol>
<li>Apple</li>
<li>Mango</li>
<li>Banana</li>
<li>Pear</li>
</ol>
</body>
</html>
Apple
Mango
Banana
Pear
The type Attribute

You can specify the numbering type you like by using the type attribute of the <ol> tag. The number will be
the default numbering type. The other possible options are the following:
<ol type="A"> - Upper-Case Letters.
<ol type="a"> - Lower-Case Letters.
<ol type="I"> - Upper-Case Numerals.
<ol type="i"> - Lowercase Numerals.
<ol type="1"> - Default-Case Numerals.
Example
We will use the <ol type="1"> for this example.
<!DOCTYPE html>
<html>
<head>
</head>
<body>
<ol type="1">
<li>Apple</li>
<li>Mango</li>
<li>Banana</li>
<li>Pear</li>
</ol>
</body>
</html>
Apple
Mango
Banana
Pear
Example
We will use the <ol type="I"> for this example.
<!DOCTYPE html>
<html>
<head>
</head>
<body>
<ol type="I">
<li>Apple</li>
<li>Mango</li>
<li>Banana</li>
<li>Pear</li>
</ol>
</body>
</html>
Apple
Mango
Banana
Pear
Example
We will use the <ol type="i"> for this example.
<!DOCTYPE html>
<html>
<head>
</head>
<body>
<ol type="i">
<li>Apple</li>
<li>Mango</li>
<li>Banana</li>
<li>Pear</li>
</ol>
</body>
</html>
Apple
Mango
Banana
Pear
Example
We will use the <ol type="A"> for this example.
<!DOCTYPE html>
<html>
<head>
</head>
<body>
<ol type="A">
<li>Apple</li>
<li>Mango</li>
<li>Banana</li>
<li>Pear</li>
</ol>
</body>
</html>
Apple
Mango
Banana
Pear
Example
We will use the <ol type="a"> for this example.
<!DOCTYPE html>
<html>
<head>
</head>
<body>
<ol type="a">
<li>Apple</li>
<li>Mango</li>
<li>Banana</li>
<li>Pear</li>
</ol>
</body>
</html>
Apple
Mango
Banana
Pear
The start Attribute

You can specify the starting point with a specific number to start a list with the help of the start attribute of
the <ol> tag. The other possible options the following (we will start at the numbering with 3).
<ol type="1" start="3"> - Numerals starts with 3
<ol type="a" start="3"> - Letters starts with c
<ol type="A" start="3"> - Letters starts with C
<ol type="i" start="3"> - Numerals starts with iii
<ol type="I" start="3"> - Numerals starts with III
Example
Following is an example where we used <ol type="i" start="3" >
<!DOCTYPE html>
<html>
<head>
</head>
<body>
<ol type="i" start="3">
<li>Apple</li>
<li>Mango</li>
<li>Banana</li>
<li>Pear</li>
</ol>
</body>
</html>
Apple
Mango
Banana
Pear
HTML Definition Lists

XHTML an HDMI support a list style called the definition list. Here are the entities will be listed like as they
are in a encyclopaedia or dictionary. Using the definition list is ideal for representing a list of items,
glossary, or other value/name lists.
The given tags will be used by the definition list.
<dl> - Defines the start of the list
<dt> - A term
<dd> - Term definition
</dl> - Defines the end of the list
Here is an example using <dt>

Example
<!DOCTYPE html>
<html>
<head>
<title>HTML Definition List</title>
</head>
<body>
<dl>
<dt><b>HTML</b></dt>
<dd>This stands for Hyper Text Markup Language</dd>
<dt><b>HTTP</b></dt>
<dd>This stands for Hyper Text Transfer Protocol</dd>
</dl>
</body>
</html>
HTML
This stands for Hyper Text Markup Language
HTTP
This stands for Hyper Text Transfer Protocol
Colors play a very important role in beautifying your web page, making it good to look and feel it. On the
page level, you can specify the colors by using the <body> tag. You can also use the bgcolor attribute for
setting the colors what different tags.
The following attributes are available with the <body> tag, with which different colors can be set.
vlink - This will set the color for the links that are visited (links clicked once or more)
link - The color of the linked text can be set using this.
alink - The color for the selected links or active links can be set using this.
text - The body text color can be set with this.
bgcolor - The color of the background can be set with this.
HTML Color Coding Methods

There are three different methods in HTML for setting setting colors for the web page. They are as follows:
Color names - you can directly specify the names of the colors like red, blue or green.
Hex codes - You can specify the color using a six digit hex code. Every color can be represented by the red,
blue and green colors present in them. The hex code is nothing but a representation of this.
Color decimal or percentage values - This value will be specified by using the rgb( ) property.
Now we will have a look at these coloring schemes in detail.
HTML Colors - Color Names

You can directly specify the name of the color for setting it as the background or text color. There are a
total of 16 basic colors listed by W3C, that validate with the HTML validator. Most of the major browsers
support more than 200 different colors.
W3C Standard 16 Colors
The list of 16 standard colors, recommended by W3C is given below.
Black Gray Silver White

Yellow Lime Aqua Fuchsia
Red Green Blue Purple
Maroon Olive Navy Teal
Example
Here is an example where we said to the background color using the color name.
<!DOCTYPE html>
<html>
<head>
<title>HTML Colors by Name</title>
</head>
<body text="blue" bgcolor="green">
<p>Use different color names for for body and table and see the result.</p>
<table bgcolor="black">
<tr>
<td>
<font color="white">This text will appear white on black background.</font>
</td>
</tr>
</table>
</body>
</html>
HTML Colors - Hex Codes

The hex code is nothing but the six digit the presentation for a color. The first two digits of the hex code
represent the value of red, the next two digits represented the value of green and the last two digits
represented the value of blue. The hex code will be RRGGBB.
You can take the hexadecimal value from graphics software like MS paint, Paintshop Pro or Adobe
Photoshop.
A hash sign # or pound will precede the hexadecimal code. Given below is a table with the colors using hex
code.
Color Color
HEX
#000000
#FF0000
#00FF00
#0000FF
#FFFF00
#00FFFF
#FF00FF
#C0C0C0
#FFFFFF
Example
Here are the examples to set background of an HTML tag by color code in hexadecimal:
<!DOCTYPE html>
<html>
<head>
<title>HTML Colors by Hex</title>
</head>
<body text="#0000FF" bgcolor="#00FF00">
<p>Use different color hex for for body and table and see the result.</p>
<table bgcolor="#000000">
<tr>
<td>
<font color="#FFFFFF">This text will appear white on black background.</font>
</td>
</tr>
</table>
</body>
</html>
HTML Colors - RGB Values

The color value can be specified with the rgb( ) property. This takes 3 values as the input for the colors red,
green and blue, respectively. The range of each color varies from integer values 0 to 255 or as a
percentage.
The list of the RGB values for few colors is given below.
Color Color RGB

rgb(0,0,0)
rgb(255,0,0)
rgb(0,255,0)
rgb(0,0,255)
rgb(255,255,0)
rgb(0,255,255)
rgb(255,0,255)
rgb(192,192,192)
rgb(255,255,255)
Example
Here are the examples to set background of an HTML tag by color code using rgb() values:
<!DOCTYPE html>
<html>
<head>
<title>HTML Colors by RGB code</title>
</head>
<body text="rgb(0,0,255)" bgcolor="rgb(0,255,0)">
<p>Use different color code for for body and table and see the result.</p>
<table bgcolor="rgb(0,0,0)">
<tr>
<td>
<font color="rgb(255,255,255)">This text will appear white on black background.</font>
</td>
</tr>
</table>
</body>
</html>
Note: Not all browsers support the rgb() color property. You should be careful on its usage for this reason.
Browser Safe Colors

There are a total of 216 colors that are supposed to be browser safe. They are computer independent
colors. These colors range from the 000000 to FFFFFF in hex code. All computers having the 256 color
palette support these.
000000 000033 000066 000099 0000CC 0000FF

003300 003333 003366 003399 0033CC 0033FF
006600 006633 006666 006699 0066CC 0066FF
009900 009933 009966 009999 0099CC 0099FF
00CC00 00CC33 00CC66 00CC99 00CCCC 00CCFF
00FF00 00FF33 00FF66 00FF99 00FFCC 00FFFF
330000 330033 330066 330099 3300CC 3300FF
333300 333333 333366 333399 3333CC 3333FF
336600 336633 336666 336699 3366CC 3366FF
339900 339933 339966 339999 3399CC 3399FF
660000 660033 660066 660099 6600CC 6600FF
663300 663333 663366 663399 6633CC 6633FF
666600 666633 666666 666699 6666CC 6666FF
669900 669933 669966 669999 6699CC 6699FF
990000 990033 990066 990099 9900CC 9900FF
993300 993333 993366 993399 9933CC 9933FF
996600 996633 996666 996699 9966CC 9966FF
999900 999933 999966 999999 9999CC 9999FF
CC0000 CC0033 CC0066 CC0099 CC00CC CC00FF
CCCC00 CCCC33 CCCC66 CCCC99 CCCCCC CCCCFF
CCFF00 CCFF33 CCFF66 CCFF99 CCFFCC CCFFFF
FF0000 FF0033 FF0066 FF0099 FF00CC FF00FF
FFCC00 FFCC33 FFCC66 FFCC99 FFCCCC FFCCFF
FFFF00 FFFF33 FFFF66 FFFF99 FFFFCC FFFFFF
Conclusion
Creating a webpage is something that has been wreathed in mysticism and cyber mumbo jumbo for years,
but I hope that I’ve shown you that it’s not as scary as you might think. In fact, HTML is actually fairly
straight forward. IF you’re looking for a hobby that can really accomplish something and is easy to explain,
then you’ve come to the right place. These are the foundations upon which you can build your webpage
and push on to greater things like CSS, Java, JavaScript, C++, and the list goes on and on. Remember, that
you can never really get in over your head if you master and truly understand what it is that you’re working
on in the moment.
If something doesn’t make sense to you or is confusing, my best suggestion to you is to open up your
TextEdit or Notepad and start working on it. Pull it up in your browser and have a look at what it does for
your page. Taking everything step by step will inevitably lead you to the path of success. There is never a
reason to jump ahead without fully understanding what it is that you’ve done.
If you ever find yourself having a need to get back to the basics or you just don’t remember how to do
something simple, come back to this book and have a look at the fundamentals. With everything that I
have presented to you in this book, you should be able to get the grasp on the beginnings of a webpage and
if you can get the beginning, it’s just a matter of taking the next step piece by piece. So good luck and get
out there and make an amazing webpage.
Thank you for Reading! I Need Your Help…

Dear Reader,
I Hope you Enjoyed “HTML: Quick Start Guide Creating an Effective Website”. I have to tell you, as an Author, I love feedback! I am
always seeking ways to improve my current books and make the next ones better. It’s readers like you who have the biggest impact on a
book's success and development! So, tell me what you liked, what you loved, and even what you hated. I would love to hear from you, and I
would like to ask you a favor, if you are so inclined, would you please share a minute to review my book. Loved it, Hated it - I’d just enjoy
your feedback. As you May have gleaned from my books, reviews can be tough to come by these days and You the reader have the power
make or break the success of a book. If you’d be so kind to CLICK HERE to review the book, I would greatly appreciate it! Thank you so much
again for reading “HTML: Quick Start Guide Creating an Effective Website” and for spending time with me! I will see you in the next one!
Check Out More From The Publisher…

Social Media: Master Social Media Marketing - Facebook, Twitter, YouTube & Instagram
by Grant Kennedy
http://www.amazon.com/Social-Media-Marketing-Facebook-Instagram-ebook/dp/B018Y68SWS
Survival: The Survival Guide for Preppers, Make Yourself Ready Through Hunting, Fishing, Canning, and Foraging
by Jack Campbell
http://www.amazon.com/Survival-Preppers-Permaculture-Bushcraft-Hydroponics-ebook/dp/B01573FBP8
Krav Maga: Dominating Solutions to Real World Violence
by George Silva
http://www.amazon.com/Krav-Maga-Dominating-Solutions-Violence-ebook/dp/B01A2BL6CW
Day Trading: Dominate The Market - Stocks, Options, & Forex
by Warrick Liversedge
http://www.amazon.com/Day-Trading-Dominate-Options-Covered-ebook/dp/B01A3LJCMM
SEO: Marketing Strategies to Dominate the First Page
by Grant Kennedy
http://www.amazon.com/SEO-Marketing-Strategies-analytics-optimization-ebook/dp/B01ACB7LQM
JavaScript:
Quick start Guide – Effective JavaScript Programming

