Compressed Air Filtration

Oil and Particulate Contamination Removal

䡲 Low Pressure Drop

䡲 Reduces Energy Requirements
䡲 Comes With A Performance Guarantee
Sullair Compressed Air Filters

Sullair filters protect your plant equipment and Particulate Filters: SCF, SCR, PF and PR
processes, improve your product quality and reduce
your energy costs. Sullair offers filters for general High-efficiency pre-filters (after-filters) remove particles
purpose compressed air and for high quality to 1 micron, including coalesced liquid water and
compressed air for instrumentation, food processing lubricants. Maximum remaining aerosol content after
and pharmaceutical production. Sullair filters are filtration is 0.5 ppm @ 70°F.
available from 13 to 16,500 scfm, 15 to 725 psig,
35°F to 250°F, ISO 8573.1 quality classes. High Efficiency Filtration: SCH, SCHR and PH

• Compressed air is filtered to remove atmospheric For maximum filtration, Sullair offers compressed air
particulate, aerosols and other pollutants to provide filters to remove particulate down to 0.01 micron,
compressed air for general purposes to the most including water and oil aerosols, providing a maximum
critical application. remaining oil aerosol content of 0.01 ppm @ 70°F,
• Filtration equipment includes pre-filters, high when used with SCF and PF pre-filters.
efficiency filters and odor-removal filters.
• The type, number, and placement of filters depend Odor Removal: SCC, PC
on the applications and the degree of contaminant
removal required. Sullair filters use activated carbon to remove lubricant
and hydrocarbon odors. After filtration, remaining vapor
Five-Year Filter Guarantee content is less than 0.003 ppm (excluding methane).
This filter installation should always be preceded by
Sullair backs this new technology with a five-year high efficiency filter grades.
warranty on the housing and a five-year warranty on
performance, provided the element is changed annually. Combination Filters: MPHC
This package combines high efficiency and odor-removal
type filters in one housing.

2
New Sullair Filtration Technology

New Sullair Filtration Technology Old Filtration Technology

Sullair compressed air filters use very Ordinary compressed air filters have
little energy as they have a low always consumed too much energy,
resistance to air flow. Advancements as they are by design, a restriction to
such as deep bed pleating, graded air flow. During their working life, this
density media and an oleophopic restriction increases dramatically, and
coating have led to a high performance over time, can consume more energy
filter element with low initial energy than they are worth. As service life is
costs. Differential pressure starts low dependent upon differential pressure,
and stays low throughout its life. most manufacturers recommend a
Service life is no longer dependent on replacement filter element between
differential pressure, but is based on 7 psi (500 mbar) and 10 psi (700 mbar)
annual filter element change, backed differential. This adds up to a massive
up with a one-year air quality 3.5% extra in compressor energy costs.
guarantee.

Filter Life Comparison

Data shown is for the SCH filter.

Differential Pressure (mbar)

Differential Pressure (psi)

700 10

500

350 5
300 4.5

200 3
100 Starts Low and Stays Low
1
0 0
Months 1 6 12

Sullair Filter Life Curve

Differential Pressure (mbar)

Differential Pressure (psi)

700 10

500

350 5
300 Wasted Energy 4.5

200 3
100 1
0 0
Months 1 6 12

Ordinary Filter Life Curve

3
The World’s Most Efficient Filter Element

Sullair’s new range of compressed air filters have been

designed from the outset to meet current and forthcoming
requirements for compressed air quality. Using aerospace
technology, Sullair has optimized the flow path through
the housing and element, significantly reducing air
turbulence and pressure losses. Providing an optimal
flow path is key to reducing system operating costs.

Full Flow Inlet

Inlet conduit matches inlet
diameter, reducing pressure
drop and running costs.

Even Flow Distribution

Air flow is distributed evenly
throughout the filter element
using a flow distributor.

Conical Air Diffuser

Air flow distribution is further
improved by elimination of
turbulence.

The Filtration Process

Deep Bed Pleating

For particle and aerosol removal, deep bed pleating
provides 450% more filter media than an ordinary element,
giving a larger filtration area, lower flow velocities,
Nanofiber
Nanofiber filtermedia
filter media
increased dirt holding capacity, lower running costs and
a more compact filter element. Graded density further
improves filter life and overall performance.

