Hi-Gain ™ Outdoor W i re

rell e ss
ss-300
-300N
N
Dual Radio Smart Repeater

MODEL: HOW2R1

PACKAGE CONTENTS:
 One Hi-Gain™ Outdoor Wireless-N Dual Radio Smart Repeater
 Two 5dBi Hi-Gain Outdoor Omni-Directional Antennas
 One Power over Ethernet DC Injector
 L-shape Antennas Connector
 One Waterproof Gasket Kit for RJ-45
 Power Cable and Power Transformer
 Ethernet Cable
 Wall & Pole Mounting Kit
 Setup CD-Rom

Unleash your Wireless Network with the Hawking Hi-Gain™ Outdoor 2.4GHz Wireless-300N Dual
Radio Smart Repeater, HOW2R1. The HOW2R1 outdoor smart repeater connects and repeats your
existing wireless network with up to 64X the power output and 8X the distance of a standard Wireless-G
device. Similar to the Hawking’s HW2R1 Smart Repeater with dual radio design, the HOW2R1 Outdoor
Smart Repeater is engineered with two powerful Wi-Fi radios, one radio is dedicated to receiving signals
from a wireless source, access point or router, and the other radio is used to rebroadcasting wireless
signals throughout your surroundings. To further enhance its wireless range and coverage, the WiFi
receiving radio is connected to an 11dBi directional antenna, integrated internally in the HOW2R1. In
addition, two external 5dBi antennas are connected to the rebroadcasting WiFi radio to effectively
elimnates wireless deadspots inside and outside of your home or office.

This powerful repeater is not only robustly design to withstand outdoor environment, it also packed with wireless security features,
such as MAC access control, IEEE 802.11x authentication, WPA, WPA2, hidden ESSID, and the basic WEP encryption. With data
transfer rate of up to 300Mbps, the HOW2R1 is an ideal solution for High Performance Wireless Solution, extending your wireless
signals for your home or your business, or providing wireless access to RV parks or Marine docks. The possibilities are endless.
Features
 Connects and repeats any 2.4GHz 802.11b/g/n Wireless Network
• Eliminate Wireless Dead Spots inside and outside your Home or Office with high power output of up to 200mW
 Increase your wireless distance of up to 8X and power output of up to 64X compared to a standard wireless 802.11g network*
 Engineered with two WiFi radios - one receiving radio and one rebroadcasting radio
 Built-in 11dBi Directional Antenna is dedicated to receiving wireless signals
 Two 5dBi external Omni-Directional Antennas are dedicated to rebroadcasting wireless signals
• Easy Setup: Install and Configure in less than 1 Minute
• Heavy duty, waterproof design

System Requirements:
• One computer (Mac or PC) with an available CD or DVD-Rom drive
• Internet Web Browser (Internet Explorer, Safari, etc.)
• A Wired or Wireless networking adapter (i.e. Airport card, built-in Ethernet adapter, etc.)
• A Wireless Internet connection (such as a HotSpot, etc.)
Dual Radio Wireless Repeater

* Actual distance and data output power may vary depending on your networking environment.
 Hi-Gain ™ Outdoor Wireless-N
Dual Radio Smart Repeater
MODEL: HOW2R1

OUTDOOR WALL OR POLE

Internal 11dBi Directional Antenna - Receive
RECEIVE Wi-Fi Signal
WIRELESS SIGNALS MOUNTING KIT
INCLUDED

Two Built-in Wi-Fi Radios: Receiving and Rebroadcasting signals

Two External 5dBi Omni-Directional - Rebroadcast

REBROADCASTWi-Fi Signal
WIRELESS SIGNALS

SOLUTIONS SUPPORT UTILITY

HOME USE Extend a wireless signal to your backyard

Hi-Gain™ Wireless-N
Dual Radio Smart Repeater
HOW2R1 HotSpot

The included Windows based Smart Repeater Support Utility is

Connect the network and internet connection from one
a powerful tool for administrators to configure and
FOR THE OFFICE
office to another troubleshoot wireless connections for multiple Smart
Hi-Gain™ Wireless-N
Repeaters. The Support Utility allows administrators to upgrade
Dual Radio Smart Repeater firmware, reset devices to factory settings, adjust IP settings,
HOW2R1 Hi-Gain™ 14dBi Outdoor
Directional Antenna Kit scan and connect to wireless Internet networks and view
HAO14SDP
current system settings. The Utility uses a proprietary
communication protocol to connect to the Smart Repeater
without having to know the correct IP settings.

