Scribd
Upload
303 views1 page

Kathrein 86010046 PCA

The Portable Control Adapter (PCA) allows remote control of Tower Mounted Amplifiers (TMAs) via an 8-pin connector. It provides 24V DC and 14V DC power to the remote control units (RCUs)/TMAs and can support up to 27 RCUs/3 TMAs within 200m. The PCA connects to a PC via USB to control the RCUs/TMAs using an HDLC protocol and has overcurrent protection, current monitoring, and an operating temperature range of 0-55°C.

Uploaded by

gab man
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
303 views1 page

Kathrein 86010046 PCA

The Portable Control Adapter (PCA) allows remote control of Tower Mounted Amplifiers (TMAs) via an 8-pin connector. It provides 24V DC and 14V DC power to the remote control units (RCUs)/TMAs and can support up to 27 RCUs/3 TMAs within 200m. The PCA connects to a PC via USB to control the RCUs/TMAs using an HDLC protocol and has overcurrent protection, current monitoring, and an operating temperature range of 0-55°C.

Uploaded by

gab man
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 1

Portable Control Adapter (PCA)

For Remote Control Unit (RCU)


For Tower Mounted Amplifier (TMA)

Portable Control Adapter


Type No. 86010046
Connector * to RCU/TMA 1 x 8-pin connector according to IEC 60130-9, female,
conforming to AISG RF-connector (SMB male)
Input voltage of PCA 24 V DC
Output voltage to RCU’s/ AISG female pin 6 (24 V DC): 24 V DC ±10%
TMA’s AISG female pin 1 (12 V DC): 14 V DC ±7%
RF male (at 24 V DC): 24 V DC ±10% ***
RF male (at 12 V DC): 14 V DC ±7% ***
Output power AISG female pin 6 (24 V DC)
(power supply to RCU’s/ without load on pin 1 (12 V DC) and on RF-plug: ≤ 60 W
TMA’s) AISG female Pin 1 (12 V DC)
with max. 30 W load on pin 6 (24 V DC) and/or on RF plug: ≤ 30 W
Current monitoring Per branch (12 V, 24 V, RF): 10 – 2500 mA
measurement level
Over-current protection Per branch (12 V, 24 V, RF): < 2500 mA
Interface to RCU/TMA RS 485 / power supply / RF connector (SMB male)
Protocol to RCU/TMA HDLC hex-coded command set, conforming to AISG 1.1 and 3GPP / AISG 2.0
Interface to PC USB 1.1/2.0
Max. number of RCU’s/TMA’s 27/3 pcs., depending on system configuration and length of control cable
Max. length of control cable 200 m / 9 RCU’s (in daisy chain configuration)
150 m / 6 RCU’s (in splitter configuration)
Weight 535 g (incl. external power adapter)
Temperature range 0 ... +55 °C ambient temperature
Height x width x depth 40 mm x 95 mm x 160 mm
External power supply ** Input: 90 – 264 V AC, 47 – 63 Hz
24 V DC / 3.0 A
* Tightening torque for fixing the connector must be 0.5 – 1.0 Nm (‘hand-tightened’).
The connector should be tightened by hand only!
** If powered via AISG-interface, no external power supply is required.
*** Switchable with software

Certificate: CE
FCC part 15 class B
UL (for external power adapter)
Standards: EN 60950-1
EN 55022
EN 55024
System requirements Windows 2000; Windows XP, Vista, Win7
for PCA Software: (32 bit version)
Scope of supply: PCA
External power supply (24 V DC / 70 W)
USB cable
AC power cable
CD-ROM with PCA software, drivers and manual
Installation guide
Subject to alteration.
936.2733/f

All specifications are subject to change without notice.


The latest specifications are available at www.kathreinusa.com
86010046 Page 1 of 1

Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082
Phone: 214.238.8800 Fax: 214.238.8801 Email: info@kathrein.com

You might also like