MOSHELL COMMANDS

NOTE: Exclusive for PENTA PROJECT TEAM/Author/RMALVAREZ

1. To read MCPA temp

Ø Cabx (to check RBS status)
Ø lhsh 010200/port_0_dev_13 mcpaBoard temp
Ø lhsh 010200/port_0_dev_13 help
Ø lhsh 010200/port_0_dev_13 restart (if need to restart)
TELNET commands should MOSHELL hang due to GPB
telnet IP add
cv cu
cv ls
cv mk
cv set
restartObj me

2. To check E1-MS port in RXI/RBS (add E1 for RBS)

In RNC
Ø st <sitename>
Ø get <proxy> iub -à look for RBS ID
In RXI
Ø pr .<rbs ID> eg. pr .0095
Ø lk <proxy>
Ø st atmport=ms-x-y
Ø bl
Ø lget ms-2-2 (then check iub number with STR printout – see tally or not)
Ø reservedBy Aal2PathVccTp=b0001a2 <----- iub # =
0001
Ø to deblock E1 port in RXI
Ø lst slot=12.*31
Ø lst Slot=16.*Vc12Ttp=14
Ø ldeb Slot=16.*Vc12Ttp=14 - (Example MS-16-14)
In RBS (when port is ready but E1 not pull through yet – so that no alarm)
Ø pr atmport
Ø get <proxy> ie. get 1345
Ø lget Subrack=1,Slot=2,PlugInUnit=1,Etm1=1,E1PhysPathTerm=pp2
Ø set <proxy> administrativeState 0 (to lock the 2nd physical port)
Ø set 194 administrativeState 0 (to lock the 2nd physical port)

3. To check pm (performance) counters in RNC/RXI

Ø get 1 (to see the performance directory)
Ø ls -l /p001200/pm/ | grep xml (to see the performance files)
Ø pst (list the scanners, status)
Ø pmr [-m 5 –p 3] (get performance report) [for the last 5 hours
+ 3 ]

4. To create performance counters scanner

Ø pst
Ø pgetsn <proxy>
Ø pcr <name> <mo-name> <counter-name> eg. pcr <rssi> cellcarrier
pmAverageRssi
Ø pget <mo-name> <counter-name> to read the counters

PDF created with pdfFactory trial version www.pdffactory.com

 Ø pbl/pdeb <proxy> to stop/resume scanner
Ø pdel <proxy> to delete scanner

5. To set Electrical Tilt (RET)

Ø pr retdevice
Ø get <proxy>
Ø set <proxy> electricalAntennaTilt <value>
Ø get ret electrical

6. To set Latitude/Longitude
Ø get sector lat
Ø set sector latitude <value>

7. To log alarm in a nice format

Ø lgevsm

8. Sample Scripts in moshell

Ø for 10
Enter commmands (one per line), then type "done"
> get radiolink num
> wait 2
> done

9. To enable E1 supervision
Ø set

10. To create Group (eg. Not reserved VclTp)

Ø get vcltp reservedby !.*=
Ø lma <group-name> vcltp reservedby !.*=

11. To create performance counters

Ø pst

12. To check cell state

In RBS
Ø lst cell
Ø get radiolinks (to see how many line/s being used)

13. To check RBS MO

In RBS
Ø st plug (AuxPlugInUnit=2 is the RET, AuxPlugInUnit=1 is the ASC)
Ø cabx
Ø cab (without the external parts)

14. To change SAC (Service Area Code)

In RBS determine max capability to transmit

Ø SUNWMU> get all xdl
Ø get all xdl ---> in EMAS, click RBSLocalCell, Properties,
Characteristics, Max & Min value
Ø example result printout = maxDlPowerCapability 422

PDF created with pdfFactory trial version www.pdffactory.com

 15. To lock/unlock cells
In RNC
Ø st utrancell=sunwmu
Ø lst sunw
Ø lbl sunw (to lock cell & channels)
Ø bl sunw (to lock cell only)
Ø deb sunw (to unlock)

16. To check RBS info

In RBS
Ø Get 0
Ø Get 1 (check ntpServerAddressPrimary)

17. To check network clock synchronisation

In RNC & RBS
Ø Read clock (GMT +8)
Ø ntpconfig info
Ø Check which OMNIFSERVER the node is connected to (i.e
ntpServerAddressPrimary) – from get 1

