0% found this document useful (0 votes)
56 views3 pages

Delo XLD Multigrade: High Performance Multigrade Diesel Engine Lubricant

Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
0% found this document useful (0 votes)
56 views3 pages

Delo XLD Multigrade: High Performance Multigrade Diesel Engine Lubricant

Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 3

Delo® XLD Multigrade

High Performance Multigrade Diesel Engine Lubricant


Product Data Sheet

Customer benefits Product features:

• Reduced maintenance costs Synthetic-Blend, High


Highly effective detergent additive system minimizes piston crown land deposits Performance Diesel engine
which can lead to damaging bore polishing. High base number minimizes oil designed to meet the
corrosive wear in those areas where medium to high sulphur fuel is still performance requirements
encountered of high output, European
Euro II and Euro III type
• Maximizes engine life
Proven metallo-organic anti-wear additive system reduces wear in severe service
diesel engines. Also
by forming a protective layer on all metal contact surfaces. Wide-range SAE suitable for Euro IV or V
10W-40 multigrade viscosity ensures reduced friction at start-up and maximum compliant diesel vehicles
lubricity at high operating temperatures. not fitted with diesel
particulate filters.
• Long oil drain intervals
Formulated from an
Exceptional high temperature stability minimizes degradation that leads to
optimized synthetic and
sludge formation and oil thickening, and provides oil service intervals up to
mineral base oil blend plus
the maximum levels recommended for Euro II and Euro III type engines.
specialized additives to
• Low oil consumption provide the maximum
Highly shear-stable viscosity index improvers prevent oil flow through the piston oil drain intervals
rings by maintaining oil viscosity in the high temperature ring belt area, while
recommended for Euro II
special low volatility base fluids minimize evaporative oil loss.
and Euro III compliant
engines.
Applications

• Naturally aspirated and turbocharged high speed, four-stroke diesel engines of


European origin, including low emission Euro II and Euro III type engines

• Commercial road transport in light, medium and heavy-duty service

• Off-highway vehicles

• Also suitable, at appropriate drain intervals, for Euro IV or V compliant diesel


vehicles not fitted with diesel particulate filters

A company product

All trademarks are property owned by Chevron Intellectual Property LLC.


Performance Standards

• ACEA E4-08, E7-08


• API CI-4
• Deutz DQC-III- 10
• MAN M 3277
• Daimler MB-Approval 228.5
• Renault RLD-2/RXD
• Scania LDF-2
• Volvo VDS-3
• Mack EO-N Premium Plus
• MTU Category 3

Service Considerations

European diesel engine manufacturers recommend oil drain intervals of up to


100,000 km where ACEA E4 oils are used in Euro II and Euro III type engines.
However, such extended oil drain intervals should only be applied where service
conditions match ideal European duty cycles and fuel sulfur levels. In most areas
in which Caltex brand products are sold this is unlikely.

The higher fuel consumption, higher fuel sulfur levels and more severe operating
conditions (such as dustiness, higher loads, and rougher surfaces) generally
encountered in these areas mandate, for all diesel engine oils, reduced service
intervals versus those used in more ideal environments. If operators adjust drain
intervals to compensate for these service factors, Delo XLD Multigrade can deliver
proportionate benefits in terms of lower maintenance and lower engine life
cycle costs.

For vehicles fitted with exhaust clean up devices of the diesel particulate trap
type, lubricants conforming to low-SAPS (sulfated ash, phosphorus and sulfur)
requirements should be employed.

A Chevron company product


All trademarks are property owned by Chevron Intellectual Property LLC.
Delo® XLD Multigrade
High Performance Multigrade Diesel Engine Lubricant

continued

Product specifications

DELO XLD MULTIGRADE

KEY PROPERTIES RESULTS


SAE Grade 10W-40
Base Number,

D2896, mg KOH/g 12.5


D4739, mg KOH/g 11.5
Sulfated Ash, m % 1.6
Phosphorus, m % 0.14
Viscosity,

mm2/s @ 40°C 98.0


mm2/s @ 100°C 14.2
Viscosity Index 148
Zinc, m % 0.15

This bulletin was prepared in good faith from the best information available at the time of issue. While the values and
characteristics are considered representative, some variation, not affecting performance, can be expected. It is the
responsibility of the user to ensure that the products are used in the applications for which they are intended.

Produced by Chevron Lubricants; Africa, Middle East and Pakistan.

Environment, Health and Safety Information is available on this product in the Material Safety Data Sheet (MSDS) and
Customer Safety Guide. Customers are encouraged to review this information, follow precautions and comply with laws
and regulations concerning product use and disposal. To obtain a MSDS for this product, visit www.caltexoils.com.

For more information, go to www.chevronlubricants.com

A Chevron company product DELOXLD MLTIGRDE/GULF+SA/PDSv1_01/10/2012


All trademarks are property owned by Chevron Intellectual Property LLC. © 2012 Chevron Lubricants; Africa, Middle East and Pakistan. All Rights Reserved.

You might also like