Republic of the Philippines

Department of Education
Region III - Central Luzon
SCHOOLS DIVISION OF PAMPANGA
BACOLOR SOUTH DISTRICT
SAN ANTONIO ELEMENTARY SCHOOL-B
Bulaon Resettlement, City of San Fernando (P)

THIRD QUARTER EXAMINATION

TECHNOLOGY AND LIVELIHOOD EDUCATION
IA 6

Name: _____________________________________ Score: ____________

Section: _____________ Date_______________ Parent’s Signature
________________

I. MULTIPLE CHOICES.
Direction: Encircle the letter of the correct answer.

1. A kind of stain that is easiest to apply on wood.

A. Spirit stain B. Oil stain C. Fillers D. Paint

2. A kind of varnish that is not waterproof.

A. Paint B. Enamel C. Shellac D. Lacquer

3. It is the process of whitening or removing the colour by sunlight exposure.

A. Pyrography B. Bleaching C. Preserving D.
Dyeing
4. Which of the following is NOT an importance of decorating products?
A. It can enhance the costumers to buy the product C. It can bring more
capital
B. It improves the quality of product D. It can increase
the sale.
 5. To compute the unit ______ of each finished article, add the cost of materials and
cost of labor.
A. Cost B. Earned C. Gain D. Revenue

6. In this market trend on products, it can reach the consumers faster through the
means of land, air and sea transportation spreading promotion, feedbacks even in
the farthest region of the country.
A. Direct Marketing C. Radio, Television and Internet Advertising
B. Advertising in Print Media D. Distributing Products via Transport System

7. Which of the following market trends on products made of bamboo, wood or metal
show through demonstrations, trade exhibits and other public venues in which
popularly done by the producers to motivate consumers or buyers about the
products?
A. Direct Marketing C. Radio, Television and Internet
Advertising
B. Advertising in Print Media D. Distributing Products via Transport
System

8. Which of the following activity is done through advertisements in newspapers,

magazines and flyers about the product?
A. Direct Marketing C. Radio, Television and Internet
Advertising
B. Advertising in Print Media D. Distributing Products via Transport
System

9. Which of the following is a modern way of endorsing product?

A. Direct Marketing C. Radio, Television and Internet
Advertising
B. Advertising in Print Media D. Distributing Products via Transport
System

10. . When you mixed the dye (tina) with Petroleum, what could be the result?
A. Oil Stain B. Soil Stain C. Paper Stain D. Plastic Stain

11. For the finished product to have beautiful color and a good protector of materials,
which of the following will you use?
A. DyeB. Paint C. Lacquer D. Sandpaper

12. Which of the following is the process of making on the outer parts of any shape,
object or any figure by the use of lines?
 A. Outlining B. Shading C. Drawing D. Sketching
13. What method of enhancing a product is used when creating shades of light and
dark patterns that creates illusions of space and distance?
A. Outlining B. Shading C. Drawing D. Sketching

14. This marketing strategy encourages online interaction between your customers
and your business using various social networking sites.
A. Internet B. Television C. Smart phones D. Social Media

15. This marketing strategy encourages you a variety of different ways to market
your product or service on a website or by email.
A. Internet B. Television C. Smart phones D. Social Media

16. This marketing strategy encourages capturing more audience time than any
other media and is targeted at home audiences.
A. Internet B. Television C. Smart phones D. Social Media

17. It allows for marketing tactics that let you reach customers directly on their
mobile devices.
A. Radio B. Television C. Smart phones D. Social Media

18. The total expenses in making a certain product are PHP 150. If it is sold at PHP
200, how much is the interest profit that was gained?
A. 33% B. 50% C. 25% D. 133%

19. Which of the following are recyclable materials?

A. Plastic and cans C. Plastic, bottles and ice cream
container
B. Paper and bottles D. All of these

20. Which of the following cannot be recycled?

A. Milk cartons C. Glass container
B. Plastic water bottle D. Napkin

21. All of the following can’t be recycled EXCEPT.

A. Bottle of mineral water C. Vegetable waste
B. Food remain D. Gills of fish

22. Why is it important to manage our waste materials?

A. Because unmanaged waste causes diseases that leads to death.
B. Because it is or social responsibility to cooperate with the program.
C. Because cleanliness is next to godliness
 D. Because increasing waste threatens our environment and everything that lives
in it.

