Arduino-Based Soldier Location and Health Tracking System
Arduino-Based Soldier Location and Health Tracking System
Volume 7, Issue 11, November – 2022 International Journal of Innovative Science and Research Technology
ISSN No:-2456-2165
Arduino-based Soldier Location and Health Tracking
System
Om Khandelot Vedant Rotkar
Instrumentation & Control Dept Electronics & Telecommunication Dept
Vishwakarma Institute of Technology Vishwakarma Institute of Technology
Pune, India Pune, India
Mayur Chauhan Pratik Ingawale
Instrumentation & Control Dept Instrumentation & Control Dept
Vishwakarma Institute of Technology Vishwakarma Institute of Technology
Pune, India Pune, India
Abstract:- This paper reports a Soldier Strap or a Soldier pulse rate sensor, LM35 sensor, and Grove(gas sensor)
Health and Location Monitoring device with millions of respectively. Their system will also have a trigger in case any
soldiers, the Indian Army ranks third in size worldwide. of these measurements fall below a certain threshold value.
The army suffered a lot and went through major hardships This trigger will communicate to the headquarters that these h
and losses due to the unavailability of a real-time soldier Monitoring and Tracking System Using Critical values have
tracking system. The system proposed in this paper will try fallen below the level. Their proposed system also has a panic
to solve the above-mentioned problem. This system aims to button on the soldier’s side for immediate emergency
measure the vital signs of the soldier, and the location and communication[1].
transmit this info to the army headquarters. For this
purpose, heartbeat sensor, temperature sensor(LM35), This paper is written by Akshita V. Armarkar, Deepika J
GPS Model and Arduino(ATmega 328p) as the processor Punekar, Mrunali V . Kapse, Sweta Kumari, and Jayshree A.
Shelke published in 2017. The Topic of the research was a
Keywords:- Heartbeat sensor, Temperature sensor(LM35), “Soldier Health and Position Tracking System”. Soldiers get
GPS Model, Arduino(ATmega 328p) injured and even lose their lives during military conflicts and
search and rescue missions. Army base stations require GPS
I. INTRODUCTION devices to locate soldiers, WBASNs to detect health-related
parameters in soldiers, and a wireless transmitter to transfer
The Indian Army is one of the world's largest militaries. the data wirelessly in order to locate soldiers and offer health
It is consistently ranked among the world's top five militaries. monitoring. [2]. Researchers Hong Beng Lim, Di Ma, Bang
In terms of national security and protection, the military plays Wang, Zbigniew Kalbarczyk, Ravishankar k. Lyer, and
a significant role. In the midst of the battlefield's uncertainty, Kenneth L. Watkin have discussed recent developments in
we must ensure that each and every soldier is safe and technology as well as a variety of wearable, portable,
protected. Due to the lack of such a mechanism, this frequently lightweight, and compact sensors that have been developed for
does not occur. Many of the casualties have been determined monitoring human physiological parameters. The
to be due to a lack of prompt medical assistance rather than a electrodermal activity (EDA) sensor, blood pressure sensors,
direct enemy attack. As a result, finding a mechanism to track electrocardiogram (ECG) sensors, and other physiological and
these soldiers becomes critical. The soldier's vital life signs biomedical sensors are all part of the body sensor network
and location are the bare minimums that must be monitored to (BSN), which can be used to monitor a person's health in real-
ensure that the soldier is safe. time [3]. A proposal for the security of soldiers was made by
Shruti Nikam, Supriya Patil, Prajkta Power, and V.S. Bendre.
II. LITERATURE REVIEW The condition of a soldier's health and the ammunition carried
by them can both be seen using a variety of tools. The
This paper is researched upon and written by Niket Patil Biosensor has the excellent processing power and enables low-
and Brijesh Iyer, published in 2017. The topic of their research cost wearable health monitoring solutions. It is made up of
was a “Health Internet of Things. The main aim of this paper several kinds of tiny physiological sensors and transmission
was to create a Health Monitoring and Location Tracking modules.[4]. P.S. Kurhe and S.S. Agrawal have devised a
System for soldiers to maintain constant real-time system that allows for the capacity to track the soldiers at any
communication between the headquarters and the on-field time, according to Dinesh Kumar Jaiswar and Sanjana S.
soldiers. For this purpose, they have used IoT or Internet of Repal in their survey. The soldiers will also be able to contact
Things. Along with IoT technology, they have also used the control room using GPS coordinates when they are in
multiple sensors for this purpose. Their proposed system aims trouble. Since World War II, when military forces understood
to track the heartbeat, temperature, oxygen analysis, and its use for fleet management, navigation, placement, and
location of the soldier. The data processor they used is Arduino targeting, location monitoring has gained significant attention.
(ATmega 328p). The communication technique is GPS and For remote soldier health monitoring and position tracking,
IoT. The location will be tracked using the GPS module. this device is dependable and energy-efficient. Real-time
Heartbeat, temperature, and oxygen will be tracked using a transmission of a soldier's sensed and processed parameters is
IJISRT22NOV910 www.ijisrt.com 1573
Volume 7, Issue 11, November – 2022 International Journal of Innovative Science and Research Technology
ISSN No:-2456-2165
possible. It enables the army control room to track soldiers'
vital signs, such as heart rate and body temperature, using body
sensors. [5].