Oil Vapor Removal

While mechanical filtration is capable of removing
extremely fine liquids and solid particles, it cannot remove
gaseous contaminants such as oil vapor or odors. To
efficiently remove these vapors, Sullair SCC filters employ
absorption techniques. using a deep bed of activated Activated carbon
Activated carbon
4 carbon.
 Aerospace Turning Vanes
Turning vanes effectively
direct air flow into the filter
element.

Air Stabilizers
Smooth outlet air flow.

Special Filter Media

Oleophopic nanofiber filter
media actively repels oil and
water to reduce pressure
drop and keep running
costs to a minimum.

High Efficiency Drainage Layer

Ensures coalesced liquids are
removed quickly and efficiently.
Filter media actively repels oil
and water

International Patents Pending

No Wet Band Formation

Allows 40% more air flow
through a smaller filter element.

Drainage Ribs
Filter housing and element
integrate to provide capillary
action which greatly improves
liquid drainage. Interaction
between housing and element
also ensures maximum
coalescing performance
is achieved at all times.

5
Sullair Advanced Filter Housings

Filter Connections
More port sizes are available
to match both pipe size and
system flow rate giving additional
customer choice.

Fully Corrosion Protected

Alocrom and dry powder epoxy
coated for full corrosion protection.

Left: No corrosion with Alocrom treatment

Right: Rapid corrosion of untreated aluminum

Incident Monitor
Used to indicate premature high
differential pressure.

Compact and Lightweight Fixing Clamp

Advanced housing and element design Joins two filters and is a wall
have also provided a smaller, more mounting bracket in one.
compact and lightweight filter which
is quick, easy and clean to maintain.

“Clean Change” Filter Element

Element changes are now easy
and do not require the user to
touch the contaminated element
during annual element change.

Minimal Service Clearance

Choice of Drains Space saving design minimizes
Manual or float drain standard, optional service clearance and allows
SCD Zero Air Loss drain available. installation in confined spaces.
Easy connection with standard fittings
via 1/2" threaded drain port.

6
 Air Quality Standards ISO 8573.1 Classes
Solid Particle
Maximum number of Pressure Oil
Particle size (in microns) of some common substances Class particles per m3 Dewpoint (incl. vapor)
Fumes °F mg/m3
0.1-0.5 0.5-1 1.0-5
Tobacco Smoke micron micron micron
Smog
1 100 1 0 -94 0.01
Oil Aerosols
2 100,000 1,000 10 -40 0.1
Bacteria
3 - 10,000 500 -4 1.0
Ash
4 - - 1,000 37 5.0
Dust
5 - - 20,000 45 -
Fog
6 - - - 50 -
Pollen
0.01 0.1 1.0 10.0 100.0

Sullair air compressor

General Purpose Protection
Air quality to ISO 8573.1
Class 3 (dirt), 3 (oil)
Particles <1 micron
Oil content <0.5 ppm
aftercooler SCF filter

Sullair air compressor

Oil-Free Air
Air quality to ISO 8573.1
Class 2 (dirt), 2 (oil)
Particles <0.01 micron
Oil content <0.01 ppm
aftercooler SCF SCH filters

Sullair air compressor

Critical Applications
Air quality to ISO 8573.1
Class 2 (dirt), 1 (oil)
Particles <0.01 micron
Oil content <0.003 ppm
aftercooler SCF SCH SCC filters

Sullair
Sullair air compressor refrigerated dryer Low Dew Point
Air quality to ISO 8573.1
Class 2 (dirt), 4 (water), 1 (oil)

aftercooler SCF filter SCH and SCC filters

Sullair regenerative
dryer Extremely Low Dew Point
Sullair air compressor Air quality to ISO 8573.1
Class 2 (dirt), 2 (water), 1 (oil)
Pressure dew point -40°F (40°C)