Legal Notice:
Disclaimer Notice:
Introduction
Chapter 1: Introduction to JavaScript Programming
Chapter 2: JavaScript - Specifications and Features
Chapter 3: JavaScript – Syntax
Chapter 4: Enabling and Disabling JavaScript in your Web Browser
Chapter 5: JavaScript Data Types
Chapter 6: Operators
Chapter 7: Case Statements and Loops
Conclusion
Free Bonus!!!
We would like to offer you our FREE Guide to jump start you on a path to improve your life & Exclusive
access to our Breakthrough Book Club!!! It’s a place where we offer a NEW FREE E-book every week! Also
our members are actively discussing, reviewing, and sharing their thoughts on the Book of The Week and on
topics to help each other Breakthrough Life’s Obstacles! Please Enjoy Your FREE Guide & Access to the
Breakthrough Book Club
https://publishfs.leadpages.co/the-breakthrough-
book-club-d/
Introduction
Thank you very much for choosing this book! JavaScript programming is one of the unique interpreted
programming languages that is absolutely essential in producing World Wide Web content. Like most of the
programming languages out there, JavaScript too is a C language based syntax that is object oriented and
produces real life based outputs.
This book is going to give you an insight to what JavaScript programming is all about and the things you can
create once you are done with it. You will learn about the different concepts involved in JavaScript, its
syntax and how you can start programming in it. This programming language will help you greatly in
webpages and its designs. There are more advanced versions of JavaScript available, JavaScript will help
you cover the elementary concepts that are not only easy but are also helpful in understanding the more
advanced versions of the language.
JavaScript is going to help you become better at creating algorithms, understanding basics of any object
oriented programming language and also create your own content. This book is going to give you all the
information you will need in order to understand and start with JavaScript Programming as we go through
the chapters.
JavaScript is a high-level, untyped, dynamic and yet interpreted programming language that has been
standardized in the ECMAscript language specification. JavaScript is also one of the three main
programming languages that bolster the World Wide Web content production, along with HTML (Hyper
Text Markup Language) and CSS (Cascading Style Sheets). A big majority of the internet websites employ
JavaScript in their makeup and it is also supported by almost all the modern web browsers with plug-ins or
any other external software to make it compatible with the system or the browser. It is one of the
programming languages that is prototype based and contains great world class features that makes it on
par with the other multi paradigm languages and also supports object-oriented (outputs are real time
objects), functional and imperative programming styles.
JavaScript also supports an Application Programming Interface or an API that supports various features
such as text, dates, characters, arrays, matrices, regular expressions and so on. One down side to it is that it
does not support any Input/output or an I/O which include networking, graphic facilities, or even storage
and relies on the host environment for these features as they are embedded on them.
Though the infamous misconceptions still take place, Java and JavaScript are completely unrelated except
for the standard and syntactic libraries and also have very different semantics. While it is true that the
syntax of JavaScript is based on C language, the semantics and design is derived from and influenced by the
Self and Scheme Programming languages.
JavaScript is known for its versatility in the compilation and synthesizing software required to run a
program, it can also be executed in environments that are not Web based such as Notepad, PDF
documents, desktop widgets and even website applications. Earlier, JavaScript was traditionally
implemented just as an interpreted language on the client side but later evolved into a just in time
compilation in the more recent versions of the browsers. The latest and the faster versions of JavaScript
include Virtual Machines (VMs) and platforms are built upon them. JavaScript I, increasingly popular in the
game development, server side network programming with runtime environments such as Node.js and even
in the creation of the desktop and mobile applications.
History
JavaScript Beginnings in Netscape
Brendan Eich is the creator of JavaScript, who was still employed in Netscape Communications
Corporation and he managed to finish developing the idea of JavaScript in about 10 days in the Year 1995
around the month of May. Netscape Communications Corporation was indeed in a race competing against
Microsoft in creating the user adoption of Web Technologies and platforms. Netscape considered itself a
client-server offering a portable version of Sun Microsystems’ Java with a distributed Operating System and
providing an environment in which applets could be run. The most distinguishing feature of Java is that it
was a competitor of C and C++ which was aimed at the professional programmers whereas Netscape
wanted to be more of a light weight interpreted language that would complement Java and also appeal to
the nonprofessional programmers, much like Microsoft’s Visual Basic.
It was initially developed under the name Mocha, but was also often referred to as LiveScript when it was
first released and was shipped to the beta releases of Netscape Navigator 2.0 in September 1995, but after
which it was renamed as JavaScript. This was the official name Netscape Browser version 2.0 B3 used after
it was deployed.
It became clear that the change of the name from LiveScript to JavaScript happened at the time when
Netscape was adding support for Java Technology in its Netscape Navigator Web Browser. This tended to
cause a storm among the programmers who immediately assumed that JavaScript was some sort of a spin-
off of Java programming language and it was all a part of Netscape’s marketing ploy that went off to give
JavaScript the cachet of what was then the new, hot website programming language much similar to what
Java enjoyed for years.
Though there was a popular misconception in the 90s when JavaScript was first introduced, the
programming language was highly inspired by an earlier website scripting language which was developed by
Nombas known as C--, not to be confused with the actual C— which was created in 1997. Brendan Eich,
the creator of JavaScript then said he had, however, never heard of C— before creating LiveScript in the
year 1995. Actually Nombas had pitched their webpage embedded scripting system to Netscape which was
a new concept at that time and was known by ViolaWWW. Later, Nombas actually dropped C— and
started to offer JavaScript in their ScriptEase product and was part of the TC39 group that standardized
ECMAscript in the 90s.
Server side JavaScript
In the year 1995, Netscape was trying implementation of the language of server side scripting with
Netscape Enterprise Server in the month of December soon after the release of browser version of
JavaScript. There was a resurgence of the server side interpretation of JavaScript in the mid - 2000s such as
the Node.js.
Adoption by Microsoft
Microsoft Windows released many scripting technologies in the year 1996 including VBScript and Jscript
and so on. Microsoft released Jscript as a reverse engineered implementation of Netscape
Communications Corporation’s JavaScript which was released in the year 1996 on the 16th of July as a part
of Internet Explorer 3 and as well as acting as an available server in the Internet Information Server. IE3
included a lot of Microsoft’s first support for CSS (Cascading Style Sheet) and the extended versions of
HTML. In each case of the implementation of JavaScript, it was noticeably different to that found in
Netscape Navigator at that time. These glaring differences in the languages used in the scripting of a
webpage made it difficult for web designers and programmers and left them confused as to what they
should do in order to make a single website work well in both browsers leading to ‘the best and most
viewed in Netscape’ and ‘Best viewed in Internet Explorer’ logos that became a big part of the first of the
‘Best Browser Wars’. The programmers and web designers soon overcame this roadblock all thanks to
JavaScript, one of the most cutting edge languages that allowed them to cross platforms and it was
compatible with almost all standard driven web. Without JavaScript the web developer faced a hard time
to write and design web pages for both the major browsers and could not afford the time. After the release
of Internet Explorer 4 Microsoft started to introduce the concept of Dynamic HTML, but the different
language implementation in the proprietary document object models remained as acles to widespread take
up of JavaScript on the World Wide Web.
Standardization
In year 1996 during the month of November, Netscape made an announcement that they had submitted
JavaScript to the Ecma International for a consideration to become an industry standard and subsequently
the work done by Netscape bolstered it to become the standardized version of ECMAScript. In the
following year, ECMA International led to publish its first edition of the ECMA-262 and its specifications. In
the month of June of 1998, they made several changes and modifications to adapt it to the ISO/IEC-16262
standard and hence the second version was released. The subsequent third edition of ECMA-262 was
released in the month of December in 1999.
However, the development of the fourth edition of the ECMAScript standard was stopped half way through
and was never completed. Whereas they proceeded to make the 5th edition which was released in
December 2009. The sixth and the current edition of the ECMAScript being used today was released in June
2015.
Later Developments
Suffice to say, JavaScript became one of the most popular programming languages on the Web because of
its crass platform features and other specifications. However, initially many of the professional
programmers and web developers denigrated the language because of its target audience and said that it
was for ‘amateurs’ and for web authors, and so on. The emergence of Ajax on the scene returned
JavaScript to the spotlight and captured the attention of more professional programmers and computer
experts. In order to improve the JavaScript Programming practices, they started to proliferate the
comprehensive frameworks and libraries which resulted in the increased usage of the JavaScript even
outside the web browsers which can be seen in the proliferation of server side JavaScript platforms.
However in the year 2009, the CommonJS projected was founded, aimed at the goal of establishing a
common standard library mainly for JavaScript program development outside the Web browser.
With reaching heights of popularity of the single page applications which were heavily embedded with
JavaScript, it was soon increasingly used as a compile target for most of the source to source compliers
from both static languages and dynamic languages. EMscripten in particular, and other optimized JIT
compliers, in tandem with asm.js that was compatible with AOT companies like OdinMonkey, have paved a
way for enabling C and C++ program to be compiled into JavaScript and caused the programs to be
executed in near native speeds, causing JavaScript as the “Assembly Language of the Web” much like what
Perl enjoys today.
Trademark
Today, ‘JavaScript’ is trademarked by the Oracle Corporation. It is still being used under the license for
technology that was invented and executed by Netscape communications and currently holds the
entitlement to establishments such as the Mozilla Foundation.
As described above JavaScript is a lightweight, interpreted programming language, which is now being used
in creating network specific applications. JavaScript is also complementary and integrated with Java which
is very easy to implement when embedded along with HTML and CSS. It is an open and cross platform
programming language.
Now let us explore the various specifications of JavaScript before getting to the syntax. First and foremost
you need to understand the basic functionality of JavaScript before you go on to designing a dynamic web
page and applications.
Client side JavaScript
One of the most popular forms of programming versions is the Client-side JavaScript, that is, the script that
needs to be included in or referenced by a HTML document for the programming to be interpreted by the
user.
This means that the web page need not be a static webpage written with static HTML but can include
various programs and functions to interact with the user and dynamically create HTML content by
controlling the browser.
This client-side mechanism exhibits many advantages over the usual CGI server-side scripts. For example,
the programmer can use JavaScript to check if the user has entered the right user ID in the form field in a
web page.
The JavaScript code ensures that the entries listed by the user are valid or not and then proceed to execute
commands to submit the form to the web browser. It can also be used to trap user initiated events such as
the link navigation, button clicks and other actions that are either implicitly or explicitly initiated by the
user.
Advantages of JavaScript
The following lists the merits of using JavaScript while designing a webpage:
● Less server interaction – That is the user input can be validated before sending the page off
the server which helps lessen server traffic. This means that you are offering less load on the
server which prevents from congestion.
● Immediate response to the users – JavaScript does not wait for a page to reload to notify the
user of anything they have forgotten or missed.
● Increase in interactivity – There are more options for you to create interfaces using which the
webpage can interact with the user, like when the user hovers over a marquee with the mouse or
activates it using the keyboard.
● Richer interfaces – JavaScript is used to include various items such as the drag and drop
components and sliders to provide a better interface experience for your web users.
Limitations of using JavaScript
JavaScript cannot be treated as a full-fledged programming language due to the demerits and the
features it lacks listed below:
● The most important version of JavaScript, the client-side JavaScript does not allow the
reading and writing of the files due to various security purposes.
● There is no support available for JavaScript to be used in networking applications.
● JavaScript also lacks having any multiprocessor or multithreading capabilities.
JavaScript Development Tools
One of the major advantages of using JavaScript is that it does not require any expensive tools and
software to run. JavaScript can even be executed using simple text editors such as Notepad. It does not
even require a complier since it is an interpreted language used inside the context of the web browser.
To make matters simple, various corporations have come forward with great editing tools designed
specifically for JavaScript. Some of them are listed down below –
● Microsoft FrontPage – FrontPage is a software created by Microsoft that is used to edit HTML
codes but also provides a good interface for JavaScript. It provides web developer a number of tools
required by them to execute JavaScript Tools and assist in the creation of interactive websites.
● Macromedia HomeSite 5 – Similar to Microsoft FrontPage, HomeSite 5 is a popular HTML and
JavaScript editor created by Macromedia and can be used to manage personal websites efficiently.
Where is JavaScript today?
As we have discussed before the ECMAScript 5 standard will be the first update released in over four years
and JavaScript 2.0 conforms to Edition 5 of ECMAScript standard, where the differences between the two
is extremely minor.
The exact specifications of JavaScript 2.0 can be found in the following URL : http://www.ecmascript.org/
Today although both Netscape’s JavaScript and Microsoft’s Jscript still support the features of ECMAScript
standards and conform to it, they are still not a part of it.
Syntax of JavaScript is the written text that will allow you to give instructions to the web browsers that will
follow the guideline in order to perform various operations. JavaScript statements are usually placed
within the <script> …. </script> HTML tags in a web page. There is also an option for you to place your
JavaScript code anywhere within your webpage in the <script> tags but it is normally recommended that
you keep it within the <head> tags.
The <script> tags always alerts the browser program to read and interpret each and every line between
these tags as a script. A simple JavaScript syntax will look like this:
<script>
JavaScript code
</script>
There are two important attributes of script tag –
● Type – This attribute is usually what is recommended to indicate the scripting language that is
used in the web site and its values used usually be set to “text/javascript”
● Language – This attribute specifies the kind of scripting language used in the web design. Its value
is usually “javascript”, even though the recent versions of HTML (and its successor XHTML) have
phased out the use of this attribute.
And so your JavaScript code will look something like this:
<script language = javascript” type=”text/javascript”>
JavaScript code
</script>
How to write your very own JavaScript Program?
The most famous test program for any programming language is the printing of “Hello World” in the
output screen. Let us dig in further on how we can execute that. In this program we will be adding an
optional HTML comment that is surrounded by our JavaScript code. Next, we have to conjure a function
document.write which embeds a written string into the HTML document.
This function is generally used to write HTML, text or both. The following is the example program to print
“Hello World”.
<html>
<body>
<script language="javascript" type="text/javascript">