Connect to an on shore wireless Internet connection to

FOR MARINERS provide wireless Internet access to your boat or yacht HARDWARE SETUP

otSpot

Hi-Gain™ Wireless-N
Dual Radio Smart Repeater
HOW2R1

Power
Extend the range of a camp ground’s Data/Power
FOR OUTDOOR APPLICATIONS
wireless Internet
Power over Ethernet (PoE)
Injector (Included)
RV Host
HotSpot
By combining your power and data connections into a single cable, PoE simplifies
Hi-Gain™Hi-Gain
Wireless-N
™ Wireless-N

Dual
DualRadio
RadioSmart
SmartRepeater
Repeater
the setup of the Hi-Gain™ Outdoor Wireless-N Dual Radio Smart Repeater. The
RV Host
HOW2R1 HOW2R1 Repeater
included Power over Ethernet DC Injector provides power and network access
(through your home or business router or network connection), and combines
them into a single RJ-45 connection for the HOW2R1. This allows you to install the
HOW2R1 outdoor in hard to reach locations without worrying about running
both power and Ethernet cables.
 Hi-Gain ™ Outdoor Wireless-N
Dual Radio Smart Repeater
MODEL: HOW2R1

HAWKING TECHNOLOGIES, INC.

35 HAMMOND, SUITE 150 x I R V I N E, C A 9 2 6 1 8

SALES: (888) 662-8828 FAX: (949) 206-9072

E-MAIL: sales@hawkingtech.com TECHNICAL SUPPORT: techsupport@hawkingtech.com

POWER ON & CONNECT!

It’s easy to install, it’s easy to use! Everyone can do it.
STEP 1: Power on the Repeater
Connnect the included Ethernet cable Power

SPECIFICATIONS: to the Repeater, and Power over Data/Power

Ethernet Injector. Finally, connect the
Bridge Specifications (Receiving): power adapter to an available wall
Š 802.11n 150M Wireless WAN socket. Power over Ethernet (PoE)
Injector (Included)
x Dedicated RJ-SMA Antenna Port
x Real Time LED Signal Strength Display
x Supports WPA, WPA2, WEP Wi-Fi Security STEP 2: Configure the Repeater
Š Network Bridging Mode: Insert the included CD and open the
x Pass through Settings from a wireless Internet connection Support Utility. Configure the
Š Antenna: Internal 11dBi Directional Repeater, and you’re ready to go!
Š Ouput Power
x 11n: 18 ± 1.5dBm, 11g: 21 ± 1.5dBm, 11b: 23 ± 1.5dBm

Local Network Specifications (Rebroadcasting):

Š RJ-45 Ethernet 10/100M Port STEP 3: Mount the Repeater
Š 802.11n 300Mbps Wireless LAN Find a safe location to mount the
x Two dedicated RJ-SMA Antenna Ports
x Supports WPA, WPA2, WPS (Wi-Fi Protected Setup), WEP Wi-Fi
Hi-Gain Outdoor Wireless-N Smart
Security Repeater.
Š Broadband Router Features
x DHCP Server, Firewall, Demilitarized Zone (DMZ), Port
Forwarding, Quality of Service, Virtual Servers / Port Forwarding,
Network Address Translation, Access Control-Mac & IP Address NETWORK DIAGRAM
Filtering, URL Blocking, Denial of Service (DoS), Remote
Management
Š Antenna: Two external 5dBi Omni-Directional WIRELESS INTERNET CONNECTION
WIRELE

External Location
Š Ouput Power LOCAL WIRELESS NETWORK

x 11n: 14 ± 1.5dBm, 11g: 15 ± 1.5dBm, 11b: 17 ± 1.5dBm

Wireless Internet Connection
(wireless hot spot)
Hardware Specifications:
Š Connectors/Ports/Switches
x Two N-Type Connectors RECEIVES WIRELESS SIGNALS
x One 10/100M Ethernet Ports (LAN)
Š Power:
x 48V, 0.5 Switching Power Adapter (POE) Local Area

Š Dimension / Weight Hi-Gain™ Antenna provide

x POE Injector: 3 x 2¼ x ¾ in / app. 0.10 lb. more connection range.

x Repeater: 7 x 5½ x 3 in / app. 1.10 lb (excludes antennas)

Š Temperature
x Operating: -20~70˚C , Storage: -40~80˚C
Š Humidity
x Operating: 10~90% (Non-Condensing)
x Storage: 5~95% (Non-Condensing)
REBROADCASTS WIRELESS SIGNALS

Specifications are subject to change without prior notice. * Actual distance and data output power may vary depending on your networking environment.
©2010 Hawking Technologies, Inc. All righs reserved.