SCF and SCR filters

aftercooler SCH filters (for more surface area)

from main line

Point-Of-Use Filtration

instruments
process
air

SCF SCH
SCF MPHC
7
SCF
Specifications:
Sullair SCF, SCH, SCR, SCC and SCHR
Filters
Model Capacity Inlet/Outlet Dimension (in.) Weight
SCF, SCH, SCR
SCC, SCHR @ 100 psig Connection A B C D E (lbs)
20 21 3/8" 3.0 7.2 6.0 - 4.0 0.9
40 42 1/2" 3.8 9.3 7.9 - 4.0 2.2
65 64 3/4" 3.8 9.3 7.9 - 4.0 2.2
125 127 1" 5.1 10.8 9.2 - 4.0 4.9
235 233 1-1/2" 5.1 14.3 12.7 - 4.0 5.7
340 339 1-1/2" 6.7 17.0 15.1 - 4.0 10.0
465 466 2" 6.7 20.6 18.7 - 4.0 11.6
700 699 2" 6.7 20.6 18.7 - 4.0 11.6
910 911 3" 8.1 25.3 22.9 - 4.0 22.0
1315 1314 3" 8.1 32.8 30.4 - 4.0 26.4
2120 2119 4" 16.5 46.2 43.1 - 4.0 98.0
MPHC 13 13 1/4" 3.0 5.3 5.3 5.3 2.8 2.2
MPHC 27 27 3/8" 3.5 6.3 6.3 6.3 3.8 2.7
MPHC 53 53 1/2" 3.5 6.3 7.6 6.3 5.1 3.1
MPHC 84 84 3/4" 4.8 9.8 9.8 9.8 6.8 7.1
MPHC 140 140 1" 4.8 9.8 13.8 9.8 10.8 8.2
MPHC 180 180 1-1/4" 4.8 13.8 13.8 13.8 10.8 8.4
Note: The SCC grade filter will not remove CO/CO2 or other toxic gases or fumes.
Consult factory for additional inlet/outlet connection sizes.

SCF SCH SCC SCR SCHR

Maximum operating pressure - with autodrain (psig) 232 232 232 232 232
Maximum operating pressure - with manual drain (psig) 290 290 290 290 290
Maximum operating temperature - with autodrain 176°F 176°F 176°F 176°F 176°F
Maximum operating temperature - with manual drain 212°F 212°F 212°F 212°F 212°F
Minimum operating temperature 35°F 35°F 35°F 35°F 35°F
Standard drain type auto auto manual manual manual

Pressure Correction Factor

Line Pressure psig 15 29 44 58 73 87 100 116 131 145 160 174 189 203 218 232
Correction Factor 0.38 0.53 0.65 0.76 0.85 0.93 1.00 1.07 1.13 1.19 1.25 1.31 1.36 1.41 1.46 1.51
Line Pressure barg 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Correction Factor 0.38 0.53 0.65 0.76 0.85 0.93 1.00 1.07 1.13 1.19 1.25 1.31 1.36 1.41 1.46 1.51

Grade 20 Grade 40-1315 Grade 2120 MPHC

• A • • A • • A •
• A • •

• •
•
• •
D
•

C
B C B
•

• • • •
B
C C
Clearance to E Clearance to E
change element change element

• • •

Clearance to E
Clearance to E change element
change element
8
Specifications:
Sullair PF, PR, PC and PH Welded Housing
Filters
Model Capacity Air In/Out Dimensions (in.) Drain Weight (lb.)
@100 psig A B C D Port (in.)
PF/PR-600 600 2" FLG 17-3/4 35 8-3/4 21 1/2 165
PF/PR-1200 1200 3" FLG 17-3/4 37-1/2 9-1/2 21 1/2 171
PF/PR-1600 1600 3" FLG 20 39-3/4 10-5/8 21 1/2 195
PF/PR-2100 2100 4" FLG 20 39-3/4 10-5/8 21 1/2 267
PF/PR-2750 2750 4" FLG 20 39-3/4 10-5/8 21 1/2 270
PF/PR-4200 4200 6" FLG 24 45 13-1/4 21 1/2 424
PF/PR-7000 7000 8" FLG 29-1/2 54 12-3/4 21 1 720
PF/PR-11000 11000 10" FLG 29-1/8 60-1/2 16 26 1 1040
PF/PR-16500 16500 12" FLG 39-3/8 66-5/8 18-1/2 28 1 1610
PC/PH-600 600 2" FLG 12 37-1/4 6 22 1/2 90
PC/PH-1200 1200 3" FLG 15-3/8 43-3/4 8-1/4 26 1/2 158
PC/PH-1600 1600 3" FLG 20 49-1/2 10-1/4 21 1/2 289
PC/PH-2100 2100 4" FLG 20 49-1/2 10-1/4 21 1/2 304
PC/PH-2750 2750 4" FLG 20 49-1/2 10-1/4 21 1/2 320
PC/PH-4200 4200 6" FLG 22-3/4 50-1/2 12-3/4 21 1/2 451
PC/PH-7000 7000 8" FLG 29-1/2 54 12-3/4 21 1 720
PC/PH-11000 11000 10" FLG 29-1/8 60-1/2 16 26 1 1040
PC/PH-16500 16500 12" FLG 39-3/8 66-5/8 18-1/2 28 1 1610
Dimension “D”: Distance required for element removal
Note: The PC grade filter will not remove CO/CO2 or other toxic gases or fumes.

