Scribd
Upload
52 views2 pages

Rhino Eng

RHINO is a 2-cylinder hydraulic piston pump with an S-valve and variable output for shotcrete, micro-concrete, and other construction applications. It can pump concrete between 2-15 cubic meters per hour up to 100 meters in height or 200 meters in distance. Key features include a 250 liter hopper, 80 bar maximum working pressure, and diesel or electric power options.

Uploaded by

Diego Bernal
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
52 views2 pages

Rhino Eng

RHINO is a 2-cylinder hydraulic piston pump with an S-valve and variable output for shotcrete, micro-concrete, and other construction applications. It can pump concrete between 2-15 cubic meters per hour up to 100 meters in height or 200 meters in distance. Key features include a 250 liter hopper, 80 bar maximum working pressure, and diesel or electric power options.

Uploaded by

Diego Bernal
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 2

RHINO

1600

4200*

Characteristics Applications
RHINO is a 2-cylinder hydraulic piston pump with S-valve and Shotcrete works
variable output for shotcrete, micro-concrete, special
concrete. RHINO is a reliable choice in tight jobsites. Concrete, grouts, structural mortars,
refractory mortars
Self-levelling floor screeds

Land reinforcement
Micro-piles, pressurized injection of mortars
and cementitious slurries
Compaction grouting

Dimensions

Manual draw bar


RHINO
Technical data Scope of delivery

Liquid cooled diesel engine


Yanmar 4TNV88 - 4 cyl. 36,4 4-cylinder liquid cooled diesel engine
kW - 49,5 HP (Stage IIIA)

Electric motor (upon request)


Hopper assembly with S-valve and agitator
22 kW - 400 V 50 Hz

Infinitely adjustable output* m³/h from 2 to 15


Centralized lubrication system

Max. aggregate size mm 25 Hydraulic circuit with optimized exchange sequence


Max. working pressure bar 80 Electromechanical control board
Pumping cylinders mm Ø 120 strike of 700 mm
Variable displacement pump
Max. strokes 30
30 m cable remote control
Drive cylinder diameter mm 80/50

Delivery manifold
Accessory box
mm Ø 100

Hopper capacity l 250


Grill with 15 mm mesh with electric vibrator

Delivery distance* m 200 Additive-dosing peristaltic pump


Delivery height* m 100

Filling height cm 135

Manual drawbar - fixed axle


Chassis and pneumatic wheels
Dimensions (L x W x H) cm 336 x 150 x 160

Weight (draw-bar) kg 1.600

* The data indicated are theoretical and depend on the quality and
consistency of the materials to be used, wear and tear of the pump and
the diameter of the hoses. The performance in distance and height can
not be reached simultaneously.

Technical advantages Options


Thanks to its unique mechanical engineering, to the dimensions of Shotcrete gun kit Ø 40mm with 2” concrete hose, length 8m with
the pump-valve assembly and to the configuration of the hydraulic 1” air and additive lines, length 10m
system, the machine can be used for transporting and casting
concrete, for spraying mortars and for shotcrete.

With 80 bar of maximum pressure, the machine can pump


concrete between 2 and 15 cubic meters per hour up to
considerable heights and distances.

It can be equipped with steel pipes or rubber hoses of different


diameters depending on the amount and the particle size of the
aggregates to be pumped.

cifa.com
CIFA S.p.A. / Via Stati Uniti d’America, 26 / 20030 SENAGO  (MI) / ITALY
Tel. +39 02 990 131 / sales@cifa.com

RHINO_ENG_0222

You might also like