LEC3 Lab Selecting Switching Hardware Objecti

Lab – Selecting Switching Hardware
Objectives
Part 1: Explore Cisco Switch Products
Part 2: Select an Access Layer Switch
Part 3: Select a Distribution/Core Layer Switch
Background / Scenario
As a Network Engineer, you are part of a team that selects appropriate devices for your network. You need to
consider the network requirements for the company as they migrate to a converged network. This converged
network supports voice over IP (VoIP), video streaming, and expansion of the company to support a larger
customer base.
For a small- to medium-sized company, Cisco hierarchical network design suggests only using a two-tier LAN
design. This design consists of an access layer and a collapsed core/distribution layer. Network switches
come in different form factors, and with various features and functions. When selecting a switch, the team
must choose between fixed configuration or modular configuration, and stackable or non-stackable switches.
Based on a given set of requirements, you will identify the Cisco switch models and features to support the
requirements. The scope of this lab will limit the switch models to campus LAN only.
Required Resources
PC with Internet access
Part 1: Explore Cisco Switch Products

In Part 1, you will navigate the Cisco website and explore available switch products.
Step 1: Navigate the Cisco website.

At www.cisco.com, a list of available products and information about these products is available.
a. From the home page, click Products & Services > Switches.
Step 2: Explore switch products.

In the Feature Products section, a list of different categories of switches is displayed. In this lab, you will
explore the campus LAN switches. You can click different links to gather information about the different switch
models. On this page, the information is organized in different ways. You can view all available switches by
clicking View All Switches. If you click Compare Series, the switches are organized by types: modular vs.
fixed configuration.
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 5
a. Click the heading Campus LAN – Core and Distribution Switches.

List a few models and some of features in the table below.
Number of
Model Uplink Speed Ports/Speed Other Features
b. Click the heading Campus LAN – Access Switches.

Number of
Model Uplink Speed Ports/Speed Other Features
c. Click the heading Campus LAN – Compact Switches.

Model Uplink Speed Number of Ports/Speed Other Features
Part 2: Select an Access Layer Switch

The main function of an access layer switch is to provide network access to end user devices. This switch
connects to the core/distribution layer switches. Access switches are usually located in the intermediate
distribution frame (IDF). An IDF is mainly used for managing and interconnecting the telecommunications
cables between end user devices and a main distribution frame (MDF). There are typically multiple IDFs with
uplinks to a single centralized MDF.
An access switch should have the following capabilities: low cost per switch port, high port density, scalable
uplinks to higher layers, and user access functions and resiliency. In Part 2, you will select an access switch
based on the requirements set by the company. You have reviewed and become familiar with Cisco switch
product line.
a. Company A requires a replacement access switch in the wiring closet. The company requires the switch
to support VoIP and multicast, accommodate future growth of users and increased bandwidth usage. The
switch must support a minimum of 35 current users and have a high-speed uplink. List a few of models
that meet those requirements.
b. Company B would like to extend services to a conference room on an as-needed basis. The switch will be
placed on the conference room table, and switch security is a priority.
Part 3: Select a Distribution/Core Layer Switch

The distribution/core switch is the backbone of the network for the company. A reliable network core is of
paramount importance for the function of the company. A network backbone switch provides both adequate
capacity for current and future traffic requirements and resilience in the event of failure. They also require high
throughput, high availability, and advanced quality of service (QoS). These switches usually reside in the
main wiring closet (MDF) along with high speed servers, routers, and the termination point of your ISP.
a. Company C will replace a backbone switch in the next budget cycle. The switch must provide redundancy
features to minimize possible downtime in the event that an internal component fails. What features can
accommodate these requirements for the replacement switch?
b. Which Cisco Catalyst switches would you recommend?
c. As Company C grows, high speed, such as 10 GB Ethernet, up to 8 uplink ports, and a modular
configuration for the switch will become necessary. Which switch models would meet the requirement?
Reflection
What other factors should be considered during the selection process aside from network requirements and
costs?

LEC3 Lab Selecting Switching Hardware Objecti

Uploaded by

LEC3 Lab Selecting Switching Hardware Objecti

Uploaded by

Lab – Selecting Switching Hardware

Part 1: Explore Cisco Switch Products

Step 1: Navigate the Cisco website.

Step 2: Explore switch products.

a. Click the heading Campus LAN – Core and Distribution Switches.

b. Click the heading Campus LAN – Access Switches.

c. Click the heading Campus LAN – Compact Switches.

Model Uplink Speed Number of Ports/Speed Other Features

Part 2: Select an Access Layer Switch

Part 3: Select a Distribution/Core Layer Switch

b. Which Cisco Catalyst switches would you recommend?

You might also like