This paper is researched and written by, Chaithra R L1
and Mamatha V2 published in 2019. The topic of their
research was a "Internet of Things-Based Health Monitoring
and Tracking System. Basically, this mechanism exists to
ensure the soldier's protection. Soldiers are a vital part of the
country, and their lives are precious. Lots of soldiers are facing
many problems such as communication with the control room
and no proper medical help at a proper time which leads to the
death of the soldier. To minimize such cases, we have
proposed a continuous alert system to track location and
monitor the health of the soldier. The proposed system is very
useful in detecting the location of the soldier in real time using
GPS and communicating the health status parameter
continuously using the GSM module embedded in the
microcontroller. The tiny sensors can be attached to a soldier's
body or uniform to monitor body parameters and send
information to the control center and other soldiers when the
body rate drops below a preset threshold. The soldier can send
an alert message to the guardian and control room for help in
the panic situation using an application. The control
room/guardian also uses an android application to request the
location of the soldier automatically in a panic situation. The
soldier can also request the nearest hospital information in an
emergency[6].
Deepa J, Ranjini, and Sharanya Raj conducted the
research for this paper and wrote it. "Soldier Health and
Position Tracking System Using GPS and GSM Module" was
the focus of their study. The army staff is able to prepare battle
strategies thanks to the tracking of soldier navigation from
Fig.1 Flow chart
soldier to soldier, including understanding their speed,
distance, height, and health state during the fight. GPS is used
IV. EXPERIMENTAL SETUP
by the base station to determine the soldier's location. With the
aid of GSM, the base station may access the soldier's present
condition as it is shown on the phone, allowing for the DESIGN
Hardware Requirements:
identification of the necessary actions[7].
1. Arduino:
III. METHODOLOGY
Arduino is the brain of our project. It is the main
microcontroller that is used for calculation, processing and
The Overall Design of our system consists of the
communication of values in our project. It uses the
following phases:
Atmega328p microcontroller for processing.
1. Setup the component: ARDUINO, GPS, PULSE SENSOR,
TEMPERATURE SENSOR, COMMUNICATION
MODULE.
2. Coding of the following components.
3. Getting Health Status by using Pulse sensor and
Temperature Sensor.
4. Communication between Soldier and Medical Authority
Communication Module.
5. Getting Exact Location of Soldier using GPS module, to get
urgent help to the soldier.
Fig. 2 Arduino UNO R3
IJISRT22NOV910 www.ijisrt.com 1574
Volume 7, Issue 11, November – 2022 International Journal of Innovative Science and Research Technology
ISSN No:-2456-2165
2. Heartbeat Sensor/Pulse Sensor 4. GPS Positioning Tracker
One of the primary health monitoring sensors in our
project. The pulse sensor has 3 main pins. The VCC, Ground
and the Output pin. The simulation version has 4 pins, the 3
previously mentioned and the fourth being the test pin. Since,
we cannot actually check whether the pulse is present or not,
we use the test pin.
Fig. 5 GPS Positioning Tracker
Another important sensor that we have used is the GPS
Position Tracking Module for Arduino. It has four pins. The
VCC, Ground and two data communication Tx and Rx pins.
Fig. 3 Heartbeat Sensor/Pulse Sensor
3. LM35 Temperature Sensor
Fig. 6 Block Diagram
Fig. 4 LM35 Temperature Sensor
Fig. 7 Circuit Diagram
LM35 is a standard 3 pin precision centigrade
temperature sensor. As the name suggests, it is used to measure V. OUTPUT
the temperature of our soldier on the battlefield. It has standard
3 pins. VCC, Ground and Output.
Fig. 8 Result
IJISRT22NOV910 www.ijisrt.com 1575
Volume 7, Issue 11, November – 2022 International Journal of Innovative Science and Research Technology
ISSN No:-2456-2165
REFERENCES
[1]. Niket Patil, Student Member, IEEE and Brijesh Iyer,
Member, IEEE- “Health Monitoring and Tracking
System For Soldiers Using Internet of Things(IoT)”-
International Conference on Computing,
Communication and Automation (ICCCA2017)
[2]. Akshita V. Armarkar, Deepika J. Punekar, Mrunali V.
Kapse, Sweta Kumari, Jayshree V. Shelke-”Soldier
Health and Position Tracking System”-2017 IJESC
[3]. Chaithra R L, Mamatha V-”Soldier Health Status
Detection and Location Tracking System using Internet
of Things”-International Journal of Advanced Computer
Science and Technology. ISSN 2249-3123 Volume 9,
Fig. 9 Virtual terminal Number 1 (2019), pp. 1-8
[4]. Deepa J , Ranjini , Sharanya Raj-”Soldier Health and
Position Tracking System using GPS and GSM
Modem.”-International Journal of Engineering Research
& Technology (IJERT)2018
Fig. 10 Heartbeat graph
VI. FUTURE SCOPE
A blood pressure sensor and an electro dermal activity
sensor can be used combined to determine if a soldier is in
danger. Is he calm or distressed?
We can make an emergency call if a soldier's health
parameters exceed a specified threshold value or if the soldier's
coordinates deviate from a predetermined path.
VII. CONCLUSION
Soldiers’ Security and safety: GPS tracks a soldier's
whereabouts anywhere on the globe, while a health system
analyses crucial health metrics and environmental conditions,
ensuring soldiers' security and safety. When finished, the
aforementioned technology will assist in determining a
soldier's health status utilizing readings of heart rate and body
temperature. Additionally, it would help track his whereabouts
using a GPS modem, and it could send all of the information
to the base station via a GSM modem so that more may be
done with it. As a result, a tracking and navigation system is a
very useful idea for soldiers on the front lines of battle.
Additionally, so that the base station may view the soldier in
real-time.
