SUBJECT NAME: Microprocessor

SUBJECT CODE: 203107255

Subject Teacher: Rohit. M. Joshi

Contact No: 9974955903
Email..rohit.joshi17510@paruluniversity.ac.in

1
 What is Microprocessor?
 A microprocessor is a programmable electronics chip
that has computing and decision making capabilities
similar to central processing unit of a computer.
 It is clock driven IC
 It is Si type of semiconductor chip which contain no.
of transistors. I/P Microprocessor
 It is register array based device. O/P
 Microprocessor is used as multipurpose
Technology Used: The semiconductor manufacturing technologies used
for chips are:
 Transistor-Transistor Logic (TTL)
 Emitter Coupled Logic (ECL)
 Complementary Metal-Oxide Semiconductor (CMOS)
2
Classification of Microprocessors:
Based on size of data bus:
Based on architecture:
 4-bit microprocessor
 Reduced Instruction Set
 8-bit microprocessor
Computer (RISC) processors
 16-bit microprocessor
 Complex Instruction Set
 32-bit microprocessor
Computer (CISC) processors
Based on application:
 General-purpose microprocessor- used in general computer system and
can be used by programmer for any application. Examples, 8085 to
Intel Pentium.
 Microcontroller- microprocessor with built-in memory and ports and
can be programmed for any generic control application. Example,
8051.
 Special-purpose processors- designed to handle special functions
required for an application. Examples, digital signal processors and
application-specific integrated circuit (ASIC) chips.
3
History of Microprocessors:

4
4-BIT
MICROPROCESSORS

5
INTEL 4004
 Introduced in 1971.

It was the first

microprocessor by Intel.

 It was a 4-bit µP.

 Its clock speed was

740KHz.

 It had 2,300 transistors.

 It could execute around

60,000 instructions per
second. 5

6
INTEL 4040
 Introduced in 1974.
 It was also 4-bit µP.

7
8-BIT
MICROPROCESSORS

8
INTEL 8008
 Introduced in 1972.
 It was first 8-bit µP.
 Its clock speed was 500
KHz.
 Could execute 50,000
instructions per second.

9
INTEL 8080
 Introduced in 1974.
 It was also 8-bit µP.
 Its clock speed was 2
MHz.
 It had 6,000 transistors.
 Was 10 times faster than
8008.
 Could execute 5,00,000
instructions per second. 9

10
INTEL 8085  Introduced in 1976.
 It was also 8-bit µP.
 Its clock speed was 3 MHz.
 Its data bus is 8-bit and
address bus is 16-bit.
 It had 6,500 transistors.
 Could execute 7,69,230
instructions per second.
 It could access 64 KB of
memory.
10
 It had 246 instructions.
11
16-BIT
MICROPROCESSORS

11

12
  Introduced in 1978.

INTEL 8086  It was first 16-bit µP.

 Its clock speed is 4.77 MHz, 8

MHz and 10 MHz, depending on
the version.

 Its data bus is 16-bit and

address bus is 20-bit.

 It had 29,000 transistors.

 Could execute 2.5 million

instructions per second.

 It could access 1 MB of memory.

 It had 22,000 instructions.

 It had Multiply and Divide 12
instructions.
13
INTEL 8088
 Introduced in 1979.

 It was also 16-bit µP.

 It was created as a cheaper

version of Intel’s 8086.

 It was a 16-bit processor with

an 8-bit external bus.

13

14
INTEL 80186 & 80188
 Introduced in 1982.
 They were 16-bit µPs.
 Clock speed was 6 MHz.

14

15
INTEL 80286
 Introduced in 1982.

 It was 16-bit µP.

 Its clock speed was 8 MHz.

15

16
32-BIT
MICROPROCESSORS

16

17
  Introduced in 1986.
 It was first 32-bit µP.
INTEL 80386  Its data bus is 32-bit and
address bus is 32-bit.
 It could address 4 GB of
memory.

17

18
  Introduced in 1989.
INTEL 80486  It was also 32-bit µP.
 It had 1.2 million transistors.
 Its clock speed varied from 16
MHz to 100 MHz depending
upon the various versions.

18

19
  Introduced in 1993.
INTEL PENTIUM  It was also 32-bit µP.

 It was originally named 80586.

 Its clock speed was 66 MHz.

19

20
INTEL PENTIUM PRO
 Introduced in 1995.
 It was also 32-bit µP.

21
INTEL PENTIUM II
 Introduced in 1997.
 It was also 32-bit µP.

21

22
INTEL PENTIUM II XEON
 Introduced in 1998.

 It was also 32-bit µP.

22

23
INTEL PENTIUM III
 Introduced in 1999.
 It was also 32-bit µP.

23

24
INTEL PENTIUM IV
 Introduced in 2000.

 It was also 32-bit µP.

24

25
  Introduced in 2006.
INTEL DUAL CORE  It is 32-bit or 64-bit µP.
 It has two cores.
 Both the cores have there
own internal bus and L1
cache, but share the
external bus and L2 cache

25

26
 26

27
64-BIT
MICROPROCESSORS

27

28
INTEL CORE 2
 Introduced in 2006.
 It is a 64-bit µP.

28

29
INTEL CORE I7
 Introduced in 2008.
 It is a 64-bit µP.

29

30
INTEL CORE I5
 Introduced in 2009.
 It is a 64-bit µP.

30

31
INTEL CORE I3
 Introduced in 2010.
 It is a 64-bit µP.

31

32
33
Formal structure of Microprocessors:

34
 Bit: A bit is a single binary digit.
 Word: A word refers to the basic data size or bit size that can be processed by the
arithmetic and logic unit of the processor. A 16-bit binary number is called a word in
a 16-bit processor.
 Bus: A bus is a group of wires/lines that carry similar information.
 System Bus: The system bus is a group of wires/lines used for communication
between the microprocessor and peripherals.
 Memory Word: The number of bits that can be stored in a register or memory
element is called a memory word.
 Address Bus: It carries the address, which is a unique binary pattern used to identify
a memory location or an I/O port. For example, an eight bit address bus has eight
lines and thus it can address 28 = 256 different locations. The locations in
hexadecimal format can be written as 00H – FFH.
 Data Bus: The data bus is used to transfer data between memory and processor or
between I/O device and processor. For example, an 8-bit processor will generally
have an 8-bit data bus and a 16-bit processor will have 16-bit data bus.
 Control Bus: The control bus carry control signals, which consists of signals for
selection of memory or I/O device from the given address, direction of data transfer
and synchronization of data transfer in case of slow devices.

35
Language of Microprocessors:
Each microprocessor has a set of instructions, a list which is provided
by the microprocessor manufacturer. The instruction set of a
microprocessor is provided in two forms: binary machine code and
mnemonics.
Microprocessor communicates and operates in binary numbers 0 and 1.
The set of instructions in the form of binary patterns is called a machine
language
and it is difficult for us to understand. Therefore, the binary patterns are
given abbreviated names, called mnemonics, which forms the assembly
language.
The conversion of assembly-level language into binary machine-level
language is done by using an application called assembler.

36
Microprocessors Vs Microcontroller:

37
Microprocessors Vs Microcontroller:

38
Application - <<Microprocessor>>

39
40
THANK YOU

41