This document provides information about the KYL-813 wireless switch input and output module, including its specifications, functions, and applications. The KYL-813 is a wireless transmission equipment with 4 input channels and 2 output relay channels. It can transmit input switching conditions in real-time between a transmitter and receiver located up to 3km apart. The document describes the module's performance characteristics, parameter setting process, connection definitions, and provides examples of using the KYL-813 for one-to-one transmission and networked acquisition modes.
This document provides information about the KYL-813 wireless switch input and output module, including its specifications, functions, and applications. The KYL-813 is a wireless transmission equipment with 4 input channels and 2 output relay channels. It can transmit input switching conditions in real-time between a transmitter and receiver located up to 3km apart. The document describes the module's performance characteristics, parameter setting process, connection definitions, and provides examples of using the KYL-813 for one-to-one transmission and networked acquisition modes.
Shenzhen KYL Communication Equipment Co., Ltd includes: 1) module's ID: from 000-255 2) Working channel: there are 16 channel default. Each channel corresponds to different frequency. 3) work mode: Timer/Triggered/acquisit mode. 4)Host/Slave: it’s affective under Timer mode,host sends data according to the set interval,slave receives data and feedbacks to host.
（Ⅴ）How to use the software
1) connect the module with PC, activate the software KYL-81X. Exe to choose correct COM. 2) power supply for the module. If everything OK, module shows connect OK. Then user can change parameter according to requirements.
（Ⅵ）How to use the software
1)assemble the module with antenna;
2)set the communication parameter through our standard program cable
according to requirements,including:
A. work mode:when it’s one-to-one use,please choose timer mode or
triggered mode.
B.work channel:set the same channel for the modules that communicate
with each other,channels 1-16 are available to set.
C. Module ID. When it’s one-to-one use,ID of two module that
communicate with each other must be the same;when it’s
acquisition mode, different module must be set different ID,the host
can query different module according to ID.
D. When it’s timer mode, you still need to set Host/Sub,Tx Time,Error，
Alarm time.
3)disconnect the program cable,connect the KYL-813,input switch and
output switch devices.
Tel: +0086-755-86643962 E_mail: [email protected]； www.rf-data.com Shenzhen KYL Communication Equipment Co., Ltd 4)Connect power (9-15v)and turn on the power switch,the output current
must be at least 500mA.
5)If KYL-813 is under acquisition mode, then user host only needs to
connect 1 wireless module,then send acquisition command through
wireless module,as the following picture shows. Under acquisition
mode, users can revise the parameter of KYL-813 through wireless
Shenzhen KYL Communication Equipment Co., Ltd (Ⅸ)Connection Definition Connection name Pin No. Definition Remarks CN1 1 VCC DC 12V (9-15V) 2 GND Power supply 3 GND ４ INT1 ５ GND 6 INT2 7 OUT1A First channel relay output When the relay shutting，Ａand A contact Ｂconnected 8 OUT1B First channel relay output B contact 9 OUT2A Second channel relay When the relay shutting，Ａand output A contact Ｂconnected 10 OUT2B Second channel relay output B contact CN2 1 RXD Receiving data Enter the setting mode for the 2 TXD Transmitting data module, and the function of the interface will be effective 3 GND Ground of the signal 4 GND Ground of the signal Programme controlling ， low 5 PRO SET Programme controlling level.Connect the signal ground, then will enter the programme controlling mode 6 NC ANT ANT Antenna port
(Ⅹ) Application Example
1,One to one transmitting
1)work mode set Timer or triggered mode, 1 set switch/button can control alert light or engine several miles away. 2)Sending input signal can be 1 set dip switch,button or high/low level voltage 3)Receiving output signal can drive alert light,moter,engine,electromagnetic valve or PLC. Tel: +0086-755-86643962 E_mail: [email protected]； www.rf-data.com Shenzhen KYL Communication Equipment Co., Ltd 4)Two KYL-813 communicate with each other,its ID and work channel must be the same. 2,Modbus host/slave networking mode 1)slave KYL-813 set acquisition mode, 2)Host is a PC or a touch screen that connects wireless transmission module 3)Host and KYL-813 use the same Modbus RTU protocol 4)Host must have the same work channel as KYL-813
The above picture is acquisition mode networking schematic diagram
(Ⅺ) Other Applications of KYL-813
Except ont-to-one transmission and one host to several slaves control under acquisition mode,KYL-813 with other switch transmission modules(KYL-815 and KYL-818) can achieve centralized control and centralized output etc.(those functions must be assigned before purchasing)
The above picture shows 4pcs KYL-813(803) control 1pc KYL-815(805)