18. To check atmport & pp (physical port)

In RBS
Ø lpr atmport
Ø vc32&33 for signaling
Ø lpget 1007 (vc proxy) – to see number of ATM traffic cells transferred
Ø get atmport=1-2-2
Ø then : lget Subrack=1,Slot=2,PlugInUnit=1,Etm1=1,E1PhysPathTerm=pp2
Ø to un/lock have to set values 1 or 0

19. To administer state of Mos

In RBS
Ø St plug
Ø Deb proxy
Ø Bl proxy
Ø No need to use set 1 or set 0 (only for physical ports) otherwise use deb &
bl

20. To autocreateCV
In RNC & RBS
Ø Get config
Ø Cv ls (2 CVs will be used for the autocreate CV function)
Ø Set “proxy” autoCreatedCVIsTurnedOn true/false
Ø Set timeForAutoCreatedCV (UTC time)
Ø Set timeForAutoCreatedCV 13:00 (cv autocreated at 9pm)

21. To restart Node

In RNC,RXI & RBS
Ø acc 0 restart
Ø poll (to wait 20seconds until node comes up again)

22. To create CV
In RNC,RXI & RBS
Ø cvms CXP9010373%1_R11G_050725_1516 emfauzi change_ntpserver_ip
Ø cvms CXP9010373%1_R11G_050725_1516 followed by comments for the CV
Ø cvset CXP9010373%1_R11G -- to set the CV startable

PDF created with pdfFactory trial version www.pdffactory.com

 23. To restart node
In RNC & node B
Ø acc 0 restart
Ø pol - to get moshell connected once node has restarted

24. To check plugin status

In RNC & node B
Ø st plugin
Ø st plugin 1 0
Ø st plugin 0 1
Ø lst plug 0

25. To enter Moshell with security enabled

In RNC & node B
Ø moshell -c host.p12 10.78.37.225

26. To block sectors via Moshell

In RNC
Ø St blip
Ø Bl the proxy
Ø Deb the proxy (can have multiple proxies for more cells)

27. To view delay & attenuation parameters within a sector

In RBS
Ø Get jumper
Ø Get feeder
Ø Get rbs xdl

28. To delete something already done with a script

In RNC/RXI/RBS
Ø First you have to generate the MO Delete script
Ø This is done by ./undomo add2nde1inrxi_PUJMMU.mo > pujmrxibesi01.mo
Ø [~]$ ./undomo add2nde1inrxi_PUJMMU.mo > pujmrxibesi01.mo
Ø [~]$
Ø Where add2nde1inrxi_PUJMMU.mo is the script which was run earlier
Ø And pujmrxibesi01.mo is the Delete Script
Ø Modify add2nde1inrxi_PUJMMU.mo so that downtime will be less
Ø Run pujmrxibesi01.mo to undo the wrongly defined MO
Ø Then run the modified/correct add2nde1inrxi_PUJMMU.mo

29. To check E1 state

In RBS
Ø St atmport
Ø Check port lock state
Ø St pp St pp2 st pp3 st pp4

30. To check locked board in node

In all nodes
Ø lst plug 0

31. To restart / reload board

In all nodes
Ø Acc 000900 restart

PDF created with pdfFactory trial version www.pdffactory.com

 Ø Acc 001400 reload

32. run and trun

In all nodes
Ø trun is only for xml scripts
Ø run for scripts such as set DAGAMU_1 usedFreqThresh2dEcno -12
Ø trun for running the last script : rbs_EQINMU_site_complete.mo
Ø run is for any script (txt for example)
Ø open logfile l+ 20060113_CR003_RNCTGEM01.log
Ø cannot have undo mode while having gsg activated
Ø run CR003_13012006.txt
Ø close logfile

33. CAB printout 0 = slot 28, 1 = slot 1

In all nodes
RXIKPNG02> cab
060206-11:09:22
.......
==================================================================================
===================
SMN APN BOARD GREEN YELLOW RED PRODUCT NR REV DATE
SERIAL NR TEMP COREMGR
==================================================================================
===================
0 1 SCB2 ON OFF OFF ROJ 119 2108/3 R3D 20050608
TU86364489
0 2 HUB MP ON OFF OFF ROJ 119 2106/40 R5A 20050626
TU86494707 +32C Active
0 3 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050626
TU86494699 +31C StandbyReady
0 4 TUB ON OFF OFF ROJ 119 2104/4 R3B 20050620
TU86442436
0 5 TUB ON OFF OFF ROJ 119 2104/4 R3B 20050620
TU86442439
0 8 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718
TU86644146
0 10 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718
TU86644042
0 12 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718
TU86644052
0 14 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718
TU86644056
0 16 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718
TU86644037
0 18 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718
TU86644067
0 20 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050708
TU86592867
0 24 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702
TU86545997
0 25 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702
TU86545998
0 26 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702
TU86545996
0 27 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702
TU86546001
0 0 SCB2 ON OFF OFF ROJ 119 2108/3 R3D 20050608
TU86364157
----------------------------------------------------------------------------------
-------------------

