UTFT

Arduino and chipKit Universal TFT display library

Supported display modules

& LCD Controllers

http://electronics.henningkarlsen.com (C)2013 Henning Karlsen

These display modules have been tested, and works with the UTFT library. Other modules
may work as long as they have one of the supported controllers.

Supplier: ITead Studio

Website: http://imall.iteadstudio.com/
Module Model for UTFT() Controller Notes
ITDB02-1.8SP ITDB18SP ST7735 5V only1
ITDB02-2.2SP ITDB22SP HX8340-B(N) Retired, 5V only1
ITDB02-2.2 ITDB22 HX8340-B(T)
ITDB02-2.4 ITDB24 ILI9325C Retired
ITDB02-2.4D ITDB24D ILI9325D Retired
ITDB02-2.4DWOT ITDB24DWOT ILI9325D Retired
ITDB02-2.4E ITDB24E_8 S6D1121 8bit mode
ITDB02-2.4E ITDB24E_16 S6D1121 16bit mode
ITDB02-2.5H ITDB25H S1D19122 Retired
ITDB02-2.8 ITDB28 ILI9325D
ITDB02-3.2 ITDB32 HX8347-A Retired
ITDB02-3.2WC ITDB32WC ILI9327 Retired
ITDB02-3.2S ITDB32S SSD1289
ITDB02-3.2WD ITDB32WD HX8352-A
ITDB02-4.3 ITDB43 SSD1963
ITDB02-5.0 ITDB50 SSD1963

Supplier: ElecFreaks
Website: http://www.elecfreaks.com/store/
Module Model for UTFT() Controller Notes
TFT01-1.8SP TFT01_18SP ST7735S May require external power
TFT01-2.2 TFT01_22 S6D0164
TFT01-2.2SP TFT01_22SP ILI9341 May require external power
TFT01-2.4 TFT01_24_8 ILI9325D 8bit model, Retired
TFT01-2.4 TFT01_24_16 ILI9325D 16bit model, Retired
TFT01-2.4 v1.2 TFT01_24R2 S6D1121
TFT01-2.8 TFT01_28 ILI9325D
TFT01-3.2 TFT01_32 SSD1289
TFT01_3.2W TFT01_32W ILI9327 Retired
TFT01_3.2WD TFT01_32WD HX8352-A
TFT01-4.3 TFT01_43 SSD1963
TFT01-5.0 TFT01_50 SSD1963
TFT01-7.0 TFT01_70 SSD1963

Supplier: NKC Electronics

Website: http://store.nkcelectronics.com/
Module Model for UTFT() Controller Notes
RGB LCD 65K color module LPH9135 PCF8833

Supplier: Electronics Lee

Website: http://stores.ebay.com/electronics-lee
Module Model for UTFT() Controller Notes
3.2” TFT LCD Arduino Shield ELEE32_REVA2 SSD1289 Uses 16bit latched mode3
Arduino Shield not supported
Revision A on chipKit or Arduino Due
3.2” TFT LCD Arduino Shield ELEE32_REVB SSD1289 8bit mode4
Arduino Shield not supported
Revision B on chipKit or Arduino Due

Supplier: General Electronics-Tech

Website: http://www.geeetech.com/
Module Model for UTFT() Controller Notes
2.2" TFT LCD GEEE22 HX8340-B(T)
TFT 2.4" With SD Touch Module GEEE24 ILI9320 5V only1
TFT 2.8" With SD Touch Module GEEE28 ILI9320 5V only1
TFT 3.2" With SD Touch Module GEEE32 SSD1289

1
May work on 3.3v boards (chipKit and Arduino Due) but this has not been verified
2
Changed from INFINIT32
3
Use UTFT myGLCD(ELEE32_REVA,A1,A2,A0,A3,A5); to initialize
4
Use UTFT myGLCD(ELEE32_REVB,A1,A2,A0,99); to initialize

Page 1
Supplier: Coldtears Electronics
Website: http://stores.ebay.com/coldtears-electronics-store
Module Model for UTFT() Controller Notes
2.2" TFT LCD Module CTE22 S6D0164 Basic support only5
2.8" TFT LCD Module CTE28 ILI9325D Basic support only5
3.2" TFT LCD Module CTE32 SSD1289 Basic support only5
3.2" (480x320) TFT LCD Module CTE32HR ILI9481 Basic support only5
3.2" Wide TFT LCD Module CTE32W HX8352-A Basic support only5
3.5” IPS TFT LCD Module CTE35IPS R61581 Basic support only5
4.0” TFT LCD Module CTE40 ILI9486 Basic support only5
5.0" TFT LCD Module CTE50 SSD1963 Basic support only5
7.0" TFT LCD Module CTE70 SSD1963 Basic support only5

Supplier: Watterott electronic

Website: http://www.watterott.com/
Module Model for UTFT() Controller Notes
MI0283QT-9A MI0283QT9 ILI9341 Only tested on Arduino Uno

5
UTFT does not make use of the on-board Font and Icon Flash chip.

Page 2
If you are unsure which module you have you can try these model codes for the
supported controllers instead:

Supported mode
Controller Model for UTFT() 8bit 16bit Serial
HX8340-B(N) HX8340B_S 
HX8340-B(T) HX8340B_8 
HX8347-A HX8347A 
HX8352-A HX8352A 
ILI9320 ILI9320_8 
ILI9320_16 
ILI9325C ILI9325C 
ILI9325D ILI9325D_8 
ILI9325D_16 
ILI9325D_16ALT6 
ILI9327 ILI9327 
ILI9341 ILI9341_S4P7 
ILI9341_S5P8 
ILI9481 ILI9481 
ILI9486 ILI9486 
PCF8833 PCF8833 
R61581 R61581 
S1D19122 S1D19122 
S6D0164 S6D0164 
S6D1121 S6D1121_8 
S6D1121_16 
SSD1289 SSD1289 
SSD1289_8 
SSD1289LATCHED9 LATCHED
SSD1963 SSD1963_480 
SSD1963_800 
SSD1963_800ALT10 
ST7735 ST7735 
ST7735S ST7735S 

6
Alternative initialization for some 2.8” display modules
7
Use this for 4 Pin serial modules
8
Use this for 5 Pin serial modules
9
Currently only supported on 5v Arduino board, and not on chipKit or Arduino Due
10
Alternative initialization for 7” displays

Page 3