20D180K Sunstar
20D180K Sunstar
DATA SHEET
METAL OXIDE VARISTOR – 20ĭ SERIES
FEATURE
Wide operating voltage (V1mA) range from 18V to 1800V.
Fast responding to transient over-voltage.
Large absorbing transient energy capability.
Low clamping ratio and no follow-on current.
Meets MSL level 1, per J-STD-020
APPLICATION
Transistor, diode, IC, thyristor or triac semiconductor protection.
Surge protection in consumer electronics.
Surge protection in industrial electronics.
Surge protection in electronic home appliances, gas and petroleum appliances.
Relay and electromagnetic valve surge absorption.
Tolerance
Type K: f10%
Element Diameter D: Disk L: f15%
S: Square Varistor Voltage M: f20%
Revision:15-Feb-12
ZOV 20ĭ SERIES
PACKAGE DIMENSIONS
D D D T
H
H1
H1
4.0 max
K İ 3.0 K İ 3.0
d1
d d L1
L1
D1 D1 D1
F TYPE
TABLE 1 TABLE 2
unit:mm unit:mm
Symbol Dimensions Model T(Max.) Model T(Max.)
H(max.) 26.5 180K 4.35 361K 5.38
H1(max.) 28.0 220K 4.44 391K 5.55
L(min.) 20.0 270K 4.59 431K 5.77
L1(min.) 15.0 330K 4.80 471K 5.99
D(max.) 23.0 390K 4.56 511K 6.21
D1 7.5±0.8/10.0±1.0 470K 4.77 561K 6.48
T(max.) TABLE 2 560K 5.02 621K 6.81
d(±0.05) 0.8/1.0 680K 5.32 681K 7.14
d1(±0.4) 1.4/1.6 820K 4.48 751K 7.53
101K 4.65 781K 7.69
121K 4.80 821K 7.91
151K 4.52 911K 8.17
181K 4.66 102K 8.64
201K 4.76 112K 9.16
221K 4.84 122K 9.69
241K 4.95 142K 11.26
271K 5.00 162K 11.78
301K 5.05 182K 12.83
331K 5.22
Revision:15-Feb-12
ZOV 20ĭ SERIES
ELECTRICAL CHARACTERISTIC
Maximum Maximum Withstanding Maximum Typical
Rated
Part Number Allowable Varistor Voltage Clamping Surge Energy Capacitance
Power
Voltage Voltage Current (10/1000ȝs) (Reference)
Standard High Surge VAC(V) VDC(V) V1mA(V) IP(A) VC(V) I(A) I(A) (J) (J) (W) @1KHZ(pf)
Standard High Surge Standard High Surge
Maximum Clamping
Voltage To meet the
specified value
The maximum average power that can be applied within the specified
Rated Wattage
ambient temperature.
The maximum energy within the varistor voltage change of ±10%
Energy
when one impulse of 10/1000ȝsec. or 2 msec. is applied.
Withstanding Surge The maximum current within the varistor voltage change of ±10% with
Current the standard impulse current (8/20ȝsec.) applied one time.
Varistor Voltage Vb at 20 ć - Vb at 70 ć 1
u u 100 (% ć ) 0.05% / ćmax
Temp. Coefficient Vb at 20 ć 50
The change of Vb shall be measured after the impulse listed below is
applied 10,000 times continuously with the interval of ten seconds at
room temperature.
180K to 680K 10A (8/20ȝsec.)
5ĭ series
820K to 751K 20A (8/20ȝsec.)
Revision:15-Feb-12
ZOV 20ĭ SERIES
MARKING CODE
ZOV
ķ
XXXKDXXX
ļ
ĸ
Ľ
Ĺ XXX H
ĺ ľ
Ļ Ŀ
VDE
x X
ŀ
ķ ZOV Logo
ĸ Varistor Voltage
Ĺ UL Accreditation Logo
ĺ CSA Accreditation Logo
Ļ VDE Accreditation Logo
ļ “J” is High Surge Code,not “J” is Standard Surge
Ľ Disk Size
ľ “H” is Halogen Free Code,not “H” is Halogen
Ŀ Date Code
ŀ Product Line Code
Revision:15-Feb-12