Scribd
Upload
35 views17 pages

CSE 121: Electrical Circuits: Norton'S Theorem

Here is a C program to solve the given circuit problem to find the Norton equivalent circuit: #include <stdio.h> int main() { float R1 = 2, R2 = 3, R3 = 4, I1 = 1, I2 = 2, V1 = 5, V2 = 10; float Rn, In; // Step 1) Remove portion of network between a-b terminals printf("Portion of network between a-b terminals is removed.\n"); // Step 2) Mark the remaining two terminal network printf("The remaining two terminal network is marked between a-b.\n"); // Step 3) Calculate Rn by setting all sources

Uploaded by

Nahid Hasan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
35 views17 pages

CSE 121: Electrical Circuits: Norton'S Theorem

Here is a C program to solve the given circuit problem to find the Norton equivalent circuit: #include <stdio.h> int main() { float R1 = 2, R2 = 3, R3 = 4, I1 = 1, I2 = 2, V1 = 5, V2 = 10; float Rn, In; // Step 1) Remove portion of network between a-b terminals printf("Portion of network between a-b terminals is removed.\n"); // Step 2) Mark the remaining two terminal network printf("The remaining two terminal network is marked between a-b.\n"); // Step 3) Calculate Rn by setting all sources

Uploaded by

Nahid Hasan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 17

CSE 121 : Electrical Circuits

NORTON’S THEOREM
NETWORK THEOREMS

1. SUPERPOSITION THEOREM

2. THEVENIN’S THEOREM

3. NORTON’S THEOREM

4. MAXIMUM POWER TRANSFER THEOREM


NORTON’S THEOREM
STATEMEMNT OF NORTON’S THEOREM.

Any two-terminal linear bilateral dc network can be replaced by


an equivalent circuit consisting of a current source and a parallel
resistor, as shown in Fig. 9.59.
NORTON’S THEOREM
STEPS OF NORTON’S THEOREM.

1. Remove that portion of the network across which the Norton equivalent circuit is
found.
2. Mark the terminals of the remaining two-terminal network.

DETERMINATION OF RN:

3. Calculate RN by first setting all sources to zero (voltage sources are replaced
with short circuits, and current sources with open circuits) and then finding the
resultant resistance between the two marked terminals.

Since RN = RTh, the procedure and value obtained using the approach described for
Thévenin’s theorem will determine the proper value of RN.
NORTON’S THEOREM
STEPS OF NORTON’S THEOREM.

DETERMINATION OF IN:
4. Calculate IN by first returning all sources to their original position
and then finding the short-circuit current between the marked
terminals. It is the same current that would be measured by an
ammeter placed between the marked terminals.

Conclusion:

5. Draw the Norton equivalent circuit with the portion of the circuit
previously removed replaced between the terminals of the
equivalent circuit.
NORTON’S THEOREM
STEPS OF NORTON’S THEOREM.

Norton and Thévenin equivalent circuits can also be found from each other by using
the source transformation
NORTON’S THEOREM
EXAMPLE 9.11 Find the Norton equivalent circuit for the network in the shaded area in
Fig. 9.61.
NORTON’S THEOREM
Solution:
Steps 1 and 2: See Fig. 9.62.

Step 3: See Fig. 9.63, and


NORTON’S THEOREM
Solution:
Step 4: See Fig. 9.64, which clearly indicates that the short-circuit connection
between terminals a and b is in parallel with R2 and eliminates its effect. IN is
therefore the same as through R1, and the full battery voltage appears across R1
since
NORTON’S THEOREM
Solution:
Step 5: See Fig. 9.65. This circuit is the same as the first one considered in the
development of Thévenin’s theorem.

simple conversion indicates that the Thévenin


circuits are, in fact, the same (Fig. 9.66).
NORTON’S THEOREM
EXAMPLE 9.12 Find the Norton equivalent circuit for the network external
to the 9 Ω resistor in Fig. 9.67.
QUIZ

1. Norton’s current is equal to the current passing


through the ___________ circuited ___________
terminals.

A. short, input
B. short, output
C. open, output
D. open, input

ANS: B. short, output


QUIZ

2. The expression of Norton’s current (IN) in the


circuit shown below is?

A. V/Z1
B. V/Z2
C. V(Z2/(Z1+Z2))
D. VZ1/(Z1+Z2)

ANS: A. V/Z1
QUIZ

3. In Norton’s theorem Isc is__________

A . Sum of two current sources


B. A single current source
C. Infinite current sources
D. 0

ANS: B. A single current source


QUIZ

4. In Norton’s equivalent circuit, Norton Resistance


and Current source are connected in __________

A . Series
B. Parallel
C. Star connection
D. Delta connection

ANS: B. Parallel
QUIZ

5. Norton resistance is found by?

A. Shorting all voltage sources


B. Opening all current sources
C. Shorting all voltage sources and opening
all current sources
D. Opening all voltage sources and shorting
all current sources

ANS: C.
HOME WORK
PRACTICE PROBLEM: (Two sources) Find the Norton
equivalent circuit for the portion of the network to
the left of a-b in Fig. 9.72.

Write down a program using C language to solve the above


circuit.

You might also like