8/6/2021 Aspen Plus® simulation software - a basic course for beginners - - Unit 4 - Week 2: Basic Process Modelling - Simulation

imulation Overview

(https://swayam.gov.in)      

(https://swayam.gov.in/nc_details/NPTEL)

abhijitnath726@gmail.com 

NPTEL (https://swayam.gov.in/explorer?ncCode=NPTEL)
»
Aspen Plus® simulation software - a basic

course for beginners (course)

Course
outline Week 02: Assignment 02
Assignment not submitted Due date: 2021-08-18, 23:59 IST.
How does an
NPTEL online 1) If there are two outlet streams in the “MIXER” block then the second one is a __________
course work? stream based on density.

decanted
Prerequisite :
Week 0 1 point

2) The specifications based on which the streams are split through “SSPLIT” are 1 point
Week 1: Basic
Process
Flow and limit flow
Modelling -
Split fraction and flow
Introduction,

Flow and cumulative flow
Initiation and
Properties
Split fraction and limit flow

Week 2: Basic

Process
Modelling -
Simulation
Overview

Lec 4: Using
Model Pallete -
Mixers/Splitters,
Separators
(unit?
unit=25&lesson=28)

Lec 5: Using
Model Pallete -
Exchangers

https://onlinecourses.nptel.ac.in/noc21_ch44/unit?unit=25&assessment=26 1/3
8/6/2021 Aspen Plus® simulation software - a basic course for beginners - - Unit 4 - Week 2: Basic Process Modelling - Simulation Overview

(unit?
unit=25&lesson=29)

Lec 6: Using
Model Pallete -
Columns
(unit?
unit=25&lesson=30)

Quiz: Week
02:
Assignment
02
(assessment?
name=26)

Week 2:
Feedback form
(unit?
unit=25&lesson=31)

Download

Figure 1.

3) The options that will appear in the dropdown menu as indicated by the red coloured 1 point
ring “A” in Figure 1 is/are

Mass-Frac

Vol-Frac

Mole-Frac

Vol-Flow

4) The options that will appear in the dropdown menu as indicated by the yellow 1 point
coloured ring “B” in Figure 1 is/are

kmol/oper-month

kmol/oper-day

kmol/oper-year

kmol/oper-week

5) The options that will appear in the dropdown menu as indicated by the green 1 point
coloured ring “C” in Figure 1 is/are

Mass

Volume

Stdvol

Weight

6) The option that will appear in the dropdown menu as indicated by the magenta coloured
broken ring “D” in Figure 1 is ___________ .

1 point

https://onlinecourses.nptel.ac.in/noc21_ch44/unit?unit=25&assessment=26 2/3
8/6/2021 Aspen Plus® simulation software - a basic course for beginners - - Unit 4 - Week 2: Basic Process Modelling - Simulation Overview

7) The type of separator model used for liquid-liquid separation is ___________ .

decanter
1 point

8) The outlets of model “FLASH3” are 1 point

1 vapour, 1 liquid

2 vapours, 1 liquid

1 vapour, 2 liquids

2 vapours, 2 liquids

9) The model “SEP” is a component separator. 1 point

True

False

10) The model block “HXFlux” is used to calculate 1 point

Overall heat transfer coecient

Heat flux

Rate of heat transfer

Nusselt number

11) The model block that uses Winn-Underwood-Gilliland method is 1 point

Extract

Distl

RadFrac

DSTWU

12) DSTWU and Distl blocks are useful for obtaining column parameters and provide 1 point
accurate results.

True

False

13) Type of distillation which is not performed using “RadFrac” model is 1 point

Azeotropic

Multicomponent

Extractive

Reactive

You may submit any number of times before the due date. The final submission will be
considered for grading.
Submit Answers

https://onlinecourses.nptel.ac.in/noc21_ch44/unit?unit=25&assessment=26 3/3