</script>
</body>
</html>
OUTPUT:
Hello World!
Whitespace and Line Breaks

One of the main things to remember while typing a JavaScript program is that it ignores all spaces,
newlines, tabs, and so on. Using Tabs, spaces and newlines are completely your wish and you are allowed
to format your program in which ever way it is convenient and easy for you. If you indent your programs
to look neat and consistent, then it will be easy for both you and a third party who reads the code and
understand it quickly. This also makes it easier for you to spot errors in the program line.
Semicolons are Optional

In C, C++ and Java it is usually required that every complete command is truncated with a semicolon, and
the same rule is implemented in JavaScript for simple statements. However, in JavaScript, it allows you to
omit a semicolon, only when you place your statements in different lines so that the browser can
understand the command.
NOTE: However, it is healthy to practice programming with the use of semicolons since they are an
integral part of so many other programming languages.
Case Sensitivity
It is important to note that JavaScript is a case sensitive language, that means the language and the case of
the keywords, function names, variables and all of the other identifiers must be maintained at the same
case at all times throughout the program.
For example, the identifier char and CHAR have different meanings and can be used as individual keywords
in the same program.
NOTE – It is important to pay close attention to the name of your variables and the functions since they
cannot match a keyword. If they do then it will throw an error.
Comments in JavaScript
JavaScript is known to support both the styles of C language and C++ in its comments, that is –
● Any text between the ‘//’ symbol, and all the other characters that follow are treated as a
comment by JavaScript. That is, it will not read these lines and it is used for your personal
purposes only.
● Any text and characters in between in the symbols /* and */ will be treated as a comment in
JavaScript. These comments can span multiple lines at a time unlike //.
● JavaScript recognizes the HTML comment sequence that opens with a  is not recognized by JavaScript and so a comment should be
closed with //-->.
Almost all the modern browsers that we use today come with a built in support for JavaScript that can be
enabled or disabled by the users manually. This chapter focuses on enabling and disabling the JavaScript
settings and support system in your browsers such as the - Internet Explorer, Google Chrome, Mozilla
Firefox and Opera to name a few.
JavaScript in Internet Explorer:
The following instructions will guide you to turn on and turn off the JavaScript support in your Internet
Explorer –
● Go to Tools → Select Internet Options from the menu
● Click on the Security Tab from the dialog box
● Select the Custom Level button.
● Scroll down the drop box until you find Scripting Options in the list.
● After locating the Active Scripting, select the Enable radio button.
● Finally click on the okay button and exit the window.
In order to disable the JavaScript support in your Internet Explorer settings, all you need to do is follow the
same set of instructions expect selecting Disable radio button under Active Scripting.
JavaScript in Mozilla Firefox
The following instructions will guide you to turn on and turn off the JavaScript support in your Mozilla
Firefox –
● Open a Mozilla Firefox tab and type about: config in the address bar of the page.
● After which a warning dialog will open and you need to select ‘I’ll be careful, I promise!’
● You will find a list of all the configure options in the browser in a drop box.
● Type javascript.enabled in the search bar of the web browser.
● Here you will find an option to enable and disable JavaScript by right clicking on the option →
then select toggle
JavaScript in Google Chrome
The following instructions will guide you to turn on and turn off the JavaScript support in your Google
Chrome –
● Select the Chrome menu which is located at the top right hand corner of your web browser.
● Click on the settings option
● Select Show Advanced Settings which is located at the end of the page.
● Click on the content settings button which is right below the Privacy Section.
● You will need to select “Do not allow any site to run JavaScript” in order to disable JavaScript
settings or select “Allow all sites to run JavaScript (recommended)”
JavaScript in Opera
The following instructions will guide you to turn on and turn off the JavaScript support in your Opera
browser -
● Open the Tools menu and select Preferences.
● Click on the Advanced option from the dialog box.
● Select Content from the drop down box.
● Click on the Enable JavaScript checkbox

● Finally click on the okay button and exit the menu.
To disable the JavaScript support in your Opera web browser, you should leave the Enable JavaScript
button unchecked.
Warning for Browsers that do not support JavaScript
If there is anything you need to use JavaScript for in the browsers that don’t support JavaScript, then you
are able to display a warning message using the <noscript> tags.
The noscript tag is added immediately after the script block as written below:
<html>
<body>
<script language = “javascript” type = “text/javascript”>
document.write(“Hello World!!”)
</script>
<noscript>
Sorry JavaScripy is required in order to proceed.

</noscript>
</body>
</html>
In case the user’s browser does not support JavaScript or is not enabled then the message will be displayed
on the screen from </noscript>. JavaScript enjoys flexibility to include JavaScript in a HTML file as follows
–
● Program code inside <head> … </head> section.
● Program code inside <body> … </body> section.
● Program code inside <head> … </head> and <body> … </body> section.
● Program code in an external file and then include the <head> … </head> section.
JavaScript Data types
One of the most basic and fundamental building blocks of a programming language is the set of data types
it supports. There are various types and collections of data types that are used and here are the types of
values that is allowed to be used and manipulated in JavaScript.
JavaScript consists of the following basic data types –
● Strings and characters: It is a special character or a collection of characters. For example, ‘This
is a text string’
● Numbers: They are numerical values which can be expressed normally, with decimals (floating
points), binary and hexadecimals, for example, 145, 23.98 etc.
● Boolean: They are logical expressions, example AND logic, OR logic, etc.
In JavaScript the most rudimentary type of data is null and undefined, where each of which can define only
one value. Apart from these primitive data types, JavaScript also supports a composite data type, that is a
collection of basic data types, wrapped into a single object.
NOTE: It is important to note that JavaScript does not distinguish between integer values and floating point
values. All numbers are taken and represented in the form of floating point numbers using the 64 bit
floating point format which is defined in the IEEE 754 standard.
JavaScript Variables
One of the main attributes of any programming language are the variables. JavaScript, like many offers
variables similar to C, C++ and Java. Variables are usually a named container. Their use is similar to that of
an algebraic variable, where the letter or a word contains different numerical and alphanumerical values at
some point in the program.
In JavaScript, the basic keyword to create a variable is var and you must declare it in the beginning of the
program before you start using it in your program.
<script type = “text/javascript”>
<!—
var amount;
var rate;
//-->
</script>
There is also an option of declaring multiple variables with a same var keyword at the same time. This is
known as dynamic initialization of a variable.
<!—
var amount, rate;
-->
</script>
This type of declaring the variable name and type is known as variable initialization. You can initialize a
variable at any point of time and anywhere in the program as and when you need a variable. All variables
must be used at some point or else JavaScript throws an error for redundant variables.
Here is the type of initializations that can be done throughout the program. You can also change the values
of the variables at any time inside the programs. Here is an example of variable initialization –
<Script type = “text/javascript”>

</script>
NOTE – Once a var keyword declares or initializes a variable in the program, the same variable cannot be
initialized in the document again.
Like it was mentioned before, JavaScript is an untyped language. This means that the variable declared in a
JavaScript can be of any data type, a number, character, string or even a Boolean expression. This feature
isn’t possible in so many of the other programming languages. Most of them need to specify the type of
variable being declared in the program as and when they type it. JavaScript interprets the type of change
that the variables goes through the run time of the program and adapts the data type accordingly.
JavaScript Variable Scope
In any programming language you need to understand the scope of a variable. The scope is the area or the
region of the program in which the variable is valid. JavaScript supports only two types of scope –
● Global variable – A global variable is declared in the main body of the program or even before
the main program and its scope is valid from the line it is declared and is valid throughout the
program in your JavaScript code.
● Local Variables – A local variable is valid only inside a section of the program, specifically
inside a function or parenthesis. Any reference to that variable outside the scope will cause
JavaScript to throw errors.
It is important to note that, inside the body of the function, the global variable is given less precedence
than a local variable of the same name. If you happen to declare a variable or a function name same as a
global variable it is recommended to, effectively hide it. Take a look at this example –
<html>
<body onload = checkscope();>
<script type = "text/javascript">

</script>
</body>
</html>
This is the OUTPUT of the following program
Local
JavaScript Variable Names
There are so many factors that you should remember before you name your variable in a JavaScript
program. Here is a list of things you need to consider before creating a variable –
● It is the rule of thumb that you absolutely refrain from using any of the already reserved
keywords of JavaScript as your variable names. The list of keywords that are reserved is mentioned
in the next section. For example, words like Boolean or break are not valid variable names.
● In JavaScript, the variable names may contain a number but it cannot start with a numeral
(from 0 to 9). They must either begin with a letter or an underscore. For example, a valid variable
name is test123 or _123test but 123test is invalid.
● Like mentioned before JavaScript is case sensitive and it is possible for the same word to be a
variable with different characterization. For example, money and Money are two different words
and can be used as two different variables.
JavaScript Keywords or Reserved Words
Keywords are an essential fundamental indicators of a programming language and they may be used for
various purposes. These words are reserved and cannot be used to name any of the JavaScript variables,
characters, functions, methods, objects or loop tables.
abstract else instanceof switch

boolean enum int synchronized
break export interface this
byte extends long throw
case false native throws
catch final new transient
char finally null true
class float package try
const for private typeof
continue function protected var
debugger goto public void
default if return volatile
delete implements short while
do import static with
double in super
Operators are the expressions that is used to manipulate a set of variables. For instance, you need to
perform a mathematical operation 3 + 6 is equal to 9. The variables that are used to manipulate, i.e. 3 and
6 are known as operands and the ‘+’ sign is known as the operator. Like many other programming
languages, JavaScript supports the following types of operators.
Arithmetic Operators
Comparison Operator
Logical Operators
Assignment Operators
Conditional Operators
Now let us discuss them in further detail.
Arithmetic Operators
Arithmetic Operators are used to perform various mathematical operations inside the JavaScript program.
The following are used in JavaScript.
Let us assume that the operands a and b hold the values 20 and 30.
Sr.No Operator and Description
1 Addition – ‘+’
This operator gives the added values of two operands
Ex: A + B = 30
2 Subtraction – ‘-‘
This operator gives the subtracted values of two operands
Ex: A - B = -10
3 Multiplication – ‘*’
This operator gives the multiplied value of two operands
Ex: A * B = 600
4 Division – ‘/’
This operator gives the quotient after dividing two operands
Ex: B / A = ¾
5 Modulus – ‘%’
This operator gives the remainder value after dividing two operands
Ex: B % A = 10
6 Increment – ‘++’
This operator adds one to the operand.
Ex: A++ will give 21
7 Decrement – ‘—‘
This operator subtracts the value of the operand by one.
Ex: A-- will give 19
NOTE: The addition operator is used to add both numerals and strings. For example, “a” + 20 will give
“a20”.
Example program for Arithmetic Operators:

The following program illustrates how to use and manipulate variables using arithmetic operators.
<html>
<body>
<script type="text/javascript">

</script>
</body>
</html>
OUTPUT of the following program is
a+b=43
a-b=23
a/b=3.3
a%b=3
a+b+c=43
++a=35
--b=8
You can change the values of the variables in your program and try it.
Comparison Operator
Comparison Operators are used in comparing the values of two operands and then making a conclusion
from it. JavaScript supports the following comparison operators –
Assume that the variables A and B hold the values 20 and 30 respectively -
1 Equal – ‘==’
This operator checks if the values of two operands are equal, and if
they are equal then the output is true.
Ex: (A == B) is not true.
2 Not Equal – ‘!=’

This operator checks if the values of two operands are not equal,
and if they are not equal then the output is true.
Ex: (A != B) is true.
3 Greater than – ‘>’

This operator checks if the value of first operand is greater than the
other, and if it is greater, then the output is true.
Ex: (A > B) is not true.
4 Less than – ‘<’

This operator checks if the value of second operand is greater than
the other, and if it is greater, then the output is true.
Ex: (A < B) is true.
5 Greater than or Equal to – ‘>=’

This operator checks if the value of first operand is greater than or
equal to the other, and if it is greater or equal to the next operand,
then the output is true.
Ex: (A >= B) is not true.
6 Less than or Equal to – ‘<=’

