Scribd
Upload
74 views1 page

Computer Engineering, Inc.: WPQ D1.1 - C - 5.2.0 Form 2000 Rev. 0

This document is a welder qualification test record for welder Your A. Welder. It qualifies the welder to perform pipe-to-plate fillet welds using shielded metal arc welding in the flat position with E7018 filler metal and DCEP polarity. The test qualified welds from 3mm to unlimited fillet weld thickness in steel plates using any AWS approved filler metal. Visual and fracture testing of the test welds were acceptable.

Uploaded by

Erick Goyes
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
74 views1 page

Computer Engineering, Inc.: WPQ D1.1 - C - 5.2.0 Form 2000 Rev. 0

This document is a welder qualification test record for welder Your A. Welder. It qualifies the welder to perform pipe-to-plate fillet welds using shielded metal arc welding in the flat position with E7018 filler metal and DCEP polarity. The test qualified welds from 3mm to unlimited fillet weld thickness in steel plates using any AWS approved filler metal. Visual and fracture testing of the test welds were acceptable.

Uploaded by

Erick Goyes
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 1

Computer Engineering, Inc.

509 NW 5th Street


Blue Springs, MO 64014

Welder or Welding Operator Qualification Test Record (WPQR)

Welder's Name: Welder, Your A Stamp: Y-1


Test WPS No.: Pipe-to-plate Rev.: 0 WPQ No.: Metric Date: 2/20/2002 Page 1
Type of joint welded: Pipe-to-plate Fillet weld
Joint type(s) qualified: All applicable fillet welds
Base material(s) welded: ASTM A 36 to ASTM A 36

Variables (Table 4.10) Actual Values Used Range Qualified


Welding process / type SMAW / Manual SMAW / Manual
Base metal thickness - groove (mm) N/A N/A
Base metal thickness - fillet (mm) 12 mm 3 mm to unlimited
Pipe diameter - groove (mm) N/A N/A
Pipe diameter - fillet (mm) 0.0
Box tube size (mm) N/A All sizes
Dihedral angle - fillet 90 30º to unlimited
Backing Backing used With backing only
Filler metal classification E7018 Any AWS A5 approved
Filler metal specification 5.1
Filler metal F-No. 4 F1 - F4
Welding position - groove N/A N/A
Welding position - fillet 1FR - Rotated Flat only
Weld progression N/A N/A
Shielding gas N/A N/A
Welding current / polarity DCEP (reverse)
Transfer mode (GMAW) N/A N/A
Single / multiple electrode N/A N/A
Notes:
Visual inspection acceptable: Yes Other test results:
Fillet Test Results
Appearance: Acceptable Fillet size:
Fracture test root penetration: Acceptable Macroetch:
Organization: The Welding Lab Test No.:

Certified By: Quality Control


Date

We, the undersigned, certify that the statements in this record are correct and that the test welds were prepared, welded, and tested in accordance
with the requirements of Section 4 of AWS D1.1 2000 Structural Welding Code-Steel.
Manufacturer or Contractor: Computer Engineering, Inc.

President
Date

WPQ D1.1 - C - 5.2.0


Form 2000 Rev. 0

You might also like