Programmable Logic Controller

Programmable logic controller
INTRODUCTION
• A programmable logic controller (PLC) is an industrial grade computer that is capable of being programmed to perform
control functions.
• The programmable controller has eliminated much of the hardwiring associated with conventional relay control circuits.
• Other benefits include easy programming and installation, high control speed, network compatibility, troubleshooting and
testing convenience, and high reliability.
• The programmable logic controller is designed for multiple input and output arrangements, extended
temperature ranges, immunity to electrical noise, and resistance to vibration and impact.
• Programs for the control and operation of manufacturing process equipment and machinery are typically
stored in battery-backed or nonvolatile memory.
• A PLC is an example of a real-time system since the output of the system controlled by the PLC depends on
the input conditions.
• The programmable logic controller is, then, basically a digital computer designed for use in
machine control.
• Unlike a personal computer, it has been designed to operate in the industrial environment and is
equipped with special input/output interfaces and a control programming language.
• It is capable not only of performing relay switching tasks but also of performing other applications
such as timing, counting, calculating, comparing, and the processing of analog signals.
• Relays have to be hardwired to perform a specific function. When the system requirements change,
the relay wiring has to be changed or modified. In extreme cases, such as in the auto industry,
complete control panels had to be replaced since it was not economically feasible to rewire the old
panels with each model changeover. The programmable controller has eliminated much of the
hardwiring associated with conventional relay control circuits.
Relay based control panel PLC-based control panel
Advantages of PLC
1. Increased Reliability- Once a program has been written and tested, it can be easily downloaded
to other PLCs. Since all the logic is contained in the PLC’s memory, there is no chance of
making a logic wiring error. The program takes the place of much of the external wiring that
would normally be required for control of a process.
All the logic is contained in the PLC’s memory

2. Lower Cost- PLCs were originally designed to replace relay control logic, and the cost savings have been so
significant that relay control is becoming obsolete except for power applications. Generally, if an application
has more than about a half-dozen control relays, it will probably be less expensive to install a PLC.
3. Communications Capability. A PLC can communicate with other controllers or computer equipment to
perform such functions as supervisory control, data gathering, monitoring devices and process parameters,
and download and upload of programs.
Plc communication module

4. More Flexibility. It is easier to create and change
a program in a PLC than to wire and rewire a
circuit. With a PLC the relationships between the
inputs and outputs are determined by the user
program instead of the manner in which they are
interconnected. Original equipment manufacturers
can provide system updates by simply sending out
a new program. End users can modify the
program in the field, or if desired, security can be
provided by hardware features such as key locks
and by software passwords.
Relationship between inputs and outputs are determined by the user

5. Faster Response Time- PLCs are designed for highspeed and real-time applications. The programmable
controller operates in real time, which means that an event taking place in the field will result in the
execution of an operation or output. Machines that process thousands of items per second and objects that
spend only a fraction of a second in front of a sensor require the PLC’s quick-response capability.
High speed counting

6. Easier to Troubleshoot-PLCs have resident diagnostics and override functions that allow
users to easily trace and correct software and hardware problems. To find and fix problems,
users can display the control program on a monitor and watch it in real time as it executes.
Control program can be displayed on a monitor in real time

Selection of PLC
• System requirements
The starting point in determining any solution must be to understand what is to be achieved.
The program design starts with breaking down the task into a number of simple
understandable elements, each of which can be easily
described.
• Application requirements
Input and output device requirements. After determining the operation of the system, the next step is to
determine what input and output devices the system requires.
List the function required and identify a specific type of device.
The need for special operations in addition to discrete (On/Off) logic.
List the advanced functions required beside simple discrete logic.

• Electrical Requirements
The electrical requirements for inputs, outputs, and system power; When determining the electrical
requirements of a system, consider three items:
– Incoming power (power for the control system);
– Input device voltage; and
– Output voltage and current.
• Speed of Operation
How fast the control system must operate (speed of operation).
When determining speed of operation, consider these points:
– How fast does the process occur or machine operate?

– Are there “time critical” operations or events that must be detected?
– In what time frame must the fastest action occur (input device detection to output device activation)?
– Does the control system need to count pulses from an encoder or flow-meter and respond quickly?
• Communication
If the application requires sharing data outside the process, i.e. communication. Communication
involves sharing application data or status with another electronic device, such as a computer or
a monitor in an operator’s station.
Communication can take place locally through a twisted-pair wire, or remotely via telephone or
radio modem.
• Operator Interface
If the system needs operator control or interaction. In order to convey information about machine
or process status, or to allow an operator to input data, many applications require operator
interfaces.
Traditional operator interfaces include pushbuttons, pilot lights and LED numeric display.
Electronic operator interface devices display messages about machine status in descriptive text,
display part count and track alarms. Also, they can be used for data input.
• Physical Environment
The physical environment in which the control system will be located. Consider the environment
where the control system will be located. In harsh environments, house the control system in an
appropriate IP-rated enclosure.
Remember to consider accessibility for maintenance, troubleshooting or reprogramming.

Applications of PLC
1.Industrial Applications of PLC
a) Transportation System likes Conveyor Belt System.
b) Packing and Labelling System in Food & Beverage.
c) Automatic Bottle or Liquid Filling System.
d) Packaging and Labelling System in Pharma Industries.
e) Transportation System like Escalator and Elevator.
2.Commercial Applications of PLC
a) Smart Traffic Control Signal System.
b) Smart Elevator Control System.
c) Fire Detection and Alarm System.
d) Automatic Machine Handling System.
e) Automatic Vehicle Washer System
4. Domestic Applications of PLC
a) Water Tank Level Control System
b) Car Washing and Parking System.
c) Flashing Light Controlling System.
d) Automatic Door Opening/Closing System.
e) Remote Monitoring Application like Air compressor (AC), Fan.
5.Automation Industries
a) Steel Industry
b) Glass Industry
c) Paper industry
d) Textile industry
e) Cement Industry
f) Chemical industry
g) Automobile industry
h) Food Processing System

Programmable Logic Controller

Uploaded by

Programmable Logic Controller

Uploaded by

Programmable logic controller

All the logic is contained in the PLC’s memory

Plc communication module

Relationship between inputs and outputs are determined by the user

High speed counting

Control program can be displayed on a monitor in real time

List the function required and identify a specific type of device.

The need for special operations in addition to discrete (On/Off) logic.

List the advanced functions required beside simple discrete logic.

– Incoming power (power for the control system);

– Input device voltage; and

– Output voltage and current.

How fast the control system must operate (speed of operation).

When determining speed of operation, consider these points:

– How fast does the process occur or machine operate?

Remember to consider accessibility for maintenance, troubleshooting or reprogramming.

You might also like