This operator checks if the value of first operand is lesser or equal to
the second operand, and if it is lesser than or equal, then the output
is true.
Ex: (A <= B) is true.
EXAMPLE PROGRAM:
The following JavaScript program will help you understand how the logical operators are initialized and
how it works in a program.
<html>
<body>

</script>
</body>
</html>
OUTPUT of the following program is
(a == b) => false
(a < b) => true
(a > b) => false
(a != b) => true
(a >= b) => false
(a <= b) => true
Logical Operators
Logical Operators are the ones used in executing Boolean expressions in the JavaScript program. Here are
the logical operators supported by JavaScript –
Assume that the variables A and B hold the values 20 and 30 -

1 Logical AND – ‘&&’

This operator checks if both the operators are non-zero, and if so
the condition is true.
Ex: (A && B) is true.
2 Logical OR – ‘||’
This operator checks if any one of the operators are non-zero, and if
so the condition is true.
Ex: (A || B) is true.
3 Logical NOT – ‘!=’

This operator is used to reverse the logical state of an operand.
When this condition becomes true then the Logical NOT will make it
false.
Reverses the logical state of its operand. If a condition is true, then
the Logical NOT operator will make it false.
Ex: ! (A && B) is false.
Example program
The following problem will aid in understanding how the logical operators are used and what outputs you
will be yielding –
<html>
<body>

</script>
</body>
</html>
OUTPUT
(a && b) => false
(a || b) => true
!(a && b) => true
Bitwise Operators
Bitwise operators are operators that can manipulate only one at a time. Boolean operators are also a part
of these.
Assume that the variables A and B are 2 and 3 respectively -
1 Bitwise AND – ‘&’

This operator performs the Boolean AND operation on each bit of its
integer arguments.
Ex: (A & B) is 2.
2 BitWise OR – ‘|’
This operator performs the Boolean OR operation on each bit of its
integer arguments.
Ex: (A | B) is 3.
3 Bitwise XOR – ‘^’
This operator performs the Boolean exclusive OR Operation on each
bit of its integer arguments and the condition becomes true when
both the operands are either zero or non-zero.
Ex: (A ^ B) is 1.
4 Bitwise Not – ‘~’

This is a unary operator and it reverses the operand before
operation.
Ex: (~B) is -4.
5 Left Shift – ‘<<’

According to the number specified, this operator moves the bits to
the left the number of places in the second operand. The new bits
are filled with zeros and shifting a value left by one position in binary
system, is equivalent of multiplying it by 2, and shifting it by 2 places
is like multiplying it by 4 and so on.
Ex: (A << 1) is 4.
6 Right Shift – ‘>>’

This operator is known as the Binary Right Shift Operator and it
moves the left operand’s value to the right by the number of bits
specified by the right operand.
Ex: (A >> 1) is 1.
7 Right shift with Zero – ‘>>>’

This operator is similar to the binary right shift operator, except that
the bits shifted in on the left are replaced with a zero.
Ex: (A >>> 1) is 1.
Example Program
<html>
<body>

</script>
</body>
</html>
OUTPUT
(a & b) => 2
(a | b) => 3
(a ^ b) => 1
(~b) => -4
(a << b) => 16
(a >> b) => 0
Assignment Operators
Assignment Operators helps you assign values to your variable in a JavaScript Code.
1 Simple Assignment - ‘=’

This operator is used to assign the value of the first operator to the
next.
Ex: C = A + B, the added values of the variables are stored in c
2 Add and Assignment – ‘+=’

This operator is used to simultaneously add itself and assign it to the
variable in the left.
Ex: B += A is same as B = B + A
3 Subtract and Assignment – ‘-=’

This operator is used to simultaneously subtract itself and assign it to
the variable in the left.
Ex: B -= A is equivalent to B = B - A
4 Multiply and Assignment – ‘*=’

This operator is used to simultaneously multiply itself and assign it to
the variable in the left.
Ex: B *= A is equivalent to B = B * A
5 Divide and Assignment – ‘/=’

This operator is used to simultaneously divide itself and assign the
quotient to the variable in the left.
Ex: B /= A is equivalent to B = B / A
6 Modules and Assignment – ‘%=’

This operator is used to simultaneously divide itself and assign the
remainder to the variable in the left.
Ex: B %= A is equivalent to B = B % A
NOTE: The same logic can be applied to all the Bitwise Operators and they are <<=, >>=, &=, |= and ^=.
EXAMPLE
<html>
<body>

</script>
</body>
</html>
OUTPUT
Value of a => (a = b) => 10
Value of a => (a += b) => 20
Value of a => (a -= b) => 10
Value of a => (a *= b) => 100
Value of a => (a /= b) => 10
Value of a => (a %= b) => 0
Miscellaneous Operators
The two important operators in JavaScript are the conditional Operator and the Typeof operator.
Conditional Operator ( ? ;)
The conditional operator is like an ‘if else’ statement, that is, it first evaluates an expression using the
other operators listed above and then determines if it is true or false and then executes the given
statement depending on the condition assigned.
EXAMPLE PROGRAM
<html>
<body>

</script>
</body>
</html>
OUTPUT:
((a > b) ? 100 : 200) => 200
((a < b) ? 100 : 200) => 100
Typeof Operator
This is a type of unary operator that should be placed before a single operand which can be of any type
and its value indicating the data type of the operand.
The typeof operator uses “number”, “string” or “Boolean” only if the operand is number, string or Boolean
respectively and returns true or false accordingly.
This is a list of typeof return values that this operator generates -
Type String Returned by typeof
Number "number"
String "string"
Boolean "boolean"
Object "object"
Function "function"
Undefined "undefined"
Null "object"
EXAMPLE PROGRAM:
<html>
<body>

</script>
</body>
</html>
OUTPUT:
Result => B is String
Result => A is Numeric
While executing various algorithms in JavaScript, there will be times where you will have to repeat a
statement or an operation more than once or adopt certain set of paths. In these cases, you need case
statements that will help you check a certain condition and help you execute the necessary follow up
statements.
JavaScript supports conditional statements that are used to check a certain condition before executing the
relevant action. One of the main case statements used is the If … Else statement.
If-Else Statement
The If-Else Statement is very similar to the conditional Operator that was discussed in operators. There are
three forms of if-else statements :
If statement
If … Else statement
If … Else if … Statement
If Statement
The if statement is a singular, fundamental control line that allows JavaScript to make decisions based on
the condition and execute the necessary actions.
Syntax
If ( expression )
{
Statements to be executed if the expression is true
}
First, JavaScript reads the if condition in brackets. Then the values are substituted and checked if the
statement is true. In case it is true then it will follow the instructions written in the parenthesis below the
condition. If it is false these statements are ignored entirely.
EXAMPLE PROGRAM:
<html>
<body>

</script>
<p>Set the variable to different value and then try...</p>

</body>
</html>
OUTPUT:
Qualifies for driving.
If … Else Statement
This is the next version of the if statement that allows you to perform the if statement based upon the
conditions provided but then executes a set of instructions for the false case also.
Syntax
If ( expression )
{
Statements that need to be executed if the condition is true.
}
Else
{
Statements that need to be executed if the condition is false.
}
Like the if statement, the condition is evaluated. If the expression is true then the statements in the
parenthesis are executed. If the expression is false the statements in the parenthesis below the else
statement.
EXAMPLE PROGRAM:
< html>
<body>

</script>

</body>
</html>
OUTPUT
Does not qualify for driving
If … Else If … Statement
The if … else if … statement is a more complex version of if else statement that maps it out for multiple
conditions.
Syntax
If ( expression 1 )
{Statements that should be executed if the expression 1 is true }
Else if ( expression 2 )
{Statements to be executed when expression 2 is true}
{Statements to be executed when expression 3 is true }
{Statements to be executed when expression 4 is true }
Else
{Statements to be executed when all expressions are false}
This concept is similar to the if and if else statements. Whenever the if statements are true the statement
below it is executed and when everything is false it executes the last statement under else.
EXAMPLE PROGRAM:
<html>
<body>

</script>

</body>
<html>
OUTPUT
Math Book
Switch Case
Switch case is a simpler method of executing the multiple if.. else if… statements that was mentioned
above. It is a method to perform multi way branch. The one downside to this is that the conditions are all
dependent on the value of a single variable.
From JavaScript 1.2 edition, the switch statement were used in case of nested if statements. This is more
efficient and handles it better than the if conditions.
Syntax
Switch ( expression )
{
Case condition 1 : Statement
break;
break;
break;
break;
break;
break;
break;
default : statement
break
}
The break statement is often used to help the program to exit the switch case statements and proceed
with the main program once the execution is done.
EXAMPLE PROGRAM
<html>
<body>

</script>
</body>
</html>
OUTPUT
Entering switch block
Good job
Exiting switch block
Loops
Like it was mentioned before there will be times when you will have to write the same statements over and
over again to execute certain operations. In order to reduce the space and decrease the complexity of
program, a concept known as the loops are introduced. JavaScript uses all the necessary loops required to
reduce the number of line taken to write a program.
The While Loop
The while loop is the most basic loop in JavaScript that is also easy to execute. The purpose of a while loop
is that, you can repeat a set of statements or blocks till the time it is required. This repetition will continue
only if the while statement is true. The loop will cease as soon as it reaches false condition.
Syntax
The syntax of while loop is –
While (expression)
{
Statements that need to be executed until the expression remains true.
}
EXAMPLE PROGRAM:
<html>
<body>

</script>
</body>
</html>
OUTPUT:
Starting Loop Current Count : 0
Current Count : 1
Current Count : 2
Current Count : 3
Current Count : 4
Current Count : 5
Current Count : 6
Current Count : 7
Current Count : 8
Current Count : 9
Loop stopped!
The Do … While Loop
It is a more advanced version of while loop. The do while loop condition will execute once before the
condition is rechecked and iterate. The loop will continue to execute if the while condition is true and will
stop once it reaches false condition.
Syntax
The syntax of do.. while is
Do
{statements that need to be executed until the while condition remains true
} while ( expression );
NOTE: Do not forget to place the semicolon after the while condition or else the loop will not execute
properly.
EXAMPLE PROGRAM
<html>
<body>
<!—
Var count = 0;
Document.write (“ starting Loop” + “<br />”);

Do{
Document.write (“Current Count : “ + count + “<br/>);

Count ++;
}
While (count < 5);
Document.write(“ Loop stopped!”);
//-->
</script>
OUTPUT
Starting Loop
Current Count : 0
Current Count : 1
Current Count : 2
Current Count : 3
Current Count : 4
Loop Stopped!
For Loop
The most compact form of looping is the For loop and it includes the 3 important parts which are listed
below:
● Loop Initialization is where we initialize our counter to a starting value and the initialization
statement in the loop begins.
● Test statement is similar to the if condition statement. This is the condition that determines
when the loop should terminate. This condition is checked after each and every iteration.
● The iteration statement is usually a counter. This keeps the number of repetitions in check.
You have to combine all of these three parts in a statement which is separated using semi colons.
Syntax
The syntax for the for loop is described below –
For ( initialization ; test condition; iteration statement )
{ statements that need to be executed whenever the test condition is true }
EXAMPLE PROGRAM:
<html>
<body>

</script>
</body>
</html>
OUTPUT
Starting Loop
Current Count : 0
Current Count : 1
Current Count : 2
Current Count : 3
Current Count : 4
Current Count : 5
Current Count : 6
Current Count : 7
Current Count : 8
Current Count : 9
Loop stopped !
Conclusion
Thank you once again for choosing this book to learn JavaScript. JavaScript is a very important
programming language that is essential in the structuring of a website or a web page. This language has
gone through many revisions and the latest one also supports static and dynamic web browsing which is
possible due to Perl programming language. One of the biggest merits of using JavaScript is that its
programming structure is similar to all the other object oriented programming languages such as C
language, C++ and Java. Though there are a lot more programming languages that are popping up in every
corner, JavaScript acts as a keystone in web development without which the internet would be an
extremely disorganized place.
I hope this book gives you an insight to the introduction and history of JavaScript that is helpful in learning
about its evolution and where it is today. This book only covers basic programming where you will be
familiar with the basic terminology and its usage. Learning these concepts will not only be helpful in
learning JavaScript, but also in other programming languages since these are the building blocks of any
structured programming.
Hope you have understood the basic concepts that deals with JavaScript and the specifications that is
unique to it. You now have a basic understanding of the variables, keywords, operators and loops that
merely just scratches the surface of what you can actually accomplish with JavaScript. There are more
advanced concepts where you can create user defined data types known as objects or classes, then there
are functions that can be conjured as and when you require it instead of repeating the same instructions
over and over again and so many more real time applications such as cookies, events, dialog boxes and
page printing that is possible with JavaScript.
Now that you have some knowledge on what to program and where to program it, I encourage you to try it
by yourself in any of the methods that I have mentioned above. Keep trying and keep learning since this
could help you better you career in ways that you didn’t even think was possible!
Happy programming!
Thank you for Reading! I Need Your Help…