PF/PR PH PC
Maximum operating pressure 200 psig (14 barg) 200 psig (14 barg) 200 psig (14 barg)
Maximum operating temperature 250°F 150°F 86°F
Minimum operating temperature 35°F 35°F 35°F
Operating pressure differential fully saturated 2.0 psig 3.0 psig 4.5 psig

Pressure Correction Factor

Line Pressure psig 25 40 50 60 75 90 100 110 125 140 150 160 175 200
Correction Factor 0.49 0.62 0.69 0.76 0.86 0.95 1.0 1.04 1.1 1.17 1.21 1.25 1.31 1.4
Line Pressure barg 1 2 3 5 7 9 11 13
Correction Factor .038 0.53 0.65 0.85 1.0 1.13 1.25 1.36

PC/PH* PF/PR*
• A • • A •

• •

C C

• •

B
B

•
*Consult factory for filter drawings above 4200 cfm
• •
D
•
D 9
Sullair Air Quality Guarantee
Two Levels of Air Quality Maximum remaining oil aerosol content is 0.01 parts per
million by weight (ppm/w) @ 70°F, including oil vapor. The
Sullair recognizes that the air from this Sullair System meets the most stringent ISO
requirements for air quality vary standard (ISO 8573.1, Class 1) for air quality.
according to each compressed air
application. For this reason, Sullair The Sullair Critical Air Quality Guarantee.
provides compressed air Systems that The compressed air from this Sullair System
achieve two distinct levels of air quality exceeds the ISO standard (ISO 8573.1, Class 1) for
and a guarantee for each. air quality with the use of the SCC or PC filter. The
System includes a Sullair compressor, Sullair dryer,
The Sullair System. and Sullair SCF, SCH, and SCC; or PF, PH, and PC
The Sullair System matches a Sullair compressor, filters. The odor-free compressed air from this system
a Sullair dryer and Sullair filters. Sullair assures that contains particulates no larger than 0.01 micron, including
its System will meet specific performance levels water and oil aerosol content of 0.01 parts per million by
throughout its operational life. We offer a one-year weight (ppm/w) @ 70°F. The remaining oil vapor content is
test/review period, backed by a purchase refund less than 0.003 ppm/w.
guarantee, to verify the performance of the Sullair System.
These Systems are not intended to remove carbon monoxide, methyl
isocyanate or other noxious, corrosive or toxic gases, vapors or fumes.
Select the System. The system does not provide breathing air.
Select the air quality level to meet your plant air or process
requirements. You can be assured that the quality of air
from the Sullair System you specify will remain consistent
for the life of the equipment. Sullair guarantees it... and
that’s as good as gold.
by SULLAIR
The Sullair Oil-Free Air Quality Guarantee.
The System consists of a Sullair compressor, Sullair dryer,
and Sullair SCF and SCH or PF/PH filters. The compressed
air from this system contains particulates no larger than .01
micron, including coalesced liquid water and lubricants.

For more information on Sullair products and services,

please contact your local Sullair distributor.

Sullair Corporation
3700 East Michigan Boulevard, Michigan City, IN 46360
Telephone: 1-800-SULLAIR or 1-219-879-5451
www.sullair.com

Sullair Corporation, a Business Unit of Hamilton Sundstrand,

a United Technologies Company.
© Copyright 2007 Sullair Corporation. All rights reserved.
The color green is a registered trademark of Sullair Corporation.
Specifications subject to change without notice.
CF01E 0710R15

The paper used in printing this literature was manufactured using recycled fiber, either
pre-consumer or post-consumer waste, therefore less harmful to the environment
because less virgin fiber is used, thereby reducing tree harvesting, water usage, energy
consumption, emission of greenhouse gases and pollution.