23. Why should we reduce, reuse and recycle plastic materials?

A. Because it is the most abundant source of waste in the environment.
B. Because they are easier to reduce, reuse and recycle than other types of
waste.
C. Because plastic wasted do not decompose.
D. Because they are difficult to be reproduced
24. What is the importance of recycling?
A. Recycling conserves natural resources. C. Recycling makes
people busy
B. Recycling is fun. D. Both A and B

25. How can one recycle glass/plastic bottle or a milk/juice carton?

A. Remove the cap before recycling.
B. Smash it down as much as possible before recycling.
C. Shred before recycling
D. None of the above

26. What is important to keep in mind when recycling a container that once
contained food or beverage?
A. Make sure that containers are closed tightly so no residue will leak out.
B. Absolutely nothing
C. Rinse out any excess residue before recycling.
D. Both b and C

27. In classifying waste materials what are the things we have to consider?
A. The physical appearance of the materials.
B. The common characteristics of the materials.
C. The color of the materials
D. The size of the materials
28. What do you think will happen if people will not do the recycling method of waste
materials?
A. The country will become rich. C. Problems about waste disposal will
not be solved.
B. People will have more money. D. There will be no problem.
II. Direction: Choose the tool needed to take care of most electrical jobs from inside the
box by writing the letter of the correct answer on the space before the number.

______29.It is used to check voltages and verify that circuits are indeed “live”.
______30.It is used to secure boxes equipped with nail-on brackets to stud in home and
also needed to drive straps when adding new wiring in a home.
______ 31.They are used to cut the insulation off of the wire.
______ 32.These pliers are the do-it –all pliers in which they cut, twist wires together,
and grip wires for pulling.
______ 33.It looks like a plus sign and used to install Philips-head screws.

III. Direction: Write C if the statement is correct, write W if the statement is wrong.

_____34.Always keep extension cords tangle-free and contained inside a large plastic
bucket when they’re not in use.
_____35. An experienced electrician can do some repairs of electrical appliances even
with wet hands.
_____36. To test the hotness of an electric iron, you can use back part of your hand.
_____37. Press the center of a foot-long strip of duct tape onto the middle of the bulb
when removing hard-to-remove light bulb.
_____38. Bring the deteriorated washer as the template in replacing the broken washer
of a leaky faucet.

IV. Direction: Write (likes) if ideas was correct and

(dislikes) if not.

_____ 39.In improving furniture you must consider the time, money and materials.
_____40.My teacher was asked me to do some improvements of my project I will
accept it positively and I will do it right away.
_____ 41.To improve the parts of the gadgets/furniture, tools and materials are not
important.
_____ 42.Tools and materials are also needed in improving the furniture.
V. Direction: Put a check (/) if proper sorting of waste materials and X if not.
____ 43.Things used everyday should be far the work place.
____44. Remove unnecessary items or materials from the work place.
____ 45.Decide what is necessary and what is unnecessary inside the work place.

V. Direction: Put heart if the policies in making a project plan is

being considered in each statement, and star if it is not.
_____ 46. Itemize the steps to do before you start the project.
_____ 47. Consider the benefits that we can get in making the project.
_____ 48. Use expensive materials.
_____ 49. Know the proper and appropriate tools/ equipment needed.
_____ 50. Identify the materials needed.

Prepared by:

MAE ANNE C. APOSTOL

Teacher I
Approved :

FE G. BOGNOT
Principal III
 THIRD QUARTER EXAMINATION
TECHNOLOGY AND LIVELIHOOD EDUCATION
IA 6

KEY TO CORRECTION
1. B 26. D
2. C 27.B
3. B 28.C
4. C 29.C
5. A 30.E
6. D 31.G
7. A 32.I
8. B 33.O
9. C 34.C
10. A 35.W
11. B 36.W
12. A 37.C
13. B 38.C
14. D 39.
15. A 40.
16. B 41.
17. C 42.
18. A 43. X
19. D 44. /
20. D 45. /
21. A 46.
22. D 47 .
23. C 48 .
24. A 49.
25. D 50.