1 is slot 1
0 is slot 28

PDF created with pdfFactory trial version www.pdffactory.com

 34. When lock/unlock from log
In RBS
Ø Lgv
Ø Lgaevsm – rather long

35. Read VSWR / OUTPUT Power from RBS

In RBS
Ø lhsh 010900 ps port*
Ø lhsh 010600 lhsh port_0_dev_17 asc vswr - sector 1
Ø lhsh 010900 lhsh port_0_dev_19 asc vswr
Ø lhsh 010900 lhsh port_0_dev_19 asc vswr - sector 2
Ø lhsh 010600 lhsh port_0_dev_17 asc pow
Ø acc 011200 restart - restart AIU

Ø port_0_dev_5 FU12
Ø port_1_dev_11 ASC
Ø Sec.2-port_4_dev_6 RU21
Ø port_4_dev_6 FU12
Ø port_5_dev_13 ASC
Ø Sec.3-port_8_dev_7 RU21
Ø port_8_dev_7 FU12
Ø port_9_dev_15 ASC

Ø SMN APN PORT BOARD GREEN YELLOW RED PRODUCT NR

REV DATE SERIAL NR
Ø ============================================================================
=====================================
Ø 0 12 port_0_dev_4 RU22 steady 16hz off KRC 118 22/1
R1G 20070829 AE55520905
Ø 0 12 port_4_dev_5 RU22 steady 16hz off KRC 118 22/1
R1G 20070829 AE55520893
Ø 0 12 port_8_dev_6 RU22 steady 16hz off KRC 118 22/1
R1G 20070829 AE55520921
Ø ----------------------------------------------------------------------------
-------------------------------------

Ø
Ø 080408-13:32:58 10.109.246.153 7.0h RBS_NODE_MODEL_J_5_16 stopfile=/tmp/1052
Ø $ lhsh 001200/port_0_dev_4 fui get devstat
Ø Board: fuHw: Hw08P1, faultStatus: 0x0, temp: 47.0, sv: on, svTmaDegrad:
off, comp: on
Ø
Ø Dev1: mode: {ModeAuxTma}, feedPow: highPow
Ø capability: {vswrAntSv | tma19Sv | ulGainConf | maxUlGain}
Ø svCtrl: 0xe400, faultStatus: 0x0000
Ø txFreq: 882800, sensitivity: 49, gainUl: 4.0, volt: 16571.5,
curr: 84.0, dCycle: 0.0
Ø Dev2: mode: {ModeAuxTma}, feedPow: highPow
Ø capability: {resAntSv | tma19Sv | ulGainConf | maxUlGain}
Ø svCtrl: 0x2400, faultStatus: 0x0000
Ø txFreq: 0, sensitivity: 0, gainUl: 4.0, volt: 16565.9, curr:
90.4, dCycle: 0.0

3 sectors sample
USMLAP30> lhsh 001200/port_4_dev_5 fui get vswr
080521-03:26:13 10.108.243.9 7.0t RBS_NODE_MODEL_J_5_16 stopfile=/tmp/5952
$ lhsh 001200/port_4_dev_5 fui get vswr
vswr: -0.7[dB] <<<< result

PDF created with pdfFactory trial version www.pdffactory.com

 USMLAP30> lhsh 001200/port_0_dev_4 fui get vswr
080521-03:27:34 10.108.243.9 7.0t RBS_NODE_MODEL_J_5_16 stopfile=/tmp/5952
$ lhsh 001200/port_0_dev_4 fui get vswr
vswr: 24.3[dB] <<<< result

USMLAP30> lhsh 001200/port_8_dev_6 fui get vswr

080521-03:28:17 10.108.243.9 7.0t RBS_NODE_MODEL_J_5_16 stopfile=/tmp/5952
$ lhsh 001200/port_8_dev_6 fui get vswr
vswr: 24.9[dB] <<<< result

