Sr.No.

: Test Form : Generator Protection Relay

Company : Date :
System :

1.0 Relay Specification :

Make/ Type Model No. Sr. No. Control Supply Relay Rating

2.0 Measurements :
Phase CT Ratio : Neutral CT Ratio : VT Ratio :
Phase Side Neutral Side
Measured Injected Current
Injected Voltage Primary Primary
Voltage (Phase & Neutral side)
(V) Current Current
(KV) (A)
(KA) (KA)

3.0 Differential Protection :

3.1 Pickup Test Phase side:
Set Current Calculated Current Injected Current Operating Time
Phase
(A) (A) (A) (sec)

3.2 Pickup Test Neutral side

Set Current Calculated Current Injected Current Operating Time

Phase
(A) (A) (A) (sec)

3.3 Stability Check :

Page: 1 of 6
 Injected Current Injected Current
Side Reference Phase Relay Status
Side-1 Side-2

3.4 Sensitivity Check :

Injected Current Injected Current
Side Reference Phase Relay Status
Side-1 Side-2

3.5 Slope check Stable Condition : ( Slope 1 = 25% )

Injected Current Injected Current Differential Restraint

Phase Relay Status
Side-1 Side-2 Current Current

Id =
Ires. =
Id / Ires =

3.6 Slope check Unstable Condition : ( Slope 1 = 25% )

Injected Current Injected Current Differential Restraint
Phase Relay Status
Side-1 Side-2 Current Current

Id =
Ires. =
Id / Ires =

3.7 Slope check Unstable Condition : ( Slope 2 = 50% )

Page: 2 of 6
 Injected Current Injected Current Differential Restraint
Phase Relay Status
Side-1 Side-2 Current Current
R

3.8 Slope check Unstable Condition : ( Slope 2 = 50% )

Injected Current Injected Current Differential Restraint
Phase Relay Status
Side-1 Side-2 Current Current
R

Id =
Ires. =
Id / Ires. =

4.0 Instantaneous Differential Protection (87G) :

Set Current Calculated Current Injected Current Operating Time
Phase
(A) (A) (A) (sec)

5.0 Over Current With Under Voltage (I>) :

Set Current Injected Current Set time Operating Time
Phase
(A) (A) (sec) (sec)

6.0 Over Current (I>>) :

Set Current Injected Current Set time Operating Time
Phase
(A) (A) (sec) (sec)

7.0 Voltage Restrained Over Current (Ip) :

Page: 3 of 6
 Iset = , TMS = , Curve =
Injected Current Calculating time Operating Time
Phase (A) (sec) (sec)
2x 5x 10x 2x 5x 10x 2x 5x 10x

8.0 SEF-B :
Set Current Injected Current Applied Set time Operating
Phase
Iee-b (A) (A) Voltage (V) (sec) Time (sec)

9.0 Stator Earth Fault (3rd) Harmonics :

Set Uo Injected
Applied Uo Applied Set time Operating
Phase Voltage Current
Voltage (V) Voltage (V) (sec) Time (sec)
(V) (A)

10.0 Unbalance load (I2>)

Set time Operating Time
Phase Set Value I2 Injected I2 Current (A)
(sec) (sec)

11.0 Under Excitation

11.1 Char-1 W/O UV : B = ; Angle =
Set time Operating Time
Phase Injected Current (A) Applied Voltage (V)
(sec) (sec)

12.0 Under Voltage (U<) :

Page: 4 of 6
 Set Voltage Injected Voltage Set time Operating Time
Phase
(V) (V) (sec) (sec)

13.0 Under Voltage (U<<) :

Set Voltage Injected Voltage Set time Operating Time
Phase
(V) (V) (sec) (sec)

14.0 Over Voltage (U>) :

Set Voltage Injected Voltage Set time Operating Time
Phase
(V) (V) (sec) (sec)

15.0 Over Voltage (U>>) :

Set Voltage Injected Voltage Set time Operating Time
Phase
(V) (V) (sec) (sec)

16.0 Under Frequency (F<) :

Set Frequency Injected Set time Operating Time
Phase
(Hz) Frequency (Hz) (sec) (sec)

17.0 Under Frequency (F<<) :

Set Frequency Injected Set time Operating Time
Phase
(Hz) Frequency (Hz) (sec) (sec)

18.0 Over Frequency (F>) :

Page: 5 of 6
 Set Frequency Injected Set time Operating Time
Phase
(Hz) Frequency (Hz) (sec) (sec)

19.0 Over Frequency (F>>) :

Set Frequency Injected Set time Operating Time
Phase
(Hz) Frequency (Hz) (sec) (sec)

20.0 Over Excitation ( V/Hz ) :

Applied Applied Operated Operating
Set Value Set time
Condition Voltage Frequency Value Time
(V/Hz) (sec)
(V) (Hz) (V/Hz) (sec)

21.0 Low Forward Power :

Setting Applied Voltage Injected Current Set time Operating
Phase
Value (V) (A) (sec) Time (sec)

22.0 Reverse Active Power :

Injected Current Applied Set time Operating
Phase Setting Value
(A) Voltage (V) (sec) Time (sec)

23.0 Dead Machine Protection ( Inadvertent Energization ) :

Operating Time
Phase Set Value Inject value
(sec)

24.0 Remark : Relay test results are found satisfactory.

Page: 6 of 6