Dear Reader,
I Hope you Enjoyed “JavaScript: QuickStart Guide - Effective JavaScript Programming
”. I have to tell you, as an Author, I love feedback! I am always seeking ways to improve my current books
and make the next ones better. It’s readers like you who have the biggest impact on a book's success and
development! So, tell me what you liked, what you loved, and even what you hated. I would love to hear
from you, and I would like to ask you a favor, if you are so inclined, would you please share a minute to
review my book. Loved it, Hated it - I’d just enjoy your feedback. As you May have gleaned from my books,
reviews can be tough to come by these days and You the reader have the power make or break the success
of a book. If you’d be so kind to CLICK HERE to review the book, I would greatly appreciate it! Thank you so
much again for reading “JavaScript: QuickStart Guide - Effective JavaScript Programming” and for
spending time with me! I will see you in the next one!
Check Out More From The Publisher…

HTML: QuickStart Guide Creating an Effective Website
by William Fischer
http://www.amazon.com/HTML-QuickStart-Effective-Wordpress-Javascript-ebook/dp/B01ACB7OMS
SEO: Marketing Strategies to Dominate the First Page

by Grant Kennedy
http://www.amazon.com/SEO-Marketing-Strategies-analytics-optimization-ebook/dp/B01ACB7LQM
CSS :
Quick Start Guide - Effective Web Design

Legal Notice:
Disclaimer Notice:
Contents
Introduction
Prerequisites
Heading Tags
Paragraph Tag
Line Break Tag
Centering Content
Horizontal Lines
Preserve Formatting
Nonbreaking Spaces
HTML Tag vs. Element
Nested Elements in HTML
Attributes
Internationalization Attributes
Bold Text
Italic Text
Underlined Text
Strike Text
Monospaced Font
Superscript Text
Subscript Text
Inserted Text
Deleted Text
Larger Text
Smaller Text
Grouping Content
Emphasized Text
Marked Text
Strong Text
Text Abbreviation
Acronym Element
Text Direction
Special Terms
Quoting Text
Short Quotations
Text Citations
Computer Code
Keyboard Text
Programming Variables
Program Output
Address Text
Specifying Keywords
Document Description
Document Revision Date
Document Refreshing
Page Redirection
Setting Cookies
Setting Author Name
Specify Character Set
Chapter 6: Comments
Valid vs. Invalid Comments
Multiline Comments
Conditional Comments
Using Comment Tag
Commenting Script Code
Commenting Style Sheets
Insert Image
Set Image Location
Set Image Width/Height
Set Image Border
Set Image Alignment
HTML Unordered Lists
HTML Ordered Lists
HTML Color Coding Methods
HTML Colors - Color Names
HTML Colors - Hex Codes
HTML Colors - RGB Values
Browser Safe Colors
Conclusion
Introduction
History
Conclusion
Introduction
Chapter 1: The Advantages of Using CSS
Chapter 2: CSS Modules
Chapter 3: Inclusion
Chapter 4: Measurement Units
Chapter 5: Colors
Chapter 6: Background
Chapter 7: Fonts
Chapter 8: Text
Chapter 9: Using Images
Chapter 10: Links
Chapter 11: Tables
Chapter 12: Borders
Chapter 13: Margins
Conclusion
Introduction
CSS, the shortened version of Cascading Style Sheets, is one of the simplest of all the design languages, the
one you need to use for the most effective web design. CSS will handle how your webpages look and how
they feel; you can set the text color, the font style, how much space there is between each paragraph, how
the web page columns are laid out and sized, the colors and images needed for the background and all the
other layout and design variations that you need to make your website work on all different screen sizes
and devices.
CSS is incredibly easy to understand and learn and it gives you powerful control over how your HTML
document are presented. It is commonly combines with two of the more popular markup languages, HTML
or XHTML, to provide you with all the tools you need to produce a well-designed website.
For the purpose of this book, I am going to take you through all of the main aspects of web design that you
can control CSS, together with sample code. I hope that, by the end of it, you have some idea of how easy
CSS is to use and the amazing results you can produce.
Chapter 1: The Advantages of Using CSS
CSS has a lot of advantages over and above any other similar program, including:
Time-Savings - with CSS, you can write it once and then use the exact same sheet in a number of different
HTML pages. Each HTML element can have its own separate style that can be applied to multiple web
pages.
Faster Page Load Times – when you use CSS, there is no need to write the HTML tag attribute every single
time. Instead, you can write just one rule for a tag and then apply it to every occurrence of the tag. Less
code equals much faster loading times
Easy to Maintain - when you want to make a global change, all you need to do is change the style; each
element relating to that style in all the web pages it was used in will be changed
Superior to HTML in Style – CSS provides access to a much bigger range of attributes than HTML does so
your HTML page will look better than if you used HTML attributes.
Compatibility with Multiple Devices – Your style sheets allow for content to be optimized for more multiple
types of device. Using the same HTML document, you can produce different website versions for printing,
for PDAs or for mobile devices, for example.
Global Web Standards – More and more, CS I being recommended over HTML so now is a good time to
start learning it and using it in all your HTML pages. That way, they will be compatible with the browsers of
the future.
Offline Browsing CSS is able to store applications locally using offline cache. This mean that you will find it
easier to view offline websites and, because of the cache, they will load faster and the website will
perform better.
As you can see, CSS offers a ton of advantages over using HTML, not least the fact that it is now the
recognized standard. With CSS becoming more and more poplar, now is the best time to start your learning
process.
Without any further ado, let us delve into the CSS elements that you use for web design.
Before I go any further, I must state that some of the example code used in the book is attributed to
www.tutorialspoint.com.
Chapter 2: CSS Modules
CSS modules take on the existing CSS specifications along with a number of extension features, including:
Selectors
Box Model
Image Values
Backgrounds and borders
Replaced content
Text effect
D and 3D transformations
Animations
Multiple column layout
Use Interface
CSS is made up of a number of style rules that are interpreted by the browser before being applied to the
right element of the document. Style rules are split into three:
Selector - this is the HTML tag that the style is applied to. Examples of these tags are, <h1> or <table>.
Property – Properties are types of HTML ta attributes. In simple terms, all HTML attributes are
changed to CSS properties, for example, color border, etc.
Value – Each property is assigned a value or value. For example, the color property may have a
value of red or perhaps #F2F2F2, etc.
The syntax for a CSS style rule is:
selector { property: value }
For eample, you could define a border on a table as:
table{ border :1px solid #C00; }
In this example, the table is a selector and border is a property. It has been given a value of 1px solid #C00
Selectors can be defined in a number of ways so let’s look at each different one:
Type Selectors
You saw an example of the Type selector above but let’s have a look at another - a way of adding a color
to all of the level 1 headings:
h1 {
color: #36CFFF;
}
Universal Selectors
Instead of selecting the elements that relate to a specific type, this selector just matches the names of the
element types. For example:
{
color: #000000;
}
In this example, the content of all the elements has been turned to black
Descendant Selectors
Let’s say you want to give a particular element a style but only when it is inside a specific element. In the
following example, we are applying the style rule to the <em> element but only when it is outside of the
<ul> tag:
ul em {
color: #000000;
}
Class Selectors
Class selectors allow you to use the class attribute of the elements to define your style rules. All of the
elements of that particular class are formatted as per the defined rule:
.black {
color: #000000;
}
In this example, the rule has turned the content of all the elements with the class attribute of black to the
color black. You could go one step further if you like:
h1.black {
color: #000000;
}
Now you have specified that only the content inside the <h1> element with a class attribute of black will be
turned to black.
You are not limited to just one class selector for an element though. Look at this example:
<p class="center bold">
The style of this paragraph is defined by the classes Bold and Center
</p>
ID Selectors
Style rules can be defined on the id attribute of an element and, when a rule is defined, it will format all
elements with the specified id attribute:
#black {
color: #000000;
}
This rule will turn the content of all elements that has the id attribute to black. You can be a bit more
specific if you like, for example:
h1#black {
color: #000000;
}
This rule turns the content for <h1> elements to black ONLY if the id attribute is set to black.
The real power of an id selector become known when they are used as foundations for the descendant
selector, for example:
#black h2 {
color: #000000;
}
Here, you can see that all of the level 2 headings will be turned to black only when they lie inside a tag that
has the id attribute set as black
Child Selectors
The child selector is similar to the descendant selector but with different functionality. Look at this
example:
body > p {
color: #000000;
}
This will turn the paragraphs to black only if they are the direct child of the <body> element. Other
paragraphs that are inside other elements, like <td> or <div> would not change.
Attribute Selectors
Styles can also be applied to HTML element that have specific attributes. Look at the example below; you
can see that the style rule is going to match all the input elements that have a type attribute with a text
value:
input [type = "text"]{
color: #000000;
}
The advantage to using this method is that <input type = “submit” /> is not affected and the color change
only applied to certain text fields.
The following rules are for the attribute selector:
p[lang] - this selects all of the paragraph elements that have a lang attribute
p[lang]= “fr”] – this selects all the paragraph elements with lang attributes that have an exact value
of “fr”
p[lang~="fr"] – this selects all the paragraph elements that have a lang attribute containing “fr”
p[lang|="en"] – this selects all the paragraph elements with a lang attribute containing exact values
of “en” or that start with “en-“.
Multiple Style Rules
Multiple style rules can be defined for one single element and these should be defined to combine a
number of properties and their corresponding value into one block, as in this example:
h1 {
color: #36C;
font-weight: normal;
letter-spacing: .4em;
margin-bottom: 1em;
text-transform: lowercase;
}
In this example, you can see that the pairs of properties and their value are each separated by a semi-colon
(;). They can stay in one single line or you can spread them over multiple lines but, to read them better, we
have kept them on single lines.
Grouping Selectors
Styles can be applied to multiple selectors. You just have to remember to separate each with a comma, as
shown in this example:
h1, h2, h3 {
color: #36C;
margin-bottom: 1em;
}
This style rule will apply to all of the h1, h2 and h3 elements as well. The order in the list is not relevant
because all of the elements in the selector are going to have the declarations applied to them. As you can
see from the example below, various class selectors can be combined:
#content, #footer, #supplement {
position: absolute;
left: 510px;
width: 200px;
}
Chapter 3: Inclusion
You have four ways of associating styles with HTML documents, the most common of which is the inline
CSS and the External CSS methods.
Embedded CSS
CSS rules can be put into an HTML document with the use of the <style> element. The tag goes inside the
<head>…</head? Tag ad the rules that are defined with this syntax are applicable to all of the available
elements. The following example shows and embedded CSS style element:
<!DOCTYPE html>
<html>
<head>
<style type = "text/css" media = "all">

body {
background-color: linen;
}
h1 {
color: maroon;
margin-left: 40px;
}
</style>
</head>
<body>
<h1>This is a heading</h1>
<p>This is a paragraph.</p>
</body>
</html>
Attributes
The attributes commonly associated with the <style> elements are shown in the following table:
Attribute Value Description
type Text/css This attribute specifies the language for the style
sheer as an MIME content type and s a required
attribute
media screen This specifies which device the document is going to
tty be displayed on. The default value is all and this is
tv classed as an optional attribute
projection
handheld
print
braille
aural
all
Inline CSS
You can also use the style attributes from any HTML elements to define the rules. These specific rules will
only be applied that the particular element. The generic syntax is:
<element style = "...style rules....">
Attributes
The value of a style attribute is a mixture of different style declarations, each separated by semi colons.
The following example is based on the generic syntax:
<html>
<head>
</head>
<body>
<h1 style = "color:#36C;"> This is inline CSS </h1>
</body>
</html>
External CSS - The <link> Element
You can use the <link> element as a way of including an external stylesheet in the HTML document.
External stylesheet are separate text files that have a .css extension. You will define all of your style rules
in this file and this can then be added to any HTML document by using the <link element. The generic syntax
is:
<head>
<link type = "text/css" href = "..." media = "..." />
</head>
Attributes
The attributes that are associated with the <style> elements are as follows:
Attribute Value Description
type text/css This specifies the language for the style sheet
as a MIME content type and is a required
attribute
href URL This specifies that the style sheet has style
rules and is also a required attribute
media Screen Tis specifies which devices the document can
tty be displayed on and is an optional attribute.
tv The default value is All
projection
handheld
print
braille
aural
all
As an example, consider a style sheet called mystyle.css with these rules:

h1, h2, h3 {
color: #36C;
margin-bottom: 1em;
}
Now, using the following code, you can add this file to any HTML document:
<head>
<link type = "text/css" href = "mystyle.css" media = " all" />
</head>
Imported CSS - @import Rule
The @import rule is used to import external stylesheets in a similar way to the <link> element. The generic
syntax is:
<head>
<@import "URL";
</head>
In this syntax, URL is used as the URL of the specific stylesheet that contains the style rules. Another way of
writing it would be:
<head>
<@import url("URL");
</head>
The following example shows you how to import the style sheet to the HTML document:
<head>
@import "mystyle.css";
</head>
Overriding CSS Rules
So far, we have looked at four different ways to include a style sheet in an HTML document. Now we look
at how to override any of the style sheet rules:
An inline style sheet will take the top priority, including over any rule that is defined in an external
sheet or defined in <style> … </style> tags
Any <style> … </style> tag will override an external sheet file
External style sheet rules are the lowest priority and will only be applied if the inline style or <style>
… </style> tags do not apply
How to Handle an Old Browser
There are quite a few of the older browsers that don’t provide support for CSS so, when you are writing
your Embedded CSS in HTML documents, please take care. The following example show how to use
comment tags as a way of hiding CSS from an older browser:
<style type="text/css">