36. maxDlPowerCapability /maxDl

In RBS
Ø get local xdl
In RBS
Ø get SOGXBU_1 maximumtransmissionpower

37. redefine TD in VC
In RBS
Ø Resources for CELL does not come up – apparently TD is defined as U42
Ø lget AtmPort=MS-1-2-1,VplTp=vp1,VpcTp=1,VclTp=vc39
Ø lrset AtmPort=MS-1-2-1,VplTp=vp1,VpcTp=1,VclTp=vc39 atmTrafficDescriptorId
AtmTrafficDescriptor=C2P4000
Ø pr. Bq - must be win30
Ø pr aal2
Ø then get proxy for TransportNetwork=1,Aal2PathVccTp=ba1
Ø then lpr AtmPort=1-2-1,VplTp=vp1,VpcTp=1,VclTp=vc39
Ø get the proxy
Ø look for AtmTrafficDescriptor=C2P4000

38. Check E1 loop

In node
Ø lacc AtmPort=MS-27-1,VplTp=vp5 eteloopback

39. RBSID
In node RBS
Ø Pr iub
Ø Get the proxy NodeBFunction=1,Iub=POT3UU
Ø RBSID seen
In node RNC
Ø get iublink userlabel setomu

40. Check security turn ON in RBS or NOT

In node RBS
Ø Lt manage
Ø Lt mana (also can)
Ø 1077 ManagedElementData=1
Ø 1078 SwManagement=1
Ø get *ManagedElementData=1* proxy
Ø look for logonServerAddress
Ø if 10.125.7.201,10.125.7.202 --- then security OFF
Ø if
https://ckpgominf2:8443/ericsson/servlet/sls,https://ckpgominf3:8443/ericsso
n/servlet/sls ---- security ON

PDF created with pdfFactory trial version www.pdffactory.com

 41. Change ARFCN freq at RNC & RBS

ARFCN 10637
DL Freq (MHz) 2127.4
UL Freq (MHz) 1937.4

In node RNC
Ø get allmmu_1 arf
Ø typical values (uarfcnDl 10662 & uarfcnUl 9712 )
In node RBS
Ø get antenna fq
Ø typical values (fqBandHighEdge 10712 & fqBandLowEdge 10612)
Ø thus if requested value at RNC is 10637 and if the value is between 10612 &
10712 at RBS, change only at RNC

42. To look for host.p12 in Node B

In node RBS
Ø Ls will show you are in drive D
Ø To go to C drive: cd /c
Ø Go to java folder
Ø Ls and you will
Ø ftp 10.78.....
Ø Pw – rbs rbs
Ø Bin (make sure in Binary and not ASCII)
Ø Cd /c
Ø Cd java
Ø Put host.p12 (ensure host.p12 file in moshell folder ya)

43. To continuously ping

Ping –s 10.78.1.1101

44. To check IP connectivity

In node RNC,RXI,ATMCC,RBS
Ø lacc AtmPort=1-2-1 eteloopback
CREATE
(
parent "ManagedElement=1,TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1"
identity "vc12232"
moType VclTp
exception none
nrOfAttributes 3
userLabel String "VclTp vc12232"
externalVci Integer 12232
atmTrafficDescriptorId Ref
"ManagedElement=1,TransportNetwork=1,AtmTrafficDescriptor=U4"
)
CREATE
(
parent "ManagedElement=1,TransportNetwork=1"
identity "bCSSQBUib"
moType AtmCrossConnection
exception none
nrOfAttributes 3
userLabel String "AtmCrossConnection bCSSQBUib"
vclTpAId Ref "ManagedElement=1,TransportNetwork=1,AtmPort=MS-27-
1,VplTp=vp1,VpcTp=1,VclTp=vc12232"
vclTpBId Ref "ManagedElement=1,TransportNetwork=1,AtmPort=MS-25-
2,VplTp=vp1,VpcTp=1,VclTp=vc12233"
)