</style>
CSS Comments
Sometimes you will need to add extra comments in to your style sheet blocks but it is very easy to
comment on any part of a style sheet. All you do is put your comments within /*…. this is a comment in a
style sheet…. */.
You can also use /*…. */ to comment on multi-line blocks in the same way that you would in C or C++
languages.
For example:
<!DOCTYPE html>
<html>
<head>
<style>
p{
color: red;
/* a single-line comment */
text-align: center;
}
/* a multi-line comment */
</style>
</head>
<body>
<p>Hello World!</p>
</body>
</html>
This will result in “Hello, World!” being displayed on your screen.
Chapter 4: Measurement Units
CSS supports several different measurements including relative measures, like percentages, and absolute
unit, like centimeters, inches, points, etc. These values are required when you specify measurements in the
Style rules, for example, e.g. border = “1px solid red”.
The following table lists the CSS measurement units together with examples:
Unit Description Example
% This defines the measurement as a percentage relative to p {font-
other values. A typical one would be an enclosing element. size:
16pt;
line-
height:
125%;}
cm This defines measurements in centimeters div
{margin-
bottom:
2cm;}
em This is a relative measurement for font height in em spaces. p {letter-
An em unit is the equivalent of the size of any given font and, spacing:
because of this, if you were to assign 12 pt to a font, each of 7em;}
the em units would be 12 pt. This means that 2em would
equal 24 pt.
ex This defines the measurement that is relative to the x-height p {font-
of the font. We determine the x-height by the height of the size:
lowercase x in the specified font 24pt;
line-
height:
3ex;}
in This defines the measurement in inches p {word-
spacing:
.15in;}
mm This defines the measurement in millimeters p {word-
spacing:
15mm;}
pc This defines the measurement in picas, which is equivalent p {font-
to 12 points. This means that there are 6 picas to an inch. size:
20pc;}
pt This define the measurement in points, which is defined as body
1/72 of an inch {font-
size:
18pt;}
px Defines the measurement in screen pixels. p
{padding:
25px;}
vh This is 1% of the viewport height. h2 {
font-
size:
3.0vh; }
vw This is 1% of the viewport width h1 {
font-
size:
5.9vw; }
vmin This is 1vw or 1vh, whichever is the smallest p { font-
size:
2vmin;}
Chapter 5: Colors
In CSS we use values to specify colors. Usually these are used when we set the color for the text of an
element, which is the foreground, or the background of the element. We can also use them to change the
color of decorative effects, such as a border.
The color values can be specified in several different formats, as displayed in the following table:
Format Syntax Example
Hex Code #RRGGBB p{color:#FF0000;}
Short Hex Code #RGB p{color:#6A7;}
RGB % rgb(rrr%,ggg%,bbb%) p{color:rgb(50%,50%,50%);}
RGB Absolute rgb(rrr,ggg,bbb) p{color:rgb(0,0,255);}
keyword aqua, black, etc. p{color:teal;}
Let’s look at these formats in more detail:

Hex Codes
Hexadecimals are 6-digit color representations. The first digit – RR – represent red values, GG represents
green values and BB represents the blue values.
The values can be taken from graphics software, such as JASC Paintshop Pro, Adobe Photoshop, Advanced
Paintbrush, etc. Each of the hexadecimal codes are preceded by a # or a £ sign and the following are
examples of hexadecimal notations:
Color Color HEX
#000000
#FF0000
#00FF00
#0000FF
#FFFF00
#00FFFF
#FF00FF
#C0C0C0
#FFFFFF
Short Hex Codes

This is just a shorter version of the hex code, and each digit is replicated so that you get the equivalent 6-
dgit value. These values can also be taken from graphics software and are also preceded by the # or £ sign:
Color Color HEX
#000
#F00
#0F0
#0FF
#FF0
#0FF
#F0F
#FFF
RGB Values
We specify this value with the rgb() property, which takes three values – red, green and blue. Values are
percentages or integers between 0 and 255. Be aware that not all browsers offer support for rgb() so try
not to use it.
Color Color RGB
rgb(0,0,0)
rgb(255,0,0)
rgb(0,255,0)
rgb(0,0,255)
rgb(255,255,0)
rgb(0,255,255)
rgb(255,0,255)
rgb(192,192,192)
rgb(255,255,255)
Building the Color Codes

If you use the CSS Color Code Builder, you can build, quite literally, millions of different color code but you
will need a browser that is Java-enabled to do this.
Browser-Safe Colors
The following tables show you the 216 colors that are considered to be safe and are computer-
independent. They vary from hexa code 000000 through to FFFFFF and are safe because all computers can
display the colors in the right way on a 25 color palette:
000000 000033 000066 000099 0000CC 0000FF
003300 003333 003366 003399 0033CC 0033FF
006600 006633 006666 006699 0066CC 0066FF
009900 009933 009966 009999 0099CC 0099FF
330000 330033 330066 330099 3300CC 3300FF
333300 333333 333366 333399 3333CC 3333FF
336600 336633 336666 336699 3366CC 3366FF
339900 339933 339966 339999 3399CC 3399FF
660000 660033 660066 660099 6600CC 6600FF
663300 663333 663366 663399 6633CC 6633FF
666600 666633 666666 666699 6666CC 6666FF
669900 669933 669966 669999 6699CC 6699FF
990000 990033 990066 990099 9900CC 9900FF
993300 993333 993366 993399 9933CC 9933FF
996600 996633 996666 996699 9966CC 9966FF
999900 999933 999966 999999 9999CC 9999FF

CCCC00 CCCC33 CCCC66 CCCC99 CCCCCC CCCCFF
CCFF00 CCFF33 CCFF66 CCFF99 CCFFCC CCFFFF
FFCC00 FFCC33 FFCC66 FFCC99 FFCCCC FFCCFF
FFFF00 FFFF33 FFFF66 FFFF99 FFFFCC FFFFFF

Chapter 6: Background
In this chapter, we are going to look at setting backgrounds for different HTML elements. The following
properties can be set:
background-color - to set the background color of the element
background-image - to set the background image of the element
background-repeat – to control background image repetition
background-position – to control where a background image is positioned
background-attachment – to control how a background image scrolls
background – used as a shorthand method of specifying various background properties
Setting the Background Color
The following example shows you how to set background color on an element:
<html>
<head>
<body>
<p style = "background-color:yellow;">
This text has a yellow background color.</p>
</body>
</head>
<html>
You will see the following on your screen:
The text has a yellow background color.
How to Set the Background Image
The following example shows how to call a local stored image to set the background:
<html>
<head>
<style>
body {
background-image: url("/css/images/css.jpg");
background-color: #cccccc;
}
</style>
<body>
<h1>Hello World!</h1>
</body>
</head>
<html>
You will now see “Hello, World!” appear on the specified background
How to Repeat the Background Image:
The following is an example of how to repeat a small background image. The no-repeat value can be used
for the background-repeat property if the image is NOT to be repeated and is only to be displayed once. By
default, the value of background-repeat is set to repeat:
<html>
<head>
<style>
body {
background-repeat: repeat;
}
</style>
</head>
<body>
<p>Tutorials point</p>
</body>
</html>
The background that we used in the last example will now be shown repeated. In the following example,
we can see how to repeat an image vertically:
<html>
<head>
<style>
body {
background-repeat: repeat-y;
}
</style>
</head>
<body>
<p>Tutorials point</>
</body>
</html>
The chosen background image will be repeated vertically.
In the next example, we look at horizontal repetition:
<html>
<head>
<style>
body {
background-repeat: repeat-x;
}
</style>
</head>
<body>
</body>
</html>
The chosen background image will be repeated horizontally
How to Set the Position of the Background Image
This example shows you how to set the image in a position that is 100 pixels in from the left hand side:
<html>
<head>
<style>
body {
background-position:100px;
}
</style>
</head>
<body>
</body>
</html>
The background image will be placed in the specified position
Now we look at how to set the image 100 pixels in from the left and 200 pixels from the top:
<html>
<head>
<style>
body {
background-position:100px 200px;
}
</style>
</head>
<body>
</body>
</html>
The background image will be placed in the specified positon
How to Set the Background Attachment
This determines if an image is to be fixed or if it should scroll when the page is scrolled. First, we look at a
fixed image:
<!DOCTYPE html>
<html>
<head>
<style>
body {
background-image: url('/css/images/css.jpg');
background-repeat: no-repeat;
background-attachment: fixed;
}
</style>
</head>
<body>
<p>The background-image is fixed. Try scrolling down the page.</p>

</body>
</html>
You will see this line repeated however many times it is in the code:
The background-image is fixed. Try scrolling down the page.
Followed by this:
If you do not see any scrollbars, try to resize the browser window.
Next, we look at setting a scrolling background:

<!DOCTYPE html>
<html>
<head>
<style>
body {
background-image: url('/css/images/css.jpg');
background-repeat: no-repeat;
background-attachment: fixed;
background-attachment:scroll;
}.
</style>
</head>
<body>

</body>
</html>
Again, you will see this message repeated on a scrolling background
The background-image is fixed. Try scrolling down the page.
Followed by this:
If you do not see any scrollbars, try to resize the browser window.
How to use the Shorthand Property
The final example shows how to set all of the background properties at the same time by using the
shorthand background property:
<p style="background:url(/https/www.scribd.com/images/pattern1.gif) repeat fixed;">
This paragraph has a fixed background image that will be repeated.
</p>
Chapter 7: Fonts
Now we are going to look at how to set up the fonts. The following are the font properties that you can set
for an element:
font-family - is used to change the font face
font-style - is used to turn a font oblique or italic
font-weight – is used to increase or decrease the boldness or lightness of a font
font-variant – used to give the font a small caps effect
font-size – is used to make a font bigger or smaller
font – shorthand for specifying various font properties
How to Set the Font Family
The following example shows how to set the font family of a specific element. The value can be any font
family name:
<html>
<head>
</head>
<body>
<p style="font-family:georgia,garamond,serif;">
This text will be rendered in georgia, garamond, or the default serif font
depending on which ones are in your system.
</p>
</body>
</html>
It will produce the following result –
This text will be rendered in georgia, garamond , or the default serif font, depending on which ones are in
your system
How to Set the Font Style
The following example shows how to set the style of an element. Values can be italic, normal, oblique, etc.
<html>
<head>
</head>
<body>
<p style="font-style:italic;">
This text is rendered in italic style
</p>
</body>
</html>
You will get the following result:
This text is rendered in italic style
How to Set the Font Variant
This example shows how to set the font variant with possible values of small-caps, normal, etc.
<html>
<head>
</head>
<body>
<p style="font-variant:small-caps;">
The text is going to be rendered as small caps
</p>
</body>
</html>
THE TEXT IS GOING TO BE RENDERED AS SMALL CAPS
How to Set the Font Weight

The next example shows how we set the font weight of an element. This property will specify the bold level
of the font and possible values include – normal, lighter, bold, bolder, 100, 200, 300, 400, 500, 600, 700,
800, 900, etc.
<html>
<head>
</head>
<body>
<p style="font-weight:bold;">The font is bold.</p>
<p style="font-weight:bolder;">The font is bolder.</p>
<p style="font-weight:500;">The font is 500 weight.</p>
</body>
</html>
The font is bold.
The font is bolder.
The font is 500 weight.
How to Set the Font Size
This example shows how to set up the font size of the element. This is used as a way of controlling the font
size and has possible values of – small, x-small, xx-small, xx-large, x-large, large, smaller, larger, %, or size in
pixels:
<html>
<head>
</head>
<body>
<p style="font-size:20px;">The font size is 20 pixels</p>
<p style="font-size:small;">The font size is small</p>
<p style="font-size:large;">The font size is large</p>
</body>
</html>
The font size is 20 pixels

The font size is small
The font size is large

How to Set Font Size Adjust
This example will demonstrate how we set the font size adjust and lets you change the x-height to make
the font more readable. The possible values can be any number:
<html>
<head>
</head>
<body>
<p style="font-size-adjust:0.61;">
The text uses a font-size-adjust value.
</p>
</body>
</html>
You will get the following result -
THE TEXT USES A FONT-SIZE-ADJUST VALUE.
How to Set the Font Stretch
This next example shows you how to set up the font stretch and it relies on your computer to have either
an expanded or a condensed version of the particular font. The values could possibly be – wider, normal,
narrower, extra-condensed, ultra-condensed, condensed, semi-condensed, expanded, semi-expanded,
extra-expanded, ultra-expanded:
<html>
<head>
</head>
<body>
<p style="font-stretch:ultra-expanded;">
If this doesn't look like it works, most likely your computer does not have a condensed or
expanded version of the font
</p>
</body>
</html>
If this doesn't look like it works, most likely your computer does not have a condensed or expanded
version of the font
How to Set the Shorthand Property
The final example shows you how to use the font property to set all of the font properties at the same
time:
<html>
<head>
</head>
<body>
<p style="font:italic small-caps bold 15px georgia;">
This will apply all of the properties on the text at the same time.
</p>
</body>
</html>
THIS WILL APPLY ALL OF THE PROPERTIES ON THE TEXT AT THE SAME TIME.
Chapter 8: Text
This chapter is going to take a look at how we can manipulate text with the use of some CSS properties.
The following text properties can be used on an element:
color – used to set what color the text is
direction – used to set the direction of the text
letter-spacing – used to add in or remove spaces between letter in a word
text-indent – used to indent the first line of a paragraph of text
text-align – used to align the text in an entire document
text-decoration – used to add decoration to text, such as underline, overline, and strikethrough
text-transform – used to either capitalize the text or convert between upper and lower case letters
white-space – used to control text flow and formatting
text-shadow – used to set a shadow around the text
How to Set the Text Color
This example shows how we set the color of the text, using values of any color name in any format that is
valid
<html>
<head>
</head>
<body>
<p style="color:red;">
This text is shown in red.
</p>
</body>
</html>
You will see the following result -
This text is shown in red.
How to Set the Direction of the Text
The next example shows how we set the text direction, using values of ltr or rtl
<html>
<head>
</head>
<body>
<p style="direction:rtl;">
This text is going to be rendered from right to left
</p>
</body>
</html>
You will see this result -
This text is going to be rendered from right to left
How to Set the Spaces Between Characters
This example shows how we set up the spaces between the characters, using values of normal or number
specifying space
<html>
<head>
</head>
<body>
<p style="letter-spacing:5px;">
This text will have spaces between letters.
</p>
</body>
</html>
This text will have spaces between le ers.
How to Set the Spaces Between Words
The next example shows how we set space in between words, using values of normal or number specifying
space
<html>
<head>
</head>
<body>
<p style="word-spacing:5px;">
This text has spaces between words.
</p>
</body>
</html>
This text has spaces between words.
How to Set the Text Indent
The next example shows how we indent the first line of a new paragraph using values of number specifying
indent space or %
<html>
<head>
</head>
<body>
<p style="text-indent:1cm;">
The text has the first line indented by 1cm and it will remain at
this position. This is done using the CSS text-indent property.
</p>
</body>
</html>
The text has the first line indented by 1cm and it will remain at this position. This is done using the CSS
text-indent property
How to Set up the Text Alignment
This example shows how we align text, using values of justify, left, right and center
<html>
<head>
</head>
<body>
<p style="text-align:right;">
The text will be right aligned.
</p>
<p style="text-align:center;">
The text will be center aligned.
</p>
<p style="text-align:left;">
The text will be left aligned.
</p>
</body>
</html>
The text will be right aligned.
The text will be center aligned.
The text will be left aligned.
How to Decorate Text
Now we look at an example showing how we decorate text, using values of none, overline, underline, blink
and strikethrough
<html>
<head>
</head>
<body>
<p style="text-decoration:underline;">
This text is underlined
</p>
<p style="text-decoration:line-through;">
This text is struck through.
</p>
<p style="text-decoration:overline;">
This text has an over line.
</p>
<p style="text-decoration:blink;">
This text has a blinking effect
</p>
</body>
</html>
This text is underlined
This text is struck through.
This text has an over line.
This text has a blinking effect
How to Set Text Cases
This example shows how we set up text cases using values of non, uppercase, lowercase and capitalize
<html>
<head>
</head>
<body>
<p style="text-transform:capitalize;">
This text will be capitalized
</p>
<p style="text-transform:uppercase;">
This text will be in uppercase
</p>
<p style="text-transform:lowercase;">
This text will be in lowercase
</p>
</body>
</html>
This Text Will Be Capitalized
THIS TEXT WILL BE IN UPPERCASE
this text will be in lowercase
How to Set Whitespace between Text
This example shows how to handle whitespace in an element, using values of nowrap, normal and pre
<html>
<head>
</head>
<body>
<p style="white-space:pre;">
This text will have a line break and the white-space pre setting will tell the browser to honor
it the same as the HTML pre tag.</p>
</body>
</html>
This text will have a line break and the white-space pre setting will tell the browser to honor it the same as
the HTML pre tag.</p>.
How to Set a Text Shadow
This final example shows how to set a shadow around a piece of text. Be aware that this may not have the
support of every browser
<html>
<head>
</head>
<body>
<p style="text-shadow:4px 4px 8px blue;">
Provided your browser will support CSS text-shadow property, the text will have a blue shadow
</p>
</body>
</html>
Provided your browser will support CSS text-shadow property, the text will have a blue shadow
Chapter 9: Using Images
Images are an important part of websites and, although you shouldn’t use too many, those you do use
should be of good quality and in the right place. CSS helps to control the display of these images by
allowing you to set the following properties:
Border – this is used to set the width of the border on the image
Height – this is used to set the height of the image
Width – this is used to set the width of the image
-most-opacity - this used to determine the opacity of the image
Image Border
This property is used to set the width of the border on the image and can use values of length or %. For
example:
<html>
<head>
</head>
<body>
<img style="border:0px;" src="/css/images/logo.png" />
<br />
<img style="border:3px dashed red;" src="/css/images/logo.png" />
</body>
</html>
The result will be a logo without a border and then a logo with a dotted red border
Image Height
This property is used to set how high an image is and can use values of length or %. When you use %, the
value is applied to the box which the image is in:
<html>
<head>
</head>
<body>
<img style="border:1px solid red; height:100px;" src="/css/images/logo.png" />
<br />
<img style="border:1px solid red; height:50%;" src="/css/images/logo.png" />
</body>
</html>
The result will be two logos, exactly the same, but one taller than the other
Image Width
This is used to set the width of an image using value of % or length. As with height, using percentage applies
to the box the image is in
<html>
<head>
</head>
<body>
<img style="border:1px solid red; width:150px;" src="/css/images/logo.png" />
<br />
<img style="border:1px solid red; width:100%;" src="/css/images/logo.png" />
</body>
</html>
The result will be two identical logos but of different sizes
-Moz-Opacity
The final property is use to set up the opacity of the image and is used with Mozilla Firefox. For Internet
Explorer, we use filter:alpha (opacity:x), to come up with transparent images.
In Mozilla Firefox, in the property (-moz-opacity:x), x may hold a value of anywhere between 0.0 and 1.0.
The lower the value, the more transparent the image. By the same token, in Internet Explorer
(filter:apha(opacity=x)), the value of x can be anywhere between 0 and 100. Again, the lower the value,
the more transparent the image is.
<html>
<head>
</head>
<body>
<img style="border:1px solid red;-moz-opacity:0.4;filter:alpha(opacity=40);"
src="/css/images/logo.png" />
</body>
</html>
The result will be a logo with a border of solid red.
Chapter 10: Links
In this chapter, we take a look at how to use CSS to set the properties of a hyper link. The following
properties can be set:
:link is used to signify unvisited hyperlinks.
:visited is used to signify visited hyperlinks.
:hover is used to signify elements that have the mouse pointer hovering over the top.
:active is used to signify elements that are currently being clicked.
Normally, these properties are stored in the header of an HTML document. Remember the following rules
for effective use:
a:hover comes after a:link and a:visited in CSS definition
a:active comes after a:hover, as shown in the next example:
a:link {color: #000000}
a:visited {color: #006600}
a:hover {color: #FFCC00}
a:active {color: #FF00CC}
</style>
Next we will look at how these properties are used for different effects on hyperlinks.
Set the Color
This example shows how we set the color of a link using values that are of any color name in any format
that is valid:
<html>
<head>
a:link {color:#000000}
</style>
</head>
<body>
<a href="">Link</a>
</body>
</html>
The result will be a black link. Please note that none of these links are clickable; they are just for
demonstration purposes.
Link
The Color of Visited Links
This example shows how to set the color of a visited link, again with values of any color name in any
format that is valid:
<html>
<head>
a:visited {color: #006600}
</style>
</head>
<body>
<a href=""> link</a>
</body>
</html>
The result will be the following link, black to start and green when clicked on.
Link
Color of Links with Mouse Hover

This example shows how to change the color of a link when we hover the mouse pointer over it:
<html>
<head>
a:hover {color: #FFCC00}
</style>
</head>
<body>
<a href="">Link</a>
</body>
</html>
The result will be a black link that changes to yellow when the mouse is hovered over the top
Link
Color of Active Links
This example shows how we change the color of an active link:
<html>
<head>
a:active {color: #FF00CC}
</style>
</head>
<body>
<a href="">Link</a>
</body>
</html>
The result will be a black link that changes to pink when it is clicked on.
Link
Chapter 11: Tables
In this chapter, we are going to look at the properties we can set for HTML tables. The following properties
can be set:
Border-collapse – this specifies whether the cells of the table should maintain their own
appearance or if the browser should control the borders that touch
Border-spacing – this specifies the width of the space between table cells
Caption-side captions – these are in the <caption> element and rendered, by default, above the
table. They can be used to set the position of the table caption
Empty-cells – this specifies whether there should be a border shown on empty cells
Table-layout – this lets the browser speed up the table layout by using the first width property it
finds for a column without having to load the table and then rendering it
Next we look at these properties with examples.
Border-Collapse
This property may have two values – collapse and separate. This example uses both:
<html>
<head>
table.one {border-collapse:collapse;}
table.two {border-collapse:separate;}
td.a {
border-style:dotted;
border-width:3px;
border-color:#000000;
padding: 10px;
}
td.b {
border-style:solid;
border-width:3px;
padding:10px;
}
</style>
</head>
<body>
<table class="one">
<caption>Collapse Border Example</caption>
<tr><td class="a1 Cell 1 Collapse Example</td></tr>
<tr><td class="2"> Cell 2 Collapse Example</td></tr>
</table>
<br />
<table class="two">
<caption>Separate Border Example</caption>
<tr><td class="1"> Cell 1 Separate Example</td></tr>
<tr><td class="2"> Cell 2 Separate Example</td></tr>
</table>
</body>
</html>
This will give you these results;
Collapse Border:
Cell 1 Collapse Example
Cell 2 Collapse Example
Separate Border:
Cell 1 Separate Example
Cell 2 Separate Example
Border-Spacing
This property specifies how much distance there is between the border of two adjacent cells. It can take
either of two values, each of which should be a length unit. One value applies to horizontal and vertical
borders while using two values will refer to the vertical and the horizontal spacing.
/* If you provide a value */
table.example {border-spacing:10px;}
/* This is how to provide two values */
table.example {border-spacing:10px; 15px;}
</style>
The next example modifies the first example:
<html>
<head>
table.one {
border-collapse:separate;
width:400px;
border-spacing:10px;
}
table.two {
width:400px;
border-spacing:10px 50px;
}
</style>
</head>
<body>
<table class="one" border="1">

<caption>Separate Border Example with border-spacing</caption>
<tr><td> Cell A Collapse Example</td></tr>
<tr><td> Cell B Collapse Example</td></tr>
</table>
<br />
<table class="two" border="1">

<caption>Separate Border Example with border-spacing</caption>
<tr><td> Cell A Separate Example</td></tr>
<tr><td> Cell B Separate Example</td></tr>
</table>
</body>
</html>
Caption-Side Property
This property allows you to specify the position of the <caption> element content in relation to the table.
It can use these four properties – top, left, bottom, right. The following example uses all of the four values:
<html>
<head>
caption.top {caption-side:top}
caption.bottom {caption-side:bottom}
caption.left {caption-side:left}
caption.right {caption-side:right}
</style>
</head>
<body>
<table style="width:400px; border:1px solid black;">

<caption class="top">
This caption will appear at the top
</caption>
<tr><td > Cell A</td></tr>
<tr><td > Cell B</td></tr>
</table>
<br />

<caption class="bottom">
The caption appears at the bottom
</caption>
</table>
<br />

<caption class="left">
The caption appears at the left
</caption>
</table>
<br />

<caption class="right">
The caption appears at the right
</caption>
</table>
</body>
</html>
Empty-Cells
This property is used to indicate if an empty cell should have a border or not. It can have one of these three
value – hide, show, inherit. This example shows the property being used to hide the borders of the empty
cells in the <table> element:
<html>
<head>
table.empty{
width:350px;
empty-cells:hide;
}
td.empty{
padding:5px;
border-style:solid;
border-width:1px;
}
</style>
</head>
<body>
<table class="empty">
<tr>
<th></th>
<th>Title one</th>
<th>Title two</th>
</tr>
<tr>
<th>Row Title</th>
<td class="empty">value</td>
</tr>
<tr>
<th>Row Title</th>
<td class="empty"></td>
</tr>
</table>
</body>
</html>
Table-Layout
This property is meant to help you control how the browser lays out or renders a table. It can have one of
these three value – inherit, auto or fixed. The next example shows the
<html>
<head>
table.auto {
table-layout: auto
}
table.fixed{
table-layout: fixed
}
</style>
</head>
<body>
<table class="auto" border="1" width="100%">

<tr>
<td width="20%">1000000000000000000000000000</td>
<td width="40%">10000000</td>
<td width="40%">100</td>
</tr>
</table>
<br />
<table class="fixed" border="1" width="100%">

<tr>
<td width="20%">1000000000000000000000000000</td>
<td width="40%">10000000</td>
<td width="40%">100</td>
</tr>
</table>
</body>
</html>
Chapter 12: Borders
Border properties allow you to say what the border of an element box should look like. The following are
the three properties that you can control
Border-color – allows you to specify the color of the border
Border-style – allows you to specify the style from a choice of values, including a solid line, dashed
line, double line, etc.
Border-width – allows you to specify the width of the border
Border-Color
This property lets you change the color of a border surrounding an element. You can change each side of
the border individually using these properties:
Border-bottom-color
Border-top-color
Border-left-color
Border-right-color
This example shows all four properties in use:
<html>
<head>
p.example1{
border:1px solid;
border-bottom-color:#009900; /* Green */
border-top-color:#FF0000; /* Red */
border-left-color:#330000; /* Black */
border-right-color:#0000CC; /* Blue */
}
p.example2{
border:1px solid;
border-color:#009900; /* Green */
}
</style>
</head>
<body>
<p class="example1">
The example shows all borders in different colors.
</p>
<p class="example2">
The example shows all borders in green only.
</p>
</body>
</html>
The result will
This example shows all borders in different colors.

This example shows all borders in green only.
Border-style
This property let you select one of these styles:
None – has no border at all
Solid – gives the border a solid line
Dotted – the border is made of dots
Dashed – the border is made of short lines
Double – this is two solid lines
Groove – make the border look like it has been carved into the page
Ridge – does the opposite of groove
Inset – the box looks embedded in the page
Outset – the box looks as though it is coming out of the page
Hidden – exactly the same as for None but with the exception of a border-conflict resolution for
table elements
As with color, you can change the style of each individual side of the border, using these properties:
Border-bottom-style
Border-top-style
Border-left-style
Border-right-style
This example uses all four of these styles:
<html>
<head>
</head>
<body>.
<p style="border-width:4px; border-style:none;">
This is a border with a width of none.
</p>
<p style="border-width:4px; border-style:solid;">

This is a solid border.
</p>
<p style="border-width:4px; border-style:dashed;">

This is a dashed border.
</p>
<p style="border-width:4px; border-style:double;">

This is a double border.
</p>
<p style="border-width:4px; border-style:groove;">

This is a groove border.
</p>
<p style="border-width:4px; border-style:ridge">

This is a ridge border.
</p>
<p style="border-width:4px; border-style:inset;">

This is an inset border.
</p>
<p style="border-width:4px; border-style:outset;">

This is an outset border.
</p>
<p style="border-width:4px; border-style:hidden;">

This is a hidden border.
</p>
<p style="border-width:4px;border-top-style:solid;
border-bottom-style:dashed; border-left-style:groove; border-right-style:double;">
This is a border with four different styles.
</p>
</body>
</html>
The result will be -
This is a border with none width.
This is a solid border.
This is a dashed border.
This is a double border.
This is a groove border.
This is a ridge border.
This is an inset border.
This is an outset border.
This is a hidden border.
This is a border with four different styles.
Border-Width
This allows you to set the width of the border, using a value of length in pt., px or cm or you can set it to
thick, medium or thin. You can change each side of the border individually, using these properties:
border-bottom-width
border-top-width
border-left-width
border-right-width
This example use all of these properties
<html>
<head>
</head>
<body>
<p style="border-width:4px; border-style:solid;">
This is a solid border with a width of 4px.
</p>
<p style="border-width:4pt; border-style:solid;">
This is a solid border whose width is 4pt.
</p>
<p style="border-width:thin; border-style:solid;">

This is a solid border whose width is thin.
</p>
<p style="border-width:medium; border-style:solid;">

This is a solid border whose width is medium;
</p>
<p style="border-width:thick; border-style:solid;">

This is a solid border whose width is thick.
</p>
<p style="border-bottom-width:4px;border-top-width:10px;
border-left-width: 2px;border-right-width:15px;border-style:solid;">
This is a border with four different widths.
</p>
</body>
</html>
The result will be:
This is a solid border whose width is 4px.
This is a solid border whose width is 4pt.

This is a solid border whose width is thin.
This is a solid border whose width is medium;
This is a solid border whose width is thick.
This is a border with four different widths.

Shorthand Border Properties
Using the shorthand border property, you can specify the style, color and width of the lines using just one
property instead of three. The following example uses the border property to combine all three and you
will find that this is the most commonly used method of setting a border around an element:
<html>
<head>
</head>
<body>
<p style="border:4px solid red;">
Another example:
</p>
</body>
</html>
Chapter 13: Margins
The final chapter deals with the margin property, i.e. the space around the HTML element. Martin property
values are not inherited by child elements and it is also possible that you can use negative value as a way of
overlapping the content.
Remember – the vertical margins that are adjacent to one another (that is the top and bottom margins) are
going to collapse into each other so that distance between each block is NOT the sum of the margins;
instead it is the larger of the margins or the same as one margin if both are the same size.
The following properties can be used:
Margin – specifies the shorthand for setting all the margin properties in one single declaration
Margin-bottom – specifies the bottom margin
Margin-top – specifies the top margin
Margin-left – specifies the left margin
Margin-right – specifies the right margin
Now we will look at how these properties are used.
Margin Property
This is a shorthand property that lets you set all properties for all four of the margin with a single
declaration. The following example shows you how to set a margin round a paragraph:
<html>
<head>
</head>
<body>
<p style="margin: 15px; border:1px solid black;">
all four margins will be 15px
</p>
<p style="margin:10px 2%; border:1px solid black;">

top and bottom margin will be 10px, left and right margin will be 2% of the total width of the
document.
</p>
<p style="margin: 10px 2% -10px; border:1px solid black;">

top margin will be 10px, left and right margin will be 2% of the total width of the document, bottom
margin will be -10px
</p>
<p style="margin: 10px 2% -10px auto; border:1px solid black;">

top margin will be 10px, right margin will be 2% of the total width of the document, bottom margin
will be -10px, left margin will be set by the browser
</p>
</body>
</html>
all four margins will be 15px
top and bottom margin will be 10px, left and right margin will be 2% of the total width of the document.
top margin will be 10px, left and right margin will be 2% of the total width of the document, bottom margin
will be -10px
top margin will be 10px, right margin will be 2% of the total width of the document, bottom margin will be
-10px, left margin will be set by the browser
Margin-Bottom
This allows you set up the bottom margin using a value of auto, length or %
<html>
<head>
</head>
<body>
<p style="margin-bottom: 15px; border:1px solid black;">
This is a paragraph with a specified bottom margin.
</p>
<p style="margin-bottom: 5%; border:1px solid black;">

This is another paragraph with a specified bottom margin in percent
</p>
</body>
</html>
The result will be -
This is a paragraph with a specified bottom margin
This is another paragraph with a specified bottom margin in percent
Margin-Top
This allows you to specify the top margin and uses a value of auto, length or %
<html>
<head>
</head>
<body>
<p style="margin-top: 15px; border:1px solid black;">
This is a paragraph with a specified top margin
</p>
<p style="margin-top: 5%; border:1px solid black;">

This is another paragraph with a specified top margin in percent
</p>
</body>
</html>
The result will be as follows -
This is a paragraph with a specified top margin
Margin-Left
This property allows you to set the left margin and use a value of %, auto or length
<html>
<head>
</head>
<body>
<p style="margin-left: 15px; border:1px solid black;">
This is a paragraph with a specified left margin
</p>
<p style="margin-left: 5%; border:1px solid black;">

</p>
</body>
</html>
The result will be as follows -
This is a paragraph with a specified left margin
Margin-Right
This property allows you to specify the right margin, using a value of auto, length or %
<html>
<head>
</head>
<body>
<p style="margin-right: 15px; border:1px solid black;">
This is a paragraph with a specified right margin
</p>
<p style="margin-right: 5%; border:1px solid black;">

This is another paragraph with a specified right margin in percent
</p>
</body>
</html>
The result will be shown as follows -
This is a paragraph with a specified right margin
This is another paragraph with a specified right margin in percent
Conclusion
Thank you for purchasing my book, I hope that you found it helpful. As you have seen, CSS is a truly
amazing tool for anyone who wants to get into the world of web design. Although it is one of the easiest to
understand and learn, I won’t promise that you can learn it overnight. Like any computer language, it takes
time and it takes patience.
You need to be dedicated to learning it and, once you have, you must be prepared to keep up with all the
latest developments. CSS isn’t a program you can learn, forget about and then pick up again a few months
later. While you will still have the basics in your mind, in those few months, much may have happened and
many changes may have been made. It is vital that you keep up with the changes and that you use CSS on a
daily basis to ensure that you do not lose any of your newfound skills.
CSS is a program that you learn, that you understand and that you live. Please may I ask a small favor of
you - will you leave a review for me at Amazon.com? It isn’t only helpful to me; it is helpful to others who
may decide to purchase my book.
As stated earlier, this is to reiterate that some of the example code that I have used in this book is
attributed to www.tutorialspoint.com

Programming - Programming QuickStart Box Set - HTML, Javascript & CSS (Programming, HTML, Javascript, CSS, Computer Programming) (PDFDrive)

Uploaded by

Programming - Programming QuickStart Box Set - HTML, Javascript & CSS (Programming, HTML, Javascript, CSS, Computer Programming) (PDFDrive)

Uploaded by

HTML: QuickStart Guide

Creating an Effective Website

This will be heading 1

Line Break Tag

Start Tag Content End Tag

<i> This is italic font content </i>

<marquee> This is marquee text </marquee>

<p> This is paragraph </p>

HTML Tag vs. Element

Nested Elements in HTML

ltr Left to right (this will be the default value)

The lang Attribute

Attribute Options Function

align right, left, center Horizontally aligns tags

valign top, middle, bottom Vertically aligns tags within an HTML

bgcolor numeric, hexadecimal, RGB Places a background color behind an

background URL Places a background image behind an

id User Defined Names an element for use with

class User Defined Classifies an element for use with

width Numeric Value Specifies the width of tables, images, or

height Numeric Value Specifies the height of tables, images, or

title User Defined "Pop-up" title of the elements.

The following word uses a superscript typeface.

You can add larger text in middle of a sentence using this.

<div id="content" align="left" bgcolor="white">

Adding Meta Tags to Your Documents

content Specifies the property's value.

Document Revision Date

Setting Author Name

Specify Character Set

Valid vs. Invalid Comments

Using Comment Tag

Commenting Script Code

Commenting Style Sheets

Set Image Location

Set Image Width/Height

Set Image Border

The type Attribute

The type Attribute

The start Attribute

HTML Definition Lists

Here is an example using <dt>

HTML Color Coding Methods

HTML Colors - Color Names

Black Gray Silver White

HTML Colors - Hex Codes

HTML Colors - RGB Values

Color Color RGB

Browser Safe Colors

000000 000033 000066 000099 0000CC 0000FF

Thank you for Reading! I Need Your Help…

Check Out More From The Publisher…

Quick start Guide – Effective JavaScript Programming

Breakthrough Book Club

Whitespace and Line Breaks

Semicolons are Optional

● Click on the Enable JavaScript checkbox

Sorry JavaScripy is required in order to proceed.

abstract else instanceof switch

Sr.No Operator and Description

Example program for Arithmetic Operators:

Sr.No Operator and Description

2 Not Equal – ‘!=’

3 Greater than – ‘>’

4 Less than – ‘<’

5 Greater than or Equal to – ‘>=’

6 Less than or Equal to – ‘<=’

document.write("(a == b) => ");

document.write("(a < b) => ");

document.write("(a > b) => ");

document.write("(a != b) => ");

document.write("(a >= b) => ");

document.write("(a <= b) => ");

Assume that the variables A and B hold the values 20 and 30 -

1 Logical AND – ‘&&’

3 Logical NOT – ‘!=’