PDF created with pdfFactory trial version www.pdffactory.com

 45. To check queueSelectAlgorithm & cqiAdjustmentOn at RBS
In node RBS
Ø UEFAMU> pr carrier que
Ø
Ø 060615-14:50:24 10.78.71.129 6.1zc RBS_NODE_MODEL_H_6_2
Ø ============================================================================
=======
Ø Proxy MO
Ø ============================================================================
=======
Ø 1381 NodeBFunction=1,Sector=3,Carrier=1
Ø 1399 NodeBFunction=1,Sector=2,Carrier=1
Ø 1417 NodeBFunction=1,Sector=1,Carrier=1
Ø
Ø set 1417 queueSelectAlgorithm 0
Ø
UEFAMU> get 1417 que
060615-14:51:08 10.78.71.129 6.1zc RBS_NODE_MODEL_H_6_2
==============================================================================
MO Attribute Value
==============================================================================
Sector=1,Carrier=1 frequencyPlane 1
Sector=1,Carrier=1 queueSelectAlgorithm 1
(PROPORTIONAL_FAIR)
==============================================================================
Total: 1 MOs
UEFAMU> set 1417 queueSelectAlgorithm 0
060615-14:51:24 10.78.71.129 6.1zc RBS_NODE_MODEL_H_6_2
Set queueselectalgorithm on following MOs ?
===================================================================================
1417 NodeBFunction=1,Sector=1,Carrier=1
===================================================================================
Are you Sure [y/n] ? y
==============================================================================
Id MO
queueselectalgorithm Result
==============================================================================
1417 Sector=1,Carrier=1 0
>>> Set.
==============================================================================
Total: 1 MOs attempted, 1 MOs set
UEFAMU> get 1417 que
060615-14:51:29 10.78.71.129 6.1zc RBS_NODE_MODEL_H_6_2
==============================================================================
MO Attribute Value
==============================================================================
Sector=1,Carrier=1 frequencyPlane 1
Sector=1,Carrier=1 queueSelectAlgorithm 0
(ROUND_ROBIN)
==============================================================================
Total: 1 MOs

46. To check through logs

In nodes
Ø lgaevsmir

PDF created with pdfFactory trial version www.pdffactory.com

 47. To check RBS ID in RBS
In node RBS
Ø Get IUB

48. To check antenna Supervision Threshold

In node RBS
Ø get antenna antennaSupervisionThreshold

49. To check downlink & uplink range

In node RBS
Ø lget antenna low|high
Ø The downlink – uplink = 190x5=950

50. To check commands executed within a node

In node
Ø Lgo 1
Ø 1 for number of days

51. To add software allocations in the RBS for ETMC1

In node RBS
Ø Open EMAS
Ø Go to SoftwareAllocation
Ø Right click, Add
Ø Choose the specific board/ swallocation
Ø - fact is it will create a SWallocation ID = 1 in the rbs
Ø Use moshell to create an Undo file
Ø U+
Ø Then delete the swallocation
Ø Lt swalloc
Ø Pr swalloc
Ø Del proxy
Ø U-
Ø Then edit the undo file

52. To enable trace

In node RBS
Ø te enable bus_send bus_receive NBAP*
Ø te s Ans* (just to look at the last line)
Ø te enable bus_send bus_receive Ans_aal2ap_proc
Ø te log read | decoder.pl | tee SCO1BU.log | flow.pl –colour
Ø to place it in a log ---à te log read | decoder.pl | tee SCO1BU.log |
flow.pl –colour
Ø logs will be at /ethanap

53. To check which module the card is at

In node RBS
Ø N
Ø Mon?
Ø TargetMonitor on disk: Yes
Ø TargetMonitor loaded: No
Ø TargetMonitor started: No
Ø Mon+
Ø te status Ans*
Ø to on NBAP trace
Ø te enable bus_send bus_receive NBAP
Ø to see if NBAP trace is ON or NOT
Ø te status NBAP

PDF created with pdfFactory trial version www.pdffactory.com

 Ø $ te status NBAP
Ø pid name enabled groups
Ø - NBAP check error info bus_send bus_receive interface object
Ø To disable ---à te disable bus_send bus_receive NBAP
Ø Check status again
Ø $ te status NBAP
Ø pid name enabled groups
Ø - NBAP check error info interface object
In node TeraTerm
Ø User = eric
Ø Pw = ericsson
Ø Monitor 10.78.xx.xx

54. To check commands sent in node

In node RNC, RBS, RXI
Ø hi

55. To check external Open Door alarm in RBS is set to which probable cause
In node RBS
Ø Pr almdevice
Ø Get proxy (either 2 / 1 or 9)
Ø Usually 9 for RBS door and 2 for BBU door
Ø Some put 1 for BBU door
Ø Get proxy for parameter check
Ø Lock proxy to change probableCause
Ø Bl 54
Ø probableCause 522 à power supply
Ø probableCause 118 à enclosure_door_open_m3100
Ø set 54 probableCause 118
Ø then unlock back proxy
Ø deb 54

56. To calibrate RET via moshell

In node RBS
Ø Lpr ret
Ø Acl proxy
Ø 253
Equipment=1,SectorAntenna=3,AuxPlugInUnit=2,RetuDeviceGroup=1,RetDeviceSet=1
,RetDevice=1
Ø acc 267 forceCalibration
Ø alarm will go away in 2 minutes approx

PDF created with pdfFactory trial version www